Electronics-Salon 24/20-pin ATX DC Power Supply Breakout Board Module.

Electronics-Salon 24/20-pin ATX DC Power Supply Breakout Board

Electronics-Salon 24/20-pins ATX DC Power Supply Breakout Board. 24-pins Standard ATX Connector, support 20 / 20+4 / 24 pins wire header. Stand-By and Power-ON indicator LEDs. With latching button switch to control power ON/OFF. High quality 24Amp(per position) screw terminal blocks. Terminal Block: Pitch 5.0mm/0.197" Wire range 26AWG ~ 12AWG / 2.5mm2 Rated voltage 400V, rated current 24Amp. Strip length 7mm. Screws - M3,steel,Cr3+ Zn plated. Pin header and Cage - Brass.  

  • Brand: Electronics-Salon
  • ASIN: B01NBU2C64

WGCD 10pcs Joystick Breakout Module Game Controller for Arduino PS2

WGCD 10pcs Joystick Breakout Module Game Controller for

100% Brand New with high-quality, ABS plastic material, reusable.DO port for digital output, AO port for analog output. Size:37x25x32mm Weight: 15 g Connector: +5Vcc - GND - VRx - VRy - SW Material: ABS plastic Game joystick module suits for Arduino PS2 , connects to two analog inputs, the robot is at your commands with X,Y control. It also has a switch that is connected to a digital pin, convenient to use. Package: 10pcs Joystick Breakout Module

  • Brand: WGCD
  • ASIN: B01N59MK0U
  • UPC: 642954049386

Adafruit Ultimate GPS Breakout - 66 channel w/10 Hz updates [ADA746]

Adafruit Ultimate GPS Breakout - 66 channel w/10

Note: This part was updated from Adafruit #99 (discontinued) to Adafruit #746 Adafruit believes this is the Ultimate GPS module, so they named it that. It's got everything you want and more

  • Brand: Adafruit
  • ASIN: B01H1R8BK0
  • UPC: 700598870640

Micro USB Interface Power Adapter Board 5V Breakout Module(pack of 10pcs)

Micro USB Interface Power Adapter Board 5V Breakout

Micro USB Interface Power Adapter Board 5V Breakout Module(pack of 10pcs)

  • Brand: DIYmall
  • ASIN: B07B5ZDLJY

Sysly DB9 Male and DB9 Female D-SUB Adapter Plate Connector RS232 Serial to Terminal Board Signal Module

Sysly DB9 Male and DB9 Female D-SUB Adapter

DB9 male DB9 female adapter plate connector signal module, RS232 serial DB9 9-pin to 4+5 positions screw terminal block. Connector DB9 adapter terminals to facilitate the project, site commissioning equipment. The screw terminal block wire range is 24-12awg, and the pitch is 5. 08mm. All-copper DB9 socket, anti-oxidation, contact better.

  • Brand: Sysly
  • ASIN: B071ZLNDYT
  • UPC: 767520398481

WayinTop 2pcs NRF24L01+PA+LNA RF Transceiver Module with SMA Antenna 2.4 GHz 1100m + 2pcs NRF24L01 Wireless Module with Breakout Adapter On-Board 3.3V Regulator Compatible Arduino

WayinTop 2pcs NRF24L01+PA+LNA RF Transceiver Module with SMA

WayinTop: We aim to make your work Easier & Funnier! Specification: "NRF24L01" Module: PA Gain:20dB LNA Gain:10dB Frequence: 2.4GHz~2.5GHz  Range: 800+ meters line of sight Multi-frequency: 125 frequency Transmit Operating Current(Max):115mA Receiving Operating Current(Max):45mA Board dimensions: 40.7mm x 15.5mm x 12.2mm Operating Voltage: 3 ~ 3.6V (Recommended 3.3V) "NRF24L01+ " Wireless Module: Pin Quantity:8Pin On-board :AMS1117-3.3 chip. Compatible: Arduino and Raspberry Pi Voltage Regulator Input Voltage: 4.8V ~ 12V  Tips: Wireless module operating voltage is generally 3.3v, while the ordinary 51 microcontroller 5v, this module is easy to shop wireless module with 51 single system board used in conjunction. Package Including: 2*NRF24L01+PA+LNA Wireless Transceiver RF Transceiver Module 2*SMA Antenna SMA Antenna 2.4G 1100m 2 * NRF24L01 Wireless Module Breakout Adapter

  • Brand: WayinTop
  • ASIN: B07PBBC4H9
  • UPC: 705883356854

SUKRAGRAHA Female Micro USB to DIP 5-Pin Pinboard 2.54mm Micro USB Type Interface Power Adapter Board 5V Breakout Module 5pc

SUKRAGRAHA Female Micro USB to DIP 5-Pin Pinboard

Description: Base Material: FR4 Board Thickness: 1.6mm Size: Approx. 1.5 x 1.3 x 0.4cm MICRO USB ( 5pin, B Type, Female Connector ) To DIP (2.54mm Pin Pitch)

  • Color: Green
  • Brand: SUKRAGRAHA
  • ASIN: B07T45VG2T
  • UPC: 669002008119

MakerHawk 2pcs 24Pins ATX Benchtop Power Adapter Board Computer ATX Power Supply Breakout Adapter Module 12V 5V 3.3V

MakerHawk 2pcs 24Pins ATX Benchtop Power Adapter Board

Product name: ATX power supply boardCompatible with the port: ATX (compatible with partial BTX type)The PIN number: 24 pinSwitch: YesNumber of sets of output: Four sets of different voltagesBoard Size: 128x48x30 mm/5.04"x1.89"x1.18" (L*W*H)Feature:1. With power output indicator.2. With module switch to turn off output.3. The output terminal can pass the maximum current.4. With output protection fuse,four groups correspond to four road output.Notes:Due to the difference between different monitors,the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.Due to the manual measurement and different measurement methods, please allow 1-5 mm deviation. Thanks!Descriptions:There is a -12V,a +12V,a 5V,a 3.3V terminal.Each output take a 5A fuse. Overcurrent ,fuse can be replaced by yourself.Each power rail has a corresponding ground connection; all of the power rails are brought out to a binding post.About the 24pin port:The 24pin port powers the computer motherboard in the host computer. Usually, this port is used together.Package Including2 * XH-M229 PC ATX Benchtop Power Adapter Board

  • Brand: MakerHawk
  • ASIN: B07M9QS2H4
  • UPC: 673400157614

Breakout Boards, 5pcs WS2812 Breakout Module Board with Independent Color Control for 5050 RGB LED

Breakout Boards, 5pcs WS2812 Breakout Module Board with

Keenso- This LED breakout module board supports high brightness and RGB color, it uses WS2812S chip, which is used for 5050 LED. Specification: Chip: WS2812S Application: For 5050 RGB LED Weight: 22g / 0.8oz (approx.) Package list: 5 * Breakout Boards with Pin Headers

  • Brand: Keenso
  • ASIN: B07PZBQ219
  • UPC: 736342065543

WMYCONGCONG 5 PCS Joystick Breakout Module Game Controller for Arduino PS2 + 120 PCS Multicolored Breadboard Jumper Wires Ribbon Cables Kit

WMYCONGCONG 5 PCS Joystick Breakout Module Game Controller

Specification: Joystick Breakout Module: DO port for digital output, AO port for analog output. Size: 37 x 25 x 32mm/1.46 x 0.98 x 1.26inch Weight: 15 g Connector: +5Vcc - GND - VRx - VRy - SW Material: ABS plastic  Game joystick module suits for Arduino PS2 , connects to two analog inputs, the robot is at your commands with X,Y control.  It also has a switch that is connected to a digital pin, convenient to use.  Breadboard Wires Jumper Wires: 40-pin male to female jumper wires 40-pin male to male jumper wires 40-pin female to female jumper wires Each Cable Length: Approx. 200mm/7.87inch Great accessories for Arduino breadboard kit project, PCB project, pc motherboard. Package content: 5 * Joystick Breakout Module 40 * 2.54mm Breadboard Wires Jumper Wires Male to Male 40 * 2.54mm Breadboard Wires Jumper Wires Male to Female 40 * 2.54mm Breadboard Wires Jumper Wires Female to Female

  • Brand: WMYCONGCONG
  • ASIN: B07KZDDFKR
  • UPC: 705169050681
Similar Breakout Module Shopping Results