For 64-72 Chevelle Monte Carlo GTO Heavy Duty Tubular Control Arms A Body

For 64-72 Chevelle Monte Carlo GTO Heavy Duty

This auction is for a set of upper and lower heavy duty tubular control arms.They are significantly stronger than stock.--Fit any A Body GM car--Suspension geometry is improved over stock by increasing camber gain and improving roll camber. These control arms are redesigned for better steering and suspension.--They utilize bleeding-edge manufacturing processes which include mandrel bends and precision cnc welding. --The highest quality DOM steel tubing has been used for their construction and have a chip and scratch resistant powdercoated finish. --They require no modification to the body or frame of your vehicle, they are complete bolt-in replacements--The upper control arms also utilize greaseable bushings which make for increased stiffness over stock to provide more consistent and precise handling. The tubular lower control arms replace stock lower control arms.--Upper arms are 1.125" OD - .125" Wall Tubing.And have 4* Positive Caster. --Lower arms are 1.625" OD - .156" DOM Tubing.And are Set at Stock Caster --The conventional lower coil spring pocket features a stamped steel pocket with a positive spring locating feature and nutserts for the shock lower attachment.

  • Brand: DEMOTOR
  • ASIN: B00VLFEGXK

Proheader TCA-6772UL - GM Abody Chevy Chevelle Tubular Upper & Lower Control Arms

Proheader TCA-6772UL - GM Abody Chevy Chevelle Tubular

These are the tubular control arms you have been asking about. and improved! These arms are powder coated, include bump stops and have improved ball joint clearances. A-body tubular upper and lor control arm set is now available at the most competitive price around. ; Improves handling and performance! These are the Authentic original UPPER and LOR tubular control arms!! Ready to install and GO! Works with stock coils or coil over springs. HUGE TUBE DESIGN FOR LESS DEFLECTION. Lors are 1.500" OD - .156 wall DOM tubing Uppers are 1.125" OD - .125 wall DOM tubing Special billet cross shafts allow for more camber and caster adjustment, giving vehicle more high speed stability. FULLY ASSEMBLED READY TO RUN!! ADDED BONUS POINTS: The bushings dont squeak Complete and ready to bolt on . Powder Coated! . Angled front ball joint relief design on the lor arms, this ensures a better fit. . Inner coil retainer design, built stronger than others on the market. These arms are a must when running steering. Sold sets of 4.Note: Will not work with vehicles equipped with drum brakes. Some modifications may be required! Works only with disc brake applications only, no drum brakes. Will not lor vehicle any with stock springs.Q. What difference will be noticed from the tube arms and the sto...

  • Brand: Proheader
  • ASIN: B00GXNECV6

For 64-72 Chevelle A Body Upper and Lower Tubular Control A Arms Set

For 64-72 Chevelle A Body Upper and Lower

Description: Application: 1964-1967 Chevelle, Malibu, Monte Carlo and El Camino 1964-1967 Skylark, Century, Special, Luxus and Regal 1966-1967 4-4-2, Cutlass, Calais, F85 and Vista Cruiser 1964-1967 Lemans, Grand Am, Grand Lemans, GTO, T37 and Tempest, These control arms are jig made from heavy duty Steel for long lasting abuse. These control arms are a Fully Assembled, complete set ready to bolt on and include all ball joints and bump stops. These control arms will work with stock coil springs. COMPLETE SET OF 4 -- 2 Uppers -- 2 LOWERS --- Fully Assembled Lower Control arms are 1.625" OD - .156 wall tubing Upper Control arms are 1.125" OD - .125 DOM tubing Package: Including all items in the picture. Note: Professional Installation is Highly Recommended.

  • Brand: DEMOTOR
  • ASIN: B075F35D4R

Tuningsworld for Chevrolet Heavy Duty Tubular Control Arms, Performance Front Upper/Lower Control Arms for GM Chevy/Pontiac/Oldsmobile Cutlass/Buick Century 1964-1972

Tuningsworld for Chevrolet Heavy Duty Tubular Control Arms,

Applications Fit for 1964-1972 GM A Body for Buick Century, Luxus, Regal, Skylark, and Special 1964-1972 for Chevy Chevelle, El Camino, Malibu, and Monte Carlo 1964-1972 for Pontiac Lemans, GTO, Grand Am, Grand Lemans, Tempest, and T37 1964-1972 for Pontiac Grand Prix 1969-1972 for Oldsmobile Cutlass, F85, 4-4-2, Vista Cruiser, and Calais 1966-1972 for GMC Sprint Truck 1970-1972 Features * This is a set of upper and lower heavy duty tubular control arms. * These arms are the perfect compliment to any race car, hot rod, or restoration. * Suspension geometry is improved over stock by increasing camber gain and improving roll camber. These control arms are redesigned for better steering and suspension. * The upper control arms also utilize greaseable bushings which make for increased stiffness over stock to provide more consistent and precise handling. The tubular lower control arms replace stock lower control arms. Notes * Instruction is not included. Professional installation is highly recommended.

  • Brand: Tuningsworld
  • ASIN: B07RYMB241

A-Team Performance Heavy Duty Tubular Control Arms A Body Compatible with 1964-1972 Chevelle Monte Carlo GTO

A-Team Performance Heavy Duty Tubular Control Arms A

A-Team Performance Heavy Duty Tubular Control Arms A Body Compatible with 1964-1972 Chevelle Monte Carlo GTO Ready for coil springs. Powder-coated in black for long lasting finish. These economical, ready to bolt on control arms for your 1964-1972 Chevy full size come complete with pre-installed bushings and ball joints. They feature powder coated black finish. Don't continue to replace the ball joints in your stock arms leaving the arms weak and prone to fail under load. Improve handling and freshen up your front end with these easy to install tubular control arms! Includes both upper and lower control arms. Complete kit with all new components. Strong and lightweight with polyurethane bushings. A-Team Performance Parts are sold Exclusively by Southwest Performance Parts.

  • Brand: A-Team Performance
  • ASIN: B079WR73D7

For 64-72 Chevelle Monte Carlo GTO Heavy Duty Tubular Lower Control Arms A Body

For 64-72 Chevelle Monte Carlo GTO Heavy Duty

Application: --1964-1972 Chevelle, Malibu, Monte Carlo and El Camino --1964-1972 Lemans, Grand Am, Grand Lemans, GTO, T37 and Tempest --1969-1972 Grand Prix --1970-1972 Sprint Trucks --1966-1972 4-4-2, Cutlass, Calais, F85 and Vista Cruiser --1964-1972 Skylark, Century, Special, Luxus and Regal Discription: --This auction is for a set of lower heavy duty tubular control arms.They are significantly stronger than stock. --Fit any A Body GM car --Suspension geometry is improved over stock by increasing camber gain and improving roll camber. These control arms are redesigned for better steering and suspension. --They utilize bleeding-edge manufacturing processes which include mandrel bends and precision cnc welding. --The highest quality DOM steel tubing has been used for their construction and have a chip and scratch resistant powdercoated finish. --They require no modification to the body or frame of your vehicle, they are complete bolt-in replacements --Lower arms are 1.625" OD - .156" DOM Tubing.And are Set at Stock Caster --The conventional lower coil spring pocket features a stamped steel pocket with a positive spring locating feature and nutserts for the shock lower attachment.

  • Brand: DEMOTOR
  • ASIN: B017DA6ME2

A-Team Performance Tubular Control Arms Upper and Lower Full Size with Tubular Steel Construction Ball Joints Compatible with 1958-1964 Chevrolet Chevy Impala Black Finish

A-Team Performance Tubular Control Arms Upper and Lower

A-Team Performance Tubular Control Arms Upper and Lower Full Size with Tubular Steel Construction Ball Joints Compatible with 1958-1964 Chevrolet Chevy Impala Black Finish Tubular Steel Construction Ball Joints included! Ready for coil springs and powder-coated in black for a long-lasting finish. These economical, ready to bolt on control arms for your 1958-1964 Chevy full size come complete with pre-installed bushings and ball joints. They feature powder coating in black finish. Don't continue to replace the ball joints in your stock arms leaving the arms weak and prone to fail under load. Improve handling and freshen up your front end with these easy to install tubular control arms! Includes both upper and lower control arms. Complete kit with all new components. Strong and lightweight with polyurethane bushings. A-Team Performance parts are sold exclusively by Southwest Performance Parts.

  • Brand: A-Team Performance
  • ASIN: B079WD8GGQ

Waverspeed for Chevy Tubular Control Arms, Heavy Duty Front Upper&Lower Control Arms for Chevy/Pontiac/Oldsmobile Cutlass/Buick Century 1964-1972, GMC Sprint Truck 1970-1972

Waverspeed for Chevy Tubular Control Arms, Heavy Duty

Applications Fit for 1964-1972 GM for Buick Century, Luxus, Regal, Skylark, and Special 1964-1972 for Chevy Chevelle, El Camino, Malibu, and Monte Carlo 1964-1972 for Pontiac Lemans, GTO, Grand Am, Grand Lemans, Tempest, and T37 1964-1972 for Pontiac Grand Prix 1969-1972 for Oldsmobile Cutlass, F85, 4-4-2, Vista Cruiser, and Calais 1966-1972 for GMC Sprint Truck 1970-1972 Features * This is a set of upper and lower heavy duty tubular control arms. * These arms are the perfect compliment to any race car, hot rod, or restoration. * Suspension geometry is improved over stock by increasing camber gain and improving roll camber. These control arms are redesigned for better steering and suspension. * The upper control arms also utilize greaseable bushings which make for increased stiffness over stock to provide more consistent and precise handling. The tubular lower control arms replace stock lower control arms. Notes * Instruction is not included. Professional installation is highly recommended. * Will not work with vehicles equipped with drum brakes. Some modifications may be required! Works only with disc brake applications only, no drum brakes.

  • Brand: Waverspeed
  • ASIN: B07H4NZZH8

Southside Machine Performance Polyurethane Adjustable Rear Upper Control Arms For GM A Body 1968-1972 Chevelle Monte GTO Malibu

Southside Machine Performance Polyurethane Adjustable Rear Upper Control

Our extreme duty control arms allow for pinion angle adjustment for reduced vibration and increased traction. Our exclusive Polyurethane bushings offer controlled positioning during suspension travel which improves traction and rear suspension efficiency. This item is a must for any high horsepower. Benefits: pinion angle adjustments for improved traction and reduced wheel hop. Heavy duty construction for long lasting durability on the street or track. Complete ready to bolt-in and new hardware. Stock control arms are on the borderline of junk, bushing deflection and rusting weak stamped material add for traction loss and poor handling ability. Our tubular control arms are designed to give you the best of both worlds, whether your car is a weekend cruiser or a weekend track addict we got you covered. Test for over 1500 horsepower. These are truly overkill! All Made in USA! All parts are custom built in house. Indianapolis Indiana Please give us a call before your purchase to make sure this is the right kit for you. We have several kits available for different types of cars.

  • Brand: SOUTHSIDE MACHINE PERFORMANCE
  • ASIN: B06XD4DFYC

Auto Metal Direct X393-3464-L Lower Control Arm

Auto Metal Direct X393-3464-L Lower Control

Lower Control Arm1964-1972 GMLeft/Driver Side

  • Brand: Auto Metal Direct
  • ASIN: B00THK1IJQ
  • UPC: 012565016143
Similar Chevelle Tubular Control Arms Shopping Results