Mophorn Tool Cart 30 Taper Tool Holder CNC Tool Cart 50 Capacity CAT30 BT30 Service Carts with Wheels Heavy Duty (BT30 50 Capacity)

Mophorn Tool Cart 30 Taper Tool Holder CNC

CAT30 BT30 NMTB30 Heavy Duty CNC Tool Tool Cart Shelf Capacity 50 Introduction: BT30 is designed for all CAT, BT, NT, NMTB,ISO #30 taper. Tooling capacity is 50 tools for BT30, 50 tools CAT30.Tooling racks may be positioned either horizontally or at an angle. It could be equiped with 4 wheels (2 locking) for ease of transportation. It's suitable for factory processing center workshop, warehouse handling, storage knife, protection of all kinds of knives, handling convenient, safe and centralized management, access to facilitate and improve efficiency. Specifications Color: White Item Type: BT30 Type: Tool holder Material: Steel Type of construction: Welded Applicable machine tools: Lathe Whether the coating: Coating Product size: 860x435x800mm(33.86"x17.13"x31.50") Number of tool holder:50 (BT30) Package Content 1xMain Unit 50xTool Holders Several Related Accessories

  • Color: BT30 50 Capacity
  • Brand: Mophorn
  • ASIN: B01N4EGTYE
  • UPC: 712166607244

Huot ToolScoot Cart for 50 Taper Toolholders

Huot ToolScoot Cart for 50 Taper

The Huot ToolScoot Cart for 50 Taper Toolholders has two storage shelves with compartments to hold 36 CNC 50 Taper toolholders including BT, CAT "V" Flange, and NMTB, and is made in USA. The lower shelf is angled for access to tools from either side. The cart is made of steel with an epoxy finish for durability and protection and has interlocking solid side panels and 5" casters load rated at 1,000 lb. for stability and strength. The cart is 35.25 × 35 x 18 inches (H x W x D). (H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.)Cutting tool organizers provide storage, organization, and quick size identification for drill bits, taps, and reamers. Organizer types include gauges, indexes (also called cases), dispenser cabinets, carts, towers, racks, and platforms.Huot manufactures cutting tool storage systems. The company, founded in 1926 and headquartered in St. Paul, MN, meets International Organization for Standardization (ISO) standard 9001.

  • Brand: Huot Manufacturing
  • ASIN: B00018A22C
  • UPC: 033603139501

MulWark 9pc Best Bolt Catch Roll Pin Punch Set | Firearm Assembly Gunsmithing Kit-Corrosion Resistant Assorted Hand Pin Remover Tool with Holder for Automotive, Gunsmith, Watch Repair, Jewelry, Craft

MulWark 9pc Best Bolt Catch Roll Pin Punch

MulWark 9 in 1 roll pin punch set are the safest and easiest tool to remove and re-use roll or spring pins without causing glaring damage to the pins. With these pins becoming so common, having the right punches to remove them is absolutely necessary. This roll pin punch set features:★ Long-term Durability⦁ Each punch is made of chrome-vanadium steel (hardness up to 48-56 HRC), which prevents rounding of the punch and prolongs the punch life⦁ Its black oxide steel finish gives strong resistance to corrosion, abrasion or glaring damage★ Best Punch Performance ⦁ These have little bump on the end, making it line up on the roll pin for a nice easy removal or installment of the roll pin, and the rounded, plastic tip makes sure it won't cause scratches or deform the pins⦁ The punch tips have a reverse-taper design making them slightly wider than the rest of the shaft so they won't stick in pin holes★ Key Value:MulWark applies selected materials and special finishing & craftsmanship to these punches, in order to achieve the most proper hardness, avoiding easily bending or the opposite, easily breaking.★ What Is Inside the Package:⦁ 1-pc. 1/16" X 2 3/4"⦁ 1-pc. 5/64" X 3 1/4"⦁ 1-pc. 3/32" X 3 1/2"⦁ 1-pc. 1/8" X 4"⦁ 1-pc. 5/32" X 4 1/2"⦁ 1-pc. 3/16" X 4 3/4"⦁ ...

  • Brand: MulWark
  • ASIN: B01N1HXR7A
  • UPC: 736649537422

FTVOGUE Taper Collet Chuck Holder Face Milling Arbor Adapter CNC Milling Tools MT2 ER16 50 M10

FTVOGUE Taper Collet Chuck Holder Face Milling Arbor

Features: The surface is quite smooth which offers a comfortable feeling and nice appearance.  The hardness and endurance of the surface are improved.  Antirust precision ground and hand inspected.  This MT2 holder has better cleanness and more stable accuracy.  It is well packed in a container which will protect holder from damage. This MT2 holder is suitable for all ER16 collets. Mainly used on milling machine, drilling machine, lathe, small machine tools. Specifications: Material: Carbon steel Type: ER16 MT2 M10 Thread Outer Diameter: M10 Nut Outer Diameter: 28mm Clamp Capacity: 1mm-10mm Quantity: 1pc Package Includes: 1 x MT2 Holder

  • Brand: FTVOGUE
  • ASIN: B07RWP95WL
  • UPC: 749249354030

50mm 2 Inches Lathe Boring Head Taper Collet Chuck Milling Holder for MT2 with 3 Hex Shank Wrenches

50mm 2 Inches Lathe Boring Head Taper Collet

Specification: Material: High-carbon steel Type: Milling tools Weight: 1189g Note: Due to the manual measurement, there might be some error. Package Includes: 1 x MT2 Taper Hold and Boring Head 3 x Hex Keys

  • Brand: Wal front
  • ASIN: B07K7N5PZC
  • UPC: 757686990322

Techniks 00153 50 Taper Tool Holder Spindle Adapter

Techniks 00153 50 Taper Tool Holder Spindle

50 taper

  • Brand: Techniks
  • ASIN: B001PV1DFY
  • UPC: 003311000035

AccOED Face Mill Holder MT3-FMB22 M12 Combi Shell End Mill Arbor Morse Taper Tool Holder For Milling Cutter 138mm

AccOED Face Mill Holder MT3-FMB22 M12 Combi Shell

Specifications Material: Steel Drawbar-Thread: M12 Holder end thread : M12 Total Length: 138mm Connect milling arbor slot : 22mm Features Surface more smooth, feel comfortable, appearance nice. Improve the hardness and endurance of the surface. Antitrust Precision ground and hand inspected. Cleanness better, accuracy stable. Used for plate cutting , Hardenless insert used for Steel meterial . Packing Included 1 x MT3-FMB22-M12 Morse Taper

  • Color: silver
  • Brand: AccOED
  • ASIN: B072QVYQQ3
  • UPC: 756320503003

GunVault GVB2000 Multivault Biomtrc 10X8X14, Multi Vault

GunVault GVB2000 Multivault Biomtrc 10X8X14, Multi

Gun Vault pistol safes are truly premium products that set the standard for the rest of the industry. EWe know that security and reliability are prevailing priorities when you need our products, and that's why Gun Vault pistol safes have the features you Our Biometric scanner provides lightning-quick access, even in the dark. Improved high strength lock mechanism and precise fittings make it virtually impossible to pry open with hand tools. Battery powered for maximum security and easy portability. The Biometric (GVB 2000) uses fingerprint recognition, to access the safe contents. A high-performance algorithm is used to achieve speedy identification of enrolled fingerprints; and at the same time has a very low False Reject rate (FRR) for a given False Accept Rate (FAR). This self-learning algorithm of the Gun Vault Bio adds new minutiae to the fingerprint templates each time a user touches the finger print scanner, which decreases the likelihood of FRR, updates slight changes that might occur over time to an enrolled fingerprint, as well as to help distinguish variations. The GVB2000 can handle a maximum of 15 fingerprint templates. E The GVB2000 also comes with an AC/DC Power Adapter, and an interior courtesy light.

  • Color: black
  • Brand: GunVault
  • ASIN: B001ABJZFO
  • UPC: 091131397671

Molded Tool Holder, 50 Taper, Plastic

Molded Tool Holder, 50 Taper,

Molded Tool Holder, 50 Taper, PlasticFeatues - Features -

  • Brand: GRAINGER APPROVED
  • ASIN: B07PGJCHMN

GearWrench 75PC 3887 Ratcheting Tap and Die Drive Tool Set SAE/Metric

GearWrench 75PC 3887 Ratcheting Tap and Die Drive

  • Color: silver
  • Brand: GearWrench
  • ASIN: B000HBDW48
  • UPC: 735090742393

Capri Tools 21000 Honda Crank Pulley Removal Tool

Capri Tools 21000 Honda Crank Pulley Removal

This Capri Tools Honda crank pulley removal tool allows for easy loosening or tightening the crank pulley bolt in most Honda or Acura engines by preventing the engine from turning. Features a professional grade 50 mm socket compatible with 1/2-inch drive breaker bar. Constructed with hardened Chrome-Molybdenum steel alloy for maximum strength. Extremely durable and compact for access to tight engine spaces. Backed by a lifetime replacement guarantee.

  • Color: Black
  • Brand: Capri Tools
  • ASIN: B00I3RLMIG
  • UPC: 886352210003

Proxxon 28600 Micromot Drill Stand MB 200

Proxxon 28600 Micromot Drill Stand MB

Proxxon 28600 Micromot drill stand MB200 for use with Proxxon's 28510, 28500, 28512 rotary tools. Head and dovetail guides can be tilted through 90 degrees. Enables beveled drilling and versatile milling operations. Geared rack and pinion feed with return spring allowing effortless and sensitive operation. Practical drill depth scale with adjustable limit stop with maximum travel of 1-1/2-Inches or 40 millimeters. With standard 4/5-Inch collar for Micromot drilling and milling devices. Has solid, hard chrom8um plated steel column 11-Inch x 4/5-Inches throat capacity column inside to center of tool is 5-1/2-Inches . Plane-milled table 8-11/16-Inches x 4-3/4-Inches with parallel limit stop and scale. Drilled and tapped holes for securing the table and holes to fix the drill stand itself are also provided.

  • Color: Green
  • Brand: Proxxon
  • ASIN: B00934X6BO
  • UPC: 799665027735

ERICKSON TOOL CAT50 MT4 C-123696 4MT 50V Morse Taper #4 Tool Holder CNC Machine

ERICKSON TOOL CAT50 MT4 C-123696 4MT 50V Morse

YOU ARE PURCHASING THE PICTUREDTOOL HOLDER.SOLD BY M & J TOOLING LLCDAYTON, OHIOPRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION: USEDSIZE / LABELING: C - 123696 4 MT 50VMANUFACTURER / BRAND:ERICKSON TOOLTHANK YOU FOR YOUR BUSINESS!LOCATION:BR32-78

  • Brand: ERICKSON TOOL
  • ASIN: B07T43PDKM

Mophorn Boring Head 2'' R8 Shank Holder Boring Head Set with 1/2'' Indexable Boring Bars 13 PCS Carbide Boring Head Tool Set

Mophorn Boring Head 2'' R8 Shank Holder Boring

2 Inch Boring Head R8 Shank Holder with Nine 1/2" Boring Bar 2 inch boring head with R8 shank. This tool set includes 13 pieces of accessories including boring bars and hex wrenches. They are main accessories of boring and CNC milling machine tools including coordinate boring machine, horizontal boring machine, ordinary boring. Providing quick and efficient working process. Feature: Boring Head 2 inch head with 5/8" (16 mm) offset. Maximum outer diameter: 50 mm (2"). Inner bore: 12 mm (1/2"). Scope of boring: 10-125 mm (0.39"-4.9"). Direct Reading Scale Provides 0.001" direct reading accuracy. Scale easily adjustable from 0 to 50. Intuitive and clear. Durable Material Full high quality steel construction with high strength and hardness. Good wear resistance, durable in use. Wide Application Main accessories of boring and CNC milling machine tools including coordinate, horizontal and ordinary boring machines. Full Kit 1 x 2" Boring head, 1 x R8 handle, 9 x 1/2" boring bars, 3 x hex wrenches, perfect for milling machines. Easy Portable A portable plastic tool box provides protection for boring head, bars and accessories, keep them clean and tidy. Specification: Material: High quality steel Head Size: 2" (50 mm) Boring Bar Hole: 1/2" (12 mm) Cross Hole Diameter: 1/2" (12 mm) Maximu...

  • Color: 2" Boring Head 13 PCS Set
  • Brand: Mophorn
  • ASIN: B07KY9GYVK
  • UPC: 601707182008

BoardMate - Drywall Fitting Tool, Supports The Board In Place While Installing

BoardMate - Drywall Fitting Tool, Supports The Board

Frequently Asked Questions Q. Do I get 2 BoardMates? A. Yes, they are sold as a pair (2 units per set) Q. What thickness of board is BoardMate suitable for? A. Any. Q. What is the working life of BoardMate? A. Boardmate is made of non-wearing ABS Plastic, designed to last forever. BoardMates Are sold as a set of 2. Manufactured of Pro Grade ABS Plastic. Designed to last forever. Come with a lifetime warranty. A Full Money Back Guarantee if dissatisfied for any reason.

  • Color: Red
  • Brand: BoardMate
  • ASIN: B00PH72GI0

Katzco Electrical Fish Tape Reel - 50 Feet Reach - Impact Case for Electricians, Pull Communication Wire Cable Line from Drywall, Ceiling, Under Rug Conduit or Pipe - 1/2-Inch W x 1/16-Inch Thick

Katzco Electrical Fish Tape Reel - 50 Feet

Katzco - Electrician's Fish Tape Reel50 Foot Reach High Impact Case - Design For Electric or Communication Wire Cable Line Puller Tape is ?" W x 1/16" ThickProduct descriptionLooking to route cables and pull wires but don't want to buy an expensive product?Look no further than here! Katzco's heavy duty electrical wire snake reel is the solution for you.While less expensive than other brands, This product provides superior quality.Tape is 1/8'' W x 1/16'' thick x 50 feet long.The case and handle are extremely durable and offer the maximum quality in shock and impact resistance.The inner ring design provides a smooth, consistent and comfortable surface for winding and rewinding and allows for more accurate use. The retractable fishing reel ensures it is tangle-free. The unique sloped handle optimizes the position of your hand for quick hand-over-hand rewinds and allows a more level payout of tape on the backswing while feeding conduit. It also stores excess tape.The handle gives you firm grip when pulling the wire.The convenience, quality and ease of use of this product is unmatched! Buy one today!

  • Color: Fish Tape
  • Brand: Katzco
  • ASIN: B01BGZ9TM2
  • UPC: 743841484942

OrangeA 2Pcs CAT50 Tool Holder ER16 Collet Chuck Set length 4"/100mm Chuck Tool Holder Set Mill Holder for CNC Engraving Machine Milling Lathe(2PCs CAT50-ER16-100)

OrangeA 2Pcs CAT50 Tool Holder ER16 Collet Chuck

2Pcs CAT50 Tool Holder ER16 Collet Chuck Set length 4"/100mm CAT50 ER16 Chuck, fit for Drilling Machine, Milling Machine CNC Chuck or Holder, is widely used in industries. Gage or projection length of ER16 is 4"/100mm. It is hardened and ground to ensure maximum accuracy in 0.0001-0.0002". Our chuck is fully ground flange and V-groove-easy on tool changers for less spindle and changer maintenance. V-Flange CAT 50 is production balanced to high speed spindle turning and meet industrial standard. Coolant through and Anti Rust design makes it perfect! Feature 100% brand new 2 Pcs CA50 high precision ER16 Collet Chuck Coolant through and Anti Rust design Hardened and ground to ensure maximum accuracy Fully ground flange and V-groove-easy on tool changers for less spindle Collet CHUCK Set fit for Drilling Machine ,Milling Machine CNC Chuck or Holder Specifications Condition: Brand New Type: CAT50 ER16 RPM: 25000 Material: 50CrMnTi Accuracy in 0.0001-0.0002" Collet chuck with projection length is 4"/100mm High Speed Balanced Chuck meets industrial standard Shipping Weight:7.4KG (16.4LBS ) Shipping Dimension: 34x22x14cm (13.4x8.6x5.5")

  • Color: 2PCs CAT50-ER16-100
  • Brand: OrangeA
  • ASIN: B079YZ8MBV
  • UPC: 601707112296

1 piece MT4 FMB22 M16 MT3 FMB22 M12 MT2 FMB22 M10+BAP300R 50-22-4T Taper Tool Holder CNC Milling Machine

1 piece MT4 FMB22 M16 MT3 FMB22 M12

Model Number: MT BAP300R 50 Application: Milling Cutter

  • Brand: ONE FIVE DAY
  • ASIN: B07RYNGW9R
  • UPC: 304363695744

VEVOR BT50 CNC Tool Cart White Color CNC Tool Cart Trolley 32 Capacity CNC Tool Holder Cart with Coating Protection (White)

VEVOR BT50 CNC Tool Cart White Color CNC

BT50 CNC Tool Cart White CNC Tool Cart Trolley Tooling trolley is suitable for BT50, Tooling capacity is 28 tools for BT50. Tooling racks may be positioned either horizontally or at an angle. It is equipped with 4 wheels (2 locking) for ease of transportation. It's suitable for factory processing center workshop, warehouse handling, storage knife, protection of all kinds of knives, handling convenient, safe and centralized management, access to facilitate and improve efficiency. Tool sets are made of ABS material, anti-oil and anti-skid. Different sets of tools can be placed in pairs, free to be matched. NOTE This tool cart is also suitable for BT30.BT40.HSK63,HSK80, but you need to buy and replace the red inserts by yourself in order to hold tool BT30.BT40.HSK63,HSK80. Feature: Holds 28 BT50 tool 2 Storage trays with protective lining inside New extra tray supports for better stability Durable ABS inserts to help prevent tool damage Heavy duty 4" casters load rated at 660lbs Keeps tools cleaner than open end carts Solid side panels for maximum strength & stability Specification: Color: White Suitable Type: BT50 Type: Tool holder Material: Iron Type of construction: Welded Applicable machine tools: Lathe Whether the coating: Coating Weight: About 30kg(66lbs) Product size: 980 ...

  • Color: White
  • Brand: VEVOR
  • ASIN: B07F67PGQT
  • UPC: 601707110766

TURN RAISE Decorative Flameless Candles, White Taper LED Window Candles with Timer and Remote Control, Battery Operated Candles for Seasonal & Festival Celebration (Batteries not Included)-Set of 6

TURN RAISE Decorative Flameless Candles, White Taper LED

TURN RAISE Decorative Flameless Candles, White Taper LED Window Candles with Timer and Remote Control, Battery Operated Candles for Seasonal & Festival Celebration (Batteries not Included)-Set of 6Specifications:Material: Plastic and ABSSize: 6.9" x 0.8"Diameter: 2cm/0.8"LED Color: Warm whiteTimer: 2/4/6/8 hours Flash Mode: Static light or flickering light Brightness: Increase or decrease Battery: 2 x AA battery (not included)Remote Distance: 5mRemote Battery: 1-CR2025 (included)Package Included: 6 x LED Electric Candles1 x Remote Controller1 x Manual

  • Color: White
  • Brand: TURN RAISE
  • ASIN: B07HN663YF

Ginode 9Pcs 12mm Shank Carbide Tip Boring Bar Set For 2" 50MM Boring Head Lathe Tool Carbide Tipped Bars Lathe Tool

Ginode 9Pcs 12mm Shank Carbide Tip Boring Bar

▲Specification: ● Material: alloy ● Shank : 12mm ● Length: 50mm-82mm ● Quantity: 9pcs ● Fit for: 2 inch 50mm boring head ▲Features: ● Suitable for boring hole. ● Deeper bore and more precise work. ● All shanks are ground to +0/-0.0005". ● 9 size boring bars to meet your different needs. ● Use in harder materials but also works great in aluminum and other soft metals.

  • Brand: Ginode
  • ASIN: B07DDJGDK4
  • UPC: 764560329383

Feit Electric MR16/GU10/DM/LED 6.5W/35W Dimmable Performance LED MR16 GU10

Feit Electric MR16/GU10/DM/LED 6.5W/35W Dimmable Performance LED MR16

Feit Electric Accent LED Lamp, Mercury Free, BPMR16/GU10/LED Designation, 3 W, 120 V, MR16 Bulb, Candelabra Screw E12 Base, 200 lumens, 20000 hr. Average Life, 3000 K Color Temperature, 38 deg Beam, 2 in Diameter, 2.4 in Length, RoHS Compliant, With 21 LED. The Feit Electric BPMR16/GU10/LED Light Bulb is a 6.5 watt, dimmable LED light bulb with output equivalent to a 35 watt incandescent. 86% more efficient than halogen and incandescent light bulbs, the BPMR16/GU10/LED offers 350 lumens of bright illumination and has a color temperature of 3000K offering a soft white light beam. The BPMR16/GU10 LED is a worthy lightbulb upgrade suitable for track lighting, recessed downlights, and display lighting.The Feit Electric BPMR16/GU10 LED is rated for a lifespan of 30,000 hours, is mercury-free, and has no ultra violet light. With instant on brightness. there is no delay or warm up period. This make it the ideal light bulb upgrade for decorative or accent lighting.

  • Color: -
  • Brand: Feit Electric
  • ASIN: B002Q8H9AI
  • UPC: 010007815675

Accusize Industrial Tools Cat50 Style C Pull Stud Retention Knob with Coolant Hole for Haas, Mitsubishi, Toshiba, Daewoo, Okk, Kitamura, 6780-1057

Accusize Industrial Tools Cat50 Style C Pull Stud

Fully ground on all critical surface including a pilot under the flange of retention knob for full contact between tool holder's taper end and retention knob, for HAAS, Mitsubishi, Toshiba, Daewoo, OKK, Kitamura, etc.

  • Brand: Accusize Industrial Tools
  • ASIN: B0718X3NN7

JRL ER32 Collet Chuck Holder Morse Taper MT2 Shank Tool Holder For CNC Lathe Milling

JRL ER32 Collet Chuck Holder Morse Taper MT2

Description:For CNC Lathe Milling1X ER32 MT2 Milling Chuck HolderSpecification: Brand new and high quality Model: MT2 Drawbar: M10 Color: Black+Silver Total Length: Approx. 120mm Top Diameter: Approx. 50m Rod Length: Approx. 65mm MT2 Shank Holding all ER32 collets

  • Brand: JRL
  • ASIN: B07G24G4MS

9PCS 1/2" C-6 Carbide Tipped Boring Bar Set, Shank Boring Bar Drill Bit Set for 50mm Boring Head Lathe Shank

9PCS 1/2" C-6 Carbide Tipped Boring Bar Set,

Specification: Shank diameter: 1/2 inch Material of Holder: 40 Cr Material of Blade: alloy Color: as the picture show Features: Fit for: 2 inch 50mm boring head Suitable for boring hole Durable and long service life Can be used with 50mm MT3-M12 Morse Taper Boring Bar for Lathe Milling 9 Piece boring bar set features C-6 carbide for use in harder materials but also works great in aluminum and other soft metals Package Included: 9x Shank Boring Bars Note: Please allow minor error due to manual measurement. Due to the difference between different monitors, the picture may not reflect the actual color of the item.

  • Brand: PTPTRATE
  • ASIN: B07PDJWBF6
  • UPC: 749235061935

XKSIKjian's Hardware Tool, ER32 MT3 M12 Collet Chuck Holder Fixed CNC Milling Lathe Straight Taper Home Improvement Tools Kit

XKSIKjian's Hardware Tool, ER32 MT3 M12 Collet Chuck

Description: MT3 Shank Holding all ER32 collets. High grade DN65 carbon steel material, offers precision ground. Item Name: ER32 MT3 M12 Milling Chuck Holder Shank Type: MT3 Collet Type: ER32 Drawbar Thread: M12 Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Package includes: 1 x ER32 MT3 M12 Milling Chuck Holder

  • Color: 1#
  • Brand: XKSIKjian's Hand Tool
  • ASIN: B07TRK2QCQ

Taper Bar, TBVECHI Boring Head, Universal 50mm MT3-M12 Boring Head With Morse Taper Shank For Lathe Milling Tool (USA Stock)

Taper Bar, TBVECHI Boring Head, Universal 50mm MT3-M12

50mm MT3-M12 Boring Head With Morse Taper Shank   Specifications: ◆ Model: MT3-M12 ◆ Material: High carbon steel ◆ Precision: 0.01mm ◆ Angle: 60° Features: ☞ The surface is quite smooth which offers a comfortable feeling and nice appearance.  ☞ The hardness and endurance of the surface are improved.  ☞ This MT3-M12 holder has better cleanness and more stable accuracy. ☞ It can be used when boring holes, circles, end faces, step holes, inner hole end faces, cutting inner hole and ring groove on outer circles, etc. ☞ It is a main accessory for boring CNC machine tool, jig boring machine, horizontal boring machine, common boring and milling machine. Packages: ✔ 1 x MT3-M12 Taper Bar ✔ 1 x Boring Head ✔ 3 x Hex T-Wrench ✔ 1 Set of Rivnut Setting Tools (13Pcs)

  • Brand: TBvechi
  • ASIN: B07TB44XQF
  • UPC: 796862497545

HHIP 7016-0015#50 Spindle Taper Wiper

HHIP 7016-0015#50 Spindle Taper

HHIP #50 spindle taper wiper and it can be used on tool holder tapers NMTB, cat and BT. Maintains spindle accuracy and rigid contact.

  • Brand: HHIP
  • ASIN: B01LW77365
  • UPC: 769053062075

BT Flange End Mill Holders Taper 50 / 1-1/4" Dia. x 4.00" Proj.

BT Flange End Mill Holders Taper 50 /

* Produced according to AT3 specifications. * Made of alloy forged steel for long, durable service life. * Hardened to RC 52-56 and ground to ensure maximum accuracy. * End Mill Socket T.I.R. * Through spindle coolant capability.

  • Brand: Bison
  • ASIN: B005LQ28VC

DEQIUE 50pcs 1.0/1.5/2.0/2.5/3.0mm High Speed Steel with Titanium Coated Power Hand Drill Tools Twist Bits Set For Woodwork

DEQIUE 50pcs 1.0/1.5/2.0/2.5/3.0mm High Speed Steel with Titanium

The Metal Drillers, Woodworkers, and Other Professional's ChoiceDEQIUE Drill Best Set is the best choice when you want to punch holes through wood, metal, and plastics. Our drill bits are made with High Speed Steel (HSS 4241) and can be used for general purpose applications for both ferrous and nonferrous materials. HSS is good for retaining temper at high speeds making them perfect for drilling Wood, Metal, Plastics and most Ceramics.These drill bits provide smooth, polished finish on the tool and they offer the widest selection of sizes. These sizes are ideal if you want to create holes of a specific diameter.50 PC. Titanium Coated HSS 1mm-3mm Twist Drill Bits Set SetKit Includes: To View Size and Quantity of All Bits See The Amazon Product ImageDesigned For Long Drilling Life in Metal, Wood and PlasticHigh speed steel bits which have been coated with titanium nitride. This special coating gives the bits a very high surface hardness to help penetrate tough materials, makes the bits highly corrosion resistant and significantly reduces friction between bit and workpiece. Titanium coated bits last up to 6X longer than standard high speed steel bits.If you are a PRO then DEQIUE Drill Bits Sear can be a great addition to your tools assortment and doing so will increase production, l...

  • Brand: DQ DEQIUE
  • ASIN: B07D3NDLP6
  • UPC: 698253517323

WUPYI 6.3" R8 ER32 7/16 Collet Chuck Holder CNC Milling Lathe Tool Wrench and Lathe R8 Spindle

WUPYI 6.3" R8 ER32 7/16 Collet Chuck Holder

Specifications:Item: R8-ER32Material: MetalSize: 16cm/6.3 inchR8 spindleDrawbar thread : 7/16ER32 clamping range :1-20mmSpanner/wrench1X 45-52Suitable For: R8 dedicated machineFeatures:-Precision collet chuck holder for professionals and hobbyists demanding.-Collet must be assembled into the clamping nut before inserting into the chuck.-Ease of operation and high quality work results.Note:1. Before using this tool, please measurement tool deflection, tool deflection accuracy exceeds 0.01MM, please correct before cutting.2. The tool extends the length of the chuck as short as possible, the tool extends the amount of time longer, if extended, please cut their own speed, feed rate or cutting the amount.3. If the cutting of abnormal vibration or sound, cut spindle speed and depth of cut to improve the situation so far.Packages:1xR8-ER32 Collet Chuck 1x spanner

  • Brand: WUPYI
  • ASIN: B07NW27LBJ
  • UPC: 692232910181

SODIAL Mta2 Er20 Milling Chuck Flat Tail Collet Chuck Holder Morse Taper Shank Tool For Cnc Lathe

SODIAL Mta2 Er20 Milling Chuck Flat Tail Collet

* SODIAL is a registered trademark. ONLY Authorized seller of SODIAL can sell under SODIAL listings.Our products will enhance your experience to unparalleled inspiration. Color: silver + blackMaterial: SteelPackage Contents: 1* Milling chuckOnly the above package content, other products are not included.Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

  • Color: silver & black
  • Brand: SODIAL
  • ASIN: B07PXM378Y
  • UPC: 194031028246

MT2 Shank ER16-50 M10 Morse Taper Milling Collet Chuck Holder Adapter CNC Tool Arbor

MT2 Shank ER16-50 M10 Morse Taper Milling Collet

  • ASIN: B074DVDDH3
  • UPC: 736691392536

FINCOS BT40 MTB1 MTB2 MTB3 MTB4 Shell End Mill Arbor Tool Holder Morse Taper Chucks Shell End Mill Arbor - (Angle: BT40 MTB2 50L)

FINCOS BT40 MTB1 MTB2 MTB3 MTB4 Shell End

Item specifics:Coating: OtherHardness: HighModel number: BT40-MTB

  • Brand: FINCOS
  • ASIN: B07Q9PWSVC
  • UPC: 706232397856

MT2-ER16-50 Collet Chuck M10 Taper Collet Chuck Holder Face Milling Arbor Adapter CNC Milling Tools Lathe Accessories

MT2-ER16-50 Collet Chuck M10 Taper Collet Chuck Holder

Features: The surface is quite smooth which offers a comfortable feeling and nice appearance. The hardness and endurance of the surface are improved. Antirust precision ground and hand inspected. This MT2 holder has better cleanness and more stable accuracy. It is well packed in a container which will protect holder from damage. This MT2 holder is suitable for all ER16 collets. Mainly used on milling machine, drilling machine, lathe, small machine tools. Specifications: Material: Carbon steel Type: ER16 MT2 M10 Thread Outer Diameter: M10 Nut Outer Diameter: 28mm Clamp Capacity: 1mm-10mm Quantity: 1pc Package Includes: 1 x MT2 Holder

  • Brand: Single Mom
  • ASIN: B07CTH3WLF

50mm MT2 Boring Head Shank Taper Collet Chuck Holder Face Arbor Adapter CNC Milling Tools + 2Inch Lathe Boring Head + Hex Keys

50mm MT2 Boring Head Shank Taper Collet Chuck

Features: The surface is quite smooth which offers a comfortable feeling and nice appearance. The hardness and endurance of the surface is perfect. Made of high-carbon steel, durable to use. This MT2 holder is stable and accurate. It can be used when boring holes, circles, end faces, step holes, inner hole end faces, cutting inner hole and ring groove on outer circles, etc. Specification: Material: High-carbon steel Type: Milling tools Weight: 1189g Note: Due to the manual measurement, there might be some error. Package Includes: 1 x MT2 Taper Hold and Boring Head 3 x Hex Keys

  • Brand: Walfront
  • ASIN: B07B9YZ2G7
  • UPC: 654936140585

MT2-ER16-50 M10 collet chuck Taper Collet Chuck Holder Face Milling Arbor Adapter CNC Milling Tools

MT2-ER16-50 M10 collet chuck Taper Collet Chuck Holder

Application:Milling CutterUnit Type:piecePackage Weight:0.3kg (0.66lb.)Package Size:13cm x 4cm x 4cm (5.12in x 1.57in x 1.57in)

  • Brand: SDLMNBVCXZ
  • ASIN: B07MRC175G

Anncus CNC Collet Chuck Holder CNC MT2-ER16-50 M10 Taper Collet Chuck Holder Face Milling Arbor Adapter CNC Milling Tools

Anncus CNC Collet Chuck Holder CNC MT2-ER16-50 M10

Collet Chuck Holder CNC MT2-ER16-50 M10 Taper Collet Chuck Holder Face Milling Arbor Adapter CNC Milling Tools  Features: The surface is quite smooth which offers a comfortable feeling and nice appearance.  The hardness and endurance of the surface are improved.  Antirust precision ground and hand inspected.  This MT2 holder has better cleanness and more stable accuracy.  It is well packed in a container which will protect holder from damage. This MT2 holder is suitable for all ER16 collets. Mainly used on milling machine, drilling machine, lathe, small machine tools. Specifications: Material: Carbon steel Type: ER16 MT2 M10Thread Outer Diameter: M10Nut Outer Diameter: 28mmClamp Capacity: 1mm-10mmQuantity: 1pc Package includes: 1 x MT2 Holder Item specifics:Model number: MT2 Collet Chuck HolderApplication: Milling Cutter

  • Brand: Anccus
  • ASIN: B07KSNCSTX
  • UPC: 765251465069

Akozon MT2 Holder, MT2-ER16-50 M10 Taper Collet Chuck Holder Face Milling Arbor Adapter CNC Milling Tools

Akozon MT2 Holder, MT2-ER16-50 M10 Taper Collet Chuck

Features: The surface is quite smooth which offers a comfortable feeling and nice appearance.  The hardness and endurance of the surface are improved.  Antirust precision ground and hand inspected.  This MT2 holder has better cleanness and more stable accuracy.  It is well packed in a container which will protect holder from damage. This MT2 holder is suitable for all ER16 collets. Mainly used on milling machine, drilling machine, lathe, small machine tools. Specifications: Material: Carbon steel Type: ER16 MT2 M10 Thread Outer Diameter: M10 Nut Outer Diameter: 28mm Clamp Capacity: 1mm-10mm Quantity: 1pc Package Includes: 1 x MT2 Holder

  • Brand: Akozon
  • ASIN: B07H2DR553
  • UPC: 798382639511

CMT 183-ISO Universal Assembly Support for ISO30 Chucks, 50mm Diameter

CMT 183-ISO Universal Assembly Support for ISO30 Chucks,

Universal assembly support for 183-ISO chucks. The innovation lies in the special bidirectional roller bearings which clamp the tool holder to the flange. This unique system offers maximum protection to the tool taper and clamps are no longer needed! The special bidirectional roller bearing, clamps the toolholder to the flange, offering maximum protection to the tool taper.

  • Brand: CMT
  • ASIN: B00EV5A0C8
  • UPC: 664252030477
Similar 50 Taper Tool Holder Shopping Results