R&L Racing AF Dynamic Black Air Filter Intake Systems 3.5" Pipe with Heat Shield 2013-2016 for Honda Accord/Acura TLX 3.5L V6

R&L Racing AF Dynamic Black Air Filter Intake

Can be installed in 30-45 minutes with simple hand tools; NO Drilling, NO Cutting, NO Fabrication Required! The Cold Air Intake System comes complete with everything necessary for installation, including comprehensive step by step instructions. AF-Dynamic Cold Air Intake Kit complete with high-flow air filter and aluminum heatshield with insulation mat. The intake kit not only increases power, but will also provide better engine response compared to your restrictive stock air intake box. The included reflective insulation mat material, when added to the heatshield, further reduces intake temperatures and heat soak from the engine bay. Features: · Replaces OEM filter and air box with 100% New Quality Parts! · Uses only top-quality stainless steel button head bolts, washers, locknuts and band clamps. · Uses only high quality silicone coupler, elbow and hoses “NOT CHEAP RUBBER” · Works with Original Equipment Manufacturer computer systems. · Helps engine to more efficiently draw in colder air, resulting in better throttle response and consistently higher horsepower output. · Improves up to 95% filtration efficiency over OEM paper filters. · Increases of 5 to 10 horsepower, 6 to 8 percent of Torque, and improved gas mileage of your vehicle. · Intense deep sporty sound...

  • Brand: R&L Racing
  • ASIN: B01J98DJZG
  • UPC: 646263381670

For 2003-2007 Honda Accord (3.0L V6 Engine Only) 3 Inch Aluminum High Flow Cold Air Intake System Black Pipe with Air Filter Red

For 2003-2007 Honda Accord (3.0L V6 Engine Only)

Item Specifications:100% Brand New, Really High QualityHigh quality aluminum piping for extra performancePulls cooler denser air from inside the inner fender well to make more power and save gasComes with Intake Piping, Air Filter, Hose, Couplers, Clamps, & Brackets & Heat ShieldThe Reuse Of Sensors Some Current Brackets May Be RequiredGuaranteed added horsepower!Comes with FilterThis Item Is Intended For Off Road Use Only - No C.A.R.B StickerInstallation instructions are not includedFitments:2003-2007 Honda Accord 3.0L V6 Model Only

  • Brand: Morakot Racing
  • ASIN: B07KTRPLDY
  • UPC: 754472872084

R&L Racing 3" BLACK JDM Cold Air Intake Racing System + Filter 08-12 For Accord 2.4L L4

R&L Racing 3" BLACK JDM Cold Air Intake

T-306 Aluminum High Quality Finished Intake pipe as shown in the picture High quality built Washable and Reusable Air Filter as shown in the picture All necessary mounting hardwares, vacuum hoses and reducers will be included like shown in the picture MAF sensor adapter (This will be included only if your car needs one for installation, some cars may not need it) A General Installation instruction will be included, but if you need more help, email us and we'll gladly to help

  • Color: Black
  • Brand: R&L Racing
  • ASIN: B01MG2EH9O
  • UPC: 648620102911

aFe (TR-1019B) Takeda Stage-2 Cold Air Intake System for Honda Accord

aFe (TR-1019B) Takeda Stage-2 Cold Air Intake System

The all new Takeda Retain Intake System produces up to 9 horsepower and 9 pound x feet of torque over stock, while outflowing the factory intake by 24 percentage. This intake includes both an oiled Pro 5R and an oil-free Pro Dry S air filter for maximum value. This gives the customer the option to run which ever filter desired, oiled or oil-free. A one-piece powder-coated heat shield is used to protect the filter from unwanted hot engine air for maximum performance. Takeda intakes come complete with all necessary hardware. Tuned intake tube: A dyno tuned wrinkle black powder-coated intake tube is used to smoothly direct the airflow into the engine with minimal restriction factory mounting locations: The use of factory mounting locations ensures a quality fit while maintaining a simple, hassle free installation. Heat shield: Included in this kit is a powder coated heat shield which protects the filter from unwanted hot engine air for maximum performance. Silicone coupling: A reinforced silicone coupling is used to connect the tube to the throttle body for strength and durability.

  • Brand: aFe Power
  • ASIN: B00FM2HZ5E
  • UPC: 802959520918

aFe TR-1007B Takeda Cold Air Intake System for Honda Accord/Acura TL

aFe TR-1007B Takeda Cold Air Intake System for

The Takeda cold air intake system is made of an aluminum tube with a wrinkle-black, powder-coated finish. There is no cutting required, and a Takeda Pro DRY S Filter and all necessary hardware is included. Also included is a wrinkle-black shield that diverts hot air away from the filter and a injection molded three angled adaptor to help speed up the air. Takeda cold air intake systems are dyno tested vs. stock and flow tested vs. stock to measure and document increases in horsepower, torque and air flow. This cold air intake produced 14hp and 14 lbs. x ft. of torque to the wheels

  • Brand: aFe Power
  • ASIN: B002QFF3KO
  • UPC: 802959520390

PRL Motorsports Stage 1 Intake System Black for 2018+ Honda Accord 2.0T

PRL Motorsports Stage 1 Intake System Black for

No Tuning Required!We saw increased spool, 16 hp gains at peak and as much as 18 hp gains throughout the midrange!3D scanning and silicone technology has allowed us to offer a stock replacement intake hose that is better looking, more durable and out performs the corrugated OEM intake hose. Our silicone intake hose is constructed of the same high quality 4-ply silicone as the rest of our couplers and features a perfectly smooth-finish transition for optimal air flow. The pleats found in the OEM hose disrupts air flow, which limits power potential and throttle response.Why use a PRL Motorsports air filter?Our oiled filters are constructed from high quality, double layer cotton to increase the filtration surface by 10% - 15%. This causes air to move freely while maintaining superior filtration, trapping particles as small as 5 microns! The cotton filter is encased by coated steel mesh to ensure your PRL Motorsports air filter withstands the toughest of conditions!Each filter is hand-molded using a flexible rubber base to ensure an airtight seal and absorb vibration. These filters do not use pressure-molding like other manufacturers, which can cause the rubber to seep into the filter element blocking airflow by up to 25%! Our air filters utilize a precision four-step process to virt...

  • Brand: PRL Motorsports
  • ASIN: B07SH2QTJX
  • UPC: 689750195213

R&L Racing 3" BLACK JDM Cold Air Intake Racing System + Filter 08-12 For Accord 2.4L L4

R&L Racing 3" BLACK JDM Cold Air Intake

T-306 Aluminum High Quality Finished Intake pipe as shown in the picture High quality built Washable and Reusable Air Filter as shown in the picture All necessary mounting hardwares, vacuum hoses and reducers will be included like shown in the picture MAF sensor adapter (This will be included only if your car needs one for installation, some cars may not need it) A General Installation instruction will be included, but if you need more help, email us and we'll gladly to help

  • Color: Black
  • Brand: R&L Racing
  • ASIN: B074RBFTLX
  • UPC: 653451767109

For 2008-2012 Honda Accord (3.5L V6 Engine Model Only) 3 Inch Aluminum High Flow Cold Air Intake System Black Pipe with Air Filter Red

For 2008-2012 Honda Accord (3.5L V6 Engine Model

Item Specifications:100% Brand New, Really High QualityHigh quality aluminum piping for extra performancePulls cooler denser air from inside the inner fender well to make more power and save gasComes with Intake Piping, Air Filter, Hose, Couplers, Clamps, & Brackets & Heat ShieldThe Reuse Of Sensors Some Current Brackets May Be RequiredGuaranteed added horsepower!Comes with FilterThis Item Is Intended For Off Road Use Only - No C.A.R.B StickerInstallation instructions are not includedFitments:2008-2012 Honda Accord (3.5L V6 Engine Model Only)

  • Brand: Morakot Racing
  • ASIN: B07KTQ2KXY
  • UPC: 754472872459

aFe TR-1021B-R Takeda Stage-2 Cold Air Intake System for Honda Accord

aFe TR-1021B-R Takeda Stage-2 Cold Air Intake System

The all new Takeda Retain Intake System produces up to 17HP and 15lbs. x ft. of torque over stock, while outflowing the factory intake by 21 percent . This intake includes both an oiled PRO 5R and an oil-free PRO DRY S air filter for maximum value. This gives the customer the option to run which ever filter desired, oiled or oil-free! A one piece powder-coated heat shield is used to protect the filter from unwanted hot engine air for maximum performance. Takeda intakes come complete with all necessary hardware. Tuned Intake Tube: A dyno-tuned wrinkle-black powder-coated intake tube is used to smoothly direct the airflow into the engine with minimal restriction. Factory Mounting Locations: The use of factory mounting locations ensure a quality fit while maintaining a simple, hassle-free installation. Heat Shield: Included in this kit is a powder-coated heat shield which protects the filter from unwanted hot engine air for maximum performance. Silicone Coupling: A reinforced silicone coupling is used to connect the tube to the throttle body for strength and durability.

  • Brand: aFe Power
  • ASIN: B00F49YX5A
  • UPC: 802959520901

K&N 69-1211TTK 69 Series Typhoon Textured Black Air Intake Kit

K&N 69-1211TTK 69 Series Typhoon Textured Black Air

The K&N 69 Series Typhoon Air Intake System is a free-flowing mandrel-bent aluminum tube induction system designed to fit many sport compact performance vehicles. Typhoon intakes come in one of three designs; cold air intakes (CA), short ram intakes (SR), or complete cold air (CCA) intakes which can be configured as either a cold air intake or a short ram intake. Some Typhoon's have high quality finish options including polished aluminum (part ends with TP), powder coated blue (part ends in TB), powder coated red (part ends in TR), and powder coated silver (ends in TS) among others. K&N intake systems replace your vehicle's restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction allowing more air flow to your engine. More air means more usable power and acceleration throughout the engine's RPM range.

  • Color: Black
  • Brand: K&N
  • ASIN: B002GX9CWG
  • UPC: 024844253217

R&L Racing AF Dynamic Black Cold Air Filter Intake Systems with Heat Shield 2007-2014 for Honda Accord 3.7 V6/Acura TL 3.5/CrossTour

R&L Racing AF Dynamic Black Cold Air Filter

Can be installed in 30-45 minutes with simple hand tools; NO Drilling, NO Cutting, NO Fabrication Required! The Cold Air Intake System comes complete with everything necessary for installation, including comprehensive step by step instructions. AF-Dynamic Cold Air Intake Kit complete with high-flow air filter and aluminum heatshield with insulation mat. The intake kit not only increases power, but will also provide better engine response compared to your restrictive stock air intake box. The included reflective insulation mat material, when added to the heatshield, further reduces intake temperatures and heat soak from the engine bay. Features: · Replaces OEM filter and air box with 100% New Quality Parts! · Uses only top-quality stainless steel button head bolts, washers, locknuts and band clamps. · Uses only high quality silicone coupler, elbow and hoses “NOT CHEAP RUBBER” · Works with Original Equipment Manufacturer computer systems. · Helps engine to more efficiently draw in colder air, resulting in better throttle response and consistently higher horsepower output. · Improves up to 95% filtration efficiency over OEM paper filters. · Increases of 5 to 10 horsepower, 6 to 8 percent of Torque, and improved gas mileage of your vehicle. · Intense deep sporty sound...

  • Brand: R&L Racing
  • ASIN: B01J2JIW18
  • UPC: 646263383582

PRL Stage 1 Air Intake System Black for 2018+ Honda Accord 1.5T

PRL Stage 1 Air Intake System Black for

No Tuning Required!Our oiled filters are constructed from high quality, double layer cotton to increase the filtration surface by 10% - 15%. This causes air to move freely while maintaining superior filtration, trapping particles as small as 5 microns! The cotton filter is encased by coated steel mesh to ensure your PRL Motorsports air filter withstands the toughest of conditions!Each filter is hand-molded using a flexible rubber base to ensure an airtight seal and absorb vibration. These filters do not use pressure-molding like other manufacturers, which can cause the rubber to seep into the filter element blocking airflow by up to 25%! Our air filters utilize a precision four-step process to virtually eliminate rubber seepage and maximize airflow!Kits Include:(1) 4-ply Silicone Hose(3) Stainless Hose Clamps(1) Billet Evap Flange (Anodized Black)(1) Stainless Bracket(2) M6 Bolts for Bracket(1) High Flow Drop-In Air Filter

  • Brand: PRL Motorsports
  • ASIN: B07SH2KR4S
  • UPC: 689750195190

For 1995-1997 Honda Accord (2.7L V6 Only) /1998-2002 Accord (3.0L V6 Only) 2.75 Inch Aluminum High Flow Cold Air Intake System Black Pipe with Air Filter Red

For 1995-1997 Honda Accord (2.7L V6 Only) /1998-2002

Item Specifications:100% Brand New, Really High Quality High quality aluminum piping for extra performance Pulls cooler denser air from inside the inner fender well to make more power and save gas Comes with Aluminum Pipe, Filter and Accessories Direct OEM fitment and comes with everything necessary to install. Guaranteed added horsepower! Comes with 2.75" FilterInstallation instructions are not includedFitment:1995-1997 Honda Accord (2.7L V6 Model Only) 1998-2002 Honda Accord (3.0L V6 Model Only) 2001-2003 Acura CL (3.2L V6 Base Model Only) 1999-2003 Acura TL (3.2L V6 Base Model Only) Note: DOES NOT FIT TYPE-S MODELS

  • Brand: Morakot Racing
  • ASIN: B07KTS2BBK
  • UPC: 754472873388

R&L Racing AF Dynamic Black Cold Air Filter Intake Kit Systems 2013-2016 for Honda Accord 2.4L 4Cyl with Heat Shield

R&L Racing AF Dynamic Black Cold Air Filter

Can be installed in 30-45 minutes with simple hand tools; NO Drilling, NO Cutting, NO Fabrication Required! The Cold Air Intake System comes complete with everything necessary for installation, including comprehensive step by step instructions. AF-Dynamic Cold Air Intake Kit complete with high-flow air filter and aluminum heatshield with insulation mat. The intake kit not only increases power, but will also provide better engine response compared to your restrictive stock air intake box. The included reflective insulation mat material, when added to the heatshield, further reduces intake temperatures and heat soak from the engine bay. Features: · Replaces OEM filter and air box with 100% New Quality Parts! · Uses only top-quality stainless steel button head bolts, washers, locknuts and band clamps. · Uses only high quality silicone coupler, elbow and hoses “NOT CHEAP RUBBER” · Works with Original Equipment Manufacturer computer systems. · Helps engine to more efficiently draw in colder air, resulting in better throttle response and consistently higher horsepower output. · Improves up to 95% filtration efficiency over OEM paper filters. · Increases of 5 to 10 horsepower, 6 to 8 percent of Torque, and improved gas mileage of your vehicle. · Intense deep sporty sound...

  • Brand: R&L Racing
  • ASIN: B01J98DKU0
  • UPC: 646263381687

For 1990-1993 Honda Accord 2.75 Inch Aluminum High Flow Cold Air Intake System Black Pipe with Air Filter Red

For 1990-1993 Honda Accord 2.75 Inch Aluminum High

Item Specifications:100% Brand New, Really High QualityHigh quality aluminum piping for extra performancePulls cooler denser air from inside the inner fender well to make more power and save gasComes with Intake Piping, Air Filter, Hose, Couplers, Clamps, & Brackets & Heat ShieldThe Reuse Of Sensors Some Current Brackets May Be RequiredGuaranteed added horsepower!Comes with FilterThis Item Is Intended For Off Road Use Only - No C.A.R.B StickerInstallation instructions are not includedFitments:1990-1993 Honda Accord

  • Brand: Morakot Racing
  • ASIN: B07KTQSWXW
  • UPC: 754472872282

HPS 27-105WB-2 Black Short Ram Air Intake Kit (Non-CARB Compliant)

HPS 27-105WB-2 Black Short Ram Air Intake Kit

Built for performance and show, the HPS Short ram air intake kit with wrinkle black finish for 2008-2012 Honda accord 2.4l Offers a free-flowing mandrel-bent aluminum tube induction system designed to deliver performance gains while maintaining safe air fuel ratio. HPS short ram air intake has been tested on a rear-wheel dynamometer and shown increase in horsepower and torque. Compare to the cold air intake, HPS short ram air intake is a convenient way to change your intake in case of rainy days where water might be inducted into your cold air system. They come with an K&N high-flow conical air filter designed to provide increased surface area and dust capacity. This extra surface area provides even more airflow at lower restriction than a standard replacement filter that is limited to the size of the factory air box. The oversize air filter also captures more dirt increasing the service life before a cleaning is required (up to 100,000 miles). HPS Short ram air intake systems features: designed for increased performance for your vehicle, utilizing the finest quality components. Proven by dyno to provide more horsepower and increased acceleration. Mandrel-Bent aluminum tube piping for optimal air flow. Includes K&N high-flow, washable/reusable air filter which is backed by millio...

  • Color: Black
  • Brand: HPS
  • ASIN: B00VWXWG1A

R&L Racing AF Dynamic Black Cold Air Filter Intake Kit Systems with Heat Shield 2008-2012 for Honda Accord 2.4L 4Cyl

R&L Racing AF Dynamic Black Cold Air Filter

Can be installed in 30-45 minutes with simple hand tools; NO Drilling, NO Cutting, NO Fabrication Required! The Cold Air Intake System comes complete with everything necessary for installation, including comprehensive step by step instructions. AF-Dynamic Cold Air Intake Kit complete with high-flow air filter and aluminum heatshield with insulation mat. The intake kit not only increases power, but will also provide better engine response compared to your restrictive stock air intake box. The included reflective insulation mat material, when added to the heatshield, further reduces intake temperatures and heat soak from the engine bay. Features: · Replaces OEM filter and air box with 100% New Quality Parts! · Uses only top-quality stainless steel button head bolts, washers, locknuts and band clamps. · Uses only high quality silicone coupler, elbow and hoses “NOT CHEAP RUBBER” · Works with Original Equipment Manufacturer computer systems. · Helps engine to more efficiently draw in colder air, resulting in better throttle response and consistently higher horsepower output. · Improves up to 95% filtration efficiency over OEM paper filters. · Increases of 5 to 10 horsepower, 6 to 8 percent of Torque, and improved gas mileage of your vehicle. · Intense deep sporty sound...

  • Brand: R&L Racing
  • ASIN: B01J98DLQS
  • UPC: 646263381694

For 1994-2002 Honda Accord (L4 4 Cylinder Engines Only) / 1992-2001 Honda Prelude 2.75 Inch Aluminum High Flow Cold Air Intake System Black Pipe with Air Filter Red

For 1994-2002 Honda Accord (L4 4 Cylinder Engines

Item Specifications:100% Brand New, Really High QualityHigh quality aluminum piping for extra performancePulls cooler denser air from inside the inner fender well to make more power and save gasComes with Intake Piping, Air Filter, Hose, Couplers, Clamps, & Brackets & Heat ShieldThe Reuse Of Sensors Some Current Brackets May Be RequiredGuaranteed added horsepower!Comes with FilterThis Item Is Intended For Off Road Use Only - No C.A.R.B StickerInstallation instructions are not includedFitments:1994-2002 Honda Accord 4CYL / 1992-2001 Honda Prelude

  • Brand: Morakot Racing
  • ASIN: B07KTQGHQB
  • UPC: 754472872268

HPS 27-555WB Black Shortram Air Intake Kit (Cool Short Ram SRI with Heat Shield)

HPS 27-555WB Black Shortram Air Intake Kit (Cool

Built for performance and show, the HPS Wrinkle Black short ram air intake with heat shield for 2013-2016 Honda Accord 2.4L (27-555WB) offers a free-flowing mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains +5.2 Whp horsepower, +6.2 Ft/lbs.. torque and improve throttle response while maintaining safe air fuel ratio. The heat shield included in the kit maximize the cooling effect. Compare to the cold air intake, HPS short ram cool air intake is a convenient way to change your intake in case of rainy days where water might be inducted into your cold air system. The included installation instruction has clear pictures and description to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS short ram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps, which ensure the durability and reliability during the extreme driving condition. The included K&N High-Flow conical air filter designed to provide increa...

  • Color: Wrinkle Black
  • Brand: HPS
  • ASIN: B018WG4C8E
  • UPC: 648044846309

AEM 22-416R Short Ram Intake System with Black Air Filter Wrap

AEM 22-416R Short Ram Intake System with Black

  • Brand: AEM
  • ASIN: B07FWCNLVZ
Similar Black Accord Intake System Shopping Results