Z-Vent Z-Flex 4" x 18" Stainless Steel Vent Pipe 2SVEPWCF0401.5 AL29-4C Gasket

Z-Vent Z-Flex 4" x 18" Stainless Steel Vent

Z-Flex Z-Vent 4" x 18" Stainless Steel Vent Pipe (2SVEPWCF0401.5). This straight piece of pipe has a silicon gasket and an integral gear clamp on the female end. The male end can be cut to size with a hacksaw. Z-Flex Z-Vent stainless steel vent pipe is ideal for the Bosch Therm 940ES / Bosch Therm 830ES / Bosch Therm 660EF / Bosch AquaStar 2700ES / Bosch AquaStar 2400ES / Bosch Evolution 500 tankless water heaters as well as the legacy Bosch Pro 715ES / Bosch Pro 635ES / Bosch AquaStar 2400E / Bosch AquaStar 250SX heaters as well as the Bosch AquaStar 240FX, AquaStar 125FX, Takagi TK1, TK2, TKD20, TKJR, TK1S, TM1 tank-less water heaters.

  • Brand: Z-Vent
  • ASIN: B0013L89A8
  • UPC: 663053021158

Noritz VP4-36STRAIGHT 36" Straight vent pipe for 4" Stainless Steel

Noritz VP4-36STRAIGHT 36" Straight vent pipe for 4"

4" Diameter, 36" Straight category III stainless steel vent pipe

  • Color: Iron
  • Brand: Noritz
  • ASIN: B008JG0L7O
  • UPC: 817000011086

Noritz VP5-36STRAIGHT 36" Straight vent pipe for 5" Stainless Steel

Noritz VP5-36STRAIGHT 36" Straight vent pipe for 5"

5" Diameter, 36" Category III stainless steel vent pipe

  • Color: Stainless Steel
  • Brand: Noritz
  • ASIN: B008ORCN56
  • UPC: 817000011161

Rinnai 224069 Condensate Collector

Rinnai 224069 Condensate

6" Length Plastic Condensate Collector Rinnai's unique Ubbink concentric venting system provides maximum performance, safety, and ease of installation. Compatible with all indoor Rinnai water heater models, except the 98 series which utilizes separate intake and exhaust venting. Plastic Outer Vent For Intake Easy To Cut Compared To Stainless Steel Dent And Impact Resistant Corrosion-Proof Non-Flammable Material (ul94-V0) Seamless Extruded Materials Casted Elbows And Adapters White Semi-Gloss Finish (Eu Ral 9016) Aluminum Inner Vent For Exhaust Easy To Cut Compared To Stainless Steel Stable, Thick-Walled Material Dent And Crease Resistant Not Affected By Scratches Seamless Extruded Material No Weld lines Thick-Walled, Casted Elbows And Adapters Lightweight Seal Rings With Maximum Temperature 400°F (Approx. 200°C) Features: GSA Approved Professional Installation Recommended Must Be Used In Horizontal Terminations If A Vertical Rise In The Vent System Exceeds 5' Elbow May Be Required For Venting Applications. Specifications: Length: 6" For Rinnai Certified Installation: Contact Rinnai at 844-348-4715

  • Brand: Bradford White
  • ASIN: B004PYEB8Y

Noritz VP4-45ELBOW 45 Degree elbow vent pipe for 4" Stainless Steel

Noritz VP4-45ELBOW 45 Degree elbow vent pipe for

4" Diameter, 45 Degree elbow category III stainless steel vent pipe

  • Color: Iron
  • Brand: Noritz
  • ASIN: B008JG0K7A
  • UPC: 817000011352

NovaFlex 2SVEPWCF0402 Aluminized Steel Z-Vent Pipe

NovaFlex 2SVEPWCF0402 Aluminized Steel Z-Vent

Z-Vent 2SVEPWCF0402 is a 4" x 2ft long, Category III Stainless Steel Vent pipe.

  • Brand: Z-Flex
  • ASIN: B003M6Q9TA
  • UPC: 663053021080

DuraVent FSHDT3 3" Inner Diameter - FasNSeal AL29-4C Special Gas Vent Pipe - Sin, Stainless Steel

DuraVent FSHDT3 3" Inner Diameter - FasNSeal AL29-4C

FasNSeal Collection Horizontal Drip Tee for 3 Inch FasNSeal Vent Pipe Warranty Notice: M&G DuraVent warranty applies to this professional grade product only when installed by a trained professional installer. This FasNSeal Horizontal Drip Tee for 3 Inch FasNSeal Vent Pipe features a patented built in mechanical locking band and triple lipped directional gaskets which allows for ease of installation. Use to manage condensates in horizontal runs. Optimal when ganging multiple appliances into a common vent. Features: Inner Diameter: 3" Fuel Types Compatible With: Gas UL Listed: Yes Length: 6" Single Wall Construction Limited Lifetime Warranty All FasNSeal single-wall and double-wall vent lengths and components feature patented built-in mechanical locking band and triple lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90° from mechanical locking bands. This construction feature allows for ease of installation. All FasNSeal components which come in contact with exhaust gases and condensates are now silicone free. This important design and manufacturing feature greatly reduces the chances of system breakdown and failure. The main problems with silicone are there are too many adhesion factors which are very difficult to control and th...

  • Color: stainless steel
  • Brand: DuraVent
  • ASIN: B004BUB1D0
  • UPC: 841211000126

Rinnai 224255 90-Degree Metal Elbow for LS Series Tankless Water Heater Venting

Rinnai 224255 90-Degree Metal Elbow for LS Series

Rinnai's unique Nubbin concentric venting system provides maximum performance, safety, and ease of installation. Compatible with all indoor Rinnai water heater models, except the 98 series which utilizes separate intake and exhaust venting.

  • Color: n/a
  • Brand: Rinnai
  • ASIN: B0082LSENE

Z-Flex Z-Vent 4" x 12" Stainless Steel Vent Pipe (2SVEPWCF0401)

Z-Flex Z-Vent 4" x 12" Stainless Steel Vent

Z-Flex Z-Vent 4" x 12" Stainless Steel Vent Pipe (2SVEPWCF0401). This straight piece of pipe has a silicon gasket and an integral gear clamp on the female end. The male end can be cut to size with a hacksaw. Z-Flex Z-Vent stainless steel vent pipe is ideal for the Bosch Therm 940ES / Bosch Therm 830ES / Bosch Therm 660EF / Bosch AquaStar 2700ES / Bosch AquaStar 2400ES / Bosch Evolution 500 tankless water heaters as well as the legacy Bosch Pro 715ES / Bosch Pro 635ES / Bosch AquaStar 2400E / Bosch AquaStar 250SX heaters as well as the Bosch AquaStar 240FX, AquaStar 125FX, Takagi TK1, TK2, TKD20, TKJR, TK1S, TM1 tankless water heaters. Z-Flex Z-Vent is rated AL29-4C and is approved for Category I (vertical only), II, III & IV applications and is designed for use with boilers, high efficiency gas and oil heaters and water heaters where cool flue gases are vented under pressure. Z-Vent contains a built-in, fail-safe gasket and locking band connection. No sealant is required.

  • Brand: Z-Vent
  • ASIN: B00E5P5BGE
  • UPC: 663053021073

M&G Duravent FSUCD4 Fasnseal Universal Condensate Drain, 4 In.

M&G Duravent FSUCD4 Fasnseal Universal Condensate Drain, 4

Al29-4c category III venting | for use with thankless water heaters | appliance adapter is used to connect the heater to vent pipe - manufacturer: M&G Duravent

  • Color: stainless steel
  • Brand: M&G DuraVent
  • ASIN: B004BUBQQC
  • UPC: 841211007941

Z-Flex Z-Vent Pipe 2SVEPWCF0404 4"x4ft

Z-Flex Z-Vent Pipe 2SVEPWCF0404

Z-Vent 2SVEPWCF0404 is a 4" x 4ft long, Category III Stainless Steel Vent pipe.

  • Brand: Z-Flex
  • ASIN: B003QSE6PI
  • UPC: 663053021103

Noritz PVT-HL 3"/4" Horizontal hood /louvre vent termination for NRC66/ NRC71/ NRC98/ NRC111/ NCC199/ NRCP982/ NRCP1112

Noritz PVT-HL 3"/4" Horizontal hood /louvre vent termination

For use as horizontal intake, or termination when venting. For use only with condensing heaters.

  • Color: White
  • Brand: Noritz
  • ASIN: B008ORC9ZK
  • UPC: 817000011512

Noritz CSCR-1 Concentric storm collar ring for NR83DVC/ NR98DVC/ NC199DVC

Noritz CSCR-1 Concentric storm collar ring for NR83DVC/

Concentric Storm Collar Ring for use with Noritz CVP Concentric Vent Pipe

  • Brand: Noritz
  • ASIN: B007MPHGDU
  • UPC: 817000012502

Z-Flex Z-Vent 4" x 5' Stainless Steel Vent Pipe (2SVEPWCF0405)

Z-Flex Z-Vent 4" x 5' Stainless Steel Vent

Z-Flex Z-Vent 4" x 5 Stainless Steel Vent Pipe (2SVEPWCF0405). This straight piece of pipe has a silicon gasket and an integral gear clamp on the female end. The male end can be cut to size with a hacksaw. Z-Flex Z-Vent stainless steel vent pipe is ideal for the Bosch Therm 940ES / Bosch Therm 830ES / Bosch Therm 660EF / Bosch AquaStar 2700ES / Bosch AquaStar 2400ES / Bosch Evolution 500 tankless water heaters as well as the legacy Bosch Pro 715ES / Bosch Pro 635ES / Bosch AquaStar 2400E / Bosch AquaStar 250SX heaters as well as the Bosch AquaStar 240FX, AquaStar 125FX, Takagi TK1, TK2, TKD20, TKJR, TK1S, TM1 tankless water heaters. Z-Flex Z-Vent is rated AL29-4C and is approved for Category I (vertical only), II, III & IV applications and is designed for use with boilers, high efficiency gas and oil heaters and water heaters where cool flue gases are vented under pressure. Z-Vent contains a built-in, fail-safe gasket and locking band connection. No sealant is required.

  • Color: Steel
  • Brand: Z-Vent
  • ASIN: B00E5P5FTW
  • UPC: 663053021110

M&G Duravent FSVL1804 Vent Pipe Stainless Steel Cat Iii 4 In. X 18 In.

M&G Duravent FSVL1804 Vent Pipe Stainless Steel Cat

Al29-4c category III venting | for use with thankless water heaters - manufacturer: M&G Duravent. Vent pipe stainless steel cat III 4 in. X 18 in.

  • Color: stainless steel
  • Brand: M&G DuraVent
  • ASIN: B00196Y6IQ
  • UPC: 841211000515

Noritz RC4 Rain cap vertical vent termination for 4" Stainless Steel vent pipe

Noritz RC4 Rain cap vertical vent termination for

4" rain cap termination for use with NORITZ Category III stainless steel vent pipe

  • Color: Iron
  • Brand: Noritz
  • ASIN: B008ORCBN0
  • UPC: 817000011420

Takagi TK-KPW4-1 (9007998005) Wall Thimble 4.0" to 7.0" Wall Thickness, N/A

Takagi TK-KPW4-1 (9007998005) Wall Thimble 4.0" to 7.0"

The 3" and 4" diameter versions of this thimble have a length (across the side of the wall) of 10" x 10". The width (through to the outside of the wall) adjusts from 4" to 7". Features: » No sealant required - fits together with a simple gasketed connection » Gives you the highest pressure rating available » Can be cut to the length you need on site » Smooth finish and perfect fit with new fusion-welded pipe seams » Compatible with all Z-Flex Z-Vents » Vent material: AL29-4C stainless steel » Certification: Tested to meet or exceed Underwriters Laboratories (UL) spec UL1738 and ULS636 » Approval: Cat II, III, IV venting.

  • ASIN: B006C1P7YK

Noritz VP4-90ELBOW 90 Degree elbow vent pipe for 4" Stainless Steel

Noritz VP4-90ELBOW 90 Degree elbow vent pipe for

4" Diameter, 90 Degree elbow (L Shape) category III stainless steel vent pipe

  • Color: Iron
  • Brand: Noritz
  • ASIN: B008ORCKO0
  • UPC: 817000011383

Noritz ARF5 Angled roof flashing vertical roof member for 5" vent pipe

Noritz ARF5 Angled roof flashing vertical roof member

Noritz Roof Flashing for use with 5" Cat III venting on angled roof top applications

  • Color: Iron
  • Brand: Noritz
  • ASIN: B008ORC25C
  • UPC: 817000010232

Z-Flex 2SVEPWCF0403 Z-Vent Pipe 4 in X 3 ft

Z-Flex 2SVEPWCF0403 Z-Vent Pipe 4 in X 3

Z-Vent 2SVEPWCF0403 is a 4" x 3ft long, Category III Stainless Steel Vent pipe. Specs: Product Specs Diameter: 4" Size: 4" Length: 3 ft. Type: Tankless Water Heater Accessories Application: Plumbing

  • Brand: Z-Flex
  • ASIN: B003QSNLYK
  • UPC: 663053021097

Noritz VT3-PVCS Bird screen for 3" PVC Pipe Termination for NRC66/ NRC71/ NRC98/ NRC111/ NCC199/ NRCP982/ NRCP1112

Noritz VT3-PVCS Bird screen for 3" PVC Pipe

Force fits into 3" PVC fitting to prevent bird, squirrel, intake or nesting

  • Color: Silver / Pewter
  • Brand: Noritz
  • ASIN: B008JG0HM8
  • UPC: 817000010072

Noritz VC-4C 4-Inch Stainless Steel Vent Cap for Condensing Series

Noritz VC-4C 4-Inch Stainless Steel Vent Cap for

Noritz America Corporation was established in 2001 to meet a growing demand among American consumers for more cost effective hot water heater technology. Serving both homeowners and commercial users across the United States and Canada, Noritz America offers four distinguished lines of tankless gas water heaters to meet the varying needs of its broad spectrum of customers – ecoTOUGH, ProTOUGH and Value Solutions as well as full line of commercial. With a solid commitment to sustainability and superb technology solutions in tankless hot water heaters, Noritz makes significant investment in research and development. And through the dedication of its valued employees, Noritz Corporation continues to shape the future of sustainable living in North America through its tankless water heater solutions.

  • Color: Iron
  • Brand: Noritz
  • ASIN: B008ORCFQ8
  • UPC: 817000011550

Noritz DT4-V Drip tee vertical condensation drain for 4" Stainless Steel vent pipe

Noritz DT4-V Drip tee vertical condensation drain for

4" vertical drip tee for use with NORITZ Category III stainless steel vent pipe

  • Color: Iron
  • Brand: Noritz
  • ASIN: B008ORC8LA
  • UPC: 817000010263

Z-Vent Z-Flex 3" x 3 Stainless Steel Vent Pipe (2SVEPWCF0303)

Z-Vent Z-Flex 3" x 3 Stainless Steel Vent

Z-Flex Z-Vent 3" x 3' Stainless Steel Vent Pipe (2SVEPWCF0303). This straight piece of pipe has a silicon gasket and an integral gear clamp on the female end. The male end can be cut to size with a hacksaw. Z-Flex Z-Vent stainless steel vent pipe is ideal for the Bosch Therm 940ES / Bosch Therm 830ES / Bosch Therm 660EF / Bosch AquaStar 2700ES / Bosch AquaStar 2400ES / Bosch Evolution 500 tankless water heaters as well as the legacy Bosch Pro 715ES / Bosch Pro 635ES / Bosch AquaStar 2400E / Bosch AquaStar 250SX heaters. Z-Flex Z-Vent is rated AL29-4C and is approved for Category I (vertical only), II, III & IV applications and is designed for use with boilers, high efficiency gas and oil heaters and water heaters where cool flue gases are vented under pressure. Z-Vent contains a built-in, fail-safe gasket and locking band connection. No sealant is required.

  • Brand: Z-Vent
  • ASIN: B00E6GZ9LE
  • UPC: 796299280505

Noritz CVP-90ELB Concentric 90 degree elbow for NR83DVC/ NR98DVC/ NC199DVC

Noritz CVP-90ELB Concentric 90 degree elbow for NR83DVC/

Stainless steel concentric 90 degree elbow vent pipe for use with NORITZ DVC model heaters

  • Color: Black
  • Brand: Noritz
  • ASIN: B008JG0RW8
  • UPC: 817000011406

Rinnai 223181 11-1/2" Universal Non-Condensing Plastic Horizontal Termination Ki, N/A

Rinnai 223181 11-1/2" Universal Non-Condensing Plastic Horizontal Termination

11-1/2” Universal Non-Condensing Plastic Horizontal Termination Kit Rinnai's unique Ubbink concentric venting system provides maximum performance, safety, and ease of installation. Compatible with all indoor Rinnai water heater models, except the 98 series which utilizes separate intake and exhaust venting. Plastic Outer Vent For Intake Easy To Cut Compared To Stainless Steel Dent And Impact Resistant Corrosion-Proof Non-Flammable Material (ul94-V0) Seamless Extruded Materials Casted Elbows And Adapters White Semi-Gloss Finish (Eu Ral 9016) Aluminum Inner Vent For Exhaust Easy To Cut Compared To Stainless Steel Stable, Thick-Walled Material Dent And Crease Resistant Not Affected By Scratches Seamless Extruded Material No Weld lines Thick-Walled, Casted Elbows And Adapters Lightweight Seal Rings With Maximum Temperature 400°F (Approx. 200°C) Features: Zero Clearance To Combustibles Single Penetration Through Wall For Both Intake And Exhaust GSA Approved Easy Assembly Fits Models: RL94i, RL75i, RV65i Professional Installation Recommended Includes: (1) 90 Degree Elbow (1) 11-1/2" Horizontal Termination Pipe Rubber Wall Plate Specifications: Length: 11-1/2" For Rinnai Certified Installation: Contact Rinnai at 844-348-4715

  • Brand: Rinnai
  • ASIN: B006HE6GLA

Z-Flex 4" Universal Appliance Adaptor with Back-Flow Preventer & Condensation Drain (2SVBFDPA04)

Z-Flex 4" Universal Appliance Adaptor with Back-Flow Preventer

Z-Flex Z-Vent 4" Universal Appliance Adaptor with Back-Flow Preventer & Cond Drain (2SVBFDPA04) for Takagi, Paloma, Rheem, Noritz. This Universal Adaptor has seals on both ends (female on both ends and has a back-flow preventer built inand has a built-in condensation drain. The back-flow preventer is useful in colder climates to prevent cold air from flowing back into your heat exchanger where it could cause damage. The condensation drain provides a 3/8" drain point to remove rain water and condensation. The universal adaptor connects the tankless water heater to the 4" Z-Flex Z-Vent Stainless Steel Venting. 4" stainless steel venting for Category III Gas Appliances is the perfect venting option for the Bosch AquaStar 240FX, AquaStar 125FX, Takagi TK1, TK2, TKD20, TKJR, TK1S, TM1 Tankless Water Heaters. Our Z-Flex Z-Vent venting is rated AL29-4C.

  • Brand: Z-Vent
  • ASIN: B00E5P5Z06
  • UPC: 663053031324

Rinnai 224050 45 Degree Plastic Vent Pipe Elbow - Set of 2, N/A

Rinnai 224050 45 Degree Plastic Vent Pipe Elbow

45 Degree Plastic Vent Pipe Elbow - Set of 2 Rinnai's unique Ubbink concentric venting system provides maximum performance, safety, and ease of installation. Compatible with all indoor Rinnai water heater models, except the 98 series which utilizes separate intake and exhaust venting. Plastic Outer Vent For Intake Easy To Cut Compared To Stainless Steel Dent And Impact Resistant Corrosion-Proof Non-Flammable Material (ul94-V0) Seamless Extruded Materials Casted Elbows And Adapters White Semi-Gloss Finish (Eu Ral 9016) Aluminum Inner Vent For Exhaust Easy To Cut Compared To Stainless Steel Stable, Thick-Walled Material Dent And Crease Resistant Not Affected By Scratches Seamless Extruded Material No Weld lines Thick-Walled, Casted Elbows And Adapters Lightweight Seal Rings With Maximum Temperature 400°F (Approx. 200°C) Features: GSA Approved Compatible With All Indoor Rinnai Water Heater Models EXCEPT The R98 Series Used To Get Vent Above Grade Or Snow Condensing Models Zero Clearance To Combustibles Easy Assembly Professional Installation Recommended Includes: (2) 45° Elbows For Rinnai Certified Installation: Contact Rinnai at 844-348-4715

  • Brand: Rinnai
  • ASIN: B004CTU992

4" Z-Vent Adjustable Wall Thimble (4"-7")

4" Z-Vent Adjustable Wall Thimble

Z-Vent 2SVSTWF04 is a 4" adjustable wall thimble and should be used when running the 4" Z-Vent pipe horizontally through a combustible wall. Adjustable for walls with thickness from 4" to 7". Wall plates are 10" x 10". Compatible with Takagi tankless water heater models T-KJr, T-K3, T-K3-SP, T-K3-Pro, T-H1 and T-M32.

  • Color: silver grey
  • Brand: Z-Flex
  • ASIN: B003QSLK2A
  • UPC: 663053019087

Z-Flex Z-Vent 4" Vertical Condensation Drain Tee (2SVEVWCF04)

Z-Flex Z-Vent 4" Vertical Condensation Drain Tee

Z-Flex Z-Vent 4" Vertical Condensation Drain Tee (2SVEVWCF04). This is the best piece to use as a condensation drain point for all vertical venting installations. This drain tee acts as a 90 degree angle, but it has a reservoir and a drain point to easily remove rain water and condensation that may come down the exhaust system. Z-Flex Z-Vent stainless steel vent pipe is ideal for the Bosch Therm 940ES / Bosch Therm 830ES / Bosch Therm 660EF / Bosch AquaStar 2700ES / Bosch AquaStar 2400ES / Bosch Evolution 500 tankless water heaters as well as the legacy Bosch Pro 715ES / Bosch Pro 635ES / Bosch AquaStar 2400E / Bosch AquaStar 250SX heaters as well as the Bosch AquaStar 240FX, AquaStar 125FX, Takagi TK1, TK2, TKD20, TKJR, TK1S, TM1 tankless water heaters. Z-Flex Z-Vent is rated AL29-4C and is approved for Category I (vertical only), II, III & IV applications and is designed for use with boilers, high efficiency gas and oil heaters and water heaters where cool flue gases are vented under pressure. Z-Vent contains a built-in, fail-safe gasket and locking band connection. No sealant is required.

  • Brand: Z-Vent
  • ASIN: B00E5P5HVI
  • UPC: 663053021196

Z-Flex Z-Vent 4" x 6" Stainless Steel Vent Pipe (2SVEPWCF04.5)

Z-Flex Z-Vent 4" x 6" Stainless Steel Vent

Z-Flex Z-Vent 4" x 6" Stainless Steel Vent Pipe (2SVEPWCF04.5). This straight piece of pipe has a silicon gasket and an integral gear clamp on the female end. The male end can be cut to size with a hacksaw. Z-Flex Z-Vent stainless steel vent pipe is ideal for the Bosch Therm 940ES / Bosch Therm 830ES / Bosch Therm 660EF / Bosch AquaStar 2700ES / Bosch AquaStar 2400ES / Bosch Evolution 500 tankless water heaters as well as the legacy Bosch Pro 715ES / Bosch Pro 635ES / Bosch AquaStar 2400E / Bosch AquaStar 250SX heaters as well as the Bosch AquaStar 240FX, AquaStar 125FX, Takagi TK1, TK2, TKD20, TKJR, TK1S, TM1 tankless water heaters. Z-Flex Z-Vent is rated AL29-4C and is approved for Category I (vertical only), II, III & IV applications and is designed for use with boilers, high efficiency gas and oil heaters and water heaters where cool flue gases are vented under pressure. Z-Vent contains a built-in, fail-safe gasket and locking band connection. No sealant is required.

  • Brand: Z-Vent
  • ASIN: B00E5P5AZQ
  • UPC: 663053021127

Rheem RTG20210 3/5-Inch Horizontal Termination Kit for RTG-95DV

Rheem RTG20210 3/5-Inch Horizontal Termination Kit for

This venting kit from Rheem is designed for use with its new indoor models-Inch RTG-64DV, RTG-84DV, and RTG-95DV. Please note that outdoor models do NOT require venting kits. This horizontal venting kit contains a 94-degree elbow, long termination, 12-Inch wall plate, and screws. Model RTG20210.

  • Color: Stainless Steel
  • Brand: Rheem
  • ASIN: B003UTW8J4
  • UPC: 622417853927

Rinnai 222053 Condensate Trap

Rinnai 222053 Condensate

Founded in 1920, Rinnai is built upon a rich history of success in manufacturing high quality water and home heating gas appliances. With an uncompromising resolve for constant improvement, Rinnai has mastered the art in saving homeowners money without sacrificing comfort. Whether you need a home heating furnace, a tankless water heater, or a condensing boiler, Rinnai's heating appliances are carefully engineered to be the most reliable on the market.

  • Color: Black
  • Brand: Rinnai
  • ASIN: B004PYEAXK
  • UPC: 732454657485

4" Z-Vent Rain Cap with Storm Collar

4" Z-Vent Rain Cap with Storm

Z-Vent 2SVSRCF04 is a Category III Stainless Steel, 4" Rain Cap with Storm Collar. Connects directly to 4" Z-Vent pipe. Compatible with Takagi tankless water heater models T-KJr, T-K3, T-K3-SP, T-K3-Pro, T-H1 and T-M32.

  • Brand: Z-Flex
  • ASIN: B003QSLJO4
  • UPC: 663053019124

Noritz VP4-13.4ADJUST 9"-13.4" adjustable vent pipe for 4" Stainless Steel

Noritz VP4-13.4ADJUST 9"-13.4" adjustable vent pipe for 4"

4" Diameter, 9"-13.4" adjustable category III stainless steel vent pipe

  • Color: Iron
  • Brand: Noritz
  • ASIN: B008JG0LYW
  • UPC: 817000011055

Noritz CVP-36STR Concentric 36" straight vent pipe for NR83DVC/ NR98DVC/ NC199DVC

Noritz CVP-36STR Concentric 36" straight vent pipe for

Stainless steel concentric 36" straight pipe for use with NORITZ DVC model heaters

  • Color: Iron
  • Brand: Noritz
  • ASIN: B008JG0UCU
  • UPC: 817000011222

Noritz CVP-40ADJ Concentric 22.8"-40.6" adjustable vent pipe for NR83DVC/ NR98DVC/ NC199DVC

Noritz CVP-40ADJ Concentric 22.8"-40.6" adjustable vent pipe for

Stainless steel concentric vent pipe, adjustable from 22.8"-40.6" for use with NORITZ DVC model heaters

  • Color: Black
  • Brand: Noritz
  • ASIN: B008JG0TNA
  • UPC: 817000011239

Noritz VT4-PVCS Bird screen for 4" PVC Pipe Termination for NRC66/ NRC71/ NRC98/ NRC111/ NCC199/ NRCP982/ NRCP1112

Noritz VT4-PVCS Bird screen for 4" PVC Pipe

Force fits into 4" PVC fitting to prevent bird, squirrel, intake or nesting

  • Color: Silver / Pewter
  • Brand: Noritz
  • ASIN: B008JG0H3M
  • UPC: 817000010829

Takagi TH-NT01 Neutralizer Kit for the T-H2 Tankless Water Heater, N/A

Takagi TH-NT01 Neutralizer Kit for the T-H2 Tankless

Neutralizer Kit for the T-H2 Tankless Water Heater The TH-NT01 (S9007607005) Neutralizer kit helps to neutralize the excess acidic condensate (acidic water). It connects to the condensate drain port of the T-H2-DV/T-H2-OS by using connectors included in the kit. Takagi offers the best in venting products including: Simple Leak-proof gasketed connections (no sealant required), quick and easy- snap-lock connections, high quality-category III stainless steel and horizontal terminations. They also have sliding adjustable pieces and convenience-Neutralizer kits are available. Features: Cartridge Designed to last for 3 Years Before Replacement Included in Kit: 1/2” FPT X 3/8” MPT Adaptor 3/8” MPT Connection Neutralizer Cartridge Why choose Takagi? Takagi produce some of the most highly efficient tankless water heaters in the industry. With a commitment to innovation and quality, they are constantly creating new technology to keep up with their customers’ ever-changing hot water needs. Takagi sets the bar with the most stringent of durability testing standards for all of our models. For 15 years, Takagi has provided the most eco-friendly, energy-efficient water heating solutions in North America.

  • Brand: TAKAGI
  • ASIN: B006C1PXKS

Noritz SCR3-1 3" Storm Collar Ring for ADJRF34 ONLY

Noritz SCR3-1 3" Storm Collar Ring for ADJRF34

3" Stainless steel  storm collar ring for NORITZ Category III vent pipe

  • Color: Iron
  • Brand: Noritz
  • ASIN: B008ORBOQU
  • UPC: 817000012823
Similar Al29 4c Vent Pipe Shopping Results