1/8" Shank Long Taper 1/8" (Fine Grit)

1/8" Shank Long Taper 1/8" (Fine

Saburr-Tooth carving burr "Power Carving" rotary tools feature long-lasting, razor-sharp carbide cutting teeth arranged into a unique open pattern to resist "loading" while providing the "Power Carver" rapid stock removal and smoother finishes Industries Ideal for use on Wood, Rubber, Silicone, Plastic, Foam, Bone, Ice, Polyurethane, Epoxies, Acrylics, Composites, Graphite, Soap Stone, and Alabaster.

  • Color: Yellow
  • Brand: Saburr Tooth
  • ASIN: B072LW83YC
  • UPC: 705604515935

1/8" Shank Long Taper 1/8" (Coarse Grit)

1/8" Shank Long Taper 1/8" (Coarse

Saburr-Tooth carving burr "Power Carving" rotary tools feature long-lasting, razor-sharp carbide cutting teeth arranged into a unique open pattern to resist "loading" while providing the "Power Carver" rapid stock removal and smoother finishes Industries Ideal for use on Wood, Rubber, Silicone, Plastic, Foam, Bone, Ice, Polyurethane, Epoxies, Acrylics, Composites, Graphite, Soap Stone, and Alabaster.

  • Color: Green
  • Brand: Saburr Tooth
  • ASIN: B072LWGMKW
  • UPC: 705604515942

Yonico 32210-SC CNC Router Bit Down Cut Solid Carbide with 1/8-Inch X 1/2-Inch X 1/4-Inch X 2-Inch 1/4-Inch Shank

Yonico 32210-SC CNC Router Bit Down Cut Solid

Best used for: Laminate or veneer-finish plunging and dadoing.• Cutting Diameter: 1/8" • Cutting Height: 1/2" • Shank Diameter: 1/4" • Overall Length: 2" • Flutes: 2 Down cut end mills shear in a downward direction causing the uppermost layer of the material to be pressed down against the material just below it. This motion leaves a perfectly clean top surface edge. A concentration of wood chips in the work path will occur. Hose away excess wood chips to prevent bit breakage.

  • Brand: Yonico
  • ASIN: B00KZM3F1E
  • UPC: 765573829631

Kodiak Cutting Tools KCT136442 USA Made Premium Carbide End Mill, Long Series, 4 Flute, 1/8" Shank, 3/4" Length of Cut, 2-1/4" Overall Length, 1/8" Diameter

Kodiak Cutting Tools KCT136442 USA Made Premium Carbide

1/8 Inch Diameter Solid Carbide End Mill - Long 1/8" Shank 3/4" Length of Cut 2-1/4" Overall Length 4 Flute Carbide - Long Series.

  • Brand: Kodiak Cutting Tools
  • ASIN: B007BTPAJE

1/8" Shank Long Cylinder Safe End 1/8" (Fine Grit)

1/8" Shank Long Cylinder Safe End 1/8" (Fine

Saburr-Tooth carving burr "Power Carving" rotary tools feature long-lasting, razor-sharp carbide cutting teeth arranged into a unique open pattern to resist "loading" while providing the "Power Carver" rapid stock removal and smoother finishes Industries Ideal for use on Wood, Rubber, Silicone, Plastic, Foam, Bone, Ice, Polyurethane, Epoxies, Acrylics, Composites, Graphite, Soap Stone, and Alabaster.

  • Color: Yellow
  • Brand: Saburr Tooth
  • ASIN: B074MF6B56
  • UPC: 611355899197

Owner Ultrahead Round Jig Hook, 1/8-Ounce

Owner Ultrahead Round Jig Hook,

Features a versatile round jig head molded around an Owner 5318 light wire jig hook, with round bend, Super Needle Point and black matte finish.

  • Color: Metallic Silver
  • Brand: Owner American
  • ASIN: B003CU8FQG
  • UPC: 054831007615

YG-1 E5018 Carbide Ball Nose End Mill, Extra Long Reach, TIALN Multilayer Finish, 30 Deg Helix, 2 Flutes, 3" Overall Length, 0.125" Cutting Diameter, 0.125" Shank Diameter

YG-1 E5018 Carbide Ball Nose End Mill, Extra

The YG-1 E5018TF TiAlN-coated carbide extra-long-length ball nose end mill has two flutes and a 30-degree helix angle for machining on steel, chromium-nickel steel, and malleable cast iron. Extra-long-length end mills have longer cutting edges than long-length end mills for applications with a high depth of cut. (Feed should be reduced by around 50%.) The two flutes have better chip-carrying capacity than end mills with more flutes while offering additional support when the tool goes deep into the material in applications with a high depth of cut. The tool’s ball nose creates contoured surfaces where sharp corners are not required. The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action. The center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. The TiAlN coating resists heat better than TiN and TiCN coatings, increasing tool life and performance. It also offers increased hardness compared to TiN and may reduce the need for lubricants based on the application. The carbide substrate is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and provi...

  • Brand: YG-1
  • ASIN: B0080D4XG6

7pc x 12" long BRAD POINT WOOD DRILL BIT SET 1/8 3/16 1/4 5/16 3/8 7/16 1/2"

7pc x 12" long BRAD POINT WOOD DRILL

7pc x 12" long BRAD POINT WOOD DRILL BIT SET 1/8 3/16 1/4 5/16 3/8 7/16 1/2" Industrial quality for smooth accurate drilling. Brad Point starts bit drilling on center, eliminates the need for a center punch. 12" long, perfect for thick pieces of wood Sizes include:1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2". Tapered shank on the two largest bits to fit in 3/8" drills.

  • Brand: jack shop
  • ASIN: B01E6VIJK6
  • UPC: 653395403149

Kempston 501011 Keyhole Bit 1/4-Inch Shank, 3/8-Inch Cutting Diameter, 1/8-Inch Cutting Length

Kempston 501011 Keyhole Bit 1/4-Inch Shank, 3/8-Inch Cutting

  • Brand: Kempston Corporation
  • ASIN: B0013KXSMS
  • UPC: 687461640114

Breynet Leather Edge Burnisher Leather Slicker Tool Drill Set Kit 1/8" (3mm) Shank for Dremel Rotary Tool (Long + Short)

Breynet Leather Edge Burnisher Leather Slicker Tool Drill

Material:Wood+Metal Long:70mm/2.76''(Approx.) Short:60mm/2.36(Approx.)

  • Brand: Breynet
  • ASIN: B07CHMYT48
  • UPC: 764560277035

ISO 2283:2000, Long shank taps with nominal diameters from M3 to M24 and 1/8 in to 1 in - Reduced shank taps

ISO 2283:2000, Long shank taps with nominal diameters

This International Standard specifies the dimensions for reduced shank taps with nominal diameters from M3 to M24 and 1/8 in to 1 in and thus complements ISO 8051 which concerns full-diameter shank taps.It applies to long shank machine taps.Technical specifications for taps covered by this International Standard (including marking) are given in ISO 8830.This International Standard is applicable to taps intended for cutting the following threads:ISO metric threadscoarse pitch; fine pitch.ISO inch threads“Unified Coarse” series (UNC) and “Unified Fine” series (UNF). The following non-recommended inch threads“British Standard Whitworth” (BSW) and “British Standard Fine” (BSF); “British Association" (BA) are given in Annex A. This title may contain less than 24 pages of technical content.

  • ASIN: B000XYSLZY

Neepanda 10 Pack Hex Magnetic Head Allen Wrench Drill Bits - 1/4 Inch Quick Release Hex Shank Screwdriver Set - (2 Inch Long, Solid S2 Steel Alloy, 1.5/2/2.5/3/4/5/6/8/10/12 mm) (10 Sizes)

Neepanda 10 Pack Hex Magnetic Head Allen Wrench

These industrial grade hex key allen key bits made from High quality S2 steel material,used in a car, truck, atv, dirt bike, motocross bike, bicycle, mountain bike, and even furniture etc. They are perfect for any automotive job, and they also make the perfect furniture assembly tool / furniture repair tool, using your Drill to tighten and help put together your next Ikea-type piece. These hex key power driver bits are way faster than a standard furniture wrench or a t-handle furniture bit wrench. The hex key allen key bits hardness of up to 64 or so(HRC), high strength Solid S2 Steel Alloy provide superior torque for greater turning power finish, allen bits with corrosion resistance and anti-rust. Brand: Neepanda Hex Drill Bits Specification: Material: Solid S2 Steel Alloy Type: Hex Head Length: 50mm(2 inch) Type of shank: 6.35mm / 1/4 inch hex head Size: 1/4*50*1.5mm 1/4*50*2mm 1/4*50*2.5mm 1/4*50*3mm 1/4*50*4mm 1/4*50*5mm 1/4*50*6mm 1/4*50*8mm 1/4*50*10mm 1/4*50*12mm Package Include: 10 X Hex Head Drill Bits 1 X Storage Case Note: ●All dimensions are measured manually and there may be small deviations.Click 'Add to Cart' button above to Order Now. Thank you for your trust on Neepanda. We will work harder to make the product better !

  • Brand: Neepanda
  • ASIN: B07H1SW224
  • UPC: 611830787018

Straight Router Bit, EnPoint Double Flute Straight Bit Carbide 1/8" Shank 1/8" Cutter Dia 25mm Length Precision Ground Straight Bit Cutting Joinery Grooves Rabbets CNC Engraving Tool Bit

Straight Router Bit, EnPoint Double Flute Straight Bit

Specification Bit Type: Straight Material: Solid carbide Flute length: 25 mm Total length: 45mm Cutter diameter: 3.175 mm Shank diameter: 3.175 mm   Application: Used for engraving and cutting a wide variety of materials: bubble teflon plate, acrylic, fiber board, plywood, multilayer board, solid wood, sandwich panels and PVC etc.

  • Color: 25mm flute length
  • Brand: EnPoint
  • ASIN: B00YC4F1IQ
  • UPC: 706795869913

Weiler 26096-1" Cup Brush with 7/16" Long x Straight Hair Bristles, 1/8" Shank, up to 25000 RPM, Pack of 15

Weiler 26096-1" Cup Brush with 7/16" Long x

Specification: diameter: 1 intrim length: 7/16 inshank diameter: 1/8 inmount type: Shankbristle material: Hairmaximum rpm: 25000 RPMbristle type: Straightspecification: ANSI B165.1

  • ASIN: B07DHHG1DB

Amana Tool 46040 Solid Carbide Spiral 1/8 Dia x 1/2 Cut Height x 1/4 Shank x 2 Inch Long Composite, Fiberglass & Phenolic Cutting ZrN Coated 2 Flute Up-Cut Router Bit by Amana

Amana Tool 46040 Solid Carbide Spiral 1/8 Dia

  • ASIN: B01N44GDA0
  • UPC: 735090165802

7 Pieces - 12" Extra Long Brad Point Drill Bits 1/8 3/16 1/4 5/16 3/8 1/2 7/16 ½ - 3/8 Shank Fit Dewalt Makita Ryobi Milwaukee Power Drill etc

7 Pieces - 12" Extra Long Brad Point

  • Brand: UI PRO TOOLS
  • ASIN: B01HIU7N1I
  • UPC: 719936242414

1/8" Shank Long Cylinder 1/8" (Coarse Grit)

1/8" Shank Long Cylinder 1/8" (Coarse

Saburr-Tooth carving burr "Power Carving" rotary tools feature long-lasting, razor-sharp carbide cutting teeth arranged into a unique open pattern to resist "loading" while providing the "Power Carver" rapid stock removal and smoother finishes Industries Ideal for use on Wood, Rubber, Silicone, Plastic, Foam, Bone, Ice, Polyurethane, Epoxies, Acrylics, Composites, Graphite, Soap Stone, and Alabaster.

  • Color: Green
  • Brand: Saburr Tooth
  • ASIN: B074MDM1ZH
  • UPC: 611355899180

10pcs 1/8" Tungsten Carbide Rotary Drill Bit,8mm Rotary Point Burr Die Grinder 6mm Shank Bit Set for Die Grinder Drill, Polishing, Engraving, Drilling, DIY Wood-working Carving, MetalCarving (Silver)

10pcs 1/8" Tungsten Carbide Rotary Drill Bit,8mm Rotary

Features: Material: Tungsten Carbide Case Size: Approx.10x6cm/3.94x2.36" Shank Diameter: 3mm(about 1/8") Hardmetal burrs used in pneumatic or electric tools, speed is 6000-40000 rpm, must clamp tool From right to left direction of cutting uniform movement, not like the use of wheel for reciprocating cutting Be careful not to overexert (pressure is generally not more than 4kg) Tungsten steel Solid Carbide Burrs for DIY enthusiast or hobby and craft fan, and give your rotary tool even more functionality with this set of burrs Package Included: 1 x Tungsten Carbide Rotary Burr Drill Bits Set 1 x Box

  • Color: Silver
  • Brand: Ljnuanrg
  • ASIN: B07Q4T185B

Integra Tools 5/32" 3/16" 7/32" 18 Piece Mix Diamond Chainsaw Sharpener Burr 1/8" Shank

Integra Tools 5/32" 3/16" 7/32" 18 Piece Mix

Integra Tools 18 Piece Mix Pack of High Quality Sharpener Burrs made for superior durability. . Integra Tools chainsaw diamond sharpener burrs will outperform most and provide a longer sharpener cutting edge at 1-1/4". . Designed to fit most rotary tools. . Features: . Quantity: 6 Burrs Total length: 2-1/2" Cutting edge length: 1-1/4" Shank Diameter: 1/8" Burr diameter: 5/32" Grit: 120-150 . Quantity: 6 Burrs Total length: 2-1/2" Cutting edge length: 1-1/4" Shank Diameter: 1/8" Burr diameter: 3/16" Grit: 120-150 . Quantity: 6 Burrs Total length: 2-1/2" Cutting edge length: 1-1/4" Shank Diameter: 1/8" Burr diameter: 7/32" Grit: 120-150

  • Color: Silver
  • Brand: Interga
  • ASIN: B06XJ4RN65
  • UPC: 697046061494

Dremel 4485 Quick Change Collet Nut Kit

Dremel 4485 Quick Change Collet Nut

Quick change collet nut kit, includes 1 each #480, #481, #482 & #483.

  • Color: As the picture shown
  • Brand: Dremel
  • ASIN: B0000302Z6
  • UPC: 745352383004

Drill Bits PCB Drill - DB-P4 10pcs 1.0mm Carbide Bits 1/8 Inch Shank Titanium Coated Engraving Bits - 10x Carbide End Mills More D

Drill Bits PCB Drill - DB-P4 10pcs 1.0mm

Description: Drillpro DB-P4 10pcs 1.0mm Diameter Carbide 1/8 Inch Shank Titanium Coated Engraving Bits Corn milling coating using imported materials, sharp tip has high dimensional accuracy, good chip performance, chip sharp, long life, suitable for all kinds of sheet metal, especially for high TG, and protection boards and other high hardness plate processing. High bending strength and high hardness and high wear anti-demolition loss coupled with and other advantages. Specification: Model: DB-P4 Material: Carbide Coating: Titanium Blade Diameter: Approx.1.0mm Shank Diameter: Approx.3.175mm / 1/8" Total Length:37mm Quantity: 10pcs Application: mainly used for engraving, milling groove, hole, plate edge processing Features: The use of ultra-fine grain hard alloy material, with good milling, cutting performance, to ensure that the work efficiency; Nano coating to the hardness, super bending strength and wear resistance, long service life; Milling groove, hole and plate edge, surface clean, neat, without burr. Package Included: 10x Carbide End Mills  More Details:

  • Brand: Unknown
  • ASIN: B07RDK47DX

Whiteside Router Bits RD1600 Standard Spiral Bit with Down Cut Solid Carbide 1/8-Inch Cutting Diameter and 1/2-Inch Cutting Length

Whiteside Router Bits RD1600 Standard Spiral Bit with

Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction. Several woodworking magazines have tested Whiteside versus the competition and selected Whiteside as the winner for best router bits available in the market. Whiteside Machine Company was founded in 1970 as a general purpose machine shop in the basement of Bill & Bobbie Whiteside's home. Located in Western North Carolina near the furniture manufacturing town of Hickory, the company was often involved in making repairs or special parts for the furniture and woodworking field. A strong commitment to customer problem-solving, a can-do attitude, and innovative ideas, along with a growing core of dedicated employees, helped the business evolve into a manufacturer of woodworking equipment and tooling. Primarily through repeat business and referrals, the tooling business continued to grow to meet a demand for quality production router bits as well as custom application tooling. Today, Whiteside Machine occupies a 40,000 sq. ft. manufacturing facility and produces a complete line of solid carbide and carbide tipped router bits. Whiteside's quality, innovation, and customer commitment is still pr...

  • Brand: Whiteside Router Bits
  • ASIN: B000K2FI8M
  • UPC: 732454423509

Brewery Gaskets 25-Pack EPDM Beer Line Coupling Washer

Brewery Gaskets 25-Pack EPDM Beer Line Coupling

Standard size keg coupler gasket aka Beer Nut Washer. 13/16" outer diameter, 1/2" inner diameter and 1/8" thickness. FDA EPDM is preferred material over Neoprene for long lasting and non-leaching. Manufactured by Jet Gasket & Seal

  • Color: Black EPDM
  • Brand: Brewery Gaskets
  • ASIN: B01BFK92IO
  • UPC: 799975036960

MAKARTT Tungsten Carbide Nail Drill Bits Set 7Pcs B-08 Remove Acrylic Nail Polish Dipping Powder Extension Gel

MAKARTT Tungsten Carbide Nail Drill Bits Set 7Pcs

Makartt Nail Drill Bit Set -7pcs /set Makartt's Carbide Tungsten Steel Nail Set features 6 different tools and 1 brush so you can clean, sharpen, grind, neaten, carve, smoothen, polish and reshape gel nails, and stimulate nail growth. Looking after your nails is as important as grooming and making them beautiful. That's why the Makartt Tungsten CarbideNail Set features 7 different nail tools for care as well as beauty and pampering. No matter what you want - manicure, pedicure, cuticle trimming, and even carving under the nail - there is a tool for you. The set can even be used with gel and acrylic nails to smooth them out. Features: Color : White Base The set includes 6 tools which can do the following: sharpen extra thick or rough nails; grind nails or trim the cuticle; stimulate nail growth; remove dead skin; clean and neaten the cuticle or the underside of the nail; carve deep underneath the nail; polish and reshape gel and acrylic nails; and smoothen nail edges. For general nail care the set can be used to cut the cuticle, the sides of the nails, or to remove dirt from underneath the nail. The set has been specifically designed to protect the skin from being harmed and to give results that rival anything from a salon. Corrosion and heat resistant carbine material with long l...

  • Color: Colorful Nail Drill Bits
  • Brand: Makartt
  • ASIN: B078RF1KQV

Teva Men's Terra FI 4 Sandal, Madang Olive Webbing, 11 M US

Teva Men's Terra FI 4 Sandal, Madang Olive

Teva was born in the grand canyon back in 1984, when a river guide rigged two velcro watchbands to an old pari of flip flops and created a shoe that wouldn't float away. Three decades later, we've grown up into an icon of comfort and utilitarian style

  • Color: Madang Olive Webbing
  • Brand: Teva
  • ASIN: B00KXIL1J8
  • UPC: 737045268262

Acko #1 Coin and Small Parts Envelopes 2-1/4 x 3-1/2 Brown Kraft Envelopes with Gummed Flap for Home or Office or Garden Use

Acko #1 Coin and Small Parts Envelopes 2-1/4

These small, open-end, 28 lb. brown kraft coin envelopes are ideal for small parts, samples, seeds, enclosures, loose coins,keys , jewelry and payroll applications. Their gummed flaps provide a secure seal. Product Information Mailer/Envelope Type: Coin Mailer/Envelope Classification: #1 Size:2 1/4 x 3 1/2 Closure Type:Gummed (Extra-deep gummed flap ) Closure Side: Open End Wide seam construction.

  • Brand: Acko
  • ASIN: B01LCLTS1M
  • UPC: 645905744521

Greenten Guitar Strap Buttons 1 Set of 2Pcs (Chrome)

Greenten Guitar Strap Buttons 1 Set of 2Pcs

100% brand new  high quality and testing is fine Item 100% like the picture shown These are a modern design which would look great on any your guitar This includes the installation screws and brand new felts. Set of 2 strap buttons color:Chorme Package Included:1 x Pair black Strap buttons

  • Color: Ghrome
  • Brand: Greenten
  • ASIN: B0191EB9MS
  • UPC: 634458702218

GLS Audio 1/4" Jacks Female TS Mono Panel Mount Jack - 4 PACK

GLS Audio 1/4" Jacks Female TS Mono Panel

We are offering these new Professional Series Female 1/4" Mono TS (Tip / Sleeve) Panel Jacks by GLS Audio. They are full metal construction and you will notice that they have the high quality Fiberglass Insulators (not the cheap plastic insulators). These aren't your typical flimsy generic plastic jacks like other people sell. Sure, the GENERIC 1/4" jacks may be a LITTLE cheaper in price, but they are a lot cheaper in quality. Who wants a cheap jack that will break in no time? The GLS Audio 1/4" jacks are very Heavy Duty and comparable to Switchcraft #11 and Neutrik.

  • Brand: GLS Audio
  • ASIN: B00CMXRLXM
  • UPC: 814422014152

Stand Up Head, 1/8 OZ, 2X Long, Matte Brown, Sz3/0 3PK

Stand Up Head, 1/8 OZ, 2X Long, Matte

The Mustad Elite Series Stand Up Head are the product of 18 months of development and intensive work with Mustad pro staffers, Edwin Evers, Kevin VanDam and Mark Rose, among others. The jig head is specially designed to stand up from the bottom and wriggle from the slightest twitch of the rod, imitating a feeding baitfish, frog or defensive crawfish. 2X extra long shank will accommodate a whole range of soft plastic lures, shads, crawlers or frogs. Mustad used a proprietary injection molding technique to create these new 100% unique jig heads fitted with a precisely aligned screw keeper for perfect stand-up presentation. Each hook is forged and has black nickel finish. They also feature Mustad’s Opti Angle Needle hook point for faster hook sets and maximum durability.

  • Color: Matte Brown
  • Brand: Mustad
  • ASIN: B01M0VT20L
  • UPC: 023534041127

10Pcs CNC Router Bits, Drillpro 1/8" Single Flute End Mill Cutter for Wood, Nylon, Resin, ABS, Acrylic, PVC, MDF

10Pcs CNC Router Bits, Drillpro 1/8" Single Flute

Drillpro 10Pcs 1/8" Single Flute CNC Router Bits Feature: ▶HIGH EFFICIENCY: CNC Router Bit owns sharp edge, which is able for fast engraving that makes high efficiency, the cutting edge length is 22mm ( 1/8 inch) approx. ▶SUPER CHIP REMOVAL: Design of CNC Router Bit is oversized spiral and discharge chips, to prevent sticking knife, raising production efficiency. ▶PERFECT CUTTING: The mirror polishing of CNC Router Bit makes smooth cutting,non-stick crumbs, not black, increase the speed. ▶WIDE APPLICATION: CNC Router Bit is capable to use in materials such as hardwood, medium density board,Nylon, Resin, ABS, Acrylic, PVC, MDF, etc. ▶USAGES: Carving, Cutting, Slotting, Milling, Hollow Cutting ▶SUITABLE MATERIALS: Acrylic, PVC, MDF, medium-density board, lotus board, Solid wood, wood, plastic plate, double color sheet, hardwood,Nylon, Resin, ABS, Aluminium etc. Specifications: -Color: Silver -Material: CNC -Total length: 50mm = 2 inch -Shank diameter (SD): 3.175mm = 1/8 inch -Cutting edge length (CEL): 25mm = 1 inch -Cutting edge diameter (CED): 3.175mm = 1/8 inch Package included: 10 x 1/8" Single Flute Carbide Spiral CNC Router Bit Note: ●Stop immediately in the processing of anomalies when using the CNC Router Bit and find out the reason before processing; ●Pay...

  • Color: 10Pcs CNC Router Bits
  • Brand: DRILLPRO
  • ASIN: B077BQW5TR

SK Hand Tool 82154 1/4-Inch Shank Long Hex Bit Socket, 1/8-Inch

SK Hand Tool 82154 1/4-Inch Shank Long Hex

SK Hand Tool is here to support you with a full line of hand tools that are made in the USA. It is a SK Hand tool product. Replacement bit.

  • Brand: SK Hand Tool
  • ASIN: B00DSSOGLA
  • UPC: 025141018288

Tiean 10 Pcs/Set HSS Titanium Router Bits Wood Cutter Milling Fits Rotary Engraving (Silver)

Tiean 10 Pcs/Set HSS Titanium Router Bits Wood

Features: These cutters are made from high speed steel for high hardness and long service life. Surface is coated with titanium or not for anti-oxidation and makes these cutters more durable. Large capacity chip groove and sharp cutting edge would improve working efficiency and product quality. Specifications: Material: High speed steel Surface Finishing: Titanium plating Shank Diameter: 3.175mm(1/8") Length: Approx. 40mm(1.57") Package Includes: 1 x Slot cutter Diameter 3.2mm 1 x Slot cutter Diameter 5.0mm 1 x Slot cutter Diameter 6.5mm 1 x Rounding over cutter Diameter 6.4mm 1 x V-slot cutter Diameter 6.5mm 1 x Combi cutter 6.5/2.5mm 1 x Core box bit 3.2mm radius 1 x Rebating cutter 6.4mm 1 x Edge cutter with pin Diameter 5.0mm 1 x Half round cutter Diameter 13mm

  • Color: Silver
  • Brand: Tiean
  • ASIN: B078MNGYZK
  • UPC: 664800180241

1/8" Shank Long Ball Nose 1/8" (Coarse Grit)

1/8" Shank Long Ball Nose 1/8" (Coarse

Saburr-Tooth carving burr "Power Carving" rotary tools feature long-lasting, razor-sharp carbide cutting teeth arranged into a unique open pattern to resist "loading" while providing the "Power Carver" rapid stock removal and smoother finishes Industries Ideal for use on Wood, Rubber, Silicone, Plastic, Foam, Bone, Ice, Polyurethane, Epoxies, Acrylics, Composites, Graphite, Soap Stone, and Alabaster.

  • Color: Green
  • Brand: Saburr Tooth
  • ASIN: B074MF9Y7S
  • UPC: 611355899357

Weiler 26094-9/16" Cup Brush with 1/4" Long x Straight Hair Bristles, 1/8" Shank, up to 37,000 RPM, Pack of 15

Weiler 26094-9/16" Cup Brush with 1/4" Long x

Specification: diameter: 9/16 intrim length: 1/4 inshank diameter: 1/8 inmount type: Shankbristle material: Hairmaximum rpm: 37000 RPMbristle type: Straightspecification: ANSI B165.1

  • ASIN: B07DHGVZ1D

Atoplee 4pcs 1/4inch Shank Long Grain Solid Carbide Burr with Ball End, Double Cut

Atoplee 4pcs 1/4inch Shank Long Grain Solid Carbide

Features: Can Process a variety of metal and non-metal, processing hardness would up to HRC70. Can replace the petiole small wheel, and no dust pollution. High product processing quality, high finish, can process out a various of high-precision mold cavity. Long life, the durability is 10 times higher than high-speed steel cutting tool, 200 times higher than small grinding wheel. Easy to use, safe and reliable, can reduce labor intensity, improve the working environment. Suitable for processing these metal and non-metal, such as cast iron, cast steel, bearing steel, high carbon steel, chrome-nickel alloy, bronze, brass, and ceramic tile, marble, jade, bone, etc. Uses: Finishing all kinds of metal molds. Cleaning trimming,veining and weld joint of casting, forging and weldment. Carving all kinds of metal and non- metal. A variety of mechanical parts chamfer, round and groove processing. Inner hole surface of machinery parts finishing.

  • Color: silver
  • Brand: ATOPLEE
  • ASIN: B06XXC2WTJ
  • UPC: 714424376039

Anytime Tools 5/32" Diamond Chainsaw Sharpener Burr 1/8" Shank, 4 Pack

Anytime Tools 5/32" Diamond Chainsaw Sharpener Burr 1/8"

Premium Quality Sharpener Burrs Our chainsaw diamond sharpener burrs will sharpen faster and last longer than any traditional steel sharpener. Features: Quantity: 4 Burrs Total length: 1-3/4" Shank Diameter: 1/8" Burr diameter: 5/32" Grit: 120-150

  • Brand: Anytime Tools
  • ASIN: B000P8VTNY
  • UPC: 810823011608

10 Degree 3.175mm Shank Cemented Carbide Engraving Bits CNC PCB Router Carving Tools Pack of 10(0.1mm)

10 Degree 3.175mm Shank Cemented Carbide Engraving Bits

Specifications: Material: Cemented carbide Shank Diameter: 3.175mm / 0.125" Angle: 10 degrees Tip: 0.1mm / 0.004" Quantity: 10 Weight: 32g(approx.)   Package: 10 x Engraving Routers   Note: Due to different batches, the color of rubber cover may differ from the picture.

  • Color: popular
  • Brand: Walfront
  • ASIN: B074MPM7Q1
  • UPC: 736691416348

GRR-RIPPER 3D Pushblock for Table Saws, Router Tables, Band Saws, and Jointers by MICROJIG

GRR-RIPPER 3D Pushblock for Table Saws, Router Tables,

Grr-ripper 3D push Block a must-have for any table saw user.essential protectionit's essential for superior precision, control and safety on your table saw and other major woodworking machinery. Protect your hands like never before, virtually eliminate kickback with unmatched control, and guide and rip With surgical precision. extreme controlthe powerful green grr-rip gives you a commanding hold over the work piece for total control.grr-ripper has three legs to give you three-directions of control on the keeper and off-cut work piece. It provides downward pressure to virtually eliminate kickback, inward pressure to keep the stock against the fence, and forward pressure to prevent burning.unmatched precisionstabilize your cut with the built-in balance Support to square your cut and safely handle the smallest parts of wood When cutting on the table saw or router Table. Rip as accurate as a 1/4" Standard without readjusting the fence. fully adjustablethe adjustable center Leg accommodates for a variety of different sizes and widths of material while the grip secures a virtually unlimited variety of woods, solid surfaces, aluminum or even plastic. Grr-ripper handle can be angled and adjusted for your comfort and control.total versatilitygrr-ripper videos feature over 30 unique uses o...

  • Color: Yellow
  • Brand: MICRO JIG
  • ASIN: B001I9UNWC
  • UPC: 733353322429

MICRO-PRO by Mastercarver 46,000 rpm Detail Carver for piercing & carving

MICRO-PRO by Mastercarver 46,000 rpm Detail Carver for

MASTERCARVER® MICRO-PROTM CHAMPION SET. Create pro quality detail! Higher carving speeds give superior carving results, smoother texturing, plus improved detailing, stoning & feathering. The new Micro-Pro Champion features an 11% increase in torque (power). With higher torque & speed up to 46,000 rpm, the Micro-ProTM has the power, speed, superior features & quality you want, priced far less than others! For better control, power flows to the handpiece by a 6' flexible cord. The dial varies speed from 0 to 46,000 rpm! Control box features: dial speed control knob, lighted power indicator, on / off switch, overload protection, 6-burr storage holes, 110/220 Volt selector switch, forward / reverse switch (directs chips away from you & reduces grain effects). Handpiece features high torque, fan cooled micro motor, sealed NSK ball bearings, solid grip turn-ring for hands-free bit changes (1/4 turn releases or locks bits & collets). Handpiece specifications 46,000 rpm: L. 6", diameter 5/8"-1", weight: 7.3 oz. Set includes: handpiece, 1/8" (3.18mm) and 3/32″ (2.3mm) quick change collets, variable speed power supply, table top and box mounted handpiece holders, long-life motor brushes, instructions & 1-year warranty. Note: burrs not included; for illustration only

  • Brand: Mastercarver
  • ASIN: B01LY2CVUG

Master Lock Padlock, Set Your Own Combination TSA Accepted Luggage Lock, 1-5/16 in. Wide, 4696T (Pack of 2)

Master Lock Padlock, Set Your Own Combination TSA

The Master Lock 4696T set your own combination tsa-accepted luggage lock features a 1-5/16in (35Mm) wide metal body for durability. The 1/4in (6Mm) diameter shackle is 1-7/8in (48Mm) long, offers Extended reach for use on equipment cases and is made of steel, offering resistance to cutting and sawing. Transportation security administration (tsa) screeners can open, inspect and relock bags and cases locked with a tsa-accepted lock. Lock your checked baggage with the lock tsa screeners won't cut! the limited lifetime warranty provides peace of mind from a brand you can trust.

  • Brand: Master Lock
  • ASIN: B01BH5CVJO
  • UPC: 071649274671
Similar 0.125 Long Shank Shopping Results