Borla 11795 Rear Section Exhaust System Kit

Borla 11795 Rear Section Exhaust System

Borla performance industries has a grand heritage with Jeep exhaust cat-backs and headers. The performance is legendary and the durability just what these recreation vehicles need. If you are into getting out in the back-country, these new Jeeps are the ticket. If you live in country where the elements include severe weather, this could be your everyday driver. Borla has introduced a pair of impressive exhaust rear sections. The rear-sections connect to the factory mid-pipe. Choose from the split rear dual system or the single exit. Both systems increase power, decrease weight, include handsome polished stainless steel Borla tips and add durability. Couple all this with the great Borla sound of power, and you just want to jump in and go for a ride. Borla, the original pioneers of high quality, austenitic stainless steel (superior to 409 or aluminized steel) free-flow exhaust utilizes patented award and race winning technology to deliver quality, sound, performance gains and enhanced fuel economy, all with an easy bolt-on installation. And backed by an unsurpassed written million-mile warranty.

  • Brand: Borla
  • ASIN: B0046ZIW0U
  • UPC: 808422117951

BORLA 11836 Rear Section Exhaust Touring System for Ford Mustang GT/Boss 302

BORLA 11836 Rear Section Exhaust Touring System for

Custom Sound Tuning Technology. Straight Thru Muffler Design. Added Performance. Distinctive Motorsport Styling. Easy Bolt On Installation. Enhanced Fuel Economy. Million Mile Warranty.

  • Brand: Borla
  • ASIN: B00CWZRJ14
  • UPC: 808422118361

Borla 11834 Rear-Section Exhaust System for Jeep Wrangler

Borla 11834 Rear-Section Exhaust System for Jeep

Rear section dual tip exhaust for the 2012-2013 Wrangler. Improves sound and performance with custom tuned Borla mufflers and mandrel bent stainless steel pipes.

  • Brand: Borla
  • ASIN: B00BWM0VZO
  • UPC: 808422118347

Borla 11775 Rear Section Exhaust Kit - CAMARO '10 6.2L V8 AT/MT RWD 2DR

Borla 11775 Rear Section Exhaust Kit - CAMARO

Borla rear section exhaust installs using the factory clamp-on connection just before the rear muffler assembly. Borla, the original pioneers of high quality, austenitic stainless steel (superior to T-409 or aluminized steel) free flow exhaust utilizes its patented award and race winning technology to deliver quality, sound, performance gains and enhanced fuel economy – all with an easy bolt-on installation. All Borla street products carry the famous Borla written million-mile warranty. This exhaust kit has a piping diameter of 2.5 inches and a split rear exit. It also features a single round rolled angle cut style tip of size 4.5 inches round x 5.75 inches and an 'S-type' muffler.

  • Brand: Borla
  • ASIN: B002LFIQ80
  • UPC: 808422117753

BORLA 11843 Rear Section Exhaust System for Subaru Impreza/XV Crosstrek

BORLA 11843 Rear Section Exhaust System for Subaru

A Borla "Axle Back" or rear section exhaust implies the exhaust system is located behind the vehicle rear axle . Most installations are completed in less than an hour and require no cutting of the factory system. A Borla Axle Back performance exhaust is a less restrictive aftermarket exhaust system that will improve the sound level both inside the cabin and exterior. Borla Axle Back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year/make/model vehicle.

  • Brand: Borla
  • ASIN: B00JXTXB96
  • UPC: 808422118439

BORLA 11840 Rear Section Exhaust

BORLA 11840 Rear Section

Rear Section.

  • Brand: Borla
  • ASIN: B00FVA4IAW
  • UPC: 808422118408

Borla 11813 Rear Section Kit

Borla 11813 Rear Section

This Rear Section Kit fits Scion tC 2.5L AT/MT four wheel drive 2 door. It features single oval rolled angle cut and rear exit. Has a 2.25 inch piping diameter and 4.25 inch x 3.5 inch oval x 6.75 inch tip size.

  • Brand: Borla
  • ASIN: B005OBLRCA
  • UPC: 808422118132

BORLA 11853 Rear Section Exhaust Touring System for Honda Accord

BORLA 11853 Rear Section Exhaust Touring System for

NOTE: for 2.4L engines, vehicle must have factory dual exhaust. Will NOT fit single exhaust Touring Rear Section Exhaust System (11853) by Borla, MILD GROWL SOUND, Single Split Rear Exit. 4.5" Inlet / 3.5" Outlet Single Oval Rolled Angle-Cut Tip. 2" Tubing. When you want the best performing, best sounding, and highest quality exhaust system, you want Borla. Borla straight-through mufflers and mandrel-bent exhaust tubes are custom tuned to deliver the most horsepower possible, with a subtle, slightly louder than stock sound at cruise. And the quality, aircraft-grade, austenitic stainless steel construction allows Borla to back every Rear Section system with an unequaled million-mile warranty. Features: Mild Growl Sound Increased exhaust flow for better performance Horsepower and torque increased by 7 - 10% Better fuel economy at cruising speeds Slightly louder than stock at cruise with a more aggressive sound during acceleration Custom designed for each application Patented straight-through muffler design reduces backpressure while absorbing sound waves Mandrel-bent stainless steel tubes with diameters optimized for reduced restriction while maintaining exhaust gas speed Made from the finest austenitic stainless steel for long-lasting durability All welded construction Includes po...

  • Brand: Borla
  • ASIN: B00IRUCMCE
  • UPC: 808422118538

BORLA 11796 S-Type Rear Section Exhaust

BORLA 11796 S-Type Rear Section

Rear Section.

  • Brand: Borla
  • ASIN: B0060EGXTC
  • UPC: 808422117968

Borla 11804 Rear Section Exhaust Kit

Borla 11804 Rear Section Exhaust

Borla Cat-Back exhausts feature patented, straight-through and multi-core technology to unleash hidden horsepower. It's increased exhaust velocity adds power, driving excitement, fuel economy and the distinctive Borla sound of power respected by motoring enthusiasts everywhere. Each system is built from premium austenitic stainless steel, superior to T-400 series knockoffs, to give the absolute performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power. The precision computer-controlled CNC manufacturing ensures an accurate fit. Borla stands behind every system with a Million-Mile warranty.

  • Brand: Borla
  • ASIN: B005GBIU6O
  • UPC: 808422118040
Similar Borla Rear Section Shopping Results