OAKTON 35610-10 pH/CON 510 Benchtop Meter, -2 to 16 pH Range, 0 to 1999 µS Conductivity Range, -600 to 600 mV Range, 0 to 9.99 ppm TDS Range, 0 Degree C to 100 Degree C Temp Range

OAKTON 35610-10 pH/CON 510 Benchtop Meter, -2 to

  • Brand: Oakton
  • ASIN: B00BTMFG5M

Amprobe VC221B Padded Vinyl Carrying Case

Amprobe VC221B Padded Vinyl Carrying

The Amprobe VC221B soft, zippered, pouch-style, padded vinyl carrying case with belt loop is for storing and transporting compatible multimeters, clamp meters, and testing tools. Vinyl construction protects against dust and light moisture. Padded interior protects against bumps and abrasions. The pouch zips closed to protect contents from dirt and moisture, and it has a belt loop to free hands during transport. The case measures 8.5 x 4.5 x 2.5 inches (216 x 114 x 64 mm, H x W x D, where H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back).Multimeters are electrical test meters that measure multiple properties of an electrical circuit, such as current, voltage, resistance, capacitance, and continuity. Available in handheld or benchtop models, multimeters diagnose electrical problems in electrical equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Multimeters display information either in analog or digital form. Factors that influence meter choice include the electrical properties to be measured, the anticipated range of results, and the desired level of protection against...

  • Brand: Amprobe
  • ASIN: B0028YOCNW
  • UPC: 732454228678

Thermo Scientific Orion Star A122 Portable Conductivity/TDS/Temperature Benchtop Meter

Thermo Scientific Orion Star A122 Portable Conductivity/TDS/Temperature Benchtop

The Orion Star A122 Portable Conductivity Meter measures conductivity, total dissolved solids (TDS), and temperature and takes an 8-pin mini DIN conductivity with temperature probe (not included). The meter has selectable cell constant, one-point manual calibration, and automatic calibration if using a Thermo Scientific Orion conductivity standard (not included). The LCD screen with onscreen instructions displays the measurement and temperature simultaneously. The AUTOREAD feature locks the stable reading onscreen, and the memory can store up to 50 data points. The meter is waterproof, with an IP67 rating. Certifications include CE, TUV, and FCC Class A limits. Conductivity meters are commonly used in the water-quality testing, waste-water treatment, hydroponics, agriculture, and aquaculture industries, in cosmetics manufacturing, and in laboratory research. SpecificationsSpecificationsConductivity range0.1 μS/cm to 200 mS/cm Conductivity resolution0.01μS minimum; 3 significant figuresConductivity accuracy0.5% reading + or -1 digit TDS range1 to 19,999ppm TDS resolution4 significant digitsTDS accuracy0.5% reading + or - 1 digit Temperature range-5 to 105Data management featuresStores 50 data setsPower source Four AA batteries (included), or AC adapter (sold separately)  Condu...

  • Brand: Thermo Scientific Orion
  • ASIN: B006YDQ9I4

Amprobe VC30A Vinyl Carrying Case

Amprobe VC30A Vinyl Carrying

The Amprobe VC30A soft, zippered, pouch-style, vinyl carrying case with belt loop is for storing and transporting compatible multimeters, clamp meters, and testing tools. Vinyl construction protects against dust and light moisture. The pouch zips closed to protect contents from dirt and moisture, and it has a belt loop to free hands during transport. The case measures 7.5 x 3.4 x 1.5 inches (191 x 86 x 38 mm, H x W x D, where H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back).Multimeters are electrical test meters that measure multiple properties of an electrical circuit, such as current, voltage, resistance, capacitance, and continuity. Available in handheld or benchtop models, multimeters diagnose electrical problems in electrical equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Multimeters display information either in analog or digital form. Factors that influence meter choice include the electrical properties to be measured, the anticipated range of results, and the desired level of protection against transient voltages. Safety ratings are based on the Internatio...

  • Brand: Amprobe
  • ASIN: B0028YSDXC
  • UPC: 095969425179

Oakton WD-35812-12 Chloride Cl- Double-Junction Epoxy Body Ion Selective Electrode, 35500 - 1.8 ppm Range

Oakton WD-35812-12 Chloride Cl- Double-Junction Epoxy Body Ion

The Oakton refillable double junction combination ion selective electrode (ISE) measures the ion concentration in aqueous solutions, and has an epoxy body for impact resistance and durability. This combination electrode contains both the measuring half-cell and the reference half-cell to minimize electrostatic interference and provide consistent readings. The double junction protects against silver wire contamination and helps prevent clogging in dirty water and solutions with heavy metals or organics. The electrode is available in a variety of models that measure specific ions to suit different applications. It is 12mm in diameter and 110mm long, and has a 3-foot cable with a Bayonet Neill-Concelman (BNC) connector for attaching to meters with a BNC connection. The electrode comes with a 15 mL bottle of electrolyte solution and a pipette for refilling. The filling solution composition can be adjusted to suit the sample requirements. ISEs respond selectively to ions in the presence of other ions, and they are commonly used for water testing and analyzing biological samples in hydroponics, aquaculture, and agriculture, among other applications. The electrode is for use with the Oakton Ion 510, pH/Ion 2100 Bench-top, or Ion Acorn meters. It can also be used with any ion meter, or a...

  • Brand: Oakton
  • ASIN: B004G8PUS4

Oakton WD-35812-18 Fluoride F- Double-Junction Epoxy Body Ion Selective Electrode, Saturated to 0.02 ppm Range

Oakton WD-35812-18 Fluoride F- Double-Junction Epoxy Body Ion

The Oakton refillable double junction combination ion selective electrode (ISE) measures the ion concentration in aqueous solutions, and has an epoxy body for impact resistance and durability. This combination electrode contains both the measuring half-cell and the reference half-cell to minimize electrostatic interference and provide consistent readings. The double junction protects against silver wire contamination and helps prevent clogging in dirty water and solutions with heavy metals or organics. The electrode is available in a variety of models that measure specific ions to suit different applications. It is 12mm in diameter and 110mm long, and has a 3-foot cable with a Bayonet Neill-Concelman (BNC) connector for attaching to meters with a BNC connection. The electrode comes with a 15 mL bottle of electrolyte solution and a pipette for refilling. The filling solution composition can be adjusted to suit the sample requirements. ISEs respond selectively to ions in the presence of other ions, and they are commonly used for water testing and analyzing biological samples in hydroponics, aquaculture, and agriculture, among other applications. The electrode is for use with the Oakton Ion 510, pH/Ion 2100 Bench-top, or Ion Acorn meters. It can also be used with any ion meter, or a...

  • Brand: Oakton
  • ASIN: B004G8PUSY

Oakton WD-35812-02 Ammonium NH4+ Double-Junction Epoxy Body Ion Selective Electrode, 18000 -0.1 ppm Range

Oakton WD-35812-02 Ammonium NH4+ Double-Junction Epoxy Body Ion

The Oakton refillable double junction combination ion selective electrode (ISE) measures the ion concentration in aqueous solutions, and has an epoxy body for impact resistance and durability. This combination electrode contains both the measuring half-cell and the reference half-cell to minimize electrostatic interference and provide consistent readings. The double junction protects against silver wire contamination and helps prevent clogging in dirty water and solutions with heavy metals or organics. The electrode is available in a variety of models that measure specific ions to suit different applications. It is 12mm in diameter and 110mm long, and has a 3-foot cable with a Bayonet Neill-Concelman (BNC) connector for attaching to meters with a BNC connection. The electrode comes with a 15 mL bottle of electrolyte solution and a pipette for refilling. The filling solution composition can be adjusted to suit the sample requirements. ISEs respond selectively to ions in the presence of other ions, and they are commonly used for water testing and analyzing biological samples in hydroponics, aquaculture, and agriculture, among other applications. The electrode is for use with the Oakton Ion 510, pH/Ion 2100 Bench-top, or Ion Acorn meters. It can also be used with any ion meter, or a...

  • Brand: Oakton
  • ASIN: B004G8PUQG

Oakton WD-35812-48 Water Hardness Ca+2, Mg+2 Double Junction Epoxy Body Ion Selective Electrode, 40000 - 0.4 ppm Range

Oakton WD-35812-48 Water Hardness Ca+2, Mg+2 Double Junction

The Oakton refillable double junction combination ion selective electrode (ISE) measures the ion concentration in aqueous solutions, and has an epoxy body for impact resistance and durability. This combination electrode contains both the measuring half-cell and the reference half-cell to minimize electrostatic interference and provide consistent readings. The double junction protects against silver wire contamination and helps prevent clogging in dirty water and solutions with heavy metals or organics. The electrode is available in a variety of models that measure specific ions to suit different applications. It is 12mm in diameter and 110mm long, and has a 3-foot cable with a Bayonet Neill-Concelman (BNC) connector for attaching to meters with a BNC connection. The electrode comes with a 15 mL bottle of electrolyte solution and a pipette for refilling. The filling solution composition can be adjusted to suit the sample requirements. ISEs respond selectively to ions in the presence of other ions, and they are commonly used for water testing and analyzing biological samples in hydroponics, aquaculture, and agriculture, among other applications. The electrode is for use with the Oakton Ion 510, pH/Ion 2100 Bench-top, or Ion Acorn meters. It can also be used with any ion meter, or a...

  • Brand: Oakton
  • ASIN: B004G8PUVQ

Oakton WD-35802-45 Surfactant X+ X- Double Junction Epoxy Body Ion Selective Electrode, 12000 - 1.0 ppm Range

Oakton WD-35802-45 Surfactant X+ X- Double Junction Epoxy

The Oakton WD-35802-45 is a Surfactant (X+, X-) glass-body, polymer membrane sensor, ion-selective electrode (ISE), with a double-junction to protect silver-wire contamination, and to help prevent clogging. It is commonly used for detergents, dishwashing liquids, cleaning supplies, and food products. It has a glass-body to resist higher temperatures, and for more effective sealing. Its outer reference area is silver-free to resist contamination. The electrode has a BNC-connected combination reference and measuring cell, for ease of use and to provide tight coaxial cable connections. This electrode is refillable, has a temperature range of 0 to 50 degrees C (32 to 122 degrees F), and a pH range of 2 to 12. Its measuring range is 5E-2 M to 1E-5 M and 12,000 to 1.0 ppm. Interfering ions include similar types of surfactants. The electrode has a typical response time of 20 to 30 seconds, varying with solution concentration. It is used with the Oakton Ion 510, pH 2500 Ion Benchtop, or Ion Acorn meters. It can also be used with any ion meter, or with any meter with a 0.1 mV resolution. The electrode comes with a 3-foot cable, replacement membrane, 15 mL of electrolyte, and a filling pipette. Use with a calibration standard (sold separately). ISEs respond selectively to ions in the prese...

  • Brand: Oakton
  • ASIN: B004G8PTHQ

Oakton WD-35812-40 Silver/Sulfide Ag+/S-2 Double-Junction Epoxy Body Ion Selective Electrode, 107900 - 0.01 ppm Range

Oakton WD-35812-40 Silver/Sulfide Ag+/S-2 Double-Junction Epoxy Body Ion

The Oakton refillable double junction combination ion selective electrode (ISE) measures the ion concentration in aqueous solutions, and has an epoxy body for impact resistance and durability. This combination electrode contains both the measuring half-cell and the reference half-cell to minimize electrostatic interference and provide consistent readings. The double junction protects against silver wire contamination and helps prevent clogging in dirty water and solutions with heavy metals or organics. The electrode is available in a variety of models that measure specific ions to suit different applications. It is 12mm in diameter and 110mm long, and has a 3-foot cable with a Bayonet Neill-Concelman (BNC) connector for attaching to meters with a BNC connection. The electrode comes with a 15 mL bottle of electrolyte solution and a pipette for refilling. The filling solution composition can be adjusted to suit the sample requirements. ISEs respond selectively to ions in the presence of other ions, and they are commonly used for water testing and analyzing biological samples in hydroponics, aquaculture, and agriculture, among other applications. The electrode is for use with the Oakton Ion 510, pH/Ion 2100 Bench-top, or Ion Acorn meters. It can also be used with any ion meter, or a...

  • Brand: Oakton
  • ASIN: B004G8PUUW

Oakton WD-35812-08 Calcium Ca+2 Double-Junction Epoxy Body Ion Selective Electrode, 40000 - 0.2 ppm Range

Oakton WD-35812-08 Calcium Ca+2 Double-Junction Epoxy Body Ion

The Oakton refillable double junction combination ion selective electrode (ISE) measures the ion concentration in aqueous solutions, and has an epoxy body for impact resistance and durability. This combination electrode contains both the measuring half-cell and the reference half-cell to minimize electrostatic interference and provide consistent readings. The double junction protects against silver wire contamination and helps prevent clogging in dirty water and solutions with heavy metals or organics. The electrode is available in a variety of models that measure specific ions to suit different applications. It is 12mm in diameter and 110mm long, and has a 3-foot cable with a Bayonet Neill-Concelman (BNC) connector for attaching to meters with a BNC connection. The electrode comes with a 15 mL bottle of electrolyte solution and a pipette for refilling. The filling solution composition can be adjusted to suit the sample requirements. ISEs respond selectively to ions in the presence of other ions, and they are commonly used for water testing and analyzing biological samples in hydroponics, aquaculture, and agriculture, among other applications. The electrode is for use with the Oakton Ion 510, pH/Ion 2100 Bench-top, or Ion Acorn meters. It can also be used with any ion meter, or a...

  • Brand: Oakton
  • ASIN: B004G8PURU

Cole-Parmer All-in-One pH/ATC Probe, Refillable/DJ/Glass

Cole-Parmer All-in-One pH/ATC Probe,

These glass 'all-in-one' pH/temperature electrodes offer more reliable and stable reading than epoxy versions. Amber glass bulb for low sodium error even in solutions with a pH greater than 12. Double-junction design assures longer life even with dirty or troublesome samples such as TRIS buffer or wastewater. A 2.5 mm mini audio plug combined with a thermistor for automatic temperature compensation input to your Oakton pH meter. Compatible with the following Oakton meters: handheld pH/ion 5, 6, 11, 110 and benchtop 510, 700, 1100, 2100, and 2700. What's included: 1-m cable with BNC pH connection and 2.5 mm mini audio plug ATC connection use these electrodes with most Oakton handheld or benchtop pH meters for accurate and reliable readings refillable electrode provides more accurate pH measurement Amber glass bulb minimizes sodium error in high pH solutions use at temperatures up 110°c

  • Brand: Cole-Parmer
  • ASIN: B00NG2GJQI

Oakton WD-35802-13 Chloride Cl- Glass Body Double Junction Ion-Selective Electrode, 35500 - 1.8 ppm Range

Oakton WD-35802-13 Chloride Cl- Glass Body Double Junction

The Oakton WD-35802-13 is a Chloride (Cl-), glass-body, solid-state, ion-selective electrode (ISE), with a double-junction to protect silver wire contamination and to help prevent clogging. It is commonly used to test river/tap water, plant tissue, soils, boiler feed water, blood electrolytes, sweat, urine, cement, plating baths, food samples, and in chemical analysis. It has a glass body to resist higher temperatures, and for effective sealing. The outer reference area is silver-free to resist contamination. The electrode houses a BNC-connected combination reference cell and measuring cell, for ease of use and to provide a tight coaxial cable connection. The electrode is refillable, has a temperature range of 0 to 80 degrees C (32 to 176 degrees F), and a pH range of 2 to 12 pH. Its measuring range is 1.0 to 5E-5 M and 35,500 to 1.8 ppm. Interfering ions include OH-, S-2, Br-, I-, and CN-. The electrode has a typical response time of 20 to 30 seconds, varying with solution concentration. It is used with the Oakton Ion 510, pH 2500 Ion Benchtop, or Ion Acorn meters. It can also be used with any ion meter, or with any meter with a 0.1 mV resolution. The electrode comes with a 3-foot cable, replacement membrane, 15-mL of electrolyte and a filling pipette. Use with a calibration sta...

  • Brand: Oakton
  • ASIN: B004G8PT0S

Oakton WD-35812-30 Nitrate NO3 Nitrate NO3- Single Junction Epoxy Body Ion Selective Electrode, 62000 - 0.5 ppm Range

Oakton WD-35812-30 Nitrate NO3 Nitrate NO3- Single Junction

The Oakton refillable double junction combination ion selective electrode (ISE) measures the ion concentration in aqueous solutions, and has an epoxy body for impact resistance and durability. This combination electrode contains both the measuring half-cell and the reference half-cell to minimize electrostatic interference and provide consistent readings. The double junction protects against silver wire contamination and helps prevent clogging in dirty water and solutions with heavy metals or organics. The electrode is available in a variety of models that measure specific ions to suit different applications. It is 12mm in diameter and 110mm long, and has a 3-foot cable with a Bayonet Neill-Concelman (BNC) connector for attaching to meters with a BNC connection. The electrode comes with a 15 mL bottle of electrolyte solution and a pipette for refilling. The filling solution composition can be adjusted to suit the sample requirements. ISEs respond selectively to ions in the presence of other ions, and they are commonly used for water testing and analyzing biological samples in hydroponics, aquaculture, and agriculture, among other applications. The electrode is for use with the Oakton Ion 510, pH/Ion 2100 Bench-top, or Ion Acorn meters. It can also be used with any ion meter, or a...

  • Brand: Oakton
  • ASIN: B004G8PUU2
Similar 510 Benchtop Meter Shopping Results