DEI 080243 CryO2 Tall 10 lb-Tank Mounting Bracket for CryO2 Systems

DEI 080243 CryO2 Tall 10 lb-Tank Mounting Bracket

Tall ten pound tank mounting bracket for the CryO2 system. CryO2 accessories are precision made from the finest materials then maticulously tested to perform at the highest level possible.

  • Brand: Design Engineering
  • ASIN: B0039YWWJQ
  • UPC: 607078802439

DEI 080232 Push Button Switch For On/Off Control of CryO2 System Bursts

DEI 080232 Push Button Switch For On/Off Control

The CryO2 push button switch is a replacement part for the original switch that is found in the CryO2 installation kits.  This switch gives you basic on/off control of your CryO2 system bursts. CryO2 accessories are precision made from the finest materials then maticulously tested to perform at the highest level possible.

  • Brand: Design Engineering
  • ASIN: B0039YWWDC
  • UPC: 607078802323

DEI 080102 CryO2 Tank And Installation Kit, 10 lbs

DEI 080102 CryO2 Tank And Installation Kit, 10

CryO2 is a revolutionary product designed to reduce air and fuel temperatures thus creating power. Through the science of aerodynamics and cryogenics, Design Engineering (DEI) has developed a system to harness the cryogenic properties of liquid CO2 to lower the intake charge temperature by up to 50 degrees Fahrenheit. The system is modular and can be easily expanded. The CryO2 system provides two methods for cooling the air charge and one for cooling fuel, all utilizing the same burst of liquid CO2. CO2 is readily available at any welding or medical supply locations or where paintball guns are charged. The Power of COOL - Welcome to the future of power. Each kit includes: 10 pound CO2 tank, Tank mounting brackets, Cryogenic solenoid valve, 14 ft. stainless steel braided supply line, Arming, activation, and WOT switches, All necessary CO2 fittings and electrical hardware.

  • Brand: Design Engineering
  • ASIN: B000CEQC2E
  • UPC: 607078801029

DEI 080204 CryO2 Stainless Steel Braided Hose, 4AN Female x 1/8 NPT Male, 1'

DEI 080204 CryO2 Stainless Steel Braided Hose, 4AN

This stainless steel braided hose is designed for use with your CryO2 system from Design Engineering.

  • Brand: Design Engineering
  • ASIN: B0039YWW2I
  • UPC: 607078802040

DEI 080124 CryO2 Cryogenic Fuel Bar, 10AN - Polished

DEI 080124 CryO2 Cryogenic Fuel Bar, 10AN -

The CryO2 Fuel Bar is a billet aluminum extension to the fuel line with a cryogenic chamber. The bar is charged with liquid CO2 and freezes to -80 degrees Fahrenheit. Heat is removed from the fuel as it passes through resulting in a colder denser fuel charge. The CryO2 Fuel Bar is available in -6AN, -10AN and can be reduced for -8AN fuel line size. Four Cryo-Ports allow versatility of installation. Each Fuel Bar comes complete with vent plug, Cryo-Port plugs and connection/vent hose. The CryO2 Fuel Bar can be used alone or in conjunction with other CryO2 components. Available in either anodized or polished finish with engraved CryO2 logo. Measures 1.5" W x 6" L x 1" thick.

  • Color: 10AN - Polished
  • Brand: Design Engineering
  • ASIN: B000FKGBZI
  • UPC: 607078801241

DEI 080206 CryO2 Stainless Steel Braided Hose, 4AN Female x 1/8 NPT Male, 5'

DEI 080206 CryO2 Stainless Steel Braided Hose, 4AN

This stainless steel braided hose is designed for use with your CryO2 system from Design Engineering.

  • Brand: Design Engineering
  • ASIN: B0039YWW64
  • UPC: 607078802064

DEI 080111 CryO2 Cryogenic Air Intake for Turbocharged/Supercharged Applications, 2.5" O.D.

DEI 080111 CryO2 Cryogenic Air Intake for Turbocharged/Supercharged

The CryO2 patented Air Intake consists of an aerodynamically designed bulb with a cryogenic chamber which is mounted in a 4" segment of air tube. As the air passes over the bulb, heat is removed resulting in a colder, denser, more powerful intake air charge. Testing showed a reduction in intake air temperature up to 50 degrees Fahrenheit. The CryO2 Air Intake can be used on turbocharged, supercharged and normally aspirated applications. Multiple units can be used for stronger results. Air Intake easily installs and comes with silicone connection sleeve, hose clamps and connection/vent hose.

  • Brand: Design Engineering
  • ASIN: B000CEM3PE
  • UPC: 607078801111

DEI 080107 CryO2 Tank Nut and Nipple to Male 4AN Assembly

DEI 080107 CryO2 Tank Nut and Nipple to

DEI CryO2 system tank nut and nipple assembly is designed for use on your existing CryO2 system tank.

  • Brand: Design Engineering
  • ASIN: B0039Z1ZL6
  • UPC: 607078801074

DEI 080205 CryO2 Stainless Steel Braided Hose, 4AN Female x 1/8 NPT Male, 3'

DEI 080205 CryO2 Stainless Steel Braided Hose, 4AN

This stainless steel braided hose is designed for use with your CryO2 system from Design Engineering.

  • Brand: Design Engineering
  • ASIN: B0039Z3VGS
  • UPC: 607078802057

DEI 080301 CryO2 Purge Kit - Dual Purge Valve (Tube Only)

DEI 080301 CryO2 Purge Kit - Dual Purge

A purge blast of CO2 will turn heads, command attention and crank up the "wow" factor a few notches. Some suggested mounting locations for a CryO2 single or dual purge valve include hood scoops, front grille, air vents and fender wells - anywhere inquisitive spectators will be sure to appreciate a new and different "cool" experience.

  • Brand: Design Engineering
  • ASIN: B0039Z5ZUS
  • UPC: 607078803016

DEI 080135 CryO2 Line Splitter for Dual CryO2 Intercooler Sprayers or Purges

DEI 080135 CryO2 Line Splitter for Dual CryO2

The CryO2 system line splitter gives you the ability to split your CryO2 system lines so that you can route additional CO2 to other areas of your vehicle.

  • Brand: Design Engineering
  • ASIN: B0039Z204C
  • UPC: 607078801357

DEI 080200 CryO2 Solenoid Valve

DEI 080200 CryO2 Solenoid

This CryO2 solenoid valve, designed by DEI, is a genuine replacement for your existing CryO2 system solenoid valve.

  • Brand: Design Engineering
  • ASIN: B0039YWVUQ
  • UPC: 607078802002

DEI 080130 CryO2 Front Mount Intercooler Sprayer, 16" x 5"

DEI 080130 CryO2 Front Mount Intercooler Sprayer, 16"

CryO2 Intercooler Sprayers mount directly to the front of air-to-air intercoolers or aftercoolers and serve as a way to vent the liquid CO2 directly on to the cooling fins thus, enhancing the performance of the intercooler by more than 50% eliminating intercooler heat soak. NOTE: This component must always be the last in the CryO2 system as it vents the liquid CO2 charge.

  • Brand: Design Engineering
  • ASIN: B000CEQC38
  • UPC: 607078801302

DEI 080230 Full Wide Open Throttle Switch Kit For Existing CryO2 Systems

DEI 080230 Full Wide Open Throttle Switch Kit

The DEI full wide open throttle CryO2 switch kit includes everything needed to add a wide open throttle switch to your existing CryO2 system. CryO2 accessories are precision made from the finest materials then maticulously tested to perform at the highest level possible.

  • Brand: Design Engineering
  • ASIN: B0039YWW9Q
  • UPC: 607078802309

DEI 080216 CryO2 NPT Female Y Block, 1/8"

DEI 080216 CryO2 NPT Female Y Block,

The CryO2 T-Block is designed to expand your existing CryO2 system for additional features and improve routing.

  • Brand: Design Engineering
  • ASIN: B0039Z3VMW
  • UPC: 607078802163

DEI 080250 CryO2 Silicone Connector Sleeve, 2.5" - Black

DEI 080250 CryO2 Silicone Connector Sleeve, 2.5" -

DEI Silicone Connector Sleeve. CryO2 accessories are precision made from the finest materials then maticulously tested to perform at the highest level possible.

  • Brand: Design Engineering
  • ASIN: B0039Z3W1M
  • UPC: 607078802507

Design Engineering DEI 080108 CryO2 Intercooler Sprayer Kit

Design Engineering DEI 080108 CryO2 Intercooler Sprayer

The CryO2 Intercooler Sprayer Kit includes everything needed to enhance the intercooler's thermal transfer ability and improve it's efficiency by as much as 50%. Kit includes: 10 lb. tank and brackets, Cryogenic solenoid valve, 14 ft. stainless steel braided supply line, Arming, activation, and WOT switches, All necessary CO2 fittings and electrical hardware, 16" x 5" front-mount intercooler sprayer and hardware.

  • Color: N/A
  • Brand: Design Engineering
  • ASIN: B0039Z5YFY
  • UPC: 607078801081

DEI 080231 Full Wide Open Throttle Switch Bracket For Existing CryO2 Systems

DEI 080231 Full Wide Open Throttle Switch Bracket

Put the put the finishing touches on your existing CryO2 installation with the Full Wide Open Throttle Switch Bracket. CryO2 accessories are precision made from the finest materials then maticulously tested to perform at the highest level possible.

  • Brand: Design Engineering
  • ASIN: B0039Z3VRM
  • UPC: 607078802316

DEI 080125 CryO2 Cryogenic Fuel Chilling System

DEI 080125 CryO2 Cryogenic Fuel Chilling

the CryO2 Fuel Chiller System is DEI's next generation method of chilling the temperature of fuel before entering the intake stream. The new CryO2 Fuel Chiller System uses the cryogenic properties of liquid CO2 to charge a series of internal cryogenic chambers surrounding the center "fuel" chamber. As the fuel passes through the center chamber, the cryogenic-charged chambers super cool the fuel by maximizing the thermal transfer process removing heat four times more effectively than any other system available today. As the temperature of fuel is reduced it increases in density. The denser fuel results in better and more efficient burning of the fuel - consequently generating more power and greater fuel efficiency. Under hood heat created by high pressure fuel pumps, headers, exhaust manifolds and other heat generating components all combine to raise the temperature of fuel and creates a potentially lean condition or "vapor lock" that can damage the engine. The CryO2 Fuel Chiller System can be used along with your existing CryO2 system, or a nitrous oxide system, to lower fuel temperatures and improve HP and efficiency and reduce the chances of engine damage. Each CryO2 Fuel Chiller System comes complete with two (2) -4AN and -6AN fittings as well as two (2) 3/8" barb fittings and...

  • Brand: Design Engineering
  • ASIN: B0039Z5YO0
  • UPC: 607078801258

DEI 080120 CryO2 Polished Cryogenic Fuel Bar - 6 AN

DEI 080120 CryO2 Polished Cryogenic Fuel Bar -

The CryO2 Fuel Bar is a billet aluminum extension to the fuel line with a cryogenic chamber. The bar is charged with liquid CO2 and freezes to -80°F. Heat is removed from the fuel as it passes through resulting in a colder denser fuel charge. The CryO2 Fuel Bar is available in -6AN, -10AN and can be reduced for -8AN fuel line size. Four Cryo-Ports allow versatility of installation. Each Fuel Bar comes complete with vent plug, Cryo-Port plugs and connection/vent hose. The CryO2 Fuel Bar can be used alone or in conjunction with other CryO2 components. Available in either anodized or polished finish with engraved CryO2 logo. Measures 1.5" W x 6" L x 1" thick.

  • Brand: Design Engineering
  • ASIN: B000MY0N2O
  • UPC: 607078801203

Design Engineering 080214 Brass Fitting -4AN Male And 1/4 in. NPT Female Brass Fitting

Design Engineering 080214 Brass Fitting -4AN Male And

All CryO2 components are designed to work seamlessly with all CryO2 systems and kits. We create all of our components with the highest quality materials and the most stringent manufacturing processes.

  • Brand: Design Engineering
  • ASIN: B01A5W8C84
  • UPC: 607078802149
Similar Cryo2 Systems Shopping Results