Freud 3/8" (Dia.) Double Flute Straight Bit with 1/2" Shank (12-108)

Freud 3/8" (Dia.) Double Flute Straight Bit with

Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging. 3/8" Overall Dia (D), 1" Carbide Height (h), 1/2" Shank, 2-5/8" Overall Length (H) Ideal For: Clean cuts in any wood or composite. Application: General stock removal with a smooth finish. Made In Italy.

  • Color: Perma-SHIELD Coating Red
  • Brand: Freud
  • ASIN: B00004T7CH
  • UPC: 008925380146

Amana Tool - 45210 Carbide Tipped Straight Plunge High Production 1/4 Dia x 1" 4 S

Amana Tool - 45210 Carbide Tipped Straight Plunge

Use a Two-Flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution Yield a smooth surface, but feed rate is slightly reduced, #45210, diameter (D): 1/4, cutting height (B): 1, shank (D): 1/4, overall length (L): 2-1/4, flutes: 2, 45210 carbide Tipped straight plunge high production 1/4 dia x 1 inch x 1/4 shank

  • Brand: Amana Tool
  • ASIN: B000JJPR46
  • UPC: 785533287110

Amana Tool - 45440 Carbide Tipped Straight Plunge 3/4 Dia x 1-1/4 x 1/2" Shank

Amana Tool - 45440 Carbide Tipped Straight Plunge

Use a Two-Flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced, #45440, diameter (D): 3/4, cutting Height (B): 1-1/4, Shank (D): 1/2, overall length (L): 2-7/8, flutes: 2, 45440 carbide Tipped straight plunge 3/4 dia x 1-1/4 x 1/2 inch Shank

  • Brand: Amana Tool
  • ASIN: B000WXCJ4K
  • UPC: 738685854402

Amana Tool - 45200 Solid Carbide Cutting Edge Straight Plunge High Production 1/8 Dia x 7

Amana Tool - 45200 Solid Carbide Cutting Edge

Use a Two-Flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. 45200 features a solid carbide cutting edge, #45200, diameter (D): 1/8, cutting Height (B): 7/16, shank (D): 1/4, overall length (L): 2, flutes: 2, 45200 Solid Carbide cutting edge straight plunge high production 1/8 dia x 7/16 x 1/4 inch Shank

  • Brand: Amana Tool
  • ASIN: B000K2DO9W
  • UPC: 738685852002

Hiltex 10100 Tungsten Carbide Router Bits | 15-Piece Set

Hiltex 10100 Tungsten Carbide Router Bits | 15-Piece

Solid carbide flush trim. " With Ball Bearing: Flush Trim Bit: 1/2"" Corner Round Bit:3/4"" 45DegreeChamfer Bit: 1/2"" Cove Bit:1/2"" Roman Ogee Bit:5/16"" ".

  • Color: Original version
  • Brand: Hiltex
  • ASIN: B000KSOOLI
  • UPC: 732454011881

Straight Router Bit Double Flute Plunge Router Bit Carbide Tipped Woodworking Tool 1/4'' Shank Cutting Dia. 5/16 inch

Straight Router Bit Double Flute Plunge Router Bit

  • Color: Cutting Dia. 5/16 inch
  • Brand: TIDEWAY
  • ASIN: B07MFTMCF2
  • UPC: 682604647944

Bosch 85265MC 3/4 In. x 1-1/4 In. Carbide-Tipped Double-Flute Straight Router Bit

Bosch 85265MC 3/4 In. x 1-1/4 In. Carbide-Tipped

Bosch router bits are distinguished for their careful selection of materials, exactly calculated cutting geometry, extended bit life, extra sharp cutting edges and low vibration.

  • Color: Metal
  • Brand: Bosch
  • ASIN: B000GY9SWQ
  • UPC: 000346335446

Bosch 85225MC 3/8 In. x 1 In. Carbide-Tipped Double-Flute Straight Router Bit

Bosch 85225MC 3/8 In. x 1 In. Carbide-Tipped

Bosch router bits are distinguished for their careful selection of materials, exactly calculated cutting geometry, extended bit life, extra sharp cutting edges and low vibration.

  • Brand: Bosch
  • ASIN: B002M8D870
  • UPC: 000346351620

uxcell 1/2-Inch Shank 2-Inch Cutting Dia Double Flute Carbide Tipped Cleaning Bottom Router Bit

uxcell 1/2-Inch Shank 2-Inch Cutting Dia Double Flute

Material: Carbide, SteelStandard: 1/2 Inch x 2 InchShank Diameter: 12.7mm / 1/2 InchCutting Diameter: 50.8mm / 2 InchCutting Depth: 15mm / 0.6 InchOverall Length: 53mm / 2.1 InchColor: Blue, Silver TonePackage Content: 1 x Cleaning Bottom Bit, 1 x Case 1.Mainly used for cutting and smoothing a variety of materials from wood, plywood, MDF and other wood composites, plastics, fiberglass, and solid surface etc.2.Use on CNC and other automatic routers as well as hand held and table mounted portable routers.Note : In order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application.

  • Brand: uxcell
  • ASIN: B01N2UQETH
  • UPC: 709874833539

Whiteside Router Bits RU2100 Standard Spiral Bit with Up Cut Solid Carbide 1/4-Inch Cutting Diameter and 1-Inch Cutting Length

Whiteside Router Bits RU2100 Standard Spiral Bit with

Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction. Several woodworking magazines have tested Whiteside versus the competition and selected Whiteside as the winner for best router bits available in the market. Whiteside Machine Company was founded in 1970 as a general purpose machine shop in the basement of Bill & Bobbie Whiteside's home. Located in Western North Carolina near the furniture manufacturing town of Hickory, the company was often involved in making repairs or special parts for the furniture and woodworking field. A strong commitment to customer problem-solving, a can-do attitude, and innovative ideas, along with a growing core of dedicated employees, helped the business evolve into a manufacturer of woodworking equipment and tooling. Primarily through repeat business and referrals, the tooling business continued to grow to meet a demand for quality production router bits as well as custom application tooling. Today, Whiteside Machine occupies a 40,000 sq. ft. manufacturing facility and produces a complete line of solid carbide and carbide tipped router bits. Whiteside's quality, innovation, and customer commitment is still pr...

  • Color: Basic
  • Brand: Whiteside Router Bits
  • ASIN: B000K2BGNS
  • UPC: 722208798618

Freud 5/16" (Dia.) Double Flute Straight Bit with 1/4" Shank (04-118)

Freud 5/16" (Dia.) Double Flute Straight Bit with

Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging. 5/16" Overall Dia (D), 1" Carbide Height (h), 1/4" Shank, 2-1/2" Overall Length (H) Ideal For: Clean cuts in any wood or composite. Application: General stock removal with a smooth finish. Made In Italy.

  • Color: Red
  • Brand: Freud
  • ASIN: B00004T7BC
  • UPC: 881599014384

HQMaster 1/8" Shank Dia. Double Edged Straight Router Bits Straight End Mill Milling Cutter 2 Flutes CNC Cutting Tungsten Steel Straight Slot Bit Flute Length 17mm, OAL 38.5mm, Pack of 10

HQMaster 1/8" Shank Dia. Double Edged Straight Router

HQMaster 1/8" Shank Dia. Double Edged Straight Router Bits Straight End Mill Milling Cutter 2 Flutes CNC Cutting Tungsten Steel Straight Slot Bit Flute Length 17mm, OAL 38.5mm, Pack of 10 Features: * Rustless and anti-static * Work perfect on milling or cutting machines * Best performance with high precision * High quality and durable Specification: Material: tungsten steel Color: as shown in the picture Number of flutes: 2Overall length (OAL)/Total Length: 38.5mm approx. Cutting edge length(CEL)/Flute Length: 17mm approx. Cutting edge diameter (CED): 3.175mm Shank diameter (SD): 3.175mm Storage case size: 55*52*9mm Package included: 10 x double edged straight slot milling cutter 1 x storage case

  • Color: Silver
  • Brand: HQMaster
  • ASIN: B078MJCZFK

Yonico 14150 Straight Router Bit with 1/2-Inch X 2-Inch Length 1/2-Inch Shank

Yonico 14150 Straight Router Bit with 1/2-Inch X

Use this versatile 2" extra long cutter router bit for all straight cut needs. Two flute carbide cutters and 1/2" shank.

  • Brand: Yonico
  • ASIN: B00KZM1NIQ
  • UPC: 765573826210

Amana Tool - 45415 Carbide Tipped Straight Plunge High Production 3/8 Dia x 1-1/4 x 1/2 In

Amana Tool - 45415 Carbide Tipped Straight Plunge

Use a Two-Flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced, #45415, diameter (D): 3/8, cutting Height (B): 1-1/4, Shank (D): 1/2, overall length (L): 3 flutes: 2, 45415 carbide Tipped straight plunge high production 3/8 dia x 1-1/4 x 1/2 inch Shank

  • Brand: Amana Tool
  • ASIN: B0002DSV74
  • UPC: 738685854150

Rannb Straight Router Bit Double Flutes for Woodworking 1/4" Shank Dia 1/4" Cutting Dia - Pack of 5

Rannb Straight Router Bit Double Flutes for Woodworking

Flute Number: 2 Use on hand-held or table-mounted routers. Please pay attention to the size before ordering to avoid buying wrong item.

  • Brand: Rannb
  • ASIN: B07PXW7GTD
  • UPC: 747130081027

Whiteside Router Bits 1085 Straight Bit with 3/4-Inch Cutting Diameter and 1-Inch Cutting Length

Whiteside Router Bits 1085 Straight Bit with 3/4-Inch

Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction. Several woodworking magazines have tested Whiteside versus the competition and selected Whiteside as the winner for best router bits available in the market. Whiteside Machine Company was founded in 1970 as a general purpose machine shop in the basement of Bill & Bobbie Whiteside's home. Located in Western North Carolina near the furniture manufacturing town of Hickory, the company was often involved in making repairs or special parts for the furniture and woodworking field. A strong commitment to customer problem-solving, a can-do attitude, and innovative ideas, along with a growing core of dedicated employees, helped the business evolve into a manufacturer of woodworking equipment and tooling. Primarily through repeat business and referrals, the tooling business continued to grow to meet a demand for quality production router bits as well as custom application tooling. Today, Whiteside Machine occupies a 40,000 sq. ft. manufacturing facility and produces a complete line of solid carbide and carbide tipped router bits. Whiteside's quality, innovation, and customer commitment is still pr...

  • Brand: Whiteside Router Bits
  • ASIN: B000K2G17O
  • UPC: 844278010855

Bosch 85232MC 3/4 In. x 3/4 In. Carbide-Tipped Double-Flute Straight Router Bit

Bosch 85232MC 3/4 In. x 3/4 In. Carbide-Tipped

Bosch router bits are distinguished for their careful selection of materials, exactly calculated cutting geometry, extended bit life, extra sharp cutting edges and low vibration.

  • Brand: Bosch
  • ASIN: B000GYG2OI
  • UPC: 000346351651

Bosch 85242MC 1/2 In. x 1-1/2 In. Carbide-Tipped Double-Flute Straight Router Bit

Bosch 85242MC 1/2 In. x 1-1/2 In. Carbide-Tipped

Bosch router bits are distinguished for their careful selection of materials, exactly calculated cutting geometry, extended bit life, extra sharp cutting edges and low vibration.

  • Brand: Bosch
  • ASIN: B000GY9SKI
  • UPC: 000346351668

Amana Tool - 45448 Carbide Tipped Straight Plunge High Production 1" Dia x 1-1/4 x 1/2

Amana Tool - 45448 Carbide Tipped Straight Plunge

Use a Two-Flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution Yield a smooth surface, but feed rate is slightly reduced, #45448, diameter (D): 1, cutting height (B): 1-1/4, Shank (D): 1/2, overall length (L): 2-7/8, flutes: 2, 45448 carbide Tipped straight plunge high production 1 inch dia X 1-1/4 x 1/2 shank

  • Brand: Amana Tool
  • ASIN: B0002DSVYC
  • UPC: 738685854488

Amana Tool - 45487 Carbide Tipped Flush Trim Plunge Template 1/2 Dia x 1/2 x 1/4" Shan

Amana Tool - 45487 Carbide Tipped Flush Trim

This bit is essentially a plunge-cutting straight with a shank-mounted ball-bearing pilot. Versatile, useful for template/pattern routing of parts, joints, internal cuts and can be used in handheld and table-mounted routers. The template is attached to the workpiece, and the pilot bearing rides along its edge As the cutting edges rout the workpiece, forming an exact Duplicate of the template. With a handheld router, the pattern is on top of the work; with a table-mounted router, the pattern is underneath the work., #45487, diameter (D) 1/2, cutting height (B) 1/2, shank (D) 1/4, overall length (L) 2, replacement collar 47724, replacement bearing 47701, flutes 2, 45487 carbide Tipped flush trim plunge template 1/2 dia x 1/2 x 1/4 inch shank with upper Bb

  • Brand: Amana Tool
  • ASIN: B001BPB6K6
  • UPC: 738685454879

COMOK 3/8-Inch Cutting Dia 2 Flute Carbide Tipped Straight Plunge High Production Router Bit 1/2-Inch Shank Cutter Lake Blue

COMOK 3/8-Inch Cutting Dia 2 Flute Carbide Tipped

1PCS Straight Router Bit in a pack Material: Steel, Carbide Flute Number: 2 Type: Straight Shank Double Flutes Standard: 1/2-inch x 3/8-inch Shank Diameter: 12.7mm/1/2-inch Cutting Diameter:9.5mm/ 3/8-inch Flute Length: 30mm / 1.2-inch Overall Length: 71.3mm / 2.8-inch Weight: 60g

  • Brand: COMOK
  • ASIN: B07JHYPR3B

Freud 1/4" (Dia.) Single Flute Straight Bit with 1/4" Shank (03-140)

Freud 1/4" (Dia.) Single Flute Straight Bit with

This single flute Freud bit was designed for high production work with maximum chip clearance for fast feed rates. 1/4" Overall Dia (D), 1-1/2" Carbide Height (h), 1/4" Shank, 2-1/2" Overall Length (H) Ideal For: Fast cuts in any wood or composites. Application: General stock removal at fast feed rates. Made In Italy.

  • Color: Perma-SHIELD Coating Red
  • Brand: Freud
  • ASIN: B00004T7AX
  • UPC: 008925382256

CMT 812.629.11, Straight Bit, 1/2-Inch Shank, 1/2-Inch Diameter

CMT 812.629.11, Straight Bit, 1/2-Inch Shank, 1/2-Inch

This straight bit features long cutting length and overall length. It can withstand even the heaviest work load and still give you a smooth, precise cut every time. They also provide exceptional chip ejection to allow cleaner and more constant cutting. To be used on wood, wood composites for multiple applications such as right-angle joints, box joints, mortise and tenons, rabbets, union, tongue and groove joints and even more. After a test performed by Wood Magazine, CMT orange bits have been rated the first overall router bits compared to other brands.

  • Brand: CMT
  • ASIN: B001NI8LMM
  • UPC: 100076966320

Yonico 31210-SC 1 1 CNC Router Bit Up Cut Solid Carbide 1/8-Inch X 1/2-Inch X 1/4-Inch X 2-Inch 1/4-Inch Shank

Yonico 31210-SC 1 1 CNC Router Bit Up

Best used for: Standard milling, dadoing, and boring. • Cutting Diameter: 1/8" • Cutting Height: 1/2" • Shank Diameter: 1/4" • Overall Length: 2" • Flutes: 2 Up-cut end mills direct woodchips up and away from the milling area leaving an unobstructed path for the endmill. Bit breakage is less likely. Up cut end mills are the best choice for most standard milling applications. The up cut direction can leave behind a minimally rough top surface edge.

  • Brand: Yonico
  • ASIN: B00L3AV0ZK
  • UPC: 765573829563

Amana Tool - 45412 Carbide Tipped Straight Plunge High Production 5/16 Dia x 1" 2

Amana Tool - 45412 Carbide Tipped Straight Plunge

Use a Two-Flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution Yield a smooth surface, but feed rate is slightly reduced, #45412, diameter (D): 5/16, cutting height (B): 1, shank (D): 1/2, overall length (L): -3/4, flutes: 2, 45412 carbide Tipped straight plunge high production 5/16 dia x 1 inch x 1/2 shank

  • Brand: Amana Tool
  • ASIN: B000JJY60M
  • UPC: 738685854129

Straight Router Bit 1/4 inch Shank Diameter 1/2" Cutting Diameter Double Flute Carbide Tipped Cutter Plunge Router Bits,1pcs

Straight Router Bit 1/4 inch Shank Diameter 1/2"

Overview Straight bits are most commonly used extensions for a router as they allow you to perform straight cuts. These cuts form grooves or dados. They can also be used for creating a shaft for embedding decorative parts in your newly created wooden part. These decorative inlays can be used to increase the value of your furniture, boxes or any other project made out of wood. Spes Bit Material: Carbide Individual/Set: Individual Number of Pieces: 1 Router/planer type: Straight Shank Diameter: 1/4" Cutting Diameter: 1/2" Cutting Depth: 1" Overall Length: 2-1/2" Flutes: 2 Application 2 flute, carbide tipped router bits. Will plane edges, cut grooves, rabbets, slots, and dadoes. Also used for mortising and carving, as well as other applications where a flat bottom is required. The Carbide Straight Router Bit features a kickback-reducing design that delivers a safe, controlled cut. The unique carbide geometry of the back-relief grind technology improves chip clearance and reduces heat buildup.

  • Brand: JESTUOUS
  • ASIN: B07BF6WP9N
  • UPC: 743447543210

Whiteside Router Bits SC01 Standard Straight Bit with Solid Carbide 1/16-Inch Cutting Diameter and 5/16-Inch Cutting Length

Whiteside Router Bits SC01 Standard Straight Bit with

Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction. Several woodworking magazines have tested Whiteside versus the competition and selected Whiteside as the winner for best router bits available in the market. Whiteside Machine Company was founded in 1970 as a general purpose machine shop in the basement of Bill & Bobbie Whiteside's home. Located in Western North Carolina near the furniture manufacturing town of Hickory, the company was often involved in making repairs or special parts for the furniture and woodworking field. A strong commitment to customer problem-solving, a can-do attitude, and innovative ideas, along with a growing core of dedicated employees, helped the business evolve into a manufacturer of woodworking equipment and tooling. Primarily through repeat business and referrals, the tooling business continued to grow to meet a demand for quality production router bits as well as custom application tooling. Today, Whiteside Machine occupies a 40,000 sq. ft. manufacturing facility and produces a complete line of solid carbide and carbide tipped router bits. Whiteside's quality, innovation, and customer commitment is still pr...

  • Brand: Whiteside Router Bits
  • ASIN: B000K2CBUA
  • UPC: 844278000016

Yonico 14522 5 Bit Straight/Dado Router Bit Set, 1/2-Inch Shank

Yonico 14522 5 Bit Straight/Dado Router Bit Set,

The Yonico 14522 straight router bit set is excellent for all dado and straight cut routing needs. Made from K10 industrial grade carbide, these router bits will ensure that every cut will be perfectly smooth and chip free. The included 1/4" dado router bit is upgraded with a complete solid carbide top and blade as opposed to standard dado router bits which have carbide blades welded on. This vital upgrade prevents otherwise common 1/4" dado bit breakage. Set includes a beautiful solid wood storage case. All bit shanks are 1/2".

  • Brand: Yonico
  • ASIN: B00KZM1UL6
  • UPC: 765573826586

Amana Tool - 43700 Solid Carbide Single Flute Straight Plunge 1/8 Dia x 7/16 x 1/4" Sh

Amana Tool - 43700 Solid Carbide Single Flute

For high volume, high speed cutting in dense Natural woods and abrasive wood composites, use solid carbide Bits. Solid carbide dissipates heat more uniformly, extending tool life. Single flute bits cut faster, with better chip clearance. Two-flute bits cut more slowly, but leave a smooth finish. Maximum RPM 28, 000, #43700, diameter (D): 1/8, cutting Height (B): 7/16, shank, D): 1/4, overall length (L): 2, flutes: 1, 43700 Solid Carbide single flute, straight plunge 1/8 dia x 7/16 x 1/4 inch Shank

  • Brand: Amana Tool
  • ASIN: B001NI4ICO
  • UPC: 738685437001

Freud 1/4" (Dia.) Solid Carbide Up Spiral Bit with 1/4" Shank (75-102)

Freud 1/4" (Dia.) Solid Carbide Up Spiral Bit

  • Brand: Freud
  • ASIN: B00004T7JZ
  • UPC: 881599015572

Zzanggu 1/2 Inch Shank Double Flute Straight Router Bit with 2 Inch Length Carbide Cutter, 1/2 Inch Diameter

Zzanggu 1/2 Inch Shank Double Flute Straight Router

Zzanggu Double Flute Straight Router Bit, 1/2 Inch Shank x 1/2 Inch Dia x 2 Inch Cutter 【Industrial Quality Router Bits】 C3 Micro-grain Tungsten Carbide Cutters Solid hardened steel bodies 【Size】 Shank Diameter: 1/2-inch; Cutting Diameter: 1/2-inch; Flute Length: 2-inch; Overall Length: 95mm / 3-3/4-inch; 【Features】 C3 Micro-grain Tungsten Carbide Cutters Build-up & Heat Resistant Teflon Coating Anti-Kickback Design 【Versatility】 Cuts all composite materials, plywood, hardwoods, softwoods. Such bits are characterized with high hardness and long life and resulting in nice finishing on woody pieces after cutting 【Package Include】 Double Flute Straight Router Bit x1 Plastic Case x1

  • Color: Yellow
  • Brand: Zzanggu
  • ASIN: B07BT2MQ5C

HQMaster CNC Router Bits 1/8 Router Bit 1 8 End Mill Flat Nose Carbide Endmill 2-Flute Spiral Upcut Milling Cutter Tool Set 17mm CEL, 38.5mm OAL for Wood Nylon Resin ABS Acrylic PVC MDF Hardwood 10Pcs

HQMaster CNC Router Bits 1/8 Router Bit 1

This product is protected by a registered trademark according to US Trademark Law. HQMaster 10PCS 1/8" 17mm Carbide Flat Nose End Mill CNC Router Bits Double Flute Upcut Spiral Set Tool Nylon Resin ABS Acrylic PVC MDF Hardwood Specifications: Shank diameter(SD): 3.175mm(1/8") approx. Cutting edge diameter (CED): 3.175mm(1/8") approx. Cutting edge length (CEL): 17mm(0.67in) approx. Overall length: 38.5mm(1.52in) Number of flutes: 2 Made with solid carbide Suitable material: Nylon, Resin, ABS, Acrylic, PVC, MDF, Hardwood and other three-dimensional sculpture, surface machining, etc. Ideal for 3D relief sculpturing, cutting, engraving, slotting, milling, etc. Package contents: 1 set (10PCS) 1/8" Carbide CNC Router Bits Double Flute Tools 1 x Plastic Case

  • Color: Silver
  • Brand: HQMaster
  • ASIN: B010NI39WO
  • UPC: 723434395534

uxcell 1/2-inch Dia by 3-inch Depth Double Flute Extra Long Straight Router Bit with 1/2-inch Shank

uxcell 1/2-inch Dia by 3-inch Depth Double Flute

Description:1. Industrial Quality Router Bit; Kickback reducing design; Individually computer balanced.2. Carbide tipped double flute straight bits are designed to give excellent smoothness of cut and balanced cutting with minimal vibration.3. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.4. Cuts all composite materials, plywoods, hardwoods, softwoods, glass fiber and plastic, Especially for chipboard(melamine board), glass fiber reinforced plastics(carbon fiber material), MDF, etc.5. Such bits are characterized with high hardness and long life and resulting in nice finishing on woody pieces after cutting; Compared with the similar products, ours are more than 2 times of normal ones in life after strict testing. Specifications:Product Name: Straight Router Bit; Material: Steel, Carbide;Flute Number: 2; Standard: 1/2-inch x 1/2-inch; Shank Diameter: 1/2-inch; Cutting Diameter: 1/2-inch; Flute Length: 3-inch;Overall Length: 120mm / 4.7-inch; Color: Silver Tone, Blue; Weight: 89g; Package Content: 1 x Straight Router Bit, 1 x Plastic Case;

  • Brand: uxcell
  • ASIN: B01MRNYWM1
  • UPC: 709874561265

Straight Router Bit JESTUOUS 1/2 Inch Cutting Diameter x 1/2 Shank Diameter x 3 Cutting Depth Carbide Tipped Double Flute Plunge Bits,1 pcs

Straight Router Bit JESTUOUS 1/2 Inch Cutting Diameter

SpesItem:Straight router bitBit Material: Carbide tippedIndividual/Set: IndividualNumber of Pieces: 1Router/planer type: StraightShank Diameter: 1/2"Cutting Diameter: 1/2"Cutting Depth: 3"Overall Length: 4-1/2"Flutes: 2Application2 flute, carbide tipped router bits. Will plane edges, cut grooves, rabbets, slots, and dadoes. Also used for mortising and carving, as well as other applications where a flat bottom is required.The Carbide Straight Router Bit features a kickback-reducing design that delivers a safe, controlled cut. The unique carbide geometry of the back-relief grind technology improves chip clearance and reduces heat buildup.

  • Brand: JESTUOUS
  • ASIN: B07SM5MGGG
  • UPC: 603977806653

Straight Router Bit JESTUOUS 5/16 Inch Cutting Diameter x 1/4 Shank Diameter x 1 Cutting Depth Carbide Tipped Double Flute Plunge Bits,1 pcs

Straight Router Bit JESTUOUS 5/16 Inch Cutting Diameter

Overview Straight bits are most commonly used extensions for a router as they allow you to perform straight cuts. These cuts form grooves or dados. They can also be used for creating a shaft for embedding decorative parts in your newly created wooden part. These decorative inlays can be used to increase the value of your furniture, boxes or any other project made out of wood. Spes Bit Material: Carbide Individual/Set: Individual Number of Pieces: 1 Router/planer type: Straight Shank Diameter: 1/4" Cutting Diameter: 5/16" Cutting Depth: 1" Overall Length: 2-1/2" Flutes: 2 Application 2 flute, carbide tipped router bits. Will plane edges, cut grooves, rabbets, slots, and dadoes. Also used for mortising and carving, as well as other applications where a flat bottom is required. The Carbide Straight Router Bit features a kickback-reducing design that delivers a safe, controlled cut. The unique carbide geometry of the back-relief grind technology improves chip clearance and reduces heat buildup.

  • Brand: JESTUOUS
  • ASIN: B07H776G7K
  • UPC: 603977806356

Bosch 85154 High Speed Steel Single Flute Straight Bit, 1/4-Inch

Bosch 85154 High Speed Steel Single Flute Straight

BOSCH STRAIGHT BIT 1/4", 1/4" XL SHK., 1 FLT., (85154)

  • Brand: Bosch
  • ASIN: B000ABAS5Q
  • UPC: 000346048889

Bosch 85224MC 5/16 In. x 1 In. Carbide-Tipped Double-Flute Straight Router Bit

Bosch 85224MC 5/16 In. x 1 In. Carbide-Tipped

Bosch Industrial Router Bits use micrograin carbide and a special heat-treated process to provide precision and durability. This accuracy is achieved across hundreds of profiles for mortising, spiral cuts and edging wood, plus special cuts in plastic and laminate. Includes: 5/16-Inch x 1-Inch Carbide-Tipped Double Flute Straight Router Bit.

  • Brand: Bosch
  • ASIN: B000GY9T0C
  • UPC: 000346351613

SPTA 10Pcs HSS Router Carbide Engraving Bits & 5Pcs Drill Bit-1/8"(3mm) Shank For Rotary Tools for DIY Woodworking, Carving, Engraving, Drilling

SPTA 10Pcs HSS Router Carbide Engraving Bits &

Tungsten Carbide Rotary Burr SET

  • Color: 10Pcs HSS Router Carbide Bits
  • Brand: SPTA
  • ASIN: B013P10AZ0
  • UPC: 702382463441

Freud 1/2" (Dia.) Top Bearing Flush Trim Bit with 1/4" Shank (50-102)

Freud 1/2" (Dia.) Top Bearing Flush Trim Bit

The top mounted bearings on these bits make them ideal for lettering and other template work where the work piece is being grooved or routed out.

  • Color: Perma-SHIELD Coating Red
  • Brand: Freud
  • ASIN: B0000225XQ
  • UPC: 100058665333

FOOS - Engraving CNC Wood Carving Router Bit Set - 4pcs - Solid Carbide - 1/4" Shanks - USA Veteran Owned

FOOS - Engraving CNC Wood Carving Router Bit

The Foos wood carving set is 4 pieces total, solid carbide, 1/4" shank router bits. A 20° profile bit for etching and outlining. A 15° carving liner for fine details. Also, 60°

  • Brand: Foos
  • ASIN: B079LX5GDD
  • UPC: 667486927803
Similar Flute Straight Plunge Router Bit Shopping Results