PLATANUS - 41 Pieces Set - Irrigation Fittings Kit for 1/2'' Tubing (16mm, 0.520"ID)- 10 Tees, 10 Couplings, 10 Elbows, 10 Tubing End and 1 Switch Valve - Barbed Connectors for Drip Irrigation Systems

PLATANUS - 41 Pieces Set - Irrigation Fittings

Irrigation Fittings Kit for 1/2" Tubing 41 PIECE SETEvery Drip Irrigation System Depends on Reliable, Leak-Free Connection Fittings to Keep the System Together.Package includes:✔10 Tees - This universal barbed "Tee" is designed to quickly and easily connect three lengths of 1/2" Drip tubing in a "T" shape. ✔10 Couplings - This universal barbed coupling is designed to quickly and easily connect two lengths of 1/2" Drip tubing in a straight line. ✔10 Elbows - Quickly and easily connect two lengths of 1/2" drip tubing in an "L" or 90 degree shape with this barbed elbow. ✔10Figure Eight Line End Closures - It is easy to install and is used for closing off the ends of 1/2 inch irrigation drip line. These drip tube fittings remove easily for drip sprinkler irrigation system winterization and to flush your dripper system. ✔ 1 Switch Valve - Turn on or turn off the dripline with the switch valve.Product Specifications:1. Compatible with all 1/2" blank tubing or drip lines. 2. One-piece construction. 3. Made from linear, low-density polyethylene. UV resistant high impact plastic4.Secure and easy installation without glue, tools, or clamps. 5. Recommended for 0 to 50 PSI operating pressure. 6. Barbed ends grab tubing for a secure leak-proof connection.  Installation Tip...

  • Brand: PLATANUS
  • ASIN: B07T7XTT7C

Rain Bird BC25-30PS Drip Irrigation Universal 1/4" Barbed Coupling Fitting, Fits All Sizes of 1/4" Drip Tubing, 30-Pack

Rain Bird BC25-30PS Drip Irrigation Universal 1/4" Barbed

Rain Bird BC25-30PS Drip Irrigation Universal 1/4" Barbed Coupling Fitting, Fits All Sizes of 1/4" Drip Tubing, 30-Pack. This barbed coupling fitting quickly connects two pieces of 1/4" Drip irrigation tubing in a straight line, or taps into the side of 1/2" or larger Drip irrigation tubing. Accepts all sizes of 1/4" Drip tubing and provides a durable, leak-tight connection. Unique barb design reduces insertion force and natural color blends with all earth tones. To extend water flow to individual plants: connect 1/4" Drip tubing to one end and insert self-piercing barbed end into 1/2" diameter or larger Drip tubing. Constructed of highly durable UV and chemical-resistant materials to assure long life. May be used above or below ground. Simple to insert by hand or use one of Rain Bird’s insertion tools: ET/1PK25S, HPUN1-1S, HPTCX, (sold separately) for faster installation in larger projects. Designed for working pressure of 0-50 psi. Couplings come in a convenient re-sealable zip-lock bag for organization and ease of identification. ** Sold separately in 10-pack as model number BC25-10PS. Rain Bird “The Intelligent Use of Water”From the Manufacturer Rain Bird Corporation is a privately held company founded in 1933 during the agricultural boom in California. We’re recogniz...

  • Brand: Rain Bird
  • ASIN: B0049C911O
  • UPC: 077985007911

Kalolary Irrigation Fittings Kit, Drip Irrigation Barbed Connectors for 1/4-Inch Flower Vegetable Garden Lawn Water Hose Connectors(80 Straight Barbs+60 Tees+20 Elbows+20 End Plug+20 4-Way Coupling)

Kalolary Irrigation Fittings Kit, Drip Irrigation Barbed Connectors

Features: - Brand-new and high-quality - Convenient and easy to install, securely connected, not easy to fall off - Made of durable and practical material, strong, water resistant,chemical-resistant materials to assure long life. - Work with all kinds of watering drip irrigation systems efficiently - A great tool for greenhouse, garden, lawn, flower beds, shrubs, trees irrigation. Functions: 4-way Coupling - Create four-way layouts of poly tubing or drip line with 4 way coupling. Tees - Create three-way layouts of poly tubing or drip line with barbed tees. Couplings - Create two way layouts of poly tubing or dripline with barbed couplings. Elbows - Create 90 degree layouts of poly tubing or dripline with barbed elbows. End Closures - Plug the end of your poly tubing or dripline with these drip irrigation end caps. Specification: Material: Plastic Color: Black Caliber: 4/7mm Quantity: 200Pcs Packing List: 80 x Straight Barbs  60 x Tube Tees  20 x Elbows Fittings 20 x  End Plug 20 x 4-way Coupling  Kalolary Guaranteed: If you are not 100% completely satisfied with your drip irrigation parts, 24 hours customer service support,we will give you a free replacement or refund. Please enjoy your shopping.

  • Brand: Kalolary
  • ASIN: B07NX897V8
  • UPC: 669819171891

RAINPAL RBIO125F Rain Barrel Inlet Outlet DIY Kit (HDPE Fine 2" Bung to 1-1/4" Barbed Fitting and Brass Ball Valve Spigot w/Bulkhead Fitting)

RAINPAL RBIO125F Rain Barrel Inlet Outlet DIY Kit

Installation Instructions: Tools Needed: 1-1/4 inch saw, Power drill, Knife, Pipe Wrench and Thread Tape 1. Center the hole saw drill bit 3-12 inch above the bottom of the barrel (lower position makes you use most of the water, higher position keeps more water and make barrel more stable, higher position also make it easy to dispense the water without using a stand). Drill 1-1/4 inch hole on rain barrel(use eye protection when operating power tool). Then remove any debris, and use a knife to smooth the edges. 2. If your barrel has an open top, you can install the fitting with nut inside or outside. If your barrel has a small opening like a bung hole on top: Drop the bulkhead fitting male piece with the gasket. Roll the barrel; pick up the fitting through the hole you drilled from outside. Or to prevent the gasket from separating from the fitting, you can hook the fitting with a wire, and then run the wire down to the drilled hole. 3. Install the bulkhead fitting nut, turn counter clockwise to tighten, after hand tight, use a pipe wrench to tighten a bit more. 4. Wrap the BASE of spigot threads with Teflon tape (5 rounds) and install the spigot clockwise. If the spigot is not in a desired position, loosen the fitting nut, turn the spigot to the right position then tighten the f...

  • Brand: RAINPAL
  • ASIN: B01NCHRD2Y
  • UPC: 681441045883

Rain Bird BE50/4PK Drip Irrigation Universal Barbed Elbow Fitting, Fits All Sizes of 5/8", 1/2", .700" Drip Tubing, 4-Pack

Rain Bird BE50/4PK Drip Irrigation Universal Barbed Elbow

Rain Bird BE50/4PKS Drip Irrigation Universal Barbed Elbow Fitting, Fits All Sizes of 5/8", 1/2", .700" Drip Tubing, 4-Pack. This universal barbed elbow is designed to quickly and easily connect two lengths of 1/2" Drip tubing in an "L" shape. High quality barbs grab all brands of 5/8", 1/2", and .700" Drip tubing creating a fast, secure, leak-proof connection that stays in place season after season. The perfect choice to repair or extend tubing in a Drip irrigation system. Unique barb design reduces insertion force and natural color blends well with all earth tones. Constructed of highly durable UV and chemical-resistant materials to assure long life. Recommended operating pressure: 0 to 50 psi. Convenient plastic bag contains (4) elbows. Rain Bird "The Intelligent Use of Water" From the Manufacturer Rain Bird Corporation is a privately held company founded in 1933 during the agricultural boom in California. We’re recognized as the #1 manufacturer and provider of irrigation products and services in the world. With sales offices around the globe; we offer over 4,000 water-saving irrigation products in more than 130 countries. Since the very beginning, Rain Bird has produced and offered the industry’s broadest range of high-quality irrigation products for: farms, golf courses,...

  • Color: Tan
  • Brand: Rain Bird
  • ASIN: B001B3PI1G
  • UPC: 043965993468

Kalolary Barbed Connectors Drip Irrigation, 1/4" Universal Barbed Tee Fittings 100pcs, Fits 1/4" Drip Tubing (4/7mm Tee Pipe)

Kalolary Barbed Connectors Drip Irrigation, 1/4" Universal Barbed

Features: Quickly and easily connect 1/4" drip tubing in a "T" shape with these barbed fittings. Great for watering potted plants. Made of high quality engineering plastics,Durable, strong, water resistant High quality barbs grab tubing creating a fast, and secure leak-proof connection.Easy to install, securely connected, not easy to fall off Specification: Material: Plastic Color: Black Size: About. 3.50 * 2.00 * 0.4 cm / 1.40 * 0.80 * 0.16 inch (L * W * H). Package included 100 x 1/4"Barbed Tee Fitting Notes: 1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2,Please allow 1-2mm differences due to manual measurement. Please contact us first if you have any problem,we will give you the best service and solve the problem ASAP.Thank you so mu

  • Color: 4/7mm Tee Pipe
  • Brand: Kalolary
  • ASIN: B07PQG3G5B
  • UPC: 669819173130

Lifegard Aquatics 1/2-Inch Bulkhead Fitting Kit

Lifegard Aquatics 1/2-Inch Bulkhead Fitting

Custom installations are easier and safer with all parts included in this convenient 1/2-inch Slip kit Assembly.

  • Brand: Lifegard Aquatics
  • ASIN: B002DVWOIA
  • UPC: 788379305550

Irrigation Fittings Kit for 1/2" Tubing 20 PIECE SET - 5 Tees, 5 Couplings, 5 Elbows, 5 End Cap Figure 8 Plugs - Barbed Connectors (For Rain Bird 16mm .520 ID and Compatible Drip or Sprinkler Systems)

Irrigation Fittings Kit for 1/2" Tubing 20 PIECE

Every drip irrigation system depends on reliable, leak-free connection fittings to keep the system together. Your 20-Piece One Stop Outdoor Irrigation Fittings Kit contains: 5 Tees - (three-way connector). 5 Couplings - (Create two way connections of poly tubing or dripline). 5 Elbows - Perfect for making exact corners or 90 degree turns. 5 - Figure Eight Line End Closures - Used to plug the end of your poly tubing. Product Specifications: For connecting emitterline and polyethylene tubing Use with 16mm emitterline and distribution tubing. One piece construction UV resistant high impact plastic Secure and easy installation without glue or clamps Operating pressure: up to 30 PSI Installation Tips: Push the tubing as far ver the barbed ends as possible. It should be a very secure fit. It should be nearly impossible (relatively speaking) to pull the tubing back off by hand. It is recommended to let the tubing heat up in the sun before installation to soften and make it more maneuverable. If your system runs at a high PSI (over 25psi) you may want to consider regulating pressure or using clamps over the fittings to be sure you will not have any blow outs or leaking issues.

  • Color: Black
  • Brand: One Stop Outdoor
  • ASIN: B07G2RGG2F
  • UPC: 032748660222

Rain Bird BC50/5PK Drip Irrigation 1/2" Barbed Coupling Fitting, 5-Pack x 2

Rain Bird BC50/5PK Drip Irrigation 1/2" Barbed Coupling

Connector for use with 1/2" drip irrigation tubing

  • Brand: Rain Bird
  • ASIN: B01AULE30Q

Hayden Automotive 390 Transmission Line Fitting Kit

Hayden Automotive 390 Transmission Line Fitting

The kit allows for auxiliary transmission cooler installation without cutting OE lines and also simplifies transmission cooler installation.

  • Brand: Hayden Automotive
  • ASIN: B000EPOLQU
  • UPC: 036752003907

HIRALIY Drip Irrigation Fittings Kit 1/2" Tubing 33 Piece Set - 1 Switch Valve, 8 Tees, 8 Couplings, 8 Elbows, 8 End Cap Plugs- Barbed Connectors and Compatible Drip or Sprinkler Systems

HIRALIY Drip Irrigation Fittings Kit 1/2" Tubing 33

HIRALIY Drip Irrigation Fittings Kit 1/2" Tubing 33 Piece Set 33-Piece HIRALIY Irrigation Fittings Kit contains ✔1 Switch Valve - Turn on/off drip line. ✔8 Tees - Create three-way layouts of poly tubing or drip line with barbed tees. ✔8 Couplings - Create two way layouts of poly tubing or dripline with barbed couplings. ✔8 Elbows - Create 90 degree layouts of poly tubing or dripline with barbed elbows. ✔8 Figure Eight Line End Closures - Plug the end of your poly tubing or dripline with these drip irrigation end caps. Installation Tips ✔To use the fittings with drip tubing, push the tubing very firmly over the barbed side of the connector, tee, or elbow for a very tight fit that won't leak. ✔Soften the tubing before installing the fitting, you can let the tubing rest in the hot sun or briefly apply a heat gun or blow dryer to the tubing end before inserting the fitting. ✔If your system runs at a high PSI (over 25psi) you may want to consider regulating pressure or using clamps over the fittings to be sure you will not have any blow outs or leaking issues.

  • Brand: HIRALIY
  • ASIN: B07SWXQS1Q
  • UPC: 749235479549

Part Kit Pipe Air Adapter 1PCS 1/8" NPT X 1/4" HOSE Nose Nipple BRASS Fitting STRAIGHT FITTING FUEL LINE, AIR LINE, Hose Barbed Fitting - Adapter Reducer Air

Part Kit Pipe Air Adapter 1PCS 1/8" NPT

1/8" NPT X 1/4" HOSE BARB BRASS STRAIGHT FITTING FUEL LINE, AIR LINE, Adapter for connecting a hose to a male threaded connection of a different diameter Hose barb on one end and male threads on the other Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

  • Color: Brass
  • Brand: Lapha'
  • ASIN: B07FMFXFDH
  • UPC: 632806103120

Maitys Irrigation Fittings Kit for Tubing 32 Piece Set, 8 Tees, 8 Couplings, 8 Elbows and 8 End Cap Plugs Barbed Connectors for Drip Sprinkler Systems, Garden, Patio, Lawn or Flower Bed (1/2 Inch)

Maitys Irrigation Fittings Kit for Tubing 32 Piece

Package includes: 8 Tees: create three-way layouts of poly tubing or drip line with barbed tees. 8 Couplings: create two way layouts of poly tubing or drip line with barbed couplings. 8 Elbows: create 90 degree layouts of poly tubing or drip line with barbed elbows. 8 Figure Eight Line End Closures: Plug the end of your poly tubing or drip line with these drip irrigation end caps. Features: 1. Compatible with all 1/2 inch 16 mm tubing or drip lines. 2. UV resistant high-impact plastic. 3. Made from linear, low-density polyethylene. 4. Secure and easy installation without glue, tools, or clamps. 5. Recommended for 0 to 50 PSI operating pressure. 6. Barbed ends grab tubing for a secure leak-proof connection. Installation Tips: 1.To use the fittings with drip tubing, push the tubing very firmly over the barbed side of the connector, tee, or elbow for a very tight fit that won't leak. 2.Soften the tubing before installing the fitting, you can let the tubing rest in the hot sun or briefly apply a blow dryer to the tubing end before inserting the fitting.

  • Brand: Maitys
  • ASIN: B07RWJ4M76
  • UPC: 797550510140

Yamlion Drip Irrigation Fittings Kit, Irrigation Barbed Connectors for 1/2" Tubing 34 Piece - 2 Switch Valves, 8 Couplings, 8 Tees, 8 Elbows and 8 End Cap Plugs, Irrigation Water Hose Connector

Yamlion Drip Irrigation Fittings Kit, Irrigation Barbed Connectors

The drip irrigation fitting kits are the best choice for building your drip irrigation systems for your garden, flower bed, patio, lawn Feature: 1.Our Drip Irrigation Kit is made of environmentally friendly UV resistant high-impact plastic and inexpensive with large quantity. The various kits meet your entire Drip Irrigation Systems 2.Compatible with all 1/2 inch 16 mm irrigation tubing (.520-.540" ID) 3.The barb design facilitates the close fitting of the drip connector to the hose to prevent leakage 4.The hose connector can be easily installed without any additional tools. A great solution for indoor appliances and outdoor gardens Specifications: Material: UV resistant high-impact plastic Color: black Size:as the picture 3 Fits:1/2 inch irrigation tubing (16mm .520-.540" ID) Package Includes: Total 34 Pieces 2xSwitch Valves 8xCouplings 8xTees 8xElbows 8xEnd Cap Plugs Notes: 1.Soften the tubing before installing the fittings, you can let the tubing rest in the hot sun, or briefly bake with a heat gun or blower before inserting the fitting 2.You'd better measure the tubing and hose inner diameter. Make sure the size and accessories are suitable

  • Color: Black
  • Brand: Yamlion
  • ASIN: B07TCMNJM1

Habitech Irrigation Fittings Kit for 1/2" Tubing 20 Piece Set - 6 Tees, 6 Couplings, 2 Elbows, 6 End Cap Plugs - Barbed Connectors for Rain Bird and Compatible Drip or Sprinkler Systems

Habitech Irrigation Fittings Kit for 1/2" Tubing 20

Every drip irrigation system depends on reliable, leak-free connection fittings to keep the system together. Your 20-Piece Habitech Irrigation Fittings Kit contains: 6 Tees - Create three-way layouts of poly tubing or drip line with barbed tees. 6 Couplings - Create two way layouts of poly tubing or dripline with barbed couplings. 2 Elbows - Create 90 degree layouts of poly tubing or dripline with barbed elbows. 6 Figure Eight Line End Closures - Plug the end of your poly tubing or dripline with these drip irrigation end caps. Product Specifications: For connecting emitterline and polyethylene tubing Use with 17mm emitterline and distribution tubing Economical one piece construction UV resistant high impact plastic Secure and easy installation without glue or clamps Operating pressure: up to 50 PSI Installation Tips: To use the fittings with drip tubing, push the tubing very firmly over the barbed side of the connector, tee, or elbow for a very tight fit that won't leak If you wish to soften the tubing before installing the fitting, let the tubing rest in the hot sun or briefly apply a heat gun or blow dryer to the tubing end before inserting the fitting If your system runs at pressures higher than 25 PSI, you may want to use ratchet clamps to secure the tube on...

  • Brand: Habitech
  • ASIN: B07CYX6BGH
  • UPC: 600151081653

iRunning 18 Pieces Irrigation Fittings Kit (17mm) for 1/2" Tubing (0.600"ID) - Including 6 Tees, 6 Couplings, 6 Elbows - Barbed Connectors for Sprinkler and Drip Irrigation Systems

iRunning 18 Pieces Irrigation Fittings Kit (17mm) for

Irrigation Fittings Kit for 1/2" Tubing 18 PIECE SET

  • Brand: iRunning
  • ASIN: B07SM4LK24
  • UPC: 799649038542

URATOT 40 Pieces Drip Irrigation Fittings Kit 1/2" Tubing Set, 10 Tees, 10 Couplings, 10 Elbows and 10 End Cap Plugs Drip Irrigation Barbed Connectors for Drip Sprinkler Systems

URATOT 40 Pieces Drip Irrigation Fittings Kit 1/2"

Specifications: Material: plastic Color: black Size: compatible for 1/2 inch pipe Quantity: 40 pieces Package includes: 10 x Tees 10 x Couplings 10 x Elbows 10 x End Cap Plugs

  • Brand: URATOT
  • ASIN: B07SB5PP7G

iRunning 18 Pieces Irrigation Couplings Fittings (17mm) for 1/2" Tubing (0.600"ID) - Barbed Connectors for Sprinkler and Drip Irrigation Systems

iRunning 18 Pieces Irrigation Couplings Fittings (17mm) for

Irrigation Fittings Kit for 1/2" Tubing 18 PIECES Coupling Set

  • Brand: iRunning
  • ASIN: B07T29KP8W
  • UPC: 799649038566

Arfun Drip Irrigation Fittings Kit for 1/2" Tubing (17mm .600 ID), 18 Pieces Set - 6 Tees, 6 Couplings, 6 Elbows - Barded Connectors for Rain Bird Pipe and Sprinkler Systems

Arfun Drip Irrigation Fittings Kit for 1/2" Tubing

Arfun 18 Pieces Drip Irrigation Fittings Kit

  • Brand: Arfun
  • ASIN: B07SD34GBD
  • UPC: 799649038504

Arfun 20-Pack Drip Irrigation Barbed Coupling Fittings, Fits of 1/2", 17mm .600" ID Drip Tubing

Arfun 20-Pack Drip Irrigation Barbed Coupling Fittings, Fits

Arfun 20-Pieces Drip Irrigation Couplings Fittings Kit

  • Color: Couplings
  • Brand: Arfun
  • ASIN: B07S7VBHR2
Similar Barbed Fitting Kits Shopping Results