Powerbuilt 644123 Metric 19mm Polished Combination Wrench

Powerbuilt 644123 Metric 19mm Polished Combination

Powerbuilt combination wrenches meet or exceed ANSI length specifications and have chamfered edges on both the open and boxed ends. Boxed-ends also feature Z-Drive for stronger grip on fasteners. These combination wrenches feature mirror polished chrome vanadium construction and a convenient 15 degree offset.

  • Brand: Alltrade
  • ASIN: B002INUOCG
  • UPC: 028907270081

Item # 701053, TU Steel-Backed PTFE Lined Sleeve Bearings - Metric

Item # 701053, TU Steel-Backed PTFE Lined Sleeve

17 MM I.D. x 19 MM O.D. x 20 MM Length, TU, Steel Back, PTFE & Pb Lined Composite, Sleeve Bearing, Metric

  • Brand: Isostatic
  • ASIN: B00IG7NKPQ
  • UPC: 846802068202

TEKTON 3/8-Inch Drive Socket Set, Inch/Metric, 5/16-Inch - 7/8-Inch, 10 mm - 19 mm, 22-Piece | 1061

TEKTON 3/8-Inch Drive Socket Set, Inch/Metric, 5/16-Inch -

Complete yet compact, the TEKTON 22-pc. 3/8 in. Drive Socket Set has every size from 5/16 to 7/8 inch and 10 to 19 mm. Each socket has a high-torque, 6-point design that grips the flat sides of fasteners, not the corners, preventing round-off. Needing just 5 degrees of swing to operate, the smooth, finely geared 72-tooth ratchet isn't limited by tight spaces. Its quick-release drive tang locks onto sockets so they won't stick on the fastener or fall off. For superior performance, all tools are made from premium chrome vanadium steel and are protected by a mirror chrome plated finish.Set Includes: 10-pc. 3/8 in. drive shallow 6-pt. inch sockets: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8 inch 10-pc. 3/8 in. drive shallow 6-pt. metric sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm 1-pc. 3/8 in. drive extension bar: 3 in. 1-pc. 3/8 in. drive 72-tooth ratchet: 7 in.

  • Brand: TEKTON
  • ASIN: B00DPLNL5C
  • UPC: 020209010617

WINMAX TOOLS AUTOMOTIVE 16pc Blind Hole Pilot Bearing Puller Internal & Extractor Remove w/Slide Hammer

WINMAX TOOLS AUTOMOTIVE 16pc Blind Hole Pilot Bearing

One Slide hammer assemble 2.5 jaws. For removal of Pilot Bushes Bearings etc. form blind housings. Thread:M10×1.5p, M10×1.5p,M8×1.25p, M10×1.5p M6×1.0p 10 x Collects ( segment grip type) 8-11mm 12-17mm 13-23mm 18-23mm 24-29mm 30-34mm 34-38mm 39-43mm 44-48mm 49-53mm 54-58mm Screw adaptors M10x1.5p, M10x1.5p/M8x1.25p, M10x1.5p/M6x1.0p 1 x Counter stay puller For both the Professional and Diy use. Split collet type Blind / Internal /Bearing Puller Collets are made from chrome molybdenum steel Turn and they expand to grip the inner bearing race.

  • Brand: WINMAX TOOLS AUTOMOTIVE
  • ASIN: B017XDLDDY

NSK 6306 Deep Groove Ball Bearing, Single Row, Open, Pressed Steel Cage, Normal Clearance, Metric, 30mm Bore, 72mm OD, 19mm Width, 9500rpm Maximum Rotational Speed, 3372lbf Static Load Capacity, 6002lbf Dynamic Load Capacity

NSK 6306 Deep Groove Ball Bearing, Single Row,

The NSK 6300 series deep groove ball bearing is an open ball bearing with metric dimensions and normal clearance. It has a single-row deep-groove geometry for high speeds and supporting both radial and axial loads. This single-row bearing has normal radial internal clearance for applications that do not involve thermal expansion or atypical precision. The pressed steel cage evenly spaces the balls for even load distribution and prevents contact to reduce friction, vibrations, and noise. The bearing has an open configuration for lubrication in place and for use in applications with little exposure to dirt, grime, debris, and other contaminants. This NSK 6300 series deep groove bearing is for use in applications that involve combined radial and axial loads and a need for high running accuracy and stiffness at high rotational speeds. Such applications include clutches, drives, gearboxes, compressors, pumps, turbines, and printing and textile machines, among others.Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sea...

  • Brand: NSK
  • ASIN: B0071AUYNA
  • UPC: 029176016691

Amana Tool - 47711 Metric Steel Ball Bearing Guide 19mm Overall Dia x 6mm Inner Dia x 6mm

Amana Tool - 47711 Metric Steel Ball Bearing

Amana Tool uses only the finest industrial quality precision ball bearings available. Bearings are double steel-shielded for extra rigidity and to inhibit dust. A special high-performance, high-temperature grease is used for maximum life., #47711, diameter (D) 19mm, application Rc Series flush trim bits., B 6mm (15/64), D 6mm, 47711 Metric steel ball bearing guide 19mm Overall DIA x 6mm inner DIA x 6mm height

  • Brand: Amana Tool
  • ASIN: B000P4LVFY
  • UPC: 738685877111

WJB 6306-20-2RS Deep Groove Ball Bearing, Double Sealed, Metric, 31.75mm ID, 72mm OD, 19mm Width, 6700lbf Dynamic Load Capacity, 3800lbf Static Load Capacity

WJB 6306-20-2RS Deep Groove Ball Bearing, Double Sealed,

The WJB 6300-2RS series deep groove ball bearing is a double-sealed ball bearing and has a single-row deep-groove geometry for high speeds and supporting both radial and axial loads. Seals on both sides of the bearing fasten to the outside ring and extend over the rolling elements to make contact with the inside ring, keeping out contaminants such as dirt and grime. The seals also hold in a high-quality lubricant applied at manufacture that will last the entire lifetime of the bearing, making it maintenance free. This 6300-2RS series deep groove double-sealed ball bearing is for use in applications that involve combined radial and axial loads and a need for high running accuracy and stiffness at high rotational speeds. Such applications include clutches, drives, gearboxes, compressors, pumps, turbines, and printing and textile machines, among others.Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant ...

  • Brand: WJB
  • ASIN: B007HSCVNC

WORKPRO 24-Piece Compact Drive Sockets Set 3/8" Ratchet with Blow Molded Case

WORKPRO 24-Piece Compact Drive Sockets Set 3/8" Ratchet

The Kit Includes: 10PC 3/8" Dr. SAE sockets: 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8" 11PC 3/8" Metric sockets: 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm 3" Extension bar 5/8"(16mm) Spark plug 3/8" Ratcheting handle Durable blow molded case

  • Color: Black
  • Brand: WORKPRO
  • ASIN: B010AHBMFO
  • UPC: 798154047582

5x19x6mm 635Z Stainless Steel Deep Groove Bearing for Fidget Spinner- Machinery Parts Ball Bearing

5x19x6mm 635Z Stainless Steel Deep Groove Bearing for

Description: 5x19x6mm 635Z Stainless Steel Deep Groove Bearing for Fidget Spinner Specification: Material: Stainless Steel Dimensions: 5mm x 19mm x 6mm/Metric ID (inner diameter) / Bore: 5mm OD (outer diameter): 19mm Thickness: 6mm Quantity: 1pc Features: Can achieve the bearing inner ring and outer ring insulation. Performance of oil free self lubrication,Waterproof. High speed rotating bearings without noise and low friction. Used in Fidget Spinner. Package Included; 1pc x 635Z Bearing Notice:  1. Please allow a bit error due to manual measurement. please make sure you do not mind before you bid. 2. The color may have different as the difference display, pls understand. More Details:

  • Brand: Unknown
  • ASIN: B07MFJPW3S

Motion Pro 08-0397 Chrome Hex Axle Tool 17,19,22,24 mm

Motion Pro 08-0397 Chrome Hex Axle Tool 17,19,22,24

Fits internal hex on many late model sport bike axles and some dirt bikes. Four metric hex sizes: 17 millimeter, 19 millimeter, 22 millimeter and 24 millimeter. Fits Buell: XB9R, XB9S, XB12R, XB12S (2003-2004), Honda: CBR600RR, CBR1000RR, Kawasaki: ZX6R, ZX6RR, ZX600E/K, ZX7R, ZX9R, Z1000, Suzuki: GSXR 2000-2007, DL 1000 V-Strom (all), SV1000, Yamaha: R1, R6.

  • Color: Chrome
  • Brand: Motion Pro
  • ASIN: B009D3FPSM
  • UPC: 182682940963
Similar 19mm Metric Bearings Shopping Results