SMAKN® AC/DC TO DC Converter AC 16-28V/DC 16-40V Step Down to 12V/5A Power Supply Module

SMAKN® AC/DC TO DC Converter AC 16-28V/DC 16-40V

(Output Current):5A Max (Total Power):60 Watt (Output Noise):=96% Environment Operation temperature) :-40-85(Culsius degree) (MTBF):>20000 (Hour) (Protection function): (Short circuit protect); (Over current protect); (Over load protect) SIZE:L58*W40*H22MM HEIGHT:100G (Common Application): (CCD Camera); (CCTV System); Gateway);...ect

  • Brand: SMAKN
  • ASIN: B00R5GO4YU
  • UPC: 709127307688

DZS Elec 12V 2 Channel High/Low Level Trigger with Optical Isolation Relay Module Fault Tolerant Design Load AC 0-250V/10A DC 0-30V/10A Circuit Switch Board

DZS Elec 12V 2 Channel High/Low Level Trigger

Feature: Module Size: 50*41*18.5mm With 4 fixed bolt holes, diameter 3.1mm, spacing 44.5*35.5mm High and low level trigger selection: Trigger current is 2-4mA, trigger low level is 0-4V, trigger high level is 4.5-12V 1. S1 1 way relay high or low level trigger selection; 2. S2 2 way relay high or low level trigger selection; 3. com and low in short circuit, the relay is low level trigger, com and high end in short circuit, the relay is high level trigger. Input Interface: 1. DC+: to connect the power positive (voltage as the relay required 12V) 2. DC-: to connect the power negative 3. IN1: 1 way signal trigger end, can set the high or low level control relay 4. IN2: 2 way signal trigger end, can set the high or low level control relay Output Interface: 1. NO1: 1 way relay normally open interface, suspend the relay before pulling, then short connect with COM1 2. COM1:1 way relay common interface 3. NC1: 1 way relay normally close interface, short connect the relay with COM1 before pulling, then suspend 4. NO2: 2 way relay normally open relay interface, suspend the relay before pulling, then short connect with COM2 5. COM2: 2 way relay common interface 6. NC2: 2 way relay normally close interface, short connect the relay with COM2 before pulling, then suspend Package Inlcude: 1...

  • Brand: DZS Elec
  • ASIN: B0721M34CM
  • UPC: 746860363472

NOYITO AC to DC Precision Buck Power Supply Module AC 110V 100V-264V to 12V 2A 2000mA Isolated Step Down DC Module (12V 2A)

NOYITO AC to DC Precision Buck Power Supply

Description Isolated Precision Buck Power Supply Module ,Wide voltage range input with overload, short circuit, over temperature protection. Ultra-small size and high efficiency. Output parameters: Output voltage: 12V ±1%. Output current: 2A 2000mA. Ripple: less than 60mVp-p. Output accuracy: ±1%. Voltage regulation rate: ±1%. Load adjustment rate: ±1% Rated power: 24W. Output adjustable range: not adjustable. Establish, rise, hold time: 500ms, 80ms, 80ms / 220V AC. Input parameters: Input voltage range: AC 100- 264V. Input current: less than 0.2A. (Average current 0.03A-0.1A). Frequency range: 47-63Hz. Efficiency: about 80%. Start surge current: COLD START 30A/230V / AC. Leakage current: less than 2mA / 220V AC. Protection features: Over power protection: 150-170% rated power. (Fault removal is automatically restored). Overvoltage protection: VH: >50%. DC short circuit protection: The power supply is intermittently separated. (Fault removal is automatically restored). Environmental parameters: Working temperature: -15 ° C - +50 ° C @ 100% LOAD , +60 ° C @ 60% LOAD; Working humidity: 20%-90% RH. Storage temperature, humidity: -20 ° C - +85 ° C, 10% -95% RH. Safety and EMC standards: Withstand voltage: I/P-O/P: 1KV AC 1min. Insulation resistance: I/P-O/P: 500VDC / ...

  • Color: Green
  • Brand: NOYITO
  • ASIN: B07FNFJTHH
  • UPC: 667797751791

NOYITO AC-DC 12V 8A Power Supply Module AC 110V (85-265V) to 12V 100W Max Power Module with Overcurrent Overload Short-Circuit Protection Suitable for Civil or Industrial Control Systems(12V 8A)

NOYITO AC-DC 12V 8A Power Supply Module AC

Description: The power module adopts double-sided PCB design, and the performance is more stable and more reliable. It is suitable for power supply of civil or industrial control systems. Parameter: Input voltage: AC 85 - 265V 50/60HZ (wide voltage input, suitable for various use environments). Output voltage: DC12V±0.5V. Output current: 6-8A. Output power: 100W Max. Ripple noise: ≤200MV. Product size: 10.65x5.7x2.95cm (LxWxH). Positioning hole size: 9.8X4.7cm. Weight: 145g. Compact and with indicator light. Package Included: 1pcs AC-DC 12V 8A Power Supply Module

  • Color: Blue
  • Brand: NOYITO
  • ASIN: B07C1XGX7M
  • UPC: 667797748913

Panghuhu88 Mini AC-DC Converter AC110V 220V to DC 12V 0.2A+5V Module Board

Panghuhu88 Mini AC-DC Converter AC110V 220V to DC

Features:100% Brand New and High QualityInput voltage: AC 110-220VOutput voltage: DC 5V 12VOutput current: 100mA/500mAOutput power: 0.5W/6WSize: 35*25*15mmPackage Included:1 x DC-DC Power Module

  • Brand: Panghuhu88
  • ASIN: B07T87YPKV

Buck Converter, Yeeco AC/DC to DC Step Down Converter AC 2.5-27V DC 3-40V 24V 36V to DC 1.5-27V 12V Voltage Regulator Board 3A Adjustable Volt Transformer Power Supply Module

Buck Converter, Yeeco AC/DC to DC Step Down

Name: F2596AC / DC Input voltage: AC 2.5-27V / DC 3-40V Output voltage: DC1.5-27V adjustable Output Current: 3A MAX Switching Frequency: 150KHz Operating temperature -40 ℃ to + 85 ℃ Full load temperature rise: 40 ℃ Load regulation: ± 0.5% Voltage regulation: ± 0.5% Note: 1.Long time work below 2A when voltage

  • Brand: Yeeco
  • ASIN: B00SO4T7IU
  • UPC: 710882794538

Cp-Tree 2pcs 2 Channel 12V High/Low Level Trigger Relay Module with Optical Isolation Load AC 0-250V/10A DC 0-30V/10A Circuit Switch Board PCB Fault Tolerant Design (12V High/Low Level Trigger)

Cp-Tree 2pcs 2 Channel 12V High/Low Level Trigger

5V Relay Module 4-Channel interface board. It can be able to control various appliances, and other equipments with large current the industrial field, PLC control, Smart home control, supports all MCU control (Raspberry Pi, Android, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic) Equipped with high-current relay, AC250V 10A ; DC30V 10A Feature: Module Size: 73*50*18.5mm With 4 fixed bolt holes, diameter 3.1mm, spacing 44.5*67mm Indication LED's for Relay output status Input Interface: 1. VCC, DC+, to connect the power positive (5V) 2. GND, DC-, to connect the power negative 3. IN1-IN4, Control interface, low level trigger Output Interface: 1. NO1-NO4, relay normally open interface, suspend the relay before pulling, then short connect with COM 2. COM1-COM4, relay common interface 3. NC1-NC4, relay normally close interface, short connect the relay with COM before pulling, then suspend

  • Color: 12V High/Low Level Trigger
  • Brand: Cp-Tree
  • ASIN: B07QBZWVFT

NOYITO AC - DC Power Supply Module DC 12V 8A / 5V 1A Dual Output AC 100-260V to 12V 5V 100W Industrial Power Module (Dual Output 12V 8A / 5V 1A)

NOYITO AC - DC Power Supply Module DC

AC - DC Power Supply Module Product Dimensions Download Link: https://www.amazon.com/clouddrive/share/8kRtvDo06S8CRPO92Lvs2EYWIUAgHIVUbHp4zqcdFH4 Description The power module uses double-sided PCB design, stable performance, and reliable! Suitable for power supply for civil and industrial control systems! Parameter Input voltage: AC 100- 260V 50/60Hz, . (Wide voltage input, suitable for various use conditions). Output: Dual output. DC12V 8A, 5V 500mA (if up to 1A output, need to strengthen the power module cooling). Power: 100W. Ripple noise: ≤200MV With overcurrent protection. With overload protection . With short circuit protection. Positioning hole size: 9.8X4.7 cm Overall size: 10.65X5.7 cm Weight: 150g. Package Included: 1pcs AC - DC Power Supply Module

  • Color: Blue
  • Brand: NOYITO
  • ASIN: B07C2MMKW3
  • UPC: 667797749118

DROK Buck Voltage Converter Power Supply Module DC 0-35V AC 0-28V to DC 1.25-32V LED Voltage Regulator DC 24V to 12V Step Down Volt Transformer

DROK Buck Voltage Converter Power Supply Module DC

LM317 is three-terminal adjustable regulator integrated circuit early made by National Semiconductor and widely used in many integrated circuit manufacturers. Easily use , it just need two external resistance to set output voltage. Besides, its linear adjusting ratio and rejection ratio is better than the standard fixed regulators. Parameter: Input voltage: DC 35V(Max), AC 28V(Max). Output voltage: DC 1.25~32V, can adjust continuously. The max voltage error: DC 40V The min voltage error: DC 3V Output current: recommend 5mA~3A Short-circuit current: 4~4.5A Internal protection: over-heat, over-load, short-circuit External protection: the external adds load protection to protect circuit. Working temperature: -10~+85℃ Save temperature:-65℃~+150℃ Typical linear adjusting ratio: 0.01%   Typical load adjusting ratio: 0.1% Ripple rejection ratio: 80dB Product size: 76*57*33mm Package Includes: 1 x Parallel Type Voltage Regulated Power Panel

  • Brand: DROK
  • ASIN: B06ZZJ9XSQ

12v to 5v Converter USB, DROK Voltage Buck Regulator DC 9-36V to 5V 5A Power Supply Module Volt Step-Down Transformer Board with Dual USB Output Port

12v to 5v Converter USB, DROK Voltage Buck

Parameters: Operating voltage: DC 9-36V Output voltage: 5V Output current: 9V-24V input -- 6A 24V-32V input -- 5A 32V-36V input -- 3.5A Dimension: 53x40x21cm Package Including: 1x 12v to 5v Converter USB

  • Brand: DROK
  • ASIN: B073PQTMRP
Similar 12v Ac Module Shopping Results