HiLetgo CD74HC4067 CMOS 16 Channel 16 CH Digital Analog Multiplexer Breakout Module for Arduino

HiLetgo CD74HC4067 CMOS 16 Channel 16 CH Digital

CD74HC4067 CMOS 16 Channel Digital Analog Multiplexer Breakout Module Arduino Description: This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx). It works with both digital and analog signals (the voltage can't be higher than VCC), and the connections function in either direction. To control it, connect 4 digital outputs to the chip's address select pins (S0-S3), and send it the binary address of the channel you want (see the datasheet for details). This allows you to connect up to 16 sensors to your system using only 5 pins! Since the mux/demux also works with digital signals, you can use it to pipe TTL-level serial data to or from multiple devices. For example, you could use it to connect the TX pins of 16 devices to one RX pin on your microcontroller. You can then select any one of those 16 devices to listen to. If you want two-way communications, you can add a second board to route your microcontroller's TX line to 16 device's RX lines. By using multiple boards, you can create similar arrangements for I2C, SPI, etc. The internal switches are bidirectional, support voltages ...

  • Color: Blue
  • Brand: HiLetgo
  • ASIN: B01DLHKLNE

Video Quad Color 4CH Multiplexer 2 BNC Output with Loop, Remote Control and FREE 1Amp power adapter

Video Quad Color 4CH Multiplexer 2 BNC Output

InstallerCCTV 4CH Video Color Quad Multiplexer with Loopout InstallerCCTV 4CH Video Color Quad Multiplexer is perfect for viewing 4 Traditional Analog Cameras at once. Great for those who only wants to view their camera and do not need to record. In addition, our multiplexer have loop out function Features: 4 Channel Color Quad Multiplexer Loopout Function Multiple Display Modes: 4 pictures, 2 pictures, 1 picture Adjustable Brightness, Saturation, Contrast, Hue And Sharpness Build-In Buzzer Specifications: Monitor Resolution NTSC: 720 x 480, PAL: 720 x 576 Video Input: 1.0Vp-p75 ohm Tape Input/Output: 1.0Vp-p75 ohm Alarm Mode: Video Lost Warning Video Input Mode: Full Screen, Electronic Amplication, PIP and Auto Sequence Working Voltage: DC12v/1A Environmental Temperature: -30°C-60°C Package Includes: 1x 4CH Quad Multiplexer 1x 1Amp Power Adapter 1x Remote Control

  • Brand: InstallerCCTV
  • ASIN: B006GVN1IA
  • UPC: 897503001364

16-Channel BNC Video Multiplexer Picture-In-Picture Video Processor

16-Channel BNC Video Multiplexer Picture-In-Picture Video

Professional 16-Channel Video Multiplexer Picture-In-Picture Video Processor This multi-channel video mixer provides a cost effective solution of combining multiple video inputs together into one split screen view for display or recording.The PIP or split-screen window screen format and position can be controlled by using the supplied IR remote, front panel push buttons or RS232/RS485 connection with a PC for distant PTZ control. 16 screen mode options presented in 16/9/8/4/3-grid, quad screen, PIP, picture-by-picture style or single channel full screen. Featured with total of 16 video inputs + 16 video loop-through + 4 audio inputs with 2 composite BNC/RCA video outputs, 1 VGA simultaneous output at 1024x768 pixels max and 1 audio output. All NTSC and PAL video devices or TV monitors are supported. Alarm support for video loss detection, motion detection, external alarm with buzzer sound. Unit is also 1U rack-mount ready. Real-Time Multi-Channel Screen Modes This split screen video processor can overlay all the selected input channels into different formation for viewing or presentation. All video input channels can be presented in the following 16 matrix screen modes: 16-channel split screen 9-channel split screen 8-chnanel split screen 4-channel split screen 3-channel PIP scr...

  • Brand: AllAboutAdapters
  • ASIN: B073L1M3SC

Ximimark 5Pcs 16CH Analog Digital Multiplexer Breakout Board Module CD74HC4067 CMOS Precise Module For Arduino

Ximimark 5Pcs 16CH Analog Digital Multiplexer Breakout Board

Specifications: 2V to 6V operation "On" resistance: 70 Ohms @ 4.5V 6ns break-before-make @ 4.5V Wide operating temperature range: -55C to 125C Analog signal input: C0-C15/16 channel Analog output: DIG Channel control: S0-S3 Note: Since our company does not provide technical support, the installation of electronic modules requires basic knowledge and requires a certain electronic professional foundation and hands-on ability. Please purchase carefully! Manual measurement, with small error. Please check size in detail before purchase. Real colors may slightly differ from the pictures, as it depends on specific monitor settings and light brightness. We highly appreciate all customers opinions to improve the selling, also if anything you unsatisfied, please contact us for probable best solution. Package Includes: 5Pcs

  • Brand: Ximimark
  • ASIN: B07K7JF3HX
  • UPC: 657835628741

BeElion 4CH Color Video Quad Splitter, CCTV DVR Camera Video Splitter Processor Switch System

BeElion 4CH Color Video Quad Splitter, CCTV DVR

Features: * 100% brand new ; * Conenct up to 4 video camera; * Adjustable brightbess, Contrast, Saturation, Hue and Sharpness; * Various Display Modes: Quad Split Mode, Ful Screen Mode, PIP Screen Mode, Non-realtime 8 Split Mode, Dual Split Mode and Auto Sequence Mode; * High performance Freeze Function, flicker free image capture; * High performance Zoon Function, selectable zoonm area; * Various Overlay Information: Camera Title, Real Time and Date, Alarm/Loss/Motion Message. Specifications: * Material Metal, Plastic * Power DC 12V * Power by 1 x DC 12V 1A Battery(Not included) * Video Standard : PAL: 25 frames / sec ; NTSC: 30 frames / sec. * Video Input : 4 channel video inputs Peak : 1Vp-p Impedance : 75ohm¸ * Video output: 1 channel video output peak : 1Vp-p Impedance : 75ohm¸ * Resolution PAL: 720 x 576 50Hz * NTSC: 720 x 480 60Hz * Quad System Size (Approx.) 14.1 x 10 x 2.7cm / 5.5 x 3.9 x 1.1 Inch Package Content: 1 x Quad DVR Camera Splitter 1 x Remote control 1 x Manual 1 x Package box

  • Brand: BeElion
  • ASIN: B01H4N398A
  • UPC: 759218048105

Analog/Digital MUX Breakout for Arduino

Analog/Digital MUX Breakout for

This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip can be used to connect 16 analog sources (like sensors) to 5 pins on a microcontroller. 4 of the pins must be digital pins, 1 pin must be an analog to digital conversion pin. This allows 16 sensors to operate on only 5 pins of a micro! This is a great way to connect a lot of sensors to a few pins. You can also run the mux/demux the other direction. One serial stream connected to the SIG pin can be piped to multiple outputs. The mux/demux also works with digital signals (like serial, I2C, SPI). This means you can hook up multiple serial devices (like a GPS TX pin, and a XBee DOUT pin) to one RX pin on a microcontroller. The IC can control analog voltages that vary across the voltage supply range. The bidirectional switches allow any analog or digital input to be used as an output and vice-versa with a "Break-Before-Make" switching of 6ns at 4.5V. In addition, the switches have low "on" resistances and low "off" leakages. Includes and enable control which when high will disable all switches to their "off" state.

  • Brand: SparkFun
  • ASIN: B0068QD86S
  • UPC: 609456348041

InstallerCCTV Video Quad Color 8CH Multiplexer 2 BNC Output with Loop, Remote Control and FREE 2Amp power adapter

InstallerCCTV Video Quad Color 8CH Multiplexer 2 BNC

InstallerCCTV 8CH Video Color Quad Multiplexer with Loopout InstallerCCTV 8CH Video Color Quad Multiplexer is perfect for viewing 8 Traditional Analog Cameras at once. Great for those who only wants to view their camera and do not need to record. In addition, our multiplexer have loop out function Features: 8 Channel Color Quad Multiplexer Loopout Function Multiple Display Modes: 8 pictures, 4 pictures, 2 picture Adjustable Brightness, Saturation, Contrast, Hue And Sharpness Build-In Buzzer Specifications: Monitor Resolution NTSC: 720 x 480, PAL: 720 x 576 Video Input: 1.0Vp-p75 ohm Tape Input/Output: 1.0Vp-p75 ohm Alarm Mode: Video Lost Warning Video Input Mode: Full Screen, Electronic Amplication, PIP and Auto Sequence Working Voltage: DC12v/2A Environmental Temperature: -30°C-60°C Package Includes: 1x 8CH Quad Multiplexer 1x 2Amp Power Adapter 1x Remote Control 1x User Manual

  • Brand: InstallerCCTV
  • ASIN: B076B74CZF

E-link 2 Channel Video multiplexer Over one coaxial Cable for Normal Standard Analog Cameras only, Not Support AHD/CVI/TVI 720P/1080P Camera

E-link 2 Channel Video multiplexer Over one coaxial

E-link LNK-MV201 series video multiplexer bound the 2-ch video signal of the standard cameras and theTransmitter and a Receiver. From the receiver to the transmitter, it transmits 2 channel video signals through one coaxial cable to long distance. Besides, as you don't need to install extra cable for data signals, you can save your money and time. Features 2Channel video signal for standard analog camera over 1 coaxial cable Designed according to projects with minimum installation volume requirement Long distance transmission up to 500m Frequency Division Multiplexing, with all video and data transmission real-time and all images high-definition and non-delay. Non-debug, adaptive: as long as the transmission distance range, the device willautomatically adjust their targets, One coaxial cable, no extra cable, which save infrastructure cost,(cost saving 25~30%) Maintaining high quality video & anti-interference immunity Easy installation with BNC harnessPower Supply:DC12V/1ADimension:158*124*39mm It does not come with power because the camera usually provides a centralized power supply. Video Coax Multiplexors direct connection to a centralized power supply not only reduces cable clutter and reduces costs,

  • Color: Black 2 CH
  • Brand: E-link
  • ASIN: B071YLCLD3

Major Brands CD4051 ICS and Semiconductors, Single 8 Channel Analog Multiplexer (Pack of 15)

Major Brands CD4051 ICS and Semiconductors, Single 8

This is a CMOS 8-bit successive approximation A/D converter that uses a differential potentiometric ladder-similar to the 256R products. This converter is designed to allow operation with the NSC800 and INS8080A derivative control bus with TRI-STATE output latches directly driving the data bus. This A/D appears like memorylocations or I/O ports to the microprocessor and no interfacing logic is needed.

  • Brand: Xytronic
  • ASIN: B00B886RDW

WiseupTM 16Ch Real time Video Multiplexer Motion Detection CCTV Security Video Quad Processor with Remote Control

WiseupTM 16Ch Real time Video Multiplexer Motion Detection

WISEUP 16Channel Realtime Color Video Quad Key Features: 1) 16Ch Real-time Display ,Support 16 image split display, 9 image split display, 8 image split display, Quad image display. Each image quality can adjustable 2) 2 PIP functions and 1PIP function, each PIP position adjustable and image channel name can be edited 3) Dual Split function, each picture position adjustable and image channel name can be edited 4) Zoom function, a zoomed area can be moved while zoom function is invoked 5) High quality image freezing function, multi images can be froze on different channels 6) Image losing alarm ,Images are switchable automatically ,60 groups event records 7) Each channel number can be edited ,Screen position and alarm duration adjustable 8) Support RS485 and RS232 Connection ,Loop-through Function ,Support IR remote controller 9) Chinese/English OSD Menu ,Alarm Out:No Spec Info: 1) Video System:NTSC/PAL ,Image Refreshing Speed:PAL: 25 f/s;NTSC: 30f/s ,Frame Rate:400f/s (PAL) ; 480f/s (NTSC) ,Image Resolution:PAL:720×576;NTSC:720×480 2) Video Input :16 channel video signal input ,1Vp-p,75Ω ,1 channel recording playback video signal input, 1Vp-p,75Ω 3) Video Output:1 channel master monitor output, 1Vp-p,75Ω ,1 channel slave monitor output, 1Vp-p,75Ω ...

  • Brand: WISEUP
  • ASIN: B00LSCXD0I
  • UPC: 522289274328

16-Channel Analog Switch Module/Digital MUX Breakout Board- CD74HC4067

16-Channel Analog Switch Module/Digital MUX Breakout Board-

This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx). It works with both digital and analog signals (the voltage can¡¯t be higher than VCC), and the connections function in either direction. To control it, connect 4 digital outputs to the chip¡¯s address select pins (S0-S3), and send it the binary address of the channel you want (see the datasheet for details). This allows you to connect up to 16 sensors to your system using only 5 pins! ? Since the mux/demux also works with digital signals, you can use it to pipe TTL-level serial data to or from multiple devices. For example, you could use it to connect the TX pins of 16 devices to one RX pin on your microcontroller. You can then select any one of those 16 devices to listen to. If you want two-way communications, you can add a second board to route your microcontroller¡¯s TX line to 16 device¡¯s RX lines. By using multiple boards, you can create similar arrangements for I2C, SPI, etc. ? The internal switches are bidirectional, support voltages between ground and VCC, have low ¡°on¡± resistance and low ¡°off¡±...

  • Brand: Generic
  • ASIN: B0183KFEZE
  • UPC: 053722859449

KINWAT 10pcs/lot CD74HC4067 16-Channel Digital Multiplexer Breakout Board Module

KINWAT 10pcs/lot CD74HC4067 16-Channel Digital Multiplexer Breakout Board

10pcs/lot CD74HC4067 16-Channel Digital Multiplexer Breakout Board Module For

  • Brand: KINWAT
  • ASIN: B07DW1YFGX

NOYITO CD74HC4067 CMOS 16-Channel Digital Analog Multiplexer Breakout Module for Arduino

NOYITO CD74HC4067 CMOS 16-Channel Digital Analog Multiplexer Breakout

Description: This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx). It works with both digital and analog signals (the voltage can't be higher than VCC), and the connections function in either direction. To control it, connect 4 digital outputs to the chip's address select pins (S0-S3), and send it the binary address of the channel you want . This allows you to connect up to 16 sensors to your system using only 5 pins! Since the mux/demux also works with digital signals, you can use it to pipe TTL-level serial data to or from multiple devices. For example, you could use it to connect the TX pins of 16 devices to one RX pin on your microcontroller. You can then select any one of those 16 devices to listen to. If you want two-way communications, you can add a second board to route your microcontroller's TX line to 16 device's RX lines. By using multiple boards, you can create similar arrangements for I2C, SPI, etc. The internal switches are bidirectional, support voltages between ground and VCC, have low "on" resistance and low "off" leakage, and to prevent crosstalk, perform...

  • Brand: NOYITO
  • ASIN: B07C3L3YGL
  • UPC: 667797749347

10 Pcs CD4051 DIP-16 Single 8 Channels Analog Multiplexer IC

10 Pcs CD4051 DIP-16 Single 8 Channels Analog

The CD4051B is a single 8-Channel multiplexer having three binary control inputs, A, B, and C, and an inhibit input. The three binary signals select 1 of 8 channels to be turned on, and connect one of the 8 inputs to the output.

  • Brand: Jekewin
  • ASIN: B071GKXHBS

CCTV Camera Pros VM-16RT BNC Video Mux | 16 Channel CCTV Security Camera Multiplexer | Real-time Live Streaming Refresh Rate | Monitor Spot/Loop Out

CCTV Camera Pros VM-16RT BNC Video Mux |

The VM-16RT video mux, also known as a CCTV multiplexer, supports up to 16 channels of analog cameras or video from other analog devices using BNC connectors. BNC to RCA converters may be used for analog video devices that use RCA connectors and RCA cables. For CCTV cameras, BNC video inputs are typically used. The VM-16RT real-time video multiplexer has 16 BNC video inputs and 16 BNC video loop outputs. There are two BNC video outputs which can be used for multiple monitors, or one for a monitor, and one for a surveillance VCR. The VM-16RT is capable of controlling pan, tilt, zoom cameras (PTZ cameras) using the RS-485 terminals. A wireless remote control is included with the VM-16RT multiplexer which can be used to control switching the screen views and to access and control the on-screen display settings. The VM-16RT is built in a 1U rack-mountable case and the rackmount kit is included for this CCTV Mux.

  • Brand: CCTV Camera Pros
  • ASIN: B07D7H3HWJ
  • UPC: 818194010480

Premium 8-Channel Split Screen Surveillance Video Multiplexer

Premium 8-Channel Split Screen Surveillance Video

8-Channel Picture-In-Picture Video Processor With Audio Support This advanced picture-in-picture processor provides a cost-effective solution of combining all or selected video inputs together into different style of split-screen views for one screen display. Audio Support This quad PIP video processor supports audio inputs and output. There are total of 4 audio inputs in 3.5mm headphone style so each video input has its audio input channel to be associated with. Real-Time 18 Split Screen Modes Each split screen mode is easily activated through using the front push buttons or IR remote. All the multi-channel screens displayed in cycling sequence until the desired one selected for 8-channel, quad screen, 3-channel PIP, 2-channel PIP, single channel full screen display. Automatic Sequence Switching Support Sequence switching to cycle through all video inputs from various cameras or video devices can be done manually or by programming sequential dwell times of 1 to 99 seconds for each camera. Easy On-Screen Configuration This unit can be controlled through the push buttons on the front panel or the supplied remote controller. Time/Date Stamp Support The date/time stamp on the screen can be used for display and video recording. Users can choose to show information of date, current ti...

  • Brand: AllAboutAdapters
  • ASIN: B07H73LQDP

SODIAL(R) CD74HC4067 Analogue/Digital Module MUX-Breakout-16-Channel-Multiplexer

SODIAL(R) CD74HC4067 Analogue/Digital Module

* SODIAL is a registered trademark. ONLY Authorized seller of SODIAL can sell under SODIAL listings.Our products will enhance your experience to unparalleled inspiration. SODIAL(R) CD74HC4067 Analogue/Digital Module MUX-Breakout-16-Channel-MultiplexerSince the mux/demux also works with digital signals, you can use it to pipe TTL-level serial data to or from multiple devices. For example, you could use it to connect the TX pins of 16 devices to one RX pin on your microcontroller. You can then select any one of those 16 devices to listen to. If you want two-way communications, you can add a second board to route your microcontroller's TX line to 16 device's RX lines. By using multiple boards, you can create similar arrangements for I2C, SPI, etc.The internal switches are bidirectional, support voltages between ground and VCC, have low "on" resistance and low "off" leakage, and to prevent crosstalk, perform "break-before-make" switching. The board also breaks out the chip's "enable" pin, which when driven high, will completely disconnect the common pin (all switches "off").2V to 6V operation"On" resistance 70 Ohms @ 4.5V6ns break-before-make @ 4.5VWide operating temperature range: -55Degrees Celsius to 125Degrees Celsiussize:2.0*1.2CM/0.79*0.47 inchmaterial:CCLcolour:BLUE Package co...

  • Brand: SODIAL
  • ASIN: B073WBSV46
  • UPC: 191466821190

CCTV Camera Pros VM-HD16 16ch HD CCTV Multiplexer | Analog AHD HDCVI HD-TVI Video Processor | BNC VGA HDMI Output

CCTV Camera Pros VM-HD16 16ch HD CCTV Multiplexer

The VM-HD16 is a 16 channel HD CCTV video multiplexer that supports AHD, HD-TVI, HDCVI, and analog security cameras. Each of the 16 BNC video inputs accepts any of the supported CCTV camera types. There is no need to have all of the cameras in the same format. In addition to the 16 BNC video inputs, there are 16 BNC video loop outputs; one for each input. This is provided so that the video from each camera has the option to be connected to a second device. The VM-HD16 supports dual monitor outputs via the HDMI and VGA outputs. This means that the HDMI and VGA outputs can both be used at the same time. In addition, the Analog BNC video output can also be used with both the HDMI and VGA outputs connected. The multiple video outputs allow the multiplexer to be connected to any HDMI, VGA, or BNC monitor. In order to display 720p or 1080p video resolution, either the HDMI or VGA output must be used. The BNC video output supports 720 x 480 resolution (NTSC) and 720 x 576 (PAL). An infrared wireless remote control is included with the VM-HD16 multiplexer, which can be used to control the screen views and to access the other screen display settings. This unit is enclosed in a 1U rack-mountable case and the rackmount kit is included.

  • Brand: CCTV Camera Pros
  • ASIN: B07D7HHB7C
  • UPC: 818194013276

GVI GV-MUX16TC Black Rack Mount 16 Channel Color Multiplexer

GVI GV-MUX16TC Black Rack Mount 16 Channel Color

Brand: GVI Part Number: GV-MUX16TC Model: GV-MUX16TC Type: 16 Channel Color Multiplexer Form Factor: Rack Mount General Specification: Power adapter: 110/240V AC Universal adapter Power requirement: 12V DC/2.5Amps Camera Inputs: 16 BNC Loop Out (auto terminating): 16 BNC Main Monitor Out (CVBS):1 BNC VCR In (CVBS):1 BNC VCR Out (CVBS):1 BNC Alarm Input/Output:Terminal block RS232 (RX/TX):Terminal block RS485 (RX/TX):2 RJ45 Spot (Aux) Out:4 BNC Power:2.1mm pin type; female Operating Defaults: Format: 4X4 multi-screen format Display: Live Video: Format: NTSC/PAL standard Level: Camera Inputs: 1.0Vp-p, 75 Ohms Camera Outputs: 1.0Vp-p, 75 Ohms VCR Inputs: 1.0Vp-p, 75 Ohms VCR Output: 1.0Vp-p, 75 Ohms Alarm: Camera Alarm : Input 16 inputs with individual polarity selection; activated by contact closure or TTL/CMOS signal Alarm Output: One NO and NC contact with shared common; 1.0A and 24V dc (resistive only) Alarm Hold Time: 20 seconds default; menu selectable 0 to 99 seconds Alarm Buzzer: On/Off selectable Resolution (pixels x lines): Sampling: 720 X 480 Full (Active): 648 X 448 (10 to 9 down-scaling) 1/4 size: 324 X 224 1/9 size: 216 X 149 1/16 size: 162 X 112 4/9 size: 432 X 298 9/16 size: 486 X 336 VCR out (full): 720 X 480 Spot out: analog Condition: Manufacturer Refurbished Thi...

  • Brand: Unknown
  • ASIN: B07G4KMLKR
  • UPC: 614486650552

TOOGOO(R) 5pcs LOT CD74HC4067 16-Channel Digital Multiplexer Breakout Board Module For Arduino

TOOGOO(R) 5pcs LOT CD74HC4067 16-Channel Digital Multiplexer Breakout

* SODIAL is a registered trademark. ONLY Authorized seller of SODIAL can sell under SODIAL listings.Our products will enhance your experience to unparalleled inspiration. SODIAL(R) 5pcs LOT CD74HC4067 16-Channel Digital Multiplexer Breakout Board Module For ArduinoTo control it, connect 4 digital outputs to the chip's address select pins (S0-S3), and send it the binary address of the channel you want (see the datasheet for details). This allows you to connect up to 16 sensors to your system using only 5 pins!Since the mux/demux also works with digital signals, you can use it to pipe TTL-level serial data to or from multiple devices. For example, you could use it to connect the TX pins of 16 devices to one RX pin on your microcontroller. You can then select any one of those 16 devices to listen to. If you want two-way communications, you can add a second board to route your microcontroller's TX line to 16 device's RX lines. By using multiple boards, you can create similar arrangements for I2C, SPI, etc.The internal switches are bidirectional, support voltages between ground and VCC, have low "on" resistance and low "off" leakage, and to prevent crosstalk, perform "break-before-make" switching. The board also breaks out the chip's "enable" pin, which when driven high, will complete...

  • Color: Blue
  • Brand: SODIAL(R)
  • ASIN: B0762FGN6J
  • UPC: 192090140244

SODIAL(R) CD74HC4067 CMOS 16 CH Analog Digital MUX Breakout Board for Arduino

SODIAL(R) CD74HC4067 CMOS 16 CH Analog Digital MUX

* SODIAL is a registered trademark. ONLY Authorized seller of SODIAL can sell under SODIAL listings.Our products will enhance your experience to unparalleled inspiration. SODIAL(R) CD74HC4067 CMOS 16 CH Analog Digital MUX Breakout Board for Arduino For example, you could use it to connect the TX pins of 16 devices to one RX pin on your microcontroller. You can then select any one of those 16 devices to listen to. If you want two-way communications, you can add a second board to route your microcontroller's TX line to 16 device's RX lines. By using multiple boards, you can create similar arrangements for I2C, SPI, etc.The internal switches are bidirectional, support voltages between ground and VCC, have low "on" resistance and low "off" leakage, and to prevent crosstalk, perform "break-before-make" switching. The board also breaks out the chip's "enable" pin, which when driven high, will completely disconnect the common pin (all switches "off").2V to 6V operation"On" resistance: 70 Ohms @ 4.5V6ns break-before-make @ 4.5VWide operating temperature range: -55 Degrees Celsius to 125 Degrees Celsiussize:2.0*1.2CM/0.79*0.47 inchmaterial:CCLcolour:PURPLEPackage Included:1 X Breakout BoardNote: Light shooting and different displays may cause the color of the item in the picture a little ...

  • Brand: SODIAL
  • ASIN: B073WB8Z9X
  • UPC: 191466821213

(20PCS) CD74HC4067M96 IC MUX/DEMUX 1X16 24SOIC HC4067 74HC4067

(20PCS) CD74HC4067M96 IC MUX/DEMUX 1X16 24SOIC HC4067

Part NO.:CD74HC4067M96Package:24-SOICDescription:IC MUX/DEMUX 1X16 24SOICSupplier:SICSTOCKFunction:Multiplexer/DemultiplexerCircuit:1 x 1:16On-State Resistance:160 OhmVoltage Supply Source:Single SupplyVoltage - Supply, Single/Dual (±):2 V ~ 6 VCurrent - Supply:8µAOperating Temperature:-55°C ~ 125°CMounting Type:Surface MountSupplier Device Package:24-SOIC

  • Brand: SICSTOCK
  • ASIN: B016G5ED82
  • UPC: 350823298833

TOOGOO(R) CD74HC4067 Analogue/Digital Module MUX-Breakout-16-Channel-Multiplexer

TOOGOO(R) CD74HC4067 Analogue/Digital Module

* TOOGOO is a registered trademark. ONLY Authorized seller of TOOGOO can sell under TOOGOO listings.Our products will enhance your experience to unparalleled inspiration. TOOGOO(R) CD74HC4067 Analogue/Digital Module MUX-Breakout-16-Channel-MultiplexerSince the mux/demux also works with digital signals, you can use it to pipe TTL-level serial data to or from multiple devices. For example, you could use it to connect the TX pins of 16 devices to one RX pin on your microcontroller. You can then select any one of those 16 devices to listen to. If you want two-way communications, you can add a second board to route your microcontroller's TX line to 16 device's RX lines. By using multiple boards, you can create similar arrangements for I2C, SPI, etc.The internal switches are bidirectional, support voltages between ground and VCC, have low "on" resistance and low "off" leakage, and to prevent crosstalk, perform "break-before-make" switching. The board also breaks out the chip's "enable" pin, which when driven high, will completely disconnect the common pin (all switches "off").2V to 6V operation"On" resistance 70 Ohms @ 4.5V6ns break-before-make @ 4.5VWide operating temperature range: -55Degrees Celsius to 125Degrees Celsiussize:2.0*1.2CM/0.79*0.47 inchmaterial:CCLcolour:BLUE Package co...

  • Color: BLUE
  • Brand: TOOGOO
  • ASIN: B073WB9QQV

Megmoki CD74HC4067 Analogue/Digital MUX Breakout 16 Channel Multiplexer

Megmoki CD74HC4067 Analogue/Digital MUX Breakout 16 Channel

This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067.This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx). It works with both digital and analog signals (the voltage can't be higher than VCC), and the connections function in either direction. To control it, connect 4 digital outputs to the chip's address select pins (S0-S3), and send it the binary address of the channel you want (see the datasheet for details). This allows you to connect up to 16 sensors to your system using only 5 pins! Since the mux/demux also works with digital signals, you can use it to pipe TTL-level serial data to or from multiple devices. For example, you could use it to connect the TX pins of 16 devices to one RX pin on your microcontroller. You can then select any one of those 16 devices to listen to. If you want two-way communications, you can add a second board to route your microcontroller's TX line to 16 device's RX lines. By using multiple boards, you can create similar arrangements for I2C, SPI, etc. The internal switches are bidirectional, support voltages between ground and VCC, have low "on" resistance and low "off" leakage, and to prevent crosstalk...

  • Brand: Megmoki
  • ASIN: B075ZTKF6T
  • UPC: 698775157878

16-Channel RCA BNC Video Multiplexer Picture-In-Picture Generator

16-Channel RCA BNC Video Multiplexer Picture-In-Picture

Professional 16-Channel Video Multiplexer Picture-In-Picture Video Processor This multi-channel video mixer provides a cost effective solution of combining multiple video inputs together into one split screen view for display or recording.The PIP or split-screen window screen format and position can be controlled by using the supplied IR remote, front panel push buttons or RS232/RS485 connection with a PC for distant PTZ control. 16 screen mode options presented in 16/9/8/4/3-grid, quad screen, PIP, picture-by-picture style or single channel full screen. Featured with total of 16 video inputs + 16 video loop-through + 4 audio inputs with 2 composite BNC/RCA video outputs, 1 VGA simultaneous output at 1024x768 pixels max and 1 audio output. All NTSC and PAL video devices or TV monitors are supported. Alarm support for video loss detection, motion detection, external alarm with buzzer sound. Unit is also 1U rack-mount ready. Real-Time Multi-Channel Screen Modes This split screen video processor can overlay all the selected input channels into different formation for viewing or presentation. All video input channels can be presented in the following 16 matrix screen modes: 16-channel split screen 9-channel split screen 8-chnanel split screen 4-channel split screen 3-channel PIP scr...

  • Brand: AllAboutAdapters
  • ASIN: B073KTK4QN

DEVMO 2PCS CD74HC4067 16 Channel Analog Digital Multiplexer MUX Breakout Board Module US

DEVMO 2PCS CD74HC4067 16 Channel Analog Digital Multiplexer

- This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board)to one of 16 channel pins (CHANxx). It works with both digital and analog signals (the voltage can't be higher than VCC) and the connections function in either direction. To control it, connect 4 digital outputs to the chip's address select pins (S0-S3) and send it the binary address of the channel you want (see the datasheet for details). This allows you to connect up to 16 sensors to your system using only 5 pins.

  • Brand: DEVMO
  • ASIN: B07R55JMDR
  • UPC: 741722788776

(5PCS) 74HC4067N,652 IC MUX/DEMUX 1X16 24DIP 74HC4067N HC4067 74HC4067

(5PCS) 74HC4067N,652 IC MUX/DEMUX 1X16 24DIP 74HC4067N HC4067

Part NO.:74HC4067N,652Package:24-DIPDescription:IC MUX/DEMUX 1X16 24DIPSupplier:SICSTOCKFunction:Multiplexer/DemultiplexerCircuit:1 x 1:16On-State Resistance:120 OhmVoltage Supply Source:Single SupplyVoltage - Supply, Single/Dual (±):2 V ~ 10 VCurrent - Supply:16µAOperating Temperature:-40°C ~ 125°CMounting Type:Through HoleSupplier Device Package:24-DIP

  • Brand: SICSTOCK
  • ASIN: B016G52JWE
  • UPC: 340340531469

5PCS 74HC4051 74HC4051E DIP-16 HC4051 8-channel analog multiplexer NEW

5PCS 74HC4051 74HC4051E DIP-16 HC4051 8-channel analog multiplexer

5PCS 74HC4051 74HC4051E DIP-16 HC4051 8-channel analog multiplexer NEW

  • Brand: Keian Na Co., Ltd.
  • ASIN: B071X6PWZF

Gimax CD74HC4067 16-Channel Analog Digital Multiplexer Breakout Board Module

Gimax CD74HC4067 16-Channel Analog Digital Multiplexer Breakout Board

Notice: The new tracking number for China Post Ordinary Small Packet Plus can be traced only befor it arrive the airport of your country,please choose China Post Air Mail if you want a full tracking info. This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board)to one of 16 channel pins (CHANxx). It works with both digital and analog signals (the voltage can't be higher than VCC), and the connections function in either direction. To control it, connect 4 digital outputs to the chip's address select pins (S0-S3), and send it the binary address of the channel you want (see the datasheet for details). This allows you to connect up to 16 sensors to your system using only 5 pins! Since the mux/demux also works with digital signals, you can use it to pipe TTL-level serial data to or from multiple devices. For example, you could use it to connect the TX pins of 16 devices to one RX pin on your microcontroller. You can then select any one of those 16 devices to listen to. If you want two-way communications, you can add a second board to route your microcontroller's TX line to 16 device's RX lines. By using multiple boards, you ...

  • Brand: GIMAX
  • ASIN: B07PPQJL7R
  • UPC: 703797533385

Zmodo 32 Channel 1080p HDMI NVR 8 Simplified PoE Camera + 8 Wireless Camera Outdoor 720p HD Security System,24/7 Recording & Remote Monitoring, w/Repeater Flexible Installation

Zmodo 32 Channel 1080p HDMI NVR 8 Simplified

Package Includes 1) 32 Channel Security NVR 1) Eight-channel sPoE Repeater 8) Zmodo 720p IP Network sPoE Camera 8) Zmodo 720p Indoor/Outdoor Wireless Camera1) 12V 2A NVR Power Supply 8) 5V 1A Micro USB Power Supply (about 6ft) 1) 8M(26ft) CAT5e Network Cable 1) 1M(3ft) CAT5e Network Cable 2) 15M(50ft) Camera Cable 4) 25M(82ft) Camera Cable2) 30M(98ft) Camera Cable 1) Quick User Guide Specification Camera View Angle: 81 degrees NVR Dimensions: 7.9”x5.5”x1.6” sPoE repeater Dimensions: 4.65”x3.33”x1.46” Camera Working Temperature: 14-122℉/-10-50°C NVR/sPoE Repeater Working Temperature: 32-104℉/0-40°C NVR Storage: Supports 3.5″ SATA hard drive, up to 6TB (HDD not included) Gentle Reminders 1) Please do not directly plug the NVR power supply into power outlet before connecting it to the NVR, which may lead to sparking. 2) It is not suggested to install the wireless cameras in a metal-enclosed environment, which will reduce WiFi signal transmission. 3) A WiFi router is needed for the system to provide data transmission and the Hard Drive is not included in the package.

  • Color: Red
  • Brand: Zmodo
  • ASIN: B074ZDX9RD
  • UPC: 889490013826
Similar 16 Channel Multiplexer Shopping Results