GF Piping Systems PVC True Union Ball Valve with Full Port, Two Piece, PTFE Seat, EPDM Seal, 1" Socket/NPT Threaded

GF Piping Systems PVC True Union Ball Valve

The GF Piping Systems type 375 two-piece ball valve has a PVC (polyvinyl chloride) body that weighs less than valves made from metals, and it has EPDM (ethylene propylene diene monomer) O-rings for good resistance to weathering, ozone, UV, electricity, oils, water, steam, and some solvents. The PTFE (polytetrafluoroethylene) seat resists chemicals, moisture, and high temperatures. This valve connects two pipes going in the same direction and has true union connections that allow in-place valve replacement. It has a full port for reduced friction; the inner diameter of the valve is the same as the inner diameter of the pipes it connects to enable maximum operating efficiency. This valve includes socket weld connections with an internal recess on each inside diameter to allow for a smooth bore and better fluid flow. Valves in sizes 3/8" through 2" also include National Pipe Taper (NPT) threaded connections, which create tighter seals than straight threads. It is pressure rated to 232 pounds per square inch (psi) at 72 degrees Fahrenheit (F) using the socket connections and is pressure rated to 150 psi at 72 degrees F using the NPT threaded connections. The ergonomic manually operated handle for turning the valve on and off has an integrated tool for adjusting the union bushing. Thi...

  • Brand: GF Piping Systems
  • ASIN: B008O1ZWMS

NIBCO T-FP-600A BRS Brass Ball Valve, Two-Piece, Lever Handle, 1" Female NPT Thread (FIPT)

NIBCO T-FP-600A BRS Brass Ball Valve, Two-Piece, Lever

This NIBCO NL998HA BRS ball valve is made of chrome-plated brass for higher corrosion resistance than regular brass or steel, and has a lever handle for on/off manual control, and full port flow for higher operating efficiency than standard port. This two-piece inline valve has 1" female National Pipe Taper (NPT) threads for connecting two male threaded pipes going in the same direction, and PTFE (polytetrafluoroethylene) seats for resistance to chemicals, moisture, and high temperatures. It is pressure rated to 600 pounds per square inch (psi) for cold working pressure (CWP) and has a blow-out proof stem to reduce leakage and valve damage. This full port ball valve meets NSF International/American National Standards Institute (NSF/ANSI) 61.8 standards for potable water use and is suitable for use in residential and light commercial applications.Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve and is blocked when the ball is horizontally swiveled 90 degrees, so that the hole of the ball is perpendicular to the opening of the valve. Ball valves can be referred to as full port or reduced port (also known as regular or standard port) d...

  • Brand: NIBCO
  • ASIN: B004M469WS
  • UPC: 039923276629

Apollo 70-600 Series Bronze Ball Valve, Two Piece, 3-Port Diverting, Lever, 1" NPT Female

Apollo 70-600 Series Bronze Ball Valve, Two Piece,

The Apollo 70-600 series two-piece three-port diverting ball valve is made of bronze and has a lever handle and female National Pipe Taper (NPT) threaded connections on both ends. This valve is made of bronze for higher strength and corrosion resistance than brass and has a zinc-plated steel lever handle with a vinyl sleeve for manual control. This ball valve is three-port diverting to regulate flow among three sections of pipe. Its maximum pressure is 400 pounds per square inch (gauge) (psig) for use with water, oil, and gas (WOG). It has NPT threads on both ends for creating tighter seals than straight threads. Reinforced polytetrafluoroethylene (RPTFE) seats and a PTFE seal reduce the risk of valve leakage. This ball valve is standard (or regular) port for reduced valve size and cost and has a working temperature range of -20 to 450 degrees Fahrenheit. This valve is for use in water lines, processing plants, and agricultural applications and meets standard MSS SP-110 for quality assurance. Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve. Flow is blocked when the ball is horizontally swiveled 90 degrees, so that the hole of the ...

  • Brand: Apollo Valve
  • ASIN: B0062RY8T4
  • UPC: 670750673788

Apollo 32-100 Series Bronze Ball Valve, Two Piece, Inline, Lever, 1" NPT Female

Apollo 32-100 Series Bronze Ball Valve, Two Piece,

The Apollo 32-100 series two-piece inline ball valve is made of bronze and has a lever handle and female National Pipe Taper (NPT) threaded connections on both ends. This valve is made of bronze for higher strength and corrosion resistance than brass. It has a zinc-plated steel lever handle with a vinyl sleeve for manual on/off control. This ball valve is standard (or regular) port for reduced valve size and cost. The maximum pressure is 400 pounds per square inch (psi) for cold working pressure (CWP) and 125 psi for steam working pressure (SWP), and the maximum temperature is 400 degrees Fahrenheit. The valve is inline for connecting two pipes going in the same direction and has NPT threads on both ends for creating tighter seals than straight threads. Polytetrafluoroethylene (PTFE) seats and reinforced polytetraflouroethylene (RPTFE) stem packing reduce the risk of valve leakage. This valve is for use in water lines, processing plants, and agricultural applications and meets standards MSS SP-110 and CRN: OC10908.5 for quality assurance. Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve. Flow is blocked when the ball is horizontall...

  • Brand: Apollo Valve
  • ASIN: B0062RXYYE
  • UPC: 670750560736

Apollo 75-100 Series Bronze Ball Valve, Two Piece, Inline, Lockable Lever, 1" NPT Female

Apollo 75-100 Series Bronze Ball Valve, Two Piece,

The Apollo 75-100 series two-piece inline ball valve is made of bronze and has a lockable lever-handle and female National Pipe Taper (NPT) threaded connections on both ends. This valve is made of bronze for higher strength and corrosion resistance than brass. This valve has a zinc-plated steel, lockable lever handle that can be locked in the open or closed position using a portable lock (not included). The maximum pressure is 600 pounds per square inch (gauge) (psig) for use with water, oil, and gas (WOG) and 150 for saturated steam. The valve is inline for connecting two pipes going in the same direction and has NPT threads on both ends for creating tighter seals than straight threads. Reinforced polytetrafluoroethylene (RPTFE) seats and a PTFE seal reduce the risk of valve leakage. This ball valve is standard (or regular) port for reduced valve size and cost and has a working temperature range of -20 to 450 degrees Fahrenheit. This valve is for use in water lines, processing plants, and agricultural applications and meets standard MSS SP-110 for quality assurance. Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve. Flow is blocked...

  • Brand: Apollo Valve
  • ASIN: B0062RYRFO
  • UPC: 670750691416

Duda Energy 2PCBV-WOG200-F100 Full Port Ball Valve, 1" NPT, 2 Piece, 304 Stainless Steel with Blue Vinyl Handle, 1"

Duda Energy 2PCBV-WOG200-F100 Full Port Ball Valve, 1"

2-Piece Stainless Steel Ball Valves with PTFE Seals & Seats by Duda Energy Duda Energy's Stainless Steel Ball Valves with PTFE (Teflon) Seats & Seals offer excellent corrosion resistance for most applications. Stainless Steel & PTFE work well in applications including but not limited to water, oil, gas/air, light alkali's and acids, biodiesel, fuels and alcohols. These ball valves are fitted with tight seals to ensure no leakage and a long lasting seal after many years of frequent usage. All metal pieces of our valves are 304 stainless steel, including the nuts and other exterior metals. Other manufacturers cut costs by using 201 stainless steel on these parts which results in a rusty looking valve over time. Duda Energy manufacturers its 2-Piece Ball Valves with all 304 stainless steel parts so you can be sure there won't be any rust formation from external air or water exposure over time. Available in both WOG200 and WOG1000. WOG200 are considered ideal for most general applications. WOG1000 are for high pressure and industrial applications where of the valve are preferred.

  • Brand: Duda Energy
  • ASIN: B00E4B3GVQ
  • UPC: 840194100090

304 Stainless Steel Full Port Two-Piece Ball Valve, 1/2" NPT Female 2 Way Rotary Lever WOG1000

304 Stainless Steel Full Port Two-Piece Ball Valve,

Description: Two-piece ball valve and the flange gate valve is the same type of valve, the ball around the centerline of the valve for rotation to open, close a valve. Ball valve in the pipeline is mainly used to do cutting, distribution and change the direction of flow of media. Two-piece ball valve, is widely used in recent years, a new type of valve.   Specifications:  Material:  stainless steel 304 Dimension: 1/2'' Connection: inch thread Gross weight: 202g Temp Range:-60°F to 450°F Package Includes:  1X 1/2'' NPT Two Pieces Ball Valve   Note:  1.Please allow 1-2mm differs due to manual measurement, thanks. 2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Please understand, Thank you!    

  • Color: popular
  • Brand: Walfront
  • ASIN: B073ZGGHZ3
  • UPC: 736691343361

Kegco 6 Gallon Brew Kettle with Plug & 2-Piece Ball Valve

Kegco 6 Gallon Brew Kettle with Plug &

Kegco Brew Kettles have been specially designed for brewing applications and are durably built to keep you brewing for a lifetime. This 6 gallon brew pot is the perfect stove-top brew kettle for 1 - 5 gallon batches or 5 gallon concentrated wort boils. Kegco brewing pots are constructed of heavy duty, food grade, 22 gauge, 304 grade stainless steel with a tri-clad bottom that ensures even heat distribution. The boil pot comes equipped with a lid that was designed to hang conveniently on the kettle's handles. The silicone handles are riveted in place to assist when lifting a hot liquid-filled pot. Kegco brew kettles feature standard 7/8" accessory holes and weldless bulkheads for easy cleaning and customization, and this brew kettle comes complete with a 1/2" Hex Head Plug in the upper bulkhead and a 2-Piece Ball Valve in the lower bulkhead. Perfect for brewing small batches or being used as a small hot liquor tank, every detail of this Kegco stock pot has been thought through to enhance the home-brewing experience.

  • Color: Plug & 2-Piece Ball Valve
  • Brand: Kegco
  • ASIN: B01MRM9RHD
  • UPC: 700697203080

Apollo 76F-100-A Series Stainless Steel Ball Valve, Two Piece, Inline, Lever, 1" NPT Female

Apollo 76F-100-A Series Stainless Steel Ball Valve, Two

The Apollo 76F-100-A series two-piece full port inline ball valve is made of stainless steel and has a lever handle and female National Pipe Taper (NPT) threaded connections on both ends. This valve is made of stainless steel for resistance to corrosion and has a stainless steel lever handle with vinyl sleeve for manual on/off control. The ball valve is full port for reduced friction; its inner diameter is the same as the inner diameter of the pipe it connects to enable maximum operating efficiency. The maximum pressure is 1,000 pounds per square inch (gauge) (psig) for cold working pressure (CWP) and 150 psig for saturated steam, and the temperature range is -20 to 450 degrees Fahrenheit. The valve is inline for connecting two pipes going in the same direction and has NPT threads on both ends for creating tighter seals than straight threads. Reinforced polytetrafluoroethylene (RPTFE) seats and seals reduce the risk of valve leakage. This valve is for use with water lines, processing plants, and agricultural applications and meets standard MSS SP-110 for quality assurance. Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve. Flow is b...

  • Brand: Apollo Valve
  • ASIN: B0062Q96VA
  • UPC: 670750614705

Apollo 70-100 Series Bronze Ball Valve, Two Piece, Inline, Lever with Nut, 1" NPT Female

Apollo 70-100 Series Bronze Ball Valve, Two Piece,

The Apollo 70-100 series two-piece inline ball valve is made of bronze and has a lever-handle with a nut and female National Pipe Taper (NPT) threaded connections on both ends. This valve is made of bronze for higher strength and corrosion resistance than brass. It has a zinc-plated steel lever handle with a vinyl sleeve and nut for manual on/off control. The maximum pressure is 600 pounds per square inch (gauge) (psig) for use with water, oil, and gas (WOG) and 150 for saturated steam. The valve is inline for connecting two pipes going in the same direction and has NPT threads on both ends for creating tighter seals than straight threads. Reinforced polytetrafluoroethylene (RPTFE) seats and multifill polytetrafluoroethylene (MPTFE) stem packing reduce the risk of valve leakage. This ball valve is standard (or regular) port for reduced valve size and cost and has a working temperature range of -20 to 450 degrees Fahrenheit. This valve is for use in water lines, processing plants, and agricultural applications and meets standard MSS SP-110 for quality assurance. Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve. Flow is blocked when ...

  • Brand: Apollo Valve
  • ASIN: B0062S19JU
  • UPC: 670750653438

Merit Brass Stainless Steel 316 Ball Valve, Two Piece, Full Port, Lever, 1" NPT Female

Merit Brass Stainless Steel 316 Ball Valve, Two

The Merit Brass two-piece full port ball valve is made of stainless steel 316 and has a lever handle and female National Pipe Taper (NPT) threaded connections on both ends. This stainless steel 316 valve, which is higher strength and more corrosion resistant than stainless steel 304, has a lever handle with a vinyl sleeve for manual on/off control. This ball valve is full port for reduced friction; its inner diameter is the same as the inner diameter of the pipe it connects to enable maximum operating efficiency. The maximum pressure is 1,000 pounds per square inch (gauge) (psig) for use with water, oil, and gas (WOG) and the working temperature range is 0 - 400 degrees Fahrenheit. The valve is inline for connecting two pipes going in the same direction and has NPT threads on both ends for creating tighter seals than straight threads. Polytetrafluoroethylene (PTFE) reinforced seats and seals reduce the risk of valve leakage. This valve is for use with water lines, processing plants, and agricultural applications. Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve. Flow is blocked when the ball is horizontally swiveled 90 degrees, so ...

  • Brand: Merit Brass
  • ASIN: B0054KZVJG

NIBCO T-585-70 Cast Bronze Ball Valve, Two-Piece, Lever Handle, 1" Female NPT Thread (FIPT)

NIBCO T-585-70 Cast Bronze Ball Valve, Two-Piece, Lever

Full port, threaded end ball valve. Recommended for hot and cold water, condenser and chilled water, hot water heating compressed air and many more commercial applications.

  • Brand: NIBCO
  • ASIN: B001VY1GMU
  • UPC: 039923677631

Apollo 70LF-200 Series Bronze Ball Valve, Potable Water Service, Two Piece, Inline, Lever, 1" Solder End

Apollo 70LF-200 Series Bronze Ball Valve, Potable Water

The Apollo 70LF-200 series bronze two-piece inline ball valve has a lever handle and solder end connections for semi-permanent yet reversible connections to tubing. This valve is made of bronze for higher strength and corrosion resistance than brass, and has a zinc-plated steel lever handle with a vinyl sleeve for manual on/off control. The valve materials meet federal and state lead level requirements for use with potable water systems, and the maximum pressure ratings are 600 pounds per square inch (gauge) (psig) cold working pressure (CWP) and 150 psig steam working pressure (SWP). The reinforced polytetrafluoroethylene (RPTFE) seats and stem packing reduce the risk of leakage. This valve is standard (or regular) port for reduced valve size and cost, and has a temperature range of -20 to 450 degrees Fahrenheit. This ball valve is for use in water lines, processing plants, and agricultural applications and meets standards CA AB1953, VT Act 193, MD HB372, LA HB471, Federal Public Law 111-380, ANSI/NSF 61, and MSS SP-110 for quality assurance. Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve. Flow is blocked when the ball is horizo...

  • Brand: Apollo Valve
  • ASIN: B0051SUVG4
  • UPC: 670750441783

Apollo 70-800 Series Bronze Ball Valve, Two Piece, Inline, Lever, 1" NPT Male x NPT Female

Apollo 70-800 Series Bronze Ball Valve, Two Piece,

The Apollo 70-800 series bronze two-piece inline ball valve has a lever handle and National Pipe Taper (NPT) male threads on one end and NPT female threads on the other. The valve body is made of bronze for higher strength and corrosion resistance than brass. This valve has a zinc-plated steel lever handle with a vinyl sleeve for manual on/off control. Reinforced polytetrafluoroethylene (RPTFE) seats and stem packing reduce the risk of leakage. The valve is standard (or regular) port for reduced valve size and cost. The NPT threads create a tighter seal than straight threads. The maximum pressure rating is 600 pounds per square inch (gauge) (psig) for cold working pressure (CWP), 150 psig for saturated steam, and the maximum vacuum pressure is 29 in Hg. The maximum working temperature is 425 degrees Fahrenheit. This valve meets Manufacturers Standardization Society (MSS) SP-110 and WW-V-35C standards for quality assurance. Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve. Flow is blocked when the ball is horizontally swiveled 90 degrees, so that the hole of the ball is perpendicular to the opening of the valve. Ball valves can be re...

  • Brand: Apollo Valve
  • ASIN: B001C22FDU
  • UPC: 670750675690

Apollo 71-100 Series Bronze Ball Valve with Mounting Pad, Two Piece, Inline, Lever, 1" NPT Female

Apollo 71-100 Series Bronze Ball Valve with Mounting

The Apollo 71-100 series bronze two-piece inline ball valve has a lever handle, an actuator mounting pad for automating valve operation, and female National Pipe Taper (NPT) threaded connections on both ends. It is made of bronze for higher strength and corrosion resistance than brass, and has a zinc-plated steel lever handle with a vinyl sleeve for manual on/off control. This valve has a mounting pad for attaching a quarter-turn electric or pneumatic actuator to provide automated operation. It has reinforced polytetrafluoroethylene (RPTFE) seats and multifill polytetrafluoroethylene (MPTFE) stem packing to reduce the possibility of leakage, and National Pipe Taper (NPT) threads for creating tighter seals than straight threads. This valve is standard (or regular) port for reduced size and cost. The maximum pressure is 600 pounds per square inch (gauge) (psig) for use with water, oil, and gas (WOG) and 150 psig for saturated steam, and the temperature range is -20 to 450 degrees Fahrenheit. This ball valve is for use in water lines, processing plants, and agricultural applications and meets standard MSS SP-110 for quality assurance. Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc ...

  • Brand: Apollo Valve
  • ASIN: B006G029MA
  • UPC: 670750677274

Apollo 70-100 Series Bronze Ball Valve, Two Piece, Inline, Lever, 1" NPT Female

Apollo 70-100 Series Bronze Ball Valve, Two Piece,

The Apollo 70-100 series two-piece inline ball valve is made of bronze and has a lever handle and female National Pipe Taper (NPT) threaded connections on both ends. This valve is made of bronze for higher strength and corrosion resistance than brass and has a zinc-plated steel lever handle with a vinyl sleeve for manual on/off control. The maximum pressure is 600 pounds per square inch (gauge) (psig) for use with water, oil, and gas (WOG) and 150 for saturated steam. The valve is inline for connecting two pipes going in the same direction and has NPT threads on both ends for creating tighter seals than straight threads. Polytetrafluoroethylene (PTFE) reinforced seats and seals reduce the risk of valve leakage. This ball valve is standard (or reduced or regular) port for reduced valve size and cost and has a working temperature range of 0 - 500 degrees Fahrenheit. This valve is for use in water lines, processing plants, and agricultural applications and meets standard MSS SP-110 for quality assurance. Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve. Flow is blocked when the ball is horizontally swiveled 90 degrees, so that the hol...

  • Brand: Apollo Valve
  • ASIN: B000KKS9JY
  • UPC: 670750653315

Apollo 75-100 Series Bronze Ball Valve with Automatic Drain, Two Piece, Inline, Lockable Lever, 1" NPT Female

Apollo 75-100 Series Bronze Ball Valve with Automatic

The Apollo 75-100 series two-piece inline ball valve with automatic drain is made of bronze and has a lockable lever handle and female National Pipe Taper (NPT) threaded connections on both ends. This valve is made of bronze for higher strength and corrosion resistance than brass. This valve is primarily for use in pneumatic applications; it has an automatic drain for releasing air pressure from the pneumatic system to which it is connected. When the valve is in the "on" position, the drain vent is closed; when the valve is in the "off" position, air from the downstream system is vented to the atmosphere. This valve has a zinc-plated steel, lockable lever handle that can be locked in either the open or closed position using a portable lock (not included). The pounds per square inch (gauge) (psig) rating for this valve is 600 for water, oil, and gas (WOG) and 150 for saturated steam. It is inline for connecting two pipes going in the same direction and has NPT threads on both ends for creating tighter seals than straight threads. Reinforced polytetrafluoroethylene (RPTFE) seats and multifill polytetrafluoroethylene (MPTFE) stem packing reduce the risk of valve leakage. This ball valve is standard (or regular) port for reduced valve size and cost and has a working temperature rang...

  • Brand: Apollo Valve
  • ASIN: B0062S2APM
  • UPC: 670750691485

Apollo 70-140 Series Bronze Ball Valve with Stainless Steel 316 Ball and Stem, Two Piece, Inline, 250# Steam Trim, 1" NPT Female

Apollo 70-140 Series Bronze Ball Valve with Stainless

The Apollo 70-140 series two-piece inline ball valve with stainless steel 316 ball and stem and 250# (psi) steam trim is made of bronze and has a lever-handle and female National Pipe Taper (NPT) threaded connections on both ends. This valve’s maximum pressure is 250 pounds per square inch (gauge) (psig) for saturated steam and 600 for use with water, oil, and gas (WOG). For resistance to corrosion, this valve is made of bronze and its ball and stem are made of stainless steel 316. It has a zinc-plated steel lever handle with a vinyl sleeve for manual on/off control. The valve is inline for connecting two pipes going in the same direction and has NPT threads on both ends for creating tighter seals than straight threads. Reinforced polytetrafluoroethylene (RPTFE) seats and multifill polytetrafluoroethylene (MPTFE) stem packing reduce the risk of valve leakage. This ball valve is standard (or regular) port for reduced valve size and cost and has a working temperature range of -20 to 450 degrees Fahrenheit. This valve is for use in water lines, processing plants, and agricultural applications and meets standard MSS SP-110 for quality assurance. Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-...

  • Brand: Apollo Valve
  • ASIN: B0062S1M38
  • UPC: 670750661211

Apollo 94A Series Brass Ball Valve, Two Piece, Inline, Lever, 1" NPT Female

Apollo 94A Series Brass Ball Valve, Two Piece,

The Apollo 94A series two-piece full port inline ball valve is made of brass and has a lever handle and female National Pipe Taper (NPT) threaded connections on both ends. This valve is made of brass for higher corrosion resistance than steel and has a steel lever handle with corrosion resistant plating and a vinyl sleeve for manual on/off control. The ball valve is full port for reduced friction; its inner diameter is the same as the inner diameter of the pipe it connects to enable maximum operating efficiency. The maximum pressure is 600 pounds per square inch (psi) for cold working pressure (CWP) for 1/4” to 2” valves and 400 psi CWP for 2-1/2” to 4” valves. The maximum temperature is 400 degrees Fahrenheit. The valve is inline for connecting two pipes going in the same direction and has NPT threads on both ends for creating tighter seals than straight threads. Polytetrafluoroethylene (PTFE) seats and stem packing reduce the risk of valve leakage. This valve is for use with water lines, processing plants, and agricultural applications and meets standard ANSI/NSF 61 for quality assurance. Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outl...

  • Brand: Apollo Valve
  • ASIN: B000R80OGA
  • UPC: 670750823367

Apollo 70-300 Series Bronze Ball Valve, Two Piece, Inline, Lever, 1" NPT Female x Union NPT Female

Apollo 70-300 Series Bronze Ball Valve, Two Piece,

The Apollo 70-300 series bronze two-piece inline ball valve has a lever handle and National Pipe Taper (NPT) female threads on one end and union NPT female end on the other. The valve body is made of bronze for higher strength and corrosion resistance than brass. This valve has a zinc-plated steel lever handle with a vinyl sleeve for manual on/off control. Reinforced polytetrafluoroethylene (RPTFE) seats and stem packing reduce the risk of leakage. The valve is standard (or regular) port for reduced valve size and cost. Female NPT threads connect this valve to male threaded pipes, creating a tighter seal than straight threads. Union end allows simple connection and disconnection. The maximum pressure rating is 600 pounds per square inch (gauge) (psig) for cold working pressure (CWP), 150 psig for saturated steam, and the maximum vacuum pressure is 29 in Hg. The maximum working temperature is 500 degrees Fahrenheit. This valve meets Manufacturers Standardization Society (MSS) SP-110 and WW-V-35C standards for quality assurance. Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve. Flow is blocked when the ball is horizontally swiveled 90...

  • Brand: Apollo Valve
  • ASIN: B000R8F0SW
  • UPC: 670750669859
Similar 1 Two Piece Ball Valve Shopping Results