VIVO 4 Loop 1/2 inch Pex Manifold Stainless Steel Radiant Floor Heating Set | 4 Branch Kit (PEX-M12-4)

VIVO 4 Loop 1/2 inch Pex Manifold Stainless

PEX-M12-4 is a stainless steel 4 Loop Radiant Manifold kit from VIVO. Features include body flow meters with adjustable flow rates, isolation ball valve with 1" NPT thread made of high-quality brass forging, stem thermometers for both isolation ball valves, automatic air purge valves, ½" compression connectors, and mounting brackets. Each port is spaced 2" apart and has its own turn off valve. The entire manifold measures approximately 10" x 15" and has an approximate weight of 12lbs. PEX-M12-4 is commonly used for radiant floor heat systems and features easy installation. Complete kit as shown in the pictures provided (1 supply manifold, 1 return manifold, 4 flow meters, 8 adapters (1/2"), 2 isolation ball valves with 1" NPT and temperature gauges, 2 air vents, 2 drain valves, 1 heavy duty mounting bracket. Not suitable for potable water applications.

  • Brand: VIVO
  • ASIN: B011W54YL2
  • UPC: 641020645200

TargetEvo 4 Loop 1/2 PEX Manifold Stainless Steel Radiant Floor Heating Set Kit with Adjustable Flow Valves Automatic Air Vent

TargetEvo 4 Loop 1/2 PEX Manifold Stainless Steel

Test: 1.Open inlet and drain valve, the water in mainfold pipe enters the water distributor. Take off the red protective cap of flowmeter, then adjust flowrate. 2.Open automatic air vent, the air inside the water distributor will run out. 3.Test the system in running state to make sure there is no leak point. Test time should be 24 hours. (The pressure is under 1.0-1.2Mpa) 4.Check carefully to make sure there is no warer seepage or dripping in the connection point of each part. If there is any problem, please close the inlet and drain valve first.Then repair the pipe and test again. 5.The system test index can meet the requirement of user. Note: 1.The maximum pressure value of the system must under 1.2 Mpa. 2.Not suitable for drinking wate. Specification: Material: 304 stainless steel Color: silver The whole size of 4 loop: 15.7 x 13.7 inches The whole size of 6 loop: 18.9 x 13.7 inches Finish: Polishing & brush Installation: Bracket Work temperature: 33.8 F - 203 F Mainfold diameter: G 1"" (DN25) Branch pipe diameter: G1/2 - DN15£¨PEX Both ends of the main tread: G 1" Thread (Female) Working medium: water, vapor Branch interval: 50mm Applicable pressure: 1.5Mpa Mainfold trunk size: equivalent of DN40 Temperature control: 3mm Delivery: 1 * 304 stainless steel radiant floor h...

  • Color: 4 Loop
  • Brand: TargetEvo
  • ASIN: B0799D43Q9

PEX Manifold Radiant Floor Heating Set 5 Loop System Stainless Steel Heated Hydronic Heating 1/2" Oxygen Barrier Tubing

PEX Manifold Radiant Floor Heating Set 5 Loop

The Heart of your Heating SystemRadiant Heat manifolds play a large part in heating systems. It allows for even distribution of supply water from the heat source to distribution lines that circulate hot water through the entire system. They can be used in a variety of applications ranging from radiant, hydronic, or snow-melt applications. The systems are made of adapters, end caps, and fittings that can be customized in a manifold depending on the application. A well-made manifold should distribute water efficiently and economically when the PEX tubing is sized properly. PEX manifolds reduce the need for soldering copper pipes, which prevents flames and chemicals getting into water lines causing problems. A Radiant PEX Manifold set can cover a large area depending on the branch. A 2-branch Radiant PEX Manifold Set can cover a maximum of 800 square feet to an 8-branch that can cover 1800-2200 square foot of floor.Our Radiant Floor Heating Manifold Set comes complete with:(1)- Manifold balance section Body with flow meters(1)- Manifold Isolation section Body with valves(2)- Mounting brackets (2)- Manifold Isolation ball valve with 1" (inch) NPT Pipe Connection(2)- Stem thermometer on each Manifold Isolation ball valve(2)- Manifold end capsAlso includes 1/2" Compression connectors-(...

  • Brand: CMI
  • ASIN: B075LXTZ1F
  • UPC: 847877050246

4 LOOP/BRANCH 1/2" PEX MANIFOLD WITH BALL VALVE STAINLESS STEEL RADIANT HEATING

4 LOOP/BRANCH 1/2" PEX MANIFOLD WITH BALL VALVE

4 - Loop Stainless Steel Radiant Manifold, Made of High Quality Stainless Steel

  • Brand: Fitting Stores
  • ASIN: B07CQ66ZLZ

6 LOOP/BRANCH 1/2" PEX MANIFOLD STAINLESS STEEL RADIANT FLOOR HEATING SET/KIT

6 LOOP/BRANCH 1/2" PEX MANIFOLD STAINLESS STEEL RADIANT

6 - Loop Stainless Steel Radiant Manifold, Made of High Quality Stainless Steel

  • Brand: Build Zone
  • ASIN: B01M9AA4QE

3 LOOP/BRANCH 1/2" PEX MANIFOLD STAINLESS STEEL RADIANT FLOOR HEATING SET/KIT

3 LOOP/BRANCH 1/2" PEX MANIFOLD STAINLESS STEEL RADIANT

3 - Loop Stainless Steel Radiant Manifold, Made of High Quality Stainless Steel

  • Brand: Build Zone
  • ASIN: B01N6XAKZO

4 LOOP/BRANCH 1/2" PEX MANIFOLD WITH BALL VALVE STAINLESS STEEL RADIANT HEATING

4 LOOP/BRANCH 1/2" PEX MANIFOLD WITH BALL VALVE

4 - Loop Stainless Steel Radiant Manifold, Made of High Quality Stainless Steel

  • Brand: Fitting Stores
  • ASIN: B07C83MDKK

4-Loop/Port Ball Valve Brass Pex Manifold for 1/2"" Pex Tubing w/brackets

4-Loop/Port Ball Valve Brass Pex Manifold for 1/2""

4 Loop/Port Ball Valve Manifold set is for Radiant Heating Only, 1"" NPT thread on inlet with 1/2"" pex outlets. This set includes: Isolation 4 port manifold with ball valves (supply - red handle); Isolation 4 port manifold with ball valves (return - blue handle); (8 pcs.) Connector cores for pex, pex-al-pex pipes with double O-rings; (2 pcs.) Manifold Brackets.

  • Color: Silver
  • Brand: Fitting Stores
  • ASIN: B07CRMSVK2

BestEquip Radiant Floor Manifold 4 Loop Radiant Floor Heating Set 4 Branch Radiant Floor Heating Kit 1/2inch PEX Tubing for Heat Stainless Steel

BestEquip Radiant Floor Manifold 4 Loop Radiant Floor

Radiant Floor Heating PEX tubing for heat 1/2inch radiant floor heating manifold Set Stainless Steel IntroductionRadiant Floor Heating has been designed engineered to offset the manifold from the mounting surface for easy access and installation of PEX tubing.Installs quickly and easilySpecification No. of PEX outlets: 8 (4 on the Supply PEX manifold + 4 on the Return PEX manifold) For use with PEX tubing sizes: Inner diameter 1/2 ", outer diameter 5/8" Manifold trunk size: 1-1/4" Valve inlet connections: 1" NPT Overall width (with valves): 15.5" Overall height: 14" Overall depth: 4" (will fit inside a 2x4 frame wall) Distance between PEX branches (on center): 2" Max. flow per individual branch: 1.4 GPM

  • Color: 4 Loop
  • Brand: BestEquip
  • ASIN: B06XNWDH36

SharkBite 22996LF Manifold, 1-Inch by 3/4-Inch

SharkBite 22996LF Manifold, 1-Inch by

The Shark Bite manifolds combine Shark Bite push-fit technology with the value-added advantages of a manifold. The Shark Bite manifolds are designed to simplify manifold and pipe installation in copper, cpvc, and PEX potable water or hydronic heating system. Just insert the pipe and the stainless steel teeth bite down and grip tight - creating a water tight joint.

  • Brand: SharkBite
  • ASIN: B007AGJRTW
  • UPC: 697285606821

4 Loop Stainless Steel Premium PEX Manifold With 1/2" Connectors for Radiant Heating - PEX GUY (4 Loops)

4 Loop Stainless Steel Premium PEX Manifold With

This 4 loop manifold is produced with high quality stainless steel. It comes complete with 1/2" PEX compression fittings so you will not need any additional PEX tools to fasten the PEX loops to the manifold. All you need is an adjustable wrench to secure the compression fittings. If you are looking for a different type or a manifold with different loops, you can view our different options in the Radiant Heating Manifolds section of the store.

  • Brand: PEX GUY
  • ASIN: B01F9LVPCQ

11 LOOP/BRANCH 1/2" STAINLESS STEEL PEX MANIFOLD with BALL VALVEs and 4 WIRE ACTUATORS for RADIANT HEATING

11 LOOP/BRANCH 1/2" STAINLESS STEEL PEX MANIFOLD with

Stainless Steel Manifold set for Radiant Heat includes supply manifold w/ balancing valve and flow meter, return manifold w/ valves (ready for actuators), swivel fill/drain valve on both supply and return side, adapters for 1/2" PEX, temperature gauges, flow meters, 4 wire actuators.

  • Brand: Fitting Stores
  • ASIN: B07GL2GRQS

6 LOOP/BRANCH 1/2" STAINLESS STEEL PEX MANIFOLD with BALL VALVEs and 4 WIRE ACTUATORS for RADIANT HEATING

6 LOOP/BRANCH 1/2" STAINLESS STEEL PEX MANIFOLD with

Stainless Steel Manifold set for Radiant Heat includes supply manifold w/ balancing valve and flow meter, return manifold w/ valves (ready for actuators), swivel fill/drain valve on both supply and return side, adapters for 1/2" PEX, temperature gauges, flow meters, 4 wire actuators.

  • Brand: Fitting Stores
  • ASIN: B07GL539MM

Radiant Manifold: 2 Loop with Compatible Outlets (1/2" or 3/4" Adapters/Connecters Included)

Radiant Manifold: 2 Loop with Compatible Outlets (1/2"

This product provide a central control for hot and cold water that feeds flexible PEX supply lines to individual fixtures. AB radiant PEX manifold allows you to monitor the water's temperature and flow rate, set up automatic flow controls, drain the system, and more. This particular model is made of brass 57-3, has nickel-plating on the ball valve and air vent valve, and has 1" supply/return ports and 1/2" branch ports (can be converted to 3/4" by using adapters). This product has a 5 year warranty against manufacturer's defects.Product Features and UsageTemperature Gauge, displaying both Fahrenheit (120F) and Celsius (80C) for your convenience 1 extra cap on both drain valves can be used to put an outlet on standbyManual valves allow adjustment of flow rateShut-off valves on both supply and return outletsDrain valve can be used as an extra plumbing outletZone valve can be used to control different zones Air vent valve for purging air during the water filling process.Specifications of PEX Manifold Loops/Ways: 2 Flow Rate: Up to 1.6 GPM Connection Size (Supply / Branch): 1" NPT / 1/2" NPT Branch Outlet-Outlet Distance: 1.96" Materials: 57-3 Brass, Nickel (plating for valves)

  • Brand: ALFA HEAT
  • ASIN: B07M9WPHB8

4 loop 1" Stainless Steel Pex Manifold for Radiant Floor Heating

4 loop 1" Stainless Steel Pex Manifold for

PEX plumbing manifolds are a new method for residential water distribution, gaining acceptance in the home building industry. Manifold plumbing systems are control centers for hot and cold water that feed flexible PEX supply lines to individual fixtures.

  • Color: Silver
  • Brand: DMNI
  • ASIN: B07DNJWWWL

4 Loop 1/2" Pex Manifold, INCLUDES Temp. Gauges, Flow Meters, Shut-offs, Pressure Temp gauges and Auto Air Purger

4 Loop 1/2" Pex Manifold, INCLUDES Temp. Gauges,

HERE IS THE DEAL OF THE CENTURY for 1/2 inch in floor pex tubing YOU ARE BUYING A 4 LOOP IN-FLOOR HEAT MANIFOLD AS SHOWN WITH 2 TEMP GAUGES ONE FOR THE HOT AND ONE FOR RETURN, FLOW METERS ON EACH OF THE 4 RUNS, EACH 1/2 INCH PORT HAS ITS OWN SHUT OFF BUILT IN. PRESSURE TEMP GAUGES AND AUTO AIR PURGER OTHERS CHARGE FOR THESE ITEMS BUT WITH US THEY ARE STANDARD. EACH PORT ON THE ENDS HAVE SHUT OFF VALVES AT NO CHARGE INCLUDED AS WELL. NICKEL PLATED WITH FULL NO CHARGE MOUNTING BRACKET AS WELL. NOTE THE WHITE CAPS ARE TO INSTALL ZONE ACTUATORS WITH SPEED AND EASE. EACH LOOP HAS STANDARD QUICK CONNECT FITTINGS INCLUDE TO HOOK UP YOU IN-FLOOR HEAT PEX WITHOUT TOOLS

  • Brand: American Royal
  • ASIN: B015D6ZWTE

4 - Loop/Port Ball Valve Brass Manifold for 1/2" Pex Radiant

4 - Loop/Port Ball Valve Brass Manifold for

4 - Loop/Port Ball Valve Brass Manifold for 1/2" Pex w/Manifold Brackets

  • Brand: Build Zone
  • ASIN: B01N6ZW1US

Mophorn Radiant Floor Manifold Set 4 Loop 1/2 Inch PEX Manifold Kit Stainless Steel 4 Branch Radiant Floor Heating Manifold Automatic Air Vent Manifold for 1/2" PEX Tubing (4 Loop)

Mophorn Radiant Floor Manifold Set 4 Loop 1/2

4 Branch PEX Manifold Radiant Floor Heating Set Stainless Steel This PEX Manifold is a stainless steel 4 Loop Radiant Manifold kit Features include body flow meters with adjustable flow rates, isolation ball valve with 1" NPT thread made of high-quality brass forging, stem thermometers for both isolation ball valves, automatic air purge valves, 1/2" compression connectors, and mounting brackets. Each port is spaced 2" apart and has its own turn off valve. Tech Date: No. of PEX outlets: 8 (4 on the Supply PEX manifold + 4 on the Return PEX manifold); For use with PEX tubing sizes: 3/8", 1/2" & 5/8"; Manifold trunk size: 1-1/4"; Valve inlet connections: 1" NPT; Distance between PEX branches (on center): 2"; Max. flow per individual branch: 1.4 GPM; Overall width (with valves): 15.5"; Overall height: 14"; Overall depth: 4" (will fit inside a 2x4 frame wall); Features Supply PEX manifold with (4) PEX tubing outlets and (4) adjustable flow meters; Return PEX manifold with (4) PEX tubing outlets and (4) balancing (flow adjustment) valves: Isolation ball valves with 1" NPT connections and pressure gauges; Automatic air vent (air eliminator):Float type air vent is used to automatically purge the air out of the radiant heat system. Air vent cap is included for pressure testing purposes Dr...

  • Color: 4 Loop
  • Brand: Mophorn
  • ASIN: B01N9J6771
  • UPC: 712166607305

SharkBite 24931 4-Port Radiant Manifold, Stainless Steel

SharkBite 24931 4-Port Radiant Manifold, Stainless

The SharkBite four-loop radiant heating manifold is designed to optimally distribute heating fluid throughout circuits in a closed-loop heating system. The manifold ensures flow to each circuit is precisely regulated, and it also controls the shutoff, venting of air from the system. The fluid is heated by a water heater or boiler and distributed by the manifold throughout the different PEX tubing circuits. The manifold has a 1-inch FNPT inlet and features integrated 1/2-inch SharkBite connections on the loop ports. The SharkBite connections make connecting the loops to the manifolds significantly easier and faster than alternative connection methods.

  • Color: Stainless Steel
  • Brand: SharkBite
  • ASIN: B01AY1D7LI
  • UPC: 697285249318

10-Loop/Port Ball Valve Brass Pex Manifold for 1/2" Pex Tubing w/brackets

10-Loop/Port Ball Valve Brass Pex Manifold for 1/2"

10 Loop/Port Ball Valve Manifold set is for Radiant Heating Only, 1"" NPT thread on inlet with 1/2"" pex outlets. This set includes: Isolation 5 port and 4 port manifold with ball valves (supply - red handle); Isolation 5 port and 4 port manifold with ball valves (return - blue handle); (20 pcs.) Connector cores for pex, pex-al-pex pipes with double O-rings; (2 pcs.) Manifold Brackets.

  • Color: Silver
  • Brand: Fitting Stores
  • ASIN: B07CRQG5WC

8 LOOP/BRANCH 1/2" STAINLESS STEEL PEX MANIFOLD with BALL VALVEs and 4 WIRE ACTUATORS for RADIANT HEATING

8 LOOP/BRANCH 1/2" STAINLESS STEEL PEX MANIFOLD with

Stainless Steel Manifold set for Radiant Heat includes supply manifold w/ balancing valve and flow meter, return manifold w/ valves (ready for actuators), swivel fill/drain valve on both supply and return side, adapters for 1/2" PEX, temperature gauges, flow meters, 4 wire actuators.

  • Brand: Fitting Stores
  • ASIN: B07GLN32SL

10 LOOP/BRANCH 1/2" STAINLESS STEEL PEX MANIFOLD with BALL VALVEs and 4 WIRE ACTUATORS for RADIANT HEATING

10 LOOP/BRANCH 1/2" STAINLESS STEEL PEX MANIFOLD with

Stainless Steel Manifold set for Radiant Heat includes supply manifold w/ balancing valve and flow meter, return manifold w/ valves (ready for actuators), swivel fill/drain valve on both supply and return side, adapters for 1/2" PEX, temperature gauges, flow meters, 4 wire actuators.

  • Brand: Fitting Stores
  • ASIN: B07GL3PS2Z

12 LOOP/BRANCH 1/2" STAINLESS STEEL PEX MANIFOLD with BALL VALVEs and 4 WIRE ACTUATORS for RADIANT HEATING

12 LOOP/BRANCH 1/2" STAINLESS STEEL PEX MANIFOLD with

Stainless Steel Manifold set for Radiant Heat includes supply manifold w/ balancing valve and flow meter, return manifold w/ valves (ready for actuators), swivel fill/drain valve on both supply and return side, adapters for 1/2" PEX, temperature gauges, flow meters, 4 wire actuators.

  • Brand: Fitting Stores
  • ASIN: B07GL1Y4X3

1" 2-Loop/Port Ball Valve Brass Pex Manifold for 1/2" Pex Tubing

1" 2-Loop/Port Ball Valve Brass Pex Manifold for

2 Loop/Port Ball Valve Manifold set is for Radiant Heating Only, 1" NPT thread on inlet with 1/2" pex outlets. 2 -12 ports Manifold are in stock in our store.

  • Brand: Build Zone
  • ASIN: B0753MFV3K
  • UPC: 688949500609

2 - Loop/Port Ball Valve Brass Manifold for 1/2" Pex Radiant

2 - Loop/Port Ball Valve Brass Manifold for

4 Loop/Port Ball Valve Manifold set is for Radiant Heating Only, 3/4" NPT thread on inlet with 1/2" pex outlets. 2 -12 ports Manifold are in stock in our store.

  • Brand: Build Zone
  • ASIN: B01N817LQV

9 LOOP/BRANCH 1/2" PEX MANIFOLD STAINLESS STEEL RADIANT FLOOR HEATING SET/KIT

9 LOOP/BRANCH 1/2" PEX MANIFOLD STAINLESS STEEL RADIANT

9 - Loop Stainless Steel Radiant Manifold, Made of High Quality Stainless Steel

  • Brand: Build Zone
  • ASIN: B01MAVVK8W

12-Loop/Port Ball Valve Brass Pex Manifold for 1/2" Pex Tubing w/brackets

12-Loop/Port Ball Valve Brass Pex Manifold for 1/2"

12 Loop/Port Ball Valve Manifold set is for Radiant Heating Only, 1" NPT thread on inlet with 1/2" pex outlets. 2 -12 ports Manifold are in stock in our store.

  • Brand: Build Zone
  • ASIN: B0753VHX2P
  • UPC: 688949500807

1" 7-Loop/Port Ball Valve Brass Pex Manifold for 1/2" Pex Tubing w/brackets

1" 7-Loop/Port Ball Valve Brass Pex Manifold for

7 Loop/Port Ball Valve Manifold set is for Radiant Heating Only, 1" NPT thread on inlet with 1/2" pex outlets. 2 -12 ports Manifold are in stock in our store.

  • Brand: Build Zone
  • ASIN: B0753MCVY9
  • UPC: 688949500708

1" 11-Loop/Port Ball Valve Brass Pex Manifold for 1/2" Pex Tubing w/brackets

1" 11-Loop/Port Ball Valve Brass Pex Manifold for

11 Loop/Port Ball Valve Manifold set is for Radiant Heating Only, 1" NPT thread on inlet with 1/2" pex outlets. 2 -12 ports Manifold are in stock in our store.

  • Brand: Build Zone
  • ASIN: B0754256LM
  • UPC: 688949500784

1" 10-Loop/Port Ball Valve Brass Pex Manifold for 1/2" Pex Tubing w/brackets

1" 10-Loop/Port Ball Valve Brass Pex Manifold for

10 Loop/Port Ball Valve Manifold set is for Radiant Heating Only, 1" NPT thread on inlet with 1/2" pex outlets. 2 -12 ports Manifold are in stock in our store.

  • Brand: Build Zone
  • ASIN: B0753K8CL7
  • UPC: 688949500760
Similar 4 Loop Radiant Heat Manifold Shopping Results