Robert Pinchless S Shank Cavalry Snaffle Bit

Robert Pinchless S Shank Cavalry Snaffle

Robert Pinchless Bits by Coronet S Shank Cavalry Snaffle Bit Robert Pinchless Bits by Coronet are designed for functionality and style. In this collection we think you will find just the bit you are looking for. The cheeks are 7 1/2 long, the mouthpiece is 5 inch wide and uses an Robert Pinchless system that attaches to the shank that gives the bit freedom of movement without causing the horse discomfort. The rein and headstall rings are 1 inch circles to allow the headstall and reins to fit and function properly. Each shank is brown iron trimmed with inlaid silver for an elegant, functional style. Each bit is guaranteed for one year. This bit is great for those horses with smaller muzzles.

  • Brand: Robart
  • ASIN: B002HJ723A
  • UPC: 754888966391

Abetta Cavalry Shank Buckle Correction Bit

Abetta Cavalry Shank Buckle Correction

This Correction Bit Features A Medium High Port Mouth W/ Copper Bars. The Shanks Are An 8" Antique Brown Steel W/ A Hand Engraved Silver Buckle Overlay And Silver Accents.

  • Color: Antique Brown
  • Brand: ABETTA
  • ASIN: B002HJ17HW
  • UPC: 641997170064

Billy Allen Cavalry Shank

Billy Allen Cavalry

The Cavalry shank is for the more experienced older horse. The shanks are longer and heavier with increased leverage for a faster signal. The Billy Allen features a roller over the snaffle joint stiffening the bit--very effective for transitioning from the snaffle to a solid mouthpiece. Hand engraved Silver overlay adds a professional look. Shanks: 8-1/4†blued steel Cavalry shank Mouth: 5†sweet-iron Billy Allen with copper bars Trim: Hand engraved Silver overlay

  • Brand: ABETTA
  • ASIN: B015ANS1KC
  • UPC: 641997125354

AJ Tack Wholesale Cavalry Shank Black Steel Curb Bit 5" Sweet Iron Medium Port with Copper Roller

AJ Tack Wholesale Cavalry Shank Black Steel Curb

Black steel cavalry shank medium port curb bit with copper rings. 5" sweet iron medium port with four copper rings in center and copper inlay on bars, 8" cheeks. Mouth: 5" medium port with copper rings and copper inlay Port: 1 1⁄4" Cheeks: 8" black steel

  • Brand: AJ Tack Wholesale
  • ASIN: B002OTZRBC
  • UPC: 713331041924

NRS 1 1/2 Dogbone with Chain Cavalry 8 Cheek Bit

NRS 1 1/2 Dogbone with Chain Cavalry 8

Dutton Bits | 1 1/2 Dogbone center allows this chain mouthpiece more lateral capabilities while also providing some tongue relief The dogbone transfers pressure to the outside where the chain contacts the bars of a horse s mouth | This Cavalry Shank Bit design has a 2 5 purchase 5 shank and an 8 cheek | A swept back shank to discourage a horse from playing with the shank This cheek allows for great balance to the bit as well as the length increases the amount of leverage to your horse s chin and poll | Comes with a bit hobble| 07 CH 19 |

  • Brand: NRS
  • ASIN: B01MD2IY47

Correction Cavalry Shank III

Correction Cavalry Shank

The Cavalry shank is for the more experienced older horse. The shanks are longer and heavier with increased leverage for a faster signal. The medium high port works off roof of the mouth while bar and tongue pressure adds authority. Copper bars keep the mouth wet and responsive. Shanks: 8-1/4†blued or stainless Cavalry shankMouth: 5†sweet-iron correction with copper bars

  • Brand: ABETTA
  • ASIN: B015AO444I
  • UPC: 641997125385

NRS Smooth Dogbone Cavalry 8 Cheek Bit

NRS Smooth Dogbone Cavalry 8 Cheek

Dutton Bits| 1 1/2 long CopperWrapped Dogbone| This Cavalry Shank Bit design has a 2 5 purchase 5 shank and an 8 cheek | 3/8 Inlayed Copper Smooth Bar Mouthpiece to increase salivation| This mouthpiece reaches to the outside pressure points of the bars| Broken threepiece mouth that allows for tongue relief| A swept back shank to discourage a horse from playing with the shank This cheek allows for great balance to the bit as well as the length increases the amount of leverage to your horse s chin and poll | Light severity| Comes with a bit hobble| 07 19|

  • Brand: NRS
  • ASIN: B01M6D1AC2
  • UPC: 400107143318

Abetta Correction Cavalry Shank Bit - Stainless Steel - 5"

Abetta Correction Cavalry Shank Bit - Stainless Steel

The correction mouth is one of the most versatile Cavalry Shank Bits and has 8-1/4 Stainless steel shanks and a 5 Sweet-iron?correction mouth with copper bars. Color: Stainless Steel Size: 5

  • Color: Stainless Steel
  • Brand: ABETTA
  • ASIN: B002HJ8JJG
  • UPC: 641997130259

Regiment WI-800-BG Bugle

Regiment WI-800-BG

Regiment Bugle with Carrying Bag

  • Brand: Regiment
  • ASIN: B000BBW3TO
  • UPC: 736021006195

Correction Cavalry Shank II

Correction Cavalry Shank

The correction mouth has a medium high port that works off the roof of the mouth while bar and tongue pressure adds authority. Copper bars keep the mouth wet and responsive. This Cavalry shank is designed for older more experienced horses with longer turned back shanks for increased leverage and a faster signal. Shanks: 7-1/2†blued steel Cavalry shanksMouth: 5†sweet-iron correction mouth with copper bars.

  • Brand: ABETTA
  • ASIN: B015AO41GE
  • UPC: 641997016287

Rickey Green Roller Spoon Cavalry Cheek Bit

Rickey Green Roller Spoon Cavalry Cheek

Classic Equine Rickey Green Sharp Setter Bit with Roller Rickey's bits were designed for training, practice or competition and feature a loose-cheek shank to encourage lateral flexion and will allow the rider to control the horses nose. The unique mouthpiece of this setter rolls back when engaged, slowing contact and allows more time for the horse to collect and respond to added pressure. Helps develop the horses proper head set and teaches a horse to carry the bit correctly. In a high speed situation helps horse rate smoothly and builds consistency. Rickey recommends using a firm leather curb strap or flat chain with all bits in this series to allow the horse to feel and work off of the bit rather than react to the feel and pressure of a biting curb. Size: 5" Mouth

  • Color: NA
  • Brand: Classic Equine
  • ASIN: B004LLOP50
  • UPC: 610393080659

NRS 3 Piece Floating Hood with Rollers Cavalry 8 Cheek Bit

NRS 3 Piece Floating Hood with Rollers Cavalry

Dutton Bit| 3 Piece 1 1/4 Floating Wire Hood the port/hood is not big enough to use off of palate pressure | Loose copper rollers that are great for bored or nervous horses and also increases salivation| Smooth bars are copper inlayed| This Cavalry Shank Bit design has a 2 5 purchase 5 shank and an 8 cheek | Pressue applied on the outside pressure points of the bars | A swept back shank to discourage a horse from playing with the shank This cheek allows for great balance to the bit as well as the length increases the amount of leverage to your horse s chin and poll | Light Severity| Comes with a bit hobble| 07 122|

  • Brand: NRS
  • ASIN: B01M5KBWQL
  • UPC: 400107143394

Correction Cavalry Shank I

Correction Cavalry Shank

The correction mouth has a medium high port that works off the roof of the mouth while bar and tongue pressure adds authority. Copper rings keep the mouth wet and increases sensitivity. This Cavalry shank bit designed for older more experienced horses with longer turned back shanks for increased leverage and a faster signal. Shanks: 7-1/2†blued steel Cavalry shanksMouth: 5â€, “Sweet-iron†correction mouth with copper rings.

  • Brand: ABETTA
  • ASIN: B015AO3ZM0
  • UPC: 641997016409

Correction Cavalry Shank

Correction Cavalry

The correction mouth has a medium high port that works off the roof of the mouth while bar and tongue pressure adds authority. Copper wire keeps the mouth wet and increases sensitivity. This Cavalry shank bit designed for older more experienced horses with longer turned back shanks for increased leverage and a faster signal. Shanks: 7-1/2†blued steel Cavalry shanksMouth: 5â€, “Sweet-iron†correction mouth with copper wire

  • Brand: ABETTA
  • ASIN: B015AO3Y9O
  • UPC: 641997016416

NRS Billy Allen Roller Cavalry 8 Cheek Bit

NRS Billy Allen Roller Cavalry 8 Cheek

Dutton Bits| Two bar pieces are connected by a barrel type hinge in the center of the mouthpiece| Has a slight amount of break in the center with both bar pieces functioning independently allowing lift one side at a time| Copper Inlay Bars| The bars of this bit are angled for Mullen Relief that makes a bit sit comfortably in a horses mouth| Applies mainly tongue pressure which is one of the most sensitive areas on a horse | This Cavalry Shank Bit design has a 2 5 purchase 5 shank and an 8 cheek | Medium to Strong Severity| Comes with a bit hobble| 07 BA1|

  • Brand: NRS
  • ASIN: B01M6CY373
  • UPC: 400107143325

NRS 1 1/4 Rounded Low Port Chain Cavalry 8 Cheek Bit

NRS 1 1/4 Rounded Low Port Chain Cavalry

Dutton Bits| 1 1/4 Rounded Low Port that has copper inlay on the port backside| Chain Mouth Across The Bars that are twisted backwards allows for equal pressure and release on both sides of the bars in the horses mouth | Applies pressure mainly on the bars and outer edge of the tongue while allowing tongue relief to the center of the tongue where the port is located| A swept back shank to discourage a horse from playing with the shank This cheek allows for great balance to the bit as well as the length increases the amount of leverage to your horse s chin and poll | This Cavalry Shank Bit design has a 2 5 purchase 5 shank and an 8 cheek | Comes with a bit hobble | CH 8|

  • Brand: NRS
  • ASIN: B01MQDX7K9

Classic Rope Company Cavalry Star Cheek Correction Horse Bit

Classic Rope Company Cavalry Star Cheek Correction Horse

Cavalry Star cheek| Grey iron| German silver star scroll| 5 5in shank| 2 5in purchase| Correction bit| Angled shank| Suits finished well broke horses| BITCSS10|

  • Brand: Classic Rope Company
  • ASIN: B00CG63ZJE
  • UPC: 610393071657

NRS Twisted Wire Angled Square Port Cavalry Bit

NRS Twisted Wire Angled Square Port Cavalry

Dutton Bits and Spurs| Angled Square Port for Palate Pressure thus encourages a horse to flex vertically i e break at the poll | Ridges in the twisted wire bars motivate horses to not brace against the rider s hands | Copper Rings promote salivation in the mouth enhancing the taste of the bit to a horse as well as a horse that is nervous can roll this rings in its mouth for relief| There is four moving parts to this bit both shankes move as well as the port moves where it is double jointed to the bars of the bit| This Cavalry Cheek Bit design has a 2 5 purchase 5 shank and an 8 cheek| The bars of this bit are angled for mullen relief that makes a bit to sit comfortably in a horses mouth| Comes with a bit hobble to stabilize shanks| 07 BH2|

  • Brand: NRS
  • ASIN: B07DDKYHSQ

Abetta Cavalry Shank Buckle Bit - Antique Brown Steel - 5"

Abetta Cavalry Shank Buckle Bit - Antique Brown

Features a 7" modified 'S' shaped Buckle Up Bit Shank with a Sweet iron medium port mouth and an Antique brown finish to go with a hand-engraved silver buckle and trim. Color: Antique Brown Steel Size: 5

  • Color: Antique Brown Steel
  • Brand: ABETTA
  • ASIN: B002HJ175Y
  • UPC: 641997170057

Classic Equine Rickey Green Chain Cavalry Cheek Bit

Classic Equine Rickey Green Chain Cavalry Cheek

Classic Equine Ricky Green Long Chain Bit Rickey's bits were designed for training, practice or competition and feature a loose-cheek stainless steel shank to encourage lateral flexion and will allow the rider to control the horses nose. The pinchless mouthpiece of the Chain is shaped to lay flat across the mouth and tongue and it attaches to the shank in a manner that softly cues the horse as pressure is applied. Allows for collection, helping the horse break at the poll and the gentle action of the mouthpiece teaches a horse to lift his shoulder and prepare to stop. Rickey recommends using a firm leather curb strap or flat chain with all bits in this series to allow the horse to feel and work off of the bit rather than react to the feel and pressure of a biting curb. Features: Loose-cheek Shank Pinchless Mouthpiece Specifications: Mouth: 5" Cheek: 8" Purchase: 3" Shank: 5"

  • Brand: Classic Equine
  • ASIN: B004Q4ZRXG
  • UPC: 610393080642

NRS Copper Wrapped Large Lifesaver Cavalry 8 Cheek Bit

NRS Copper Wrapped Large Lifesaver Cavalry 8 Cheek

Dutton Bits| 1 1/2 Large Lifesaver Ring| Allows great reach to the outside of the bars on the horses mouth| Copper Wrapped Bars| A swept back shank to discourage a horse from playing with the shank This cheek allows for great balance to the bit as well as the length increases the amount of leverage to your horse s chin and poll | This Cavalry Shank Bit design has a 2 5 purchase 5 shank and an 8 cheek | Center ring works primarily on tongue pressure| Encourgages flexion at the poll headset and collection| The bars of this bit are angled for Mullen Relief that makes a bit sit comfortably in a horses mouth| Medium severity| Comes with a bit hobble| 07 30|

  • Brand: NRS
  • ASIN: B01M7YL8BJ
  • UPC: 400107143349

NRS 1 1/4 Square Port Chain 8 Cavalry Cheek Bit

NRS 1 1/4 Square Port Chain 8 Cavalry

Dutton Bits| 1 1/4 height x 2 width Low Square Port | Chain Mouth Across The Bars that are twisted backwards allows for equal pressure and release on both sides of the bars in the horses mouth | Applies pressure mainly on the bars and outer edge of the tongue while allowing tongue relief to the center of the tongue where the port is located| A swept back shank to discourage a horse from playing with the shank This cheek allows for great balance to the bit as well as the length increases the amount of leverage to your horse s chin and poll | This Cavalry Shank Bit design has a 2 5 purchase 5 shank and an 8 cheek | Medium Severity | Comes with a bit hobble| 07 CH5|

  • Brand: NRS
  • ASIN: B01MFGSUCS
  • UPC: 400107143363

NRS Chain Cavalry 8 Cheek Bit

NRS Chain Cavalry 8 Cheek

Dutton Bits| Full Chain Mouth that adds tongue pressure and evenly distributes equal pressure over the bars| Lays nicely over the tongue and bars for leverage or hold pressure on the bit| A couple of small copper rings are added to this chain mouthpiece to encourage salivation and reduces stress| A swept back shank to discourage a horse from playing with the shank This cheek allows for great balance to the bit as well as the length increases the amount of leverage to your horse s chin and poll | This Cavalry Shank Bit design has a 2 5 purchase 5 shank and an 8 cheek | Comes with a bit hobble| 07 CHAIN|

  • Brand: NRS
  • ASIN: B01M7YJ9MJ
  • UPC: 400108428872

Abetta Cavalry Shank Correction Bit - Stainless Steel - 5"

Abetta Cavalry Shank Correction Bit - Stainless Steel

The Correction Cavalry Shanks are longer and heavier for a faster signal. Has 8-1/4 Stainless steel Cavalry shanks, a 5 Sweet-iron?correction mouth with copper bars and a Hand-engraved silver overlay.

  • Color: Stainless Steel
  • Brand: ABETTA
  • ASIN: B002HJ15UG
  • UPC: 641997130303

NRS Smooth One by Two Port Correction Cavalry 8 Cheek Bit

NRS Smooth One by Two Port Correction Cavalry

Dutton Bit| 2 high by 1 wide rounded high port that will work off of palate pressure on the roof of the mouth since it is 2 or higher | This Cavalry Shank Bit design has a 2 5 purchase 5 shank and an 8 cheek | Good vertical and collection functions| A swept back shank to discourage a horse from playing with the shank This cheek allows for great balance to the bit as well as the length increases the amount of leverage to your horse s chin and poll | Inlayed Copper Bars for Salivation| The bars of this bit are angled for Mullen Relief that makes a bit sit comfortably in a horses mouth| Medium Severity| Shop this bit with Copper Wrapped Bars here | We recommend using this bit as a training tool and not riding in it everyday | Comes with a bit hobble| 07 07I|

  • Brand: NRS
  • ASIN: B01MXFUYDO
  • UPC: 400107143370

NRS 2 Ported Chain Cavalry 8 Cheek Bit

NRS 2 Ported Chain Cavalry 8 Cheek

Dutton Bits| 2 high port that will work off of palate pressure on the roof of the mouth since it is 2 or higher | This bit gives a horse cues to the roof of the mouth as well as working off tongue and bar pressure| Chain pieces collapse across the bars encouraging flexion as well as collection| A swept back shank to discourage a horse from playing with the shank This cheek allows for great balance to the bit as well as the length increases the amount of leverage to your horse s chin and poll | This Cavalry Shank Bit design has a 2 5 purchase 5 shank and an 8 cheek | Medium Severity| This bit is encouraged to use for training and not everyday riding| Comes with a bit hobble| 07 CH4|

  • Brand: NRS
  • ASIN: B01M5K8A5J
  • UPC: 400107143356

Colorado Saddlery The Cavalry Style S" Cheek Bit with Copper Roller

Colorado Saddlery The Cavalry Style S" Cheek Bit

This is a good transition bit for going from a snaffle to a curb. It has a 5" mouth with a 6 1/2" shank. The copper rollers help calm a horse and will help keep the mouth moist. It has low to moderate leverage and can be used as an everyday bit.

  • Brand: Colorado Saddlery
  • ASIN: B00PDGZYOS
  • UPC: 612458250045

NRS Smooth One by One Inlay Cavalry 8 Cheek Bit

NRS Smooth One by One Inlay Cavalry 8

Dutton Bit| 1 Port Height x 1 Port Width no palate pressure since it is under 2 in height | Copper Inlaid Bars| Applies pressure mainly on the bars and outer edge of the tongue while allowing tongue relief to the center of the tongue where the port is located| This bit encourages excellent collection and vertical poll functions| Four moving parts to this bit both shanks move as well as the port moves where it is double jointed to the bars of the bit| The bars of this bit are angled for Mullen Relief that makes a bit sit comfortably in a horses mouth| This Cavalry Shank Bit design has a 2 5 purchase 5 shank and an 8 cheek | Shop the copper wrapped version here | Comes with a bit hobble| 07 37I|

  • Brand: NRS
  • ASIN: B01M5KBMEM
  • UPC: 400107143295

NRS 5/8 Small Donut with Chain Cavalry 8 Cheek Bit

NRS 5/8 Small Donut with Chain Cavalry 8

Dutton Bits | 5/8 Small Donut Lifesaver Ring | Limits the reach to the outside of the bars on the horses mouth| Chain Mouth Across The Bars that are twisted backwards allows for equal pressure and release on both sides of the bars in the horses mouth | A swept back shank to discourage a horse from playing with the shank This cheek allows for great balance to the bit as well as the length increases the amount of leverage to your horse s chin and poll | This Cavalry Shank Bit design has a 2 5 purchase 5 shank and an 8 cheek | A couple of small copper rings are placed on the bottom half of the donut to encourage salivation in the horses mouth and reduces stress | Comes with a bit hobble| 07 CH 09 |

  • Brand: NRS
  • ASIN: B01M6CYYCW

NRS Copper Wrapped One by Two Port Correction Cavalry 8 Cheek Bit

NRS Copper Wrapped One by Two Port Correction

Dutton Bits| 2 high by 1 wide rounded high port that will work off of palate pressure on the roof of the mouth since it is 2 or higher | Copper wrapped bars| A swept back shank to discourage a horse from playing with the shank This cheek allows for great balance to the bit as well as the length increases the amount of leverage to your horse s chin and poll | The bars of this bit are angled for Mullen Relief that makes a bit sit comfortably in a horses mouth| Good lateral and collection functions| This Cavalry Shank Bit design has a 2 5 purchase 5 shank and an 8 cheek | Medium Severity| We recommend using this bit as a training tool and not riding in it everyday | Shop this bit in the Copper Inlaid Version | Comes with a bit hobble| 07 07|

  • Brand: NRS
  • ASIN: B01M7YM35P

Sims Cavalry Shank Medium Grazer Bit - 5"

Sims Cavalry Shank Medium Grazer Bit -

This bit features 7 1/2" Stainless Steel Cavalry with a 5" Stainless steel Medium Grazer Port mouthpiece. Size: 5

  • Brand: Sims Vibration
  • ASIN: B002HJ570K
  • UPC: 641997403124

8in Cavalry Stainless Cheek Correction Bit

8in Cavalry Stainless Cheek Correction Bit

Classic Equine| Stainless Steel Bit| 7 1/2 Cavalry Cheek| 5 1/2 Shank| 2 1/2 Purchase| Swept back creates a quicker more immediate response| SSPSBIT8CS10|

  • Color: NA
  • Brand: Classic Equine
  • ASIN: B004LAFUSM
  • UPC: 610393071282

Darnall Aluminum Engraved High Port Cavalry Shank Bit

Darnall Aluminum Engraved High Port Cavalry Shank

This bit features 8'' hand engraved Aluminum Cavalry shanks with a 5'' x 3/8'' High Port mouthpiece with inlaid copper bars.

  • Brand: Greg Darnall
  • ASIN: B07NXYB7JK
  • UPC: 641997199102

NRS 2 1/4 High Correction with Copper Rollers Cavalry 8 Cheek Bit

NRS 2 1/4 High Correction with Copper Rollers

Dutton Bits| 2 1/4 High Correction Bit| This bit will work a lot off of palate pressure on the roof of the mouth since it is 2 or higher | Loose Copper Rollers on the bars that move out of the way and increase bar pressure that cues collection and flexion from a horse| This Cavalry Shank Bit design has a 2 5 purchase 5 shank and an 8 cheek | A swept back shank to discourage a horse from playing with the shank This cheek allows for great balance to the bit as well as the length increases the amount of leverage to your horse s chin and poll | Comes with a bit hobble| Strong Severity| We recommend using this bit as a training tool and not riding in it everyday | 07 08|

  • Brand: NRS
  • ASIN: B01M5KC4J4
  • UPC: 400107143424

Darnall Aluminum Engraved Spooned U.S. Port Cavalry Shank Bit

Darnall Aluminum Engraved Spooned U.S. Port Cavalry Shank

This bit features 8'' hand engraved Aluminum Cavalry shanks with a 5'' short, spooned U.S. Port mouthpiece with inlaid copper bars.

  • Brand: Greg Darnall
  • ASIN: B00FE195OW
  • UPC: 641997199133

Abetta Cavalry Shank Snaffle Bit - Blue Steel - 5"

Abetta Cavalry Shank Snaffle Bit - Blue Steel

Has 8 Loose black steel seven shaped cheeks with a 5 Iron copper wire wrapped mouth with center ring. Color: Blue Steel Size: 5

  • Color: Blue Steel
  • Brand: ABETTA
  • ASIN: B007T9AIP2
  • UPC: 641997016355

Robart Pinchless Correctional Shank Bit

Robart Pinchless Correctional Shank

Robart Pinchless Bits by Coronet 3 Way Correctional Cavalry Shank Bit A 3-piece Pinchless correctional snaffle. Designed for young horses who require more than a snaffle but less than a correctional bit. Helps a rider get more shoulder and hip control out of the horse. A great transitional bit. Robart Pinchless Bits by Coronet are designed for functionality and style. In this collection we think you will find just the bit you are looking for. The cheeks are 7 1/2 long, the mouthpiece is 5 inch wide and uses an Robart Pinchless system that attaches to the shank that gives the bit freedom of movement without causing the horse discomfort. The rein and headstall rings are 1 inch circles to allow the headstall and reins to fit and function properly. Each shank is brown iron trimmed with silver dots for an elegant look. For the horse that needs more than a snaffle and does not like a lot of tongue pressure. This bit give some tongue pressure and more pallet pressure, excellent for performance horses. Each bit is guaranteed for one year.

  • Brand: Robart
  • ASIN: B002HJAOA8
  • UPC: 754888966490

Darnall Aluminum Engraved Medium Port Cavalry Shank Bit - 5"

Darnall Aluminum Engraved Medium Port Cavalry Shank Bit

This bit features 8" hand engraved Aluminum Cavalry shanks with a 5" x 1/2" Medium Port mouthpiece with inlaid copper bars. Size: 5

  • Brand: Darnall
  • ASIN: B002HJCO7E
  • UPC: 641997199157

Darnall Aluminum Engraved Sponned U.S. Port Cavalry Shank Bit

Darnall Aluminum Engraved Sponned U.S. Port Cavalry Shank

This bit features 8" hand engraved Aluminum Cavalry shanks with a 5" short, spooned U.S. Port mouthpiece with inlaid copper bars. Size: 5

  • Brand: Darnall
  • ASIN: B002HJ8IVK

Darnall Aluminum Engraved Grazer Port Cavalry Shank Bit - 5"

Darnall Aluminum Engraved Grazer Port Cavalry Shank Bit

This bit features 8" hand engraved Aluminum Cavalry shanks with a 5" x 1/2" Grazer Port mouthpiece with inlaid copper bars. Size: 5

  • Brand: Darnall
  • ASIN: B002HJ77CG
  • UPC: 641997199164
Similar Cavalry Shank Bit Shopping Results