B&M 70420 Tork Master 2000 Torque Converter

B&M 70420 Tork Master 2000 Torque

Upgrading to a Tork Master torque converter with a higher stall speed can give you better acceleration from a dead stop. It allows the engine to launch the car at a higher RPM, where more torque and power are available. This can be especially important if other modifications (like larger cams) have reduced your low end power and torque. The Tork Master 2000 has a stall speed of 1900-2100 RPM (based on an engine producing 230 lb. ft. of torque at 2500 RPM), so it is best suited for mild performance applications, such as vehicles with minor engine modifications that don't produce more than 350 horsepower. It has been rebuilt with a new precision alloy steel pump drive tube, and it is pressure tested and fully balanced Please Note: This converter should not be used with a transbrake, and high stall torque converters can build extra heat, so supplementary transmission cooling is recommended to avoid premature transmission failure. Retains the lock-up feature on some applications.

  • Brand: B&M
  • ASIN: B000CIMZCG
  • UPC: 019695704209

B&M 20400 Tork Master 2000 Torque Converter

B&M 20400 Tork Master 2000 Torque

Upgrading to a Tork Master torque converter with a higher stall speed can give you better acceleration from a dead stop. It allows the engine to launch the car at a higher RPM, where more torque and power are available. This can be especially important if other modifications (like larger cams) have reduced your low end power and torque. The Tork Master 2000 has a stall speed of 1900-2100 RPM (based on an engine producing 230 lb. ft. of torque at 2500 RPM), so it is best suited for mild performance applications, such as vehicles with minor engine modifications that don't produce more than 350 horsepower. It has been rebuilt with a new precision alloy steel pump drive tube, and it is pressure tested and fully balanced Please Note: High stall torque converters can build extra heat, so supplementary transmission cooling is recommended to avoid premature transmission failure. This converter should not be used with a transbrake, and it requires a small (10-3/4") bolt circle flexplate or dual pattern flexplate.

  • Brand: B&M
  • ASIN: B000CIKBUE
  • UPC: 019695204006

JEGS Performance Products 60402K Torque Converter and Flexplate Kit GM TH350/TH4

JEGS Performance Products 60402K Torque Converter and Flexplate

Torque Converter and Flexplate KitGM TH350/TH400MSmall & Big Block Chevy & 90� V6168-ToothInternally Balanced2-Piece Rear MainStall Speed: 2000-2300 RPMHigh-Performance Series Flexplate Bolts Kit Includes:Torque Converter 555-60402Flexplate 555-601071High-Performance Series Flexplate Bolts 070-100-2901

  • Brand: JEGS
  • ASIN: B07DL835K4

TRANS_ONE Remanufactured HEAVY DUTY Triple Clutch Torque Converter 1996 1997 1998 1999 2000 2001 2002 2003 F250 F350 7.3L Powerstroke Diesel E4OD 4R100

TRANS_ONE Remanufactured HEAVY DUTY Triple Clutch Torque Converter

FOR 1996 - 2003 Ford F250 F350 7.3L Powerstroke Diesel for E4OD 4R100 Transmission HEAVY DUTY Torque Converter. For confirmation please provide your vehicle information, when you check out: Year , Make , Model , Engine Size , Transmission Type ? * Each part goes through 5-steps quality inspection. * Each part is machined for smoothness & cleanness. * We tig many of our converters as a standard procedure. * All lockup surfaces are machined for smooth surface. * All of our converters are pressure tested to prevent leaks. * All of our converters are balanced for vibration. * All of our converters are checked for runout. * Finally, all of our converters are spin-checked using input shaft. Torque converter fit and application is 100% the responsibility of buyer. If you have any doubts to your application, please message us before purchasing ! < High Stall Converter > Exact Stall Speed will depend on your vehicle's HP and Torque. Not for use with NOS or Blown Applications < Return policy > You can return within 30 days / uninstalled and resellable condition. < 1 year unlimited miles warranty > We warrant against defects in material and factory workmanship providing the proper installation methods are followed. This warranty is limited to the replacement of the torque unit purchased by ...

  • Brand: TRANS_ONE
  • ASIN: B07HR5S65D

Assault Racing Products 600002 GM TH350 Torque Converter 2000-2200 Stall Turbo 350

Assault Racing Products 600002 GM TH350 Torque Converter

GM Turbo 350 Torque Converter 2000-2200 Stall 1968-1981 TH-350, 10.5" bolt circle, non lock up This Assault Racing torque converter works great in performance street / strip modified small and big block engines with a stall speed of approximately 2000 to 2200 RPM depending on application. Converter is approx. 12" in diameter with a 10.5" flexplate bolt pattern. Welded not Furnace Brazed. Contrary to popular belief, furnace brazing is not the best way to adhere torque converter components to together. Just like a Teflon coated pan, after some time the furnace brazing will erode away and ruin the stators and all other rotating parts in your transmission. Industrial Bearings - No Light Duty Needle Bearings. Needle bearings are good, but not great. Industrial bearings give these converters the ability to handle not hundreds, but thousands of pounds of torque. Thatâ€TMs much better then the higher priced alternative converters. Aircraft Aluminum Washers - NO FIBER. Assault converters utilize an aircraft quality aluminum washer instead of those old fiber washers that other companies use. This allows for more horsepower and torque capabilities. NO Automation - ALL HAND BUILT. Assault torque converters are hand built and tested to ensure that you are getting the best converter money c...

  • Brand: Assault Racing Products
  • ASIN: B00S75E3PS

TRANS_ONE Remanufactured HEAVY DUTY Torque Converter A518 46RE Transmission 1996 1997 1998 1999 2000 2001 2002 2003 DODGE Ram,Dakota,Durango 5.2L 5.9L 90 Degree bolt pattern

TRANS_ONE Remanufactured HEAVY DUTY Torque Converter A518 46RE

FOR DODGE Ram Dakota Durango A518 46RE Transmission for 1996 UP 5.2L 5.9L 90 Degree bolt pattern HEAVY DUTY Torque Converter. For confirmation please provide your vehicle information, when you check out: Year , Make , Model , Engine Size , Transmission Type ? * Each part goes through 5-steps quality inspection. * Each part is machined for smoothness & cleanness. * We tig many of our converters as a standard procedure. * All lockup surfaces are machined for smooth surface. * All of our converters are pressure tested to prevent leaks. * All of our converters are balanced for vibration. * All of our converters are checked for runout. * Finally, all of our converters are spin-checked using input shaft. Torque converter fit and application is 100% the responsibility of buyer. If you have any doubts to your application, please message us before purchasing ! < High Stall Converter > Exact Stall Speed will depend on your vehicle's HP and Torque. Not for use with NOS or Blown Applications < Return policy > You can return within 30 days / uninstalled and resellable condition. < 1 year unlimited miles warranty > We warrant against defects in material and factory workmanship providing the proper installation methods are followed. This warranty is limited to the replacement of the torque unit...

  • Brand: TRANS_ONE
  • ASIN: B07HR66B22

TORCO GM Chevy GMC Stock 12" Torque Converter 1985-1997 - 4L60 4L60E 700R4 700 - 1 year warranty

TORCO GM Chevy GMC Stock 12" Torque Converter

Most DEPENDABLE converter you can buy at LOWEST price with over 27 years experience and over 99% satified customers. All units are remanufactured according to OEM specs or better. * Each part goes through 5-steps quality inspection * Each part is machined for smoothness & cleaness * We tig many of our converters as a standard procedure * All lockup surfaces are machined for smooth surface * All of our converters are pressure tested to prevent leaks * All of our converters are balanced for vibration * All of our converters are checked for runout * Finally, all of our converters are spin-checked using input shaft. We carry over 500 types of domestic and import torque converters to meet your needs.

  • Brand: Torco
  • ASIN: B014K0N75K

B&M 40437 Tork Master 2000 Torque Converter

B&M 40437 Tork Master 2000 Torque

Upgrading to a Tork Master torque converter with a higher stall speed can give you better acceleration from a dead stop. It allows the engine to launch the car at a higher RPM, where more torque and power are available. This can be especially important if other modifications (like larger cams) have reduced your low end power and torque. The Tork Master 2000 has a stall speed of 1900-2100 RPM (based on an engine producing 230 lb. ft. of torque at 2500 RPM), so it is best suited for mild performance applications, such as vehicles with minor engine modifications that don't produce more than 350 horsepower. It has been rebuilt with a new precision alloy steel pump drive tube, and it is pressure tested and fully balanced Please Note: This converter should not be used with a transbrake, and high stall torque converters can build extra heat, so supplementary transmission cooling is recommended to avoid premature transmission failure. Standard lockup feature is retained.

  • Brand: B&M
  • ASIN: B000CIGDNS
  • UPC: 019695404376

B&M 40427 Tork Master 2000 Torque Converter

B&M 40427 Tork Master 2000 Torque

Upgrading to a Tork Master torque converter with a higher stall speed can give you better acceleration from a dead stop. It allows the engine to launch the car at a higher RPM, where more torque and power are available. This can be especially important if other modifications (like larger cams) have reduced your low end power and torque. The Tork Master 2000 has a stall speed of 1900-2100 RPM (based on an engine producing 230 lb. ft. of torque at 2500 RPM), so it is best suited for mild performance applications, such as vehicles with minor engine modifications that don't produce more than 350 horsepower. It has been rebuilt with a new precision alloy steel pump drive tube, and it is pressure tested and fully balanced Please Note: This converter should not be used with a transbrake, and high stall torque converters can build extra heat, so supplementary transmission cooling is recommended to avoid premature transmission failure. Will not fit on some applications with 460 CID engine.

  • Brand: B&M
  • ASIN: B000CIIDEK
  • UPC: 019695404277

Hughes Performance GM20 Torque Converter

Hughes Performance GM20 Torque

Hughes Performance GM20 Torque Converter 2000 Stall Series GM TH350. Product Dimension (LxWxH): 14.1x14.2x7.3.

  • Brand: Hughes Performance
  • ASIN: B003TPP8PK
  • UPC: 012917000073

JEGS 60402 Torque Converter

JEGS 60402 Torque

Torque ConverterGM TH350/TH40010.75" Bolt CircleStall Speed: 2000-2300 RPM Please Note: Converter diameter may vary based on Core AvailabilityDoes not fit lock-up converter or clutch converter modelsSmall (10.75" bolt circle) flexplate or dual pattern flexplate requiredFor Big Block applications, use JEGS XHD ConvertersFluid Capacity ChartPerformance Torque ConverterGeneral Application Chart *Advertised Camshaft DurationRear Gear RatioEngine RPM Range & Compression RatioConverter RPM Stall Speeds **Stock to 260°Stock to 3.231000-46008 to 9.51500 to 1700Stock to 265°Stock to 3.231400-50008 to 9.51600 to 1800265° to 280°3.00 to 3.731600-60009.5 to 10.52200 to 2400280° to 300°3.55 to 4.562000-65009.5 to 113000 to 3400280° to 310°3.73 to 4.882800-700010 to 11.53500 to 3800290°+3.73+3400-800010.5 to 123500+*This chart is a guideline. The stall speed may vary in your application.**Recommended for use with Small Block engines...

  • Brand: JEGS
  • ASIN: B078WJ5GT5
  • UPC: 889944061649

ACDelco 24210864 GM Original Equipment Automatic Transmission Torque Converter Clutch Pulse Width Modulation Valve

ACDelco 24210864 GM Original Equipment Automatic Transmission Torque

ACDelco GM Original Equipment Automatic Transmission Control Solenoids are GM-recommended replacements for your vehicle’s original components. These solenoids are electro-hydraulic valves that help control the flow of fluid within the control valve body. They also help control clutch application pressure. These original equipment solenoids have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

  • Brand: ACDelco
  • ASIN: B0013FW1SK
  • UPC: 021625033433

A-Team Performance LS Swap Torque Stall Converter Hub Adapter Transmission Crank LT1 TH400 TH350 Compatible with 1998-2004 LS1 Based Engines

A-Team Performance LS Swap Torque Stall Converter Hub

A-Team Performance LS Swap Torque Stall Converter Hub Adapter Transmission Crank LT1 TH400 TH350 Compatible with 1998-2004 LS1 Based EnginesFit for 1998-2004 LS1 based engines using a TH350 or TH400 transmission. Also, fit for all LS/LT Crankshafts except 99-00 6.0 engines. If using a curved flexplate you'll need this adapter spacer. The spacer will center the nose of the converter to the curved flexplate.Easy installation and good ductility, conductivity, thermal conductivity and strong ferromagnetism.A-Team Performance parts are sold exclusively by Southwest Performance Parts.

  • Brand: A-Team Performance
  • ASIN: B07MF6GVHF

B&M 70417 Holeshot 2000 Torque Converter

B&M 70417 Holeshot 2000 Torque

Upgrading to a Holeshot torque converter with a higher stall speed can give you better acceleration from a dead stop. It allows the engine to launch the car at a higher RPM, where more torque and power are available. This can be especially important if other modifications (like larger cams) have reduced your low end power and torque. The Holeshot 2000 has a stall speed of 1900-2100 RPM (based on an engine producing 230 lb. ft. of torque at 2500 RPM), so it is best suited for mild performance applications, such as vehicles with minor engine modifications that don't produce more than 350 horsepower. In addition to better launch capability, the Holeshot also provides more strength. The impeller and turbine are furnace brazed, and many of the components are brand new, including the precision steel alloy pump drive tube, the heavy duty needle bearing between the stator and impeller (not a thrust washer), the turbine hub, and the springs and rollers in the stator. Please Note: High stall torque converters can build extra heat, so supplementary transmission cooling is recommended to avoid premature transmission failure. This converter should not be used with a transbrake, and on V-8's it retains the lockup feature, so it can be run as lockup or non-lockup.

  • Brand: B&M
  • ASIN: B000CIMN2I
  • UPC: 019695704179

ACDelco 24227792 GM Original Equipment Automatic Transmission Torque Converter Clutch Pulse Width Modulation Valve

ACDelco 24227792 GM Original Equipment Automatic Transmission Torque

ACDelco GM Original Equipment Automatic Transmission Control Solenoids are GM-recommended replacements for your vehicle’s original components. These solenoids are electro-hydraulic valves that help control the flow of fluid within the control valve body. They also help control clutch application pressure. These original equipment solenoids have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

  • Brand: ACDelco
  • ASIN: B000NW8FA2
  • UPC: 021625789460

ACDelco 24202535 GM Original Equipment Automatic Transmission Torque Converter Seal

ACDelco 24202535 GM Original Equipment Automatic Transmission Torque

ACDelco GM Original Equipment Automatic Transmission Torque Converter Seal is a GM-recommended replacement component for one or more of the following vehicle systems: automatic transmission/transaxle, and/or manual drivetrain and axles. This original equipment seal will provide the same performance, durability, and service life you expect from General Motors.

  • Brand: ACDelco
  • ASIN: B0013FDKOY
  • UPC: 036666475647

ACDelco 24205900 GM Original Equipment Automatic Transmission Torque Converter Housing Access Hole Cover

ACDelco 24205900 GM Original Equipment Automatic Transmission Torque

ACDelco GM Original Equipment Automatic Transmission Torque Converter Housing Plug is a GM-recommended replacement component for one or more of the following vehicle systems: automatic transmission/transaxle, and/or manual drivetrain and axles. This original equipment plug will provide the same performance, durability, and service life you expect from General Motors.

  • Brand: ACDelco
  • ASIN: B0016ISCUK
  • UPC: 021625288413

TORCO Allison 1000 2000 duramax AT1000 AT2000 6.6L - 8.1L HEAVY DUTY Torque Converter

TORCO Allison 1000 2000 duramax AT1000 AT2000 6.6L

Most DEPENDABLE converter you can buy at LOWEST price with over 27 years experience and over 99% satified customers. All units are remanufactured according to OEM specs or better. * Each part goes through 5-steps quality inspection * Each part is machined for smoothness & cleaness * We tig many of our converters as a standard procedure * All lockup surfaces are machined for smooth surface * All of our converters are pressure tested to prevent leaks * All of our converters are balanced for vibration * All of our converters are checked for runout * Finally, all of our converters are spin-checked using input shaft. We carry over 500 types of domestic and import torque converters to meet your needs.

  • Brand: Torco
  • ASIN: B07L2J62ZS

TRANS_ONE H18A Remanufactured HEAVY DUTY Torque Converter 1998 1999 2000 2001 2002 2003 2004 2005 HONDA Accord 3.0L B7XA BAYA MAYA

TRANS_ONE H18A Remanufactured HEAVY DUTY Torque Converter 1998

HEAVY DUTY Torque Converter for 1988 - 2005 Honda Accord 3.0L B7XA BAYA MAYA Transmission. For confirmation please provide your vehicle information, when you check out: Year , Make , Model , Engine Size , Transmission Type ? * Each part goes through 5-steps quality inspection. * Each part is machined for smoothness & cleanness. * We tig many of our converters as a standard procedure. * All lockup surfaces are machined for smooth surface. * All of our converters are pressure tested to prevent leaks. * All of our converters are balanced for vibration. * All of our converters are checked for runout. * Finally, all of our converters are spin-checked using input shaft. Torque converter fit and application is 100% the responsibility of buyer. If you have any doubts to your application, please message us before purchasing ! < High Stall Converter > Exact Stall Speed will depend on your vehicle's HP and Torque. Not for use with NOS or Blown Applications < Return policy > You can return within 30 days / uninstalled and resellable condition. < 1 year unlimited miles warranty > We warrant against defects in material and factory workmanship providing the proper installation methods are followed. This warranty is limited to the replacement of the torque unit purchased by you which fails durin...

  • Brand: TRANS_ONE
  • ASIN: B07HMMZ7X2

B&M 20416 Holeshot 2000 Torque Converter

B&M 20416 Holeshot 2000 Torque

Upgrading to a Holeshot torque converter with a higher stall speed can give you better acceleration from a dead stop. It allows the engine to launch the car at a higher RPM, where more torque and power are available. This can be especially important if other modifications (like larger cams) have reduced your low end power and torque. The Holeshot 2000 has a stall speed of 1900-2100 RPM (based on an engine producing 230 lb. ft. of torque at 2500 RPM), so it is best suited for mild performance applications, such as vehicles with minor engine modifications that don't produce more than 350 horsepower. In addition to better launch capability, the Holeshot also provides more strength. The impeller and turbine are furnace brazed, and many of the components are brand new, including the precision steel alloy pump drive tube, the heavy duty needle bearing between the stator and impeller (not a thrust washer), the turbine hub, and the springs and rollers in the stator. Please Note: High stall torque converters can build extra heat, so supplementary transmission cooling is recommended to avoid premature transmission failure. This converter should not be used with a transbrake, and it requires a small (10-3/4") bolt circle flexplate or dual pattern flexplate.

  • Brand: B&M
  • ASIN: B000CIKBVS
  • UPC: 019695204167
Similar 2000 Torque Converter Shopping Results