Enerpac P-392 2 Speed Lightweight Hand Pump

Enerpac P-392 2 Speed Lightweight Hand

This Enerpac high-pressure, two-speed lightweight hydraulic hand pump is for lifting, bolting, or applying pressure in construction, manufacturing, and maintenance and repair applications. The nylon-covered aluminum base, glass-filled nylon reservoir, and fiberglass handle provide corrosion resistance and are lighter than steel hydraulic hand pumps. The hand pump has a pressure rating of 10,000 pounds per square inch (psi) and an internal pressure relief valve that protects against overloading the pump. The two-speed operation requires up to 78% fewer handle strokes than single-speed hydraulic hand pumps, and the handle locks into place for secure transport. The pump has a 3/8" National Pipe Taper (NPT) threads port for connecting to a hose or gauge (sold separately). The pump has a first-stage pressure rating of 200 psi and a second-stage pressure rating of 10,000 psi. The oil displacement per stroke is 0.687 cubic in. during the first-stage and 0.151 cubic in. during the second stage. The reservoir has a capacity of 55 cubic in., the maximum handle effort is 93 lb., and the piston stroke is 1". The pump measures 7.00 x 21.00 x 4.75 inches (H x W x D) and weighs 9 lb. (H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from lef...

  • Brand: Enerpac
  • ASIN: B001HWBYC8
  • UPC: 662005107070

Enerpac P-80 2 Speed Steel Hand Pump

Enerpac P-80 2 Speed Steel Hand

The Enerpac P-80 high-pressure, two-speed hydraulic hand pump is for lifting, bolting, or applying pressure with a hydraulic cylinder (sold separately) in intermittent and non-repetitive construction, manufacturing, and maintenance and repair applications. It can advance and release a single-acting cylinder. This two-speed hand pump requires fewer handle strokes to move a load than a similarly rated single-speed pump, increasing productivity. An internal pressure relief valve helps protect the pump from overload. The vent-free reservoir helps prevent oil from spilling and is for use in non-vented applications. The pump can be operated in either the horizontal or vertical position. The steel body resists corrosion and wear, and the chrome-plated plunger and wiper system help extend the life of the pump. An ergonomically designed grip helps reduce operator hand fatigue, and the pump has a built-in carrying handle for transport. The pump has a 3/8" National Pipe Taper (NPT) threads port for connecting to a hose or gauge (sold separately).SpecificationsMaximum operating pressure, first stage500 pounds per square inch (psi)Maximum operating pressure, second stage10,000 psiMaximum oil displacement, per stroke, first stage1.00 cubic inchMaximum oil displacement, per stroke, second stage...

  • Brand: Enerpac
  • ASIN: B001HW6W2A
  • UPC: 662005107407

Enerpac P-39 Single Speed Steel Hand Pump

Enerpac P-39 Single Speed Steel Hand

The Enerpac P-39 high-pressure, single-speed hydraulic hand pump is for lifting, bolting, or applying pressure with a hydraulic cylinder (sold separately) in intermittent and non-repetitive construction, manufacturing, and maintenance and repair applications. It can advance and release a single-acting cylinder. This single-speed hand pump is for applications with a constantly applied load. An internal pressure relief valve helps protect the pump from overload. The vent-free reservoir helps prevent oil from spilling and is for use in non-vented applications. The pump can be operated in either the horizontal or vertical position. The steel body resists corrosion and wear, and the chrome-plated plunger and wiper system help extend the life of the pump. An ergonomically designed grip helps reduce operator hand fatigue, and the pump has a built-in carrying handle for transport. The pump has a 3/8" National Pipe Taper (NPT) threads port for connecting to a hose or gauge (sold separately).SpecificationsMaximum operating pressure10,000 psiMaximum oil displacement, per stroke0.15 cubic inchUsable oil capacity47 cubic ininchesPiston stroke1.00 inchMaximum handle effort85 lb.Weight13.6 lb.Dimensions6.39 x 18.91 x 5.51 inches (H x W x D)H is height, the vertical distance from lowest to highe...

  • Brand: Enerpac
  • ASIN: B000LDGCPI
  • UPC: 662005107056

Enerpac P-391 Single Speed Lightweight Hand Pump

Enerpac P-391 Single Speed Lightweight Hand

The Enerpac P-391 high-pressure, single-speed, lightweight hydraulic hand pump is for lifting, bolting, or applying pressure with a hydraulic cylinder (sold separately) in intermittent and non-repetitive construction, manufacturing, and maintenance and repair applications. It can advance and release a single-acting cylinder. This single-speed hand pump is for applications with a constantly applied load. An internal pressure relief valve helps protect the pump from overload. The glass-filled nylon reservoir, nylon-covered aluminum base, and fiberglass handle provide corrosion resistance and are lighter than steel hydraulic hand pumps. The handle locks into place for secure transport. The pump has a 3/8" National Pipe Taper (NPT) threads port for connecting to a hose or gauge (sold separately).SpecificationsMaximum operating pressure10,000 psiMaximum oil displacement, per stroke0.151 cubic inchUsable oil capacity55 cubic inchesPiston stroke1.00 inchMaximum handle effort85 lb.Weight9 lb.Dimensions7.00 x 21.00 x 4.75 inches (H x W x D)H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from back to front.Hydraulic pumps lift, bolt, or apply pressure to objects by pressurizing and ...

  • Brand: Enerpac
  • ASIN: B000S1UA1U
  • UPC: 662005107063

Enerpac P-142 2 Speed Hand Pump

Enerpac P-142 2 Speed Hand

The Enerpac P-142 high-pressure, lightweight two-speed hydraulic hand pump is for lifting, bolting, or applying pressure with a hydraulic cylinder (sold separately) in intermittent and non-repetitive construction, manufacturing, and maintenance and repair applications. It can advance and release a single-acting cylinder. This two-speed hand pump requires fewer handle strokes to move a load than a similarly rated single-speed pump, increasing productivity. An internal pressure relief valve helps protect the pump from overload. The glass-filled nylon reservoir, nylon-covered aluminum base, and fiberglass handle provide corrosion resistance and are lighter than steel hydraulic hand pumps. The handle locks into place for secure transport. The pump has a 1/4" National Pipe Taper (NPT) threads port for connecting to a hose or gauge (sold separately).SpecificationsMaximum operating pressure, first stage200 pounds per square inch (psi)Maximum operating pressure, second stage10,000 psiMaximum oil displacement, per stroke, first stage0.221 cubic inchMaximum oil displacement, per stroke, second stage0.055 cubic inchUsable oil capacity20 cubic inchesPiston stroke0.5 inchMaximum handle effort78 lb.Weight5.3 lb.Dimensions5.63 x 13.25 x 3.75 inches (H x W x D)H is height, the vertical distance ...

  • Brand: Enerpac
  • ASIN: B001HW87QE
  • UPC: 662005107209

Enerpac P-50 Single Speed Low Pressure Hand pump with 5000 Pounds Per Square Inch

Enerpac P-50 Single Speed Low Pressure Hand pump

The Enerpac P-50 low-pressure, single-speed hydraulic hand pump is for lifting, bolting, or applying pressure with a hydraulic cylinder (sold separately) in intermittent and non-repetitive construction, manufacturing, and maintenance and repair applications. It can advance and release a single-acting cylinder. This single-speed hand pump is for applications with a constantly applied load. It pumps oil using both forward and reverse handle strokes, which improves efficiency when there is limited mounting space. An external load release valve and internal pressure relief valve help protect the pump from overload. The pump can be operated in either the horizontal or vertical position. The pump has a 1/4" National Pipe Taper (NPT) threads port for connecting to a hose or gauge (sold separately).SpecificationsMaximum operating pressure5,000 psiMaximum oil displacement, per stroke0.29 cubic inchUsable oil capacity200 cubic inchesPiston stroke1.50 inchesMaximum handle effort60 lb.Weight37 lb.Dimensions26.94 x 9.43 x 6.82 inches (H x W x D)H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from back to front.Hydraulic pumps lift, bolt, or apply pressure to objects by pressurizing and...

  • Brand: Enerpac
  • ASIN: B002M3OEDM
  • UPC: 662005107704

Enerpac PA-133 Air Hydraulic Pump with 10,000 Pounds Per Square Inch and Base Mounting Slots

Enerpac PA-133 Air Hydraulic Pump with 10,000 Pounds

The Enerpac PA-133 single-speed hydraulic air pump is for lifting, bolting, or applying pressure with a hydraulic cylinder (sold separately) in plant maintenance, fabrication, production, bolting, vehicle repair, and other applications where compressed air is the preferred power source. It has a three-way control valve for advancing, releasing, or holding a single-acting cylinder. This single-speed pump is for applications with a constantly applied load. The pump is controlled by a treadle that can be operated by hand or by foot. The pump can be operated in either a horizontal or vertical orientation. A swivel coupling provides access to hydraulic connection and pump operation. An internal pressure relief valve helps protect the pump from overload. The pump has base mounting slots. The pump has 3/8" and 1/4" National Pipe Taper (NPT) threads ports for connecting to an air supply or attaching a hose or gauge (sold separately).SpecificationsMaximum operating pressure10,000 pounds per square inch (psi)Maximum output flow rate, per minute, at 0 psi (100 psi inlet pressure)40 cubic inchesMaximum output flow rate, per minute, at 10,000 psi (100 psi inlet pressure)8 cubic inchesUsable oil capacity36 cubic inchesInlet air-pressure range60 to 120 psiAir consumption, at 100 psi9 standard c...

  • Brand: Enerpac
  • ASIN: B006375H0C
  • UPC: 662005100002

Enerpac SCR-102H Single Acting Cylinder Pump Set RC-102 Cylinder with P-392 Hand Pump

Enerpac SCR-102H Single Acting Cylinder Pump Set RC-102

The Enerpac SCR-102H single-acting cylinder pump set includes the P-392 lightweight two-speed hydraulic hand pump and a RC-102 ten-ton capacity general purpose hydraulic cylinder for lifting, bolting, or applying pressure in intermittent and non-repetitive construction, manufacturing, and maintenance and repair applications. The P-392 hand pump has an internal pressure relief valve that protects against overload. The nylon-covered aluminum base, glass-filled nylon reservoir, and fiberglass handle provide corrosion resistance and are lighter than steel hydraulic hand pumps. The two-speed pump requires fewer handle strokes to move a load than a similarly rated single-speed pump, increasing productivity. The handle locks into place for secure transport. The set also includes a 6’ safety hose, a 10-ton hydraulic force and pressure gauge, and 1/2" gauge adaptor to connect to the pump’s 3/8" National Pipe Taper (NPT) threads port. Specifications Set capacity 10 ton Cylinder 2.13 inches stroke 4.78 inches collapsed height Pump 200 pounds per square inch (psi) first stage maximum operating pressure 10,000 psi second stage maximum operating pressure 0.687 cubic inch per stroke first stage maximum oil displacement 0.151 cubic inch per stroke second stage maximum oil displaceme...

  • Brand: Enerpac
  • ASIN: B006377EX0
  • UPC: 662005803576

Enerpac HC-9206 6' High Pressure Hydraulic Hose CH-604 Coupler 3/8" Thread

Enerpac HC-9206 6' High Pressure Hydraulic Hose CH-604

This Enerpac HC-7206 hydraulic hose is for use with high-pressure applications such as hydraulic jacks and has a maximum working pressure of 10,000 (pounds per square inch) psi. It is 6' in length, with an outer rubber jacket for resistance to abrasion and two layers of steel wire braids for strength and resistance to expansion. It has a rubber strain relief crimped on each end for improved life and durability, with a 3/8" NPTF (National Pipe Thread Fuel) fitting on one end and a CH-604 fitting on the other.Industrial hoses transfer or convey air or liquid in hose systems. When selecting industrial hoses, use the STAMPED method to help determine the type of hose needed:S = Size (ID, OD, and length)T = Temperature (maximum and minimum temperatures of material being transported)A = Application (industry or process)M = Material (to be conveyed, type and concentration)P = Pressure (maximum working pressure)E = Ends (type of end connectors or couplings on hose)D = Delivery method (volume and velocity)The inside diameter of the hose must be adequate to keep pressure loss to a minimum and avoid damage to the hose due to heat generation or excessive turbulence. The hose must be capable of withstanding the minimum and maximum temperatures that occur within the hose system. Some applicatio...

  • Brand: Enerpac
  • ASIN: B001HWDJ1M
  • UPC: 662005203666

Enerpac P-141 Single Speed Hand Pump

Enerpac P-141 Single Speed Hand

The Enerpac P-141 high-pressure, lightweight single-speed hydraulic hand pump is for lifting, bolting, or applying pressure with a hydraulic cylinder (sold separately) in intermittent and non-repetitive construction, manufacturing, and maintenance and repair applications. It can advance and release a single-acting cylinder. This single-speed hand pump is for applications with a constantly applied load. An internal pressure relief valve helps protect the pump from overload. The glass-filled nylon reservoir, nylon-covered aluminum base, and fiberglass handle provide corrosion resistance and are lighter than steel hydraulic hand pumps. The handle locks into place for secure transport. The pump has a 1/4" National Pipe Taper (NPT) threads port for connecting to a hose or gauge (sold separately).SpecificationsMaximum operating pressure10,000 psiMaximum oil displacement, per stroke0.055 cubic inchesUsable oil capacity20 cubic inchesPiston stroke0.5 inchMaximum handle effort72 lb.Weight5.3 lb.Dimensions5.63 x 13.25 x 3.75 inches (H x W x D)H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from back to front.Hydraulic pumps lift, bolt, or apply pressure to objects by pressurizing an...

  • Brand: Enerpac
  • ASIN: B000P1PR84
  • UPC: 662005107155
Similar Enerpac Hand Pump Shopping Results