CMT 806.690.11 Super-Duty Flush Trim Bit, 1/2-Inch Shank, 2-Inch Cutting Length, Carbide-Tipped

CMT 806.690.11 Super-Duty Flush Trim Bit, 1/2-Inch Shank,

The finest of the extensive line of CMT flush trim bits with ball bearing guide. A negative shear angle cutting edge and 3/4” cutting diameter set CMT flush trim bits apart from standard bits. Work quickly and safely to get a superior finish with absolute minimal chipping. This bit features super-strength superior steel body, Non-Stick Orange Shield Coating and cutting edges made of SinterHip Hi-Density Industrial Chrome Carbide for a long-lasting performance. After a test performed by Wood Magazine, CMT orange bits have been rated the first overall router bits compared to other brands.

  • Color: Orange
  • Brand: CMT
  • ASIN: B000K29S5G
  • UPC: 664252002160

CMT 806.191.11 Super-Duty Flush Trim Bit, 1-Inch Cutting Length, 1/4-Inch Shank

CMT 806.191.11 Super-Duty Flush Trim Bit, 1-Inch Cutting

New super duty bit which represents the finest of the extensive line of CMT flush trim bits with ball bearing guides. A negative shear angle cutting edge and 3/4-Inc cutting diameter set CMT flush trim bits apart from standard bits. Work quickly and safely to get a superior finish with absolute minimal chipping. Safety tip: dust and chips from laminate materials are hazardous to your health and safety. Always wear a dust mask and eye protection when doing router work.

  • Color: Orange
  • Brand: CMT
  • ASIN: B000P4JMPK
  • UPC: 664252002115

CMT 806.690.11B Flush Trim Bit with Double Bearing, 2-Inch Cutting Length and 1/2-Inch Shank

CMT 806.690.11B Flush Trim Bit with Double Bearing,

Innovative two-flute router bit equipped with a double bearing and feature a down shear design, which allows for clean smooth cuts on many materials. Therefore it is no longer necessary to flip or move your tool if you need to ride it from either direction to the other side of your workpiece. You will benefit from this tool especially when routing curved elements along or against the grain. CMT orange bits have been rated the #1 overall router bits compared to other brands (Wood Magazine).

  • Brand: CMT
  • ASIN: B009WSDWRY
  • UPC: 664252035694

CMT 806.692.11 Super-Duty Flush Trim Bit with 1-1/2-Inch Cutting Length and 1/2-Inch Shank

CMT 806.692.11 Super-Duty Flush Trim Bit with 1-1/2-Inch

This tool represents the finest of the extensive line of CMT flush trim bits with ball bearing guides. A negative shear angle cutting edge and 3/4" cutting diameter set CMT flush trim bits apart from standard bits. Work quickly and safely to get a superior finish with absolute minimal chipping. Bit equipped with 2 cutting edges and featuring heavy-duty steel body for endurance. CMT orange bits have been rated the #1 overall router bits compared to other brands (Wood Magazine).

  • Brand: CMT
  • ASIN: B00F9A4X40
  • UPC: 664252026968

Yonico 14134 Flush Trim Router Bit with 2-Inch Long Cutter, Top and Bottom Bearing 1/2-Inch Shank

Yonico 14134 Flush Trim Router Bit with 2-Inch

The Yonico 14134 Top and Bottom Bearing Router Bit is great for all your large stock trim applications. This bit can be used with either a top or bottom template. Especially useful for template work when routing rounded or curvy wood. The top and bottom bearings allow you to flip over the wood stock when you reach "up-grain" and rout that segment in a "down-grain" direction, maintaining uniform smoothness around the work-piece.

  • Brand: Yonico
  • ASIN: B00KZM1JI0
  • UPC: 732454551363

Uxcell a14101300ux0197 2pcs 3" Long 2 Edges Flush Trim Router Bit 1/4" x 1/4" for Carpenter (Pack of 2)

Uxcell a14101300ux0197 2pcs 3" Long 2 Edges Flush

Features: flush trim router bit, double edged, straight shank, end bearing, used to cut plywood, hardwood, soft wood, etc.

  • Color: Blue
  • Brand: uxcell
  • ASIN: B00REGVYJ4
  • UPC: 702105932346

WHITESIDE PART #2402 CARBIDE-TIP FLUSH TRIM 2 FLUTE ROUTER BIT W/BEARING 1/2 DIA X 1" CL X 1/4" SHANK

WHITESIDE PART #2402 CARBIDE-TIP FLUSH TRIM 2 FLUTE

WHITESIDE MACHINE 2402 CARBIDE-TIP FLUSH TRIM 2 FLUTE ROUTER BIT W/BEARING 1/2 DIA X 1" CL X 1/4" SHANK X 2-1/2" OAL

  • Brand: Whiteside
  • ASIN: B000AM31PY
  • UPC: 733353380474

CMT 806.690.11 Super-Duty Flush Trim Bit, 1/2-Inch Shank, 2-Inch Cutting Length, Carbide-Tipped by CMT

CMT 806.690.11 Super-Duty Flush Trim Bit, 1/2-Inch Shank,

  • ASIN: B0186ILNZS
  • UPC: 785533206586

CMT 806.691.11 Super-Duty Flush Trim Bit, 1/2-Inch Shank, 1-Inch Cutting Length, Carbide-Tipped

CMT 806.691.11 Super-Duty Flush Trim Bit, 1/2-Inch Shank,

The finest of the extensive line of CMT flush trim bits with ball bearing guide. A negative shear angle cutting edge and 3/4” cutting diameter set CMT flush trim bits apart from standard bits. Work quickly and safely to get a superior finish with absolute minimal chipping. This bit features super-strength superior steel body, Non-Stick Orange Shield Coating and cutting edges made of SinterHip Hi-Density Industrial Chrome Carbide for a long-lasting performance. After a test performed by Wood Magazine, CMT orange bits have been rated the first overall router bits compared to other brands.

  • Color: Orange
  • Brand: CMT
  • ASIN: B000P4NR06
  • UPC: 664252002177

Whiteside Router Bits 2560 Down Shear Flush Trim Bit with 3/4-Inch Cutting Diameter and 5/8-Inch Cutting Length

Whiteside Router Bits 2560 Down Shear Flush Trim

Combinations bits provide a dual use in one bit. Usually used with a guide on your router, you can flush trim off excess material and then come back and bevel the edge using the same bit.

  • Brand: Whiteside Router Bits
  • ASIN: B000K2G494
  • UPC: 844278025606

6.5-Amp 1.25 HP Compact Router with Fixed Base, 5 Trim Router Bits, Variable Speed, Edge Guide, Roller Guide and Dust Hood, Avid Power MW104

6.5-Amp 1.25 HP Compact Router with Fixed Base,

100% SATISFACTION GUARANTEE. We guarantee satisfaction with Avid Power, or your money back. All Avid Power Product come with Two Years guarantee. If you have ANY issues, please feel free to contact us. Avid Power US based customer service are available 7 days a week to help. Your Excellent Helper for Your Various Routing and Trimming Projects Avid Power 6.5-Amp 1.25 HP wood router tool with fixed base, variable speed, dual LED working lights, edge guide, roller guide and dust hood, is perfect for a variety of routing and trimming applications. Its smooth rack-and-pinion depth adjustment system provides precise depth adjustment. Specifications: Voltage rating:120V,60Hz,AC Amperes: 6.5Amp No load speed: 10000-32000rpm Collet capacity:1/4" 3/8" Plunge range: 0-7/8" Weight: 5.2 lbs What's in the Box 1x Avid Power 1.25 HP compact router 1x Straight-edge guide assembly 1x Roller guide assembly 1x Dust hood 1x 1/4" Straight bit 1x 3/8" Straight bit 1x R1/4" Round over bit 1x 3/8" Flush trim bit 1x R1/4" Cove bit 1x 3/8" Collet 1x 1/4" Collet 1x Wrench 2x Carbon brushes 1x Tool bag

  • Brand: Avid Power
  • ASIN: B07CQK4ZL4
  • UPC: 693495980089

Neiko 10115A Premium Tungsten Carbide Router Bits | 80-Piece Set | Aluminum Storage Case

Neiko 10115A Premium Tungsten Carbide Router Bits |

Includes all of these bits: Ten three-blade router bits: straight: 1/2, 5/8, 3/4 and 1"; flush trim: 1/2, 1/2 x 1"; slot cutter: 1/4, 3/8, 5/16 and 1/2". 70 two-blade bits: 25 degree trimming: 1/2"; 30 degree trimming: 1/2"; flush trim: 3/8", 3/8" x 1"; Corner round: 1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4" and 1"; cove: 1/8, 3/16, 1/4, 5/16, 3/8 and 1/2"; beading: 1/4, 3/8, 5/8, 3/4 and 1"; Roman ogee: 5/16, 1/2; Classical cove: 1/2"; Classical: 3/8 and 1/2" ; Ogee flute: R3/16"; Double Roman: 1/4 and 5/8"; wave edge: 5/16"; 60 degree horse-nose: 5/8; Rabbeting: 3/8"; 45 degree chamfer: 1/2"; 30 degree chamfer: 5/8"; 22.5 degree chamfer: 3/4"; 15 degree chamfer: 7/8"; cove box: 1/4, 3/8, 1/2 and 5/8"; V-grooving: 1/4, 3/8, 1/2 and 5/8"; round nose: 1/4, 1/8 and 1/2"; dovetail: 1/4, 3/8, 1/2, 5/8 and 3/4"; panel pilot: 3/8"; keyhole: 3/8"; cleaning-bottom: 3/4"; 60 degree V-grooving: 5/8"; straight: 3/16, 1/4, 5/32, 5/16, 3/8 and 7/16"; bottom : 1/2, 5/8 and 3/4"; Classical plunge: 3/4"; bowl tray: 1"

  • Brand: Neiko
  • ASIN: B000HDTYSO
  • UPC: 837013101154

CMT 806.227.11 3-Flute Super Duty Flush Trim Bit with 1-Inch Cutting Length and 1/4-Inch Shank

CMT 806.227.11 3-Flute Super Duty Flush Trim Bit

We have designed an indispensable 3-flute flush trim bit for your woodworking needs and your most difficult projects. For precision work and longer lifetime on laminates or quick template work with excellent finishing.

  • Brand: CMT
  • ASIN: B00LI4ZRD2
  • UPC: 664252036936

Bosch Benchtop Router Table RA1181

Bosch Benchtop Router Table

The Bosch RA1181 benchtop router table provides a large work surface for woodworking and routing. Designed to fit a variety of routers, this router table is a versatile piece of equipment that will serve as an indispensable part of any woodworking shop. Its 2-1/2 inch dust collection port offers better dust collection for a cleaner work environment. The large aluminum top makes the table both durable and portable. This benchtop router table includes mounting hardware, features a tall aluminum fence with adjustable MDF face plates, two outfeed shims, and an aluminum router mounting plate. The starter pin and guard for router curved workpieces is also included, in addition to the built-in cord wrap for convenient storage and portability.

  • Brand: Bosch
  • ASIN: B000H12DQ6
  • UPC: 000346353679

Makita RT0701C 1-1/4 HP Compact Router

Makita RT0701C 1-1/4 HP Compact

1-1/4 HP motor delivers 6.5 Amps for improved performance. Heavt Duty aluminum motor for increased durability

  • Color: Teal
  • Brand: Makita
  • ASIN: B00E7D3V4S
  • UPC: 758353348903

Floradis Pull and Flush Handle Set 12 Inches for Sliding Barn Door. Fit Doors Up To 2 1/3". Flush Mount Back Plate. 3 Pairs Of Different Length Screws. Frosted Black Satin Powder Coating Hardware

Floradis Pull and Flush Handle Set 12 Inches

Floradis Round Barn Door Handles 12" are designed for U.S market to ensure the highest quality and standard for your home, office, hotel, kitchen furniture, bi-fold closet, gate door, bathroom, bedroom, front entry doors, room partition, white or any color. Rustic, Vintage, Antique or Modern Elegant Style - Industrial Construction, Home or Office use. This two-side flush pull barn door hardware can not only improve the beauty of the door but also ensure the safety of the door panel surface. Also is strong and durable for maximum efficiency so it will never break. Why is our sliding barn door handle the best on the market?:✅ VERSATILE - THREE PAIRS OF SCREWS ✅FLUSH ULTRA SLIM BACK PLATE - no need to cut a recess into your door ✅ PREMIUM QUALITY - Matte Black Powder Coat Steel Surface finished with a powder coating for enhanced durability and corrosion protection✅BONUS - Sliding Barn Door Hook Latch Lock HardwareA complete backup accessory pack are offered inside with a clear instruction manual to finish the whole mounts effortlessly Mounting Instructions - Hassle Free: Complete accessories. Drill two holes in the door to combine the handle iron rod and finger pull flush back plate with the two screw with appropriate length based on your door thickness Package includes: 1...

  • Color: Black
  • Brand: Floradis
  • ASIN: B076JHTXY6
  • UPC: 652671343377

SOSS Wood Router Guide Template for #208 Invisible Hinges, 3/8" Bit

SOSS Wood Router Guide Template for #208 Invisible

Soss wood router guide template. Soss invisible hinges now can be installed easier and faster than ever before. Each router guide template is individually handcrafted for exactness. The template is held on the door and jamb with nails; guide pins locate the deep mortise. The edges of the template assure a perfect outline when used with Soss RGB100 template guide and lock nut, or the porter-cable template guide #42024 (lock face routing) and #42237 (lock nut). 3/8" Router bit size.

  • Brand: SOSS
  • ASIN: B0006LA2Q0
  • UPC: 027769208508

KSEIBI 103119 1/4 Inch Shank Tungsten Carbide Router Bit Set Woodworking (12Pack)

KSEIBI 103119 1/4 Inch Shank Tungsten Carbide Router

You will get: ■ 1Pcs V-Groove Bit: The aptly named bit cuts decorative V-shaped grooves in cabinet doors, drawer faces, table legs, and wall paneling. ■ 1Pcs Core Box Bit: This is a nonpiloted router bit that cuts round-bottomed grooves. It's most often used to rout flutes in columns and vertical stiles. ■ 1Pcs Flush-Trim Bit: If you work with plastic laminate or wood veneer, then get yourself a flush-trim router bit. This straight-cutting bit has a ball-bearing pilot that permits you to trim overhanging surfaces perfectly flush with the substrate. ■ 1Pcs Cove Bit: A cove bit is essentially the opposite of a rounding-over bit. Instead of simply rounding the edge, it cuts a concave radius out of the edge. ■ 1Pcs Roman Ogee Bit: Perhaps the most popular of all edge-shaping bits, Roman ogee router bits have a distinctive profile for cutting classical decorative detailing into the edges of tabletops, picture frames, vertical stiles, and horizontal rails. ■ 4Pcs Straight-Cutting Bit: As its name implies, this bit cuts straight, square-bottomed grooves. Use this bit to cut rabbets, dadoes, and grooves for plywood cabinet backs and drawer bottoms. ■ 2Pcs Rounding-Over Bit: Use this edge-shaping bit on the edges of shelves, tabletops, chair arms, and other places where you'...

  • Color: Orange
  • Brand: KSEIBI
  • ASIN: B075JBLG85

CMT 806.128.61 Diamond Flush Trim bit for MDF/Laminates, 7/16-Inch Cutting Length, 1/4-Inch Shank

CMT 806.128.61 Diamond Flush Trim bit for MDF/Laminates,

New super duty DP (polycrystalline diamond) bit which represents the ultimate in the extensive line of CMT flush trim bits. Save time and money, since this bit lasts 40 times longer than conventional carbide tipped flush trim bits.

  • Brand: CMT
  • ASIN: B0027FF4L6
  • UPC: 664252025268

CMT 806.127.11 Flush Trim Router Bit 1/4-Inch Shank, 1/2-Inch Bearing, 1/2-Inch Cutting Diameter, 1-Inch Cutting Length

CMT 806.127.11 Flush Trim Router Bit 1/4-Inch Shank,

CMT Flush Trim bits feature premium micrograin carbide edges and our trademark orange coating. Our Super Duty Flush Trim Bits (item #806.690.11 & 806.691.11) go a couple of steps further, with a negative shear angle cutting edge and 3/4" cutting diameter that make these tools perfect for your toughest and most critical trim jobs. Downward shear cutting action virtually eliminates any chipping or splintering on the top surface of the workpiece, even when the job requires fast cuts in delicate materials.

  • Brand: CMT
  • ASIN: B000P4LOMY
  • UPC: 664252002092

Ian's Choice Router Bit Set 3 Teeth Adjustable 1/2 Inch Shank T Shape Wood Milling Cutter Woodworking Tools and Accessories Router Bits, Biscuit Joiner,Tongue and Groove Bit Set Routers tool

Ian's Choice Router Bit Set 3 Teeth Adjustable

✔PURELY AMAZINGSimple construction, easy to operate. Solid fortified steel bodies with anti kickback design and heat resistant teflon coating. Totally enclosed and lubricated.1/2 Inch Shank.✔HEAVY DUTYHeavy duty and good quality and come with a small storage box to keep them in.✔LOVED BY PROFESSIONALSThinking about Father's Day Gift? This is perfect for woodworking professionals and hobbyists!✔AWESOME WOODWORKING TOOLSPerfect to make your own hardwood floor, drawers, or doors. Get your woodworking power on!✔LIFETIME WARRANTY Love it or we'll buy it back from you, no questions asked!

  • Color: Yellow
  • Brand: Ian's Choice
  • ASIN: B07BT2GYKF

CMT 800.515.11 Six Piece Kitchen Cove Cabinetmaking Router Bit Set with 1/2" Shank

CMT 800.515.11 Six Piece Kitchen Cove Cabinetmaking Router

The set features six router bits designed for making professional-quality arched raised panel doors and drawer fronts. You will get:RAISED PANEL BIT WITH BACK CUTTER: This 3-1/2" diameter bit has a back cutter which allows milling of both the front and back of the panel in the same cut. An additional 1-1/4" diameter bearing promotes safety by allowing you to take two shallow passes. Choose the Cove (A) or (B) Ogee profile.OGEE RAIL AND STILE SET: Two perfectly matched bits eliminate the frustration and time-consuming set-up of reversible cutters. The stile cutter also features a shear angle to produce superior cuts.SUPER DUTY FLUSH TRIM BIT: The 3/4" cutting diameter gives a superior cut with minimal chipping, even on end grain.OGEE DOOR EDGE BIT: A subtle cove followed by a small roundover adds an elegant touch to the door edge.DRAWER FRONT BIT: This unique bit makes a mini-raised panel cut on the outside edges of the drawer fronts.

  • Brand: CMT
  • ASIN: B000HKLH32
  • UPC: 664252001866

CMT 806.691.11 Super-Duty Flush Trim Bit, 1/2-Inch Shank, 1-Inch Cutting Length, Carbide-Tipped by CMT

CMT 806.691.11 Super-Duty Flush Trim Bit, 1/2-Inch Shank,

  • ASIN: B0186JQPPU
  • UPC: 785533447668

Cmt Cmt806.691.11 .75 in. Dia .50 in. Shank Super Duty Flush Trim Bit

Cmt Cmt806.691.11 .75 in. Dia .50 in. Shank

This new super 3/4" cutting diameter set CMT Flush Trim bits apart from standard bits. Work quickly and safely to get a superior finish with absolutely minimal chipping. Cut Diameter: 3/4". Cut Length / Outside Diameter: 1". Shank Diameter: 1/2".

  • Brand: CMT
  • ASIN: B00B5101JS

Cmt Cmt806.690.11 .75 In. Dia Super Duty Flush Trim Bit

Cmt Cmt806.690.11 .75 In. Dia Super Duty Flush

  • ASIN: B00B5101A2

1 piece 1PC 8mm Shank Template Trim Hinge Mortising Router Bit Straight end mill trimmer cleaning flush trim Tenon Cutter forWoodworking

1 piece 1PC 8mm Shank Template Trim Hinge

Brand Name: CHWJW Model Number: 60030 Diameter: 3/4 Material: Carbide Type: End Mill

  • Color: 38.1mm
  • Brand: ONE FIVE DAY
  • ASIN: B07S3RLMLX
  • UPC: 304363684144

GHP 15 PC Wood Shops Case 1/4" Bearing Tools Roman Ogee Router Bit

GHP 15 PC Wood Shops Case 1/4" Bearing

Features: Cove Box R1/8", 1/2" & R1/4" Without Ball Bearing - Straight 1/8", 1/4", 1/2" & 5/8" R1/4" Cove Bit & 5/32" Roman Ogee 90 Degree Grooving - 1/2" Mortising, 1/4" Panel Pilot & 1/2" Dovetail 3/8" Corner Round & 1-1/4" 45 Degree Chamfer With Ball Bearing -1/2" Flush Trim

  • Brand: Globe House Products
  • ASIN: B010E3A994
  • UPC: 733556343405

1 piece 1Pc Flush Trim 1/2x3/4inch Router Bit Shank Bearing 1/4 Shank Drill Bit Woodworking Milling Cutter Polishing Head Tool for Wood

1 piece 1Pc Flush Trim 1/2x3/4inch Router Bit

Brand Name: MEALU Material: Tungsten Cobalt Alloy Type: End Mill Diameter: Blade diameter 1/2 inch

  • Brand: ONE FIVE DAY
  • ASIN: B07SHVGYY6
  • UPC: 304361182185

Industrial Tool Accessories Shank Top & Bottom Flush Trim Router Bit Bearing Milling Cutter 1H X 1/4in

Industrial Tool Accessories Shank Top & Bottom Flush

♥ ROLYPOBI was established in 2214 ♥ our aim is to be sincere and sincere to our customers.♥ Our wish is to provide customers with the most satisfactory products. ♥ If you have any comments or suggestions on our products, please send them to us by email.♥ we will be happy to help you. Happy every day!

  • Color: Black
  • Brand: ROLYPOBI
  • ASIN: B07SS1FRRC

1 piece 1PCS 8mm Shank Wood Router Bit Straight End Mill Trimmer Cleaning Flush Trim Corner Round Cove Box Bits Tools Milling Cutter

1 piece 1PCS 8mm Shank Wood Router Bit

Material: Tungsten Cobalt Alloy Type: Face Mill Model Number: Router bit set Diameter: Face Mill Overall Length: As description Degree: R0.2

  • Color: 1
  • Brand: ONE FIVE DAY
  • ASIN: B07SH6QS2F
  • UPC: 304361203491

Bull Ring 4001-XT Truck Bed Tie Downs 1 Pair | New & Improved | Fits 98-14 F-150 and 98-16 Super Duty | 99-13 Silverado Sierra (Does Not Fit 3500) | 95-18 RAM 09-18 Ram Rail Cap Cut Required

Bull Ring 4001-XT Truck Bed Tie Downs 1

New and Improved 4001 from Bull Ring Factory Direct. Lots of new features: Stainless Steel - no rust chassis, brass nut-serts for extra- never-bind strength, Glass filled nylon lower body for sound proofing and rust resistance and super extra strength. The best and still the original- finest Bull Ring ever made. the ALL NEW 4001 XT If you have a Ford Truck, and you also have a Tonneau Cover, you may prefer our FLUSH FIT Models # 4025 & 4028. Search Bull Ring 4025 or 4028 on Amazon.

  • Brand: Bull Ring
  • ASIN: B0108MF9TG

Industrial Tool Accessories Wood Edge Cutting End Dual Flute Bearing Cutter Bit Flush Trim Router

Industrial Tool Accessories Wood Edge Cutting End Dual

♥ ROLYPOBI was established in 2215 ♥ our aim is to be sincere and sincere to our customers.♥ Our wish is to provide customers with the most satisfactory products. ♥ If you have any comments or suggestions on our products, please send them to us by email.♥ we will be happy to help you. Happy every day!

  • Color: Red
  • Brand: ROLYPOBI
  • ASIN: B07SQ2WZH3

Bull Ring 9044 - for 2014-18 Tundra Crew Max Low Profile, Retractable Factory Direct 1 Pair

Bull Ring 9044 - for 2014-18 Tundra Crew

This is a low-profile, thin, flush, stainless steel Bull Ring for the New, 2019 RAM and 14-18 Tundra Crew Max and also the 2010-2019 Nissan Titan. The rail cap must be trimmed on all those trucks. It is best to use the Bull Ring patented Router Bit system, if you have access to an American router which allows a 1/4" shaft. Once the plastic rail cap is open and exposed to the same dimensions and location as the hidden steel hole underneath, Bull Rings can be installed in minutes with no extra drilling or special tools. Just be careful not to over tighten. Video is available on RAM installation and on Bull Ring USA.

  • Brand: Bull Ring
  • ASIN: B00TH6LQXI
  • UPC: 069372090446
Similar Duty Flush Trim Router Bit Shopping Results