Glider Bracket Hardware

Glider Bracket

This unique hardware lets you turn virtually any bench into a glider! Measures 7-1/2" between centers with 1-1/4" offset. With rust-resistant plating and ball bearing pivot points. Mounts with common 1/4" dia. bolts (not included). Set of four.Technical Details:Offset project legs and sub-base 1-1/4" on each side. Mounting holes should be vertically aligned 7-1/2" apart on opposing surfaces (between the project sub-base and project legs).Rust-resistant plating and ball bearing pivot points. Mounts with common 1/4" dia. bolts (not included).Set of four.Made in the USA.

  • Brand: Rockler
  • ASIN: B001DSZX46

Project Patio Glider Bracket Rocker Arm Hardware - 7.5" - 4 Pack - Made in The USA

Project Patio Glider Bracket Rocker Arm Hardware -

Replace your worn out bracket hardware on your indoor or outdoor patio furniture glider, love seat or chair. Heavy duty and long lasting replacement part will bring the glide back to your patio furniture.

  • Brand: Project Patio
  • ASIN: B07HYG7BCS

Glider Rocker Bearings, Set of 8

Glider Rocker Bearings, Set of

This bearing fits on many type of glider rocker chairs. The diameter is 1-1/8''. The hole is for a 3/8'' bolt and is threaded. Check before ordering if it is the right model for your chair. Price is for the full set of (8) bearings.

  • Color: Naturel
  • ASIN: B00T0QPRT4
  • UPC: 755263892014

Platte River 124094,"Hardware, Furniture, Miscellaneous", Glider/Rocker Bearing Assembly Only

Platte River 124094,"Hardware, Furniture, Miscellaneous", Glider/Rocker Bearing Assembly

Simple to install on restorations or new construction. You can restore an old rocker or build a virtually maintenance free base for your new chair or ottoman with Platte River™ glider/rocker hardware: Individual ball bearing assemblies are precision ground and pre-lubricated for long life. Each assembly consists of a 1-1/8" diameter flanged bearing with a 1-7/16" long x 3/8-16 threaded shaft. Two flat washers, three mounting screws and a jamb nut are also included. Thin profile allows mounting in 3/4" stock. Bearings are sold each. Construction of a glider rocker base requires 8 bearings. Assemblies mounted in Red Oak frames held static loads up to 700 pounds.

  • Color: Natural
  • Brand: Platte River
  • ASIN: B008PEOSWO
  • UPC: 847667037464

Glider Bracket Arm 9"- 7 1/2" Value Pack of 4 - Made in USA - Patio Furniture Glider Rocker Hardware Repair Kit

Glider Bracket Arm 9"- 7 1/2" Value Pack

When a love seat or glider chair does not glide smoothly, it needs new glider bearing arms. Overall length of this glider bearing arm is 9"; 7 1/2" from hole to hole. Hole size is 1/4", and offset is approximately 7/8". US standard size, not metric. Unpainted, but silver in color and can be painted. Click on additional part views to help confirm if this is the item you need.

  • Color: Silver
  • Brand: Bravo Brands
  • ASIN: B07DPRZ57P
  • UPC: 748926942072

Stem Rocker Bearing Assembly 3/8" X 1", Bearing 7/8" OD, with mounting hardware Rocker Bearing, Set of 4

Stem Rocker Bearing Assembly 3/8" X 1", Bearing

Stem bearings are perfect for rockers and gliders. Simple installation on new or restoration chair. The rocker bearings come in two sizes, this listing is for the OD 7/8", we also have a larger on that is 1-1/8"OD. The rocker bearings are sold with and without mounting hardware. This listing is for the 7/8" OD bearing with hardware. See our other listings for without hardware. Theses bearings are made for Shed Windows and More to our specifications, other sellers using our name will not be the same quality and standards as ours. Shed Windows and More, Inc. , carries the largest selection of shed windows, shed hardware, shutters, skylights, vents, flower boxes, etc for all kinds of outdoor buildings, such as, sheds, playhouses, animal shelters and more. We also have a line of PVC double pane windows for tiny houses, bathrooms or any building were a small insulated window is needed. If you , do not see the item you need, please ask! Shed Windows and More might have it in stock, or have the ability to order it for you. Shed Windows and More your number 1 place for shed supplies and small windows.

  • Brand: Shed Windows and More
  • ASIN: B01KU3CYQO
  • UPC: 602464966214

XiKe Stem Rocker Assembly Bearing 1-1/8" OD, Glider and Rocker Hardware, Furniture and Miscellaneous, with Mounting Hardware Bearing, Replace 124094. (2)

XiKe Stem Rocker Assembly Bearing 1-1/8" OD, Glider

  • Brand: XiKe
  • ASIN: B07PYV317Y
  • UPC: 713072779636

Glider Rocker Bearings, Set of 8

Glider Rocker Bearings, Set of

The diameter is 1-1/8''. The stud is 3/8''. Check before ordering if it is the right model for your chair. Price is for the full set of (8) bearings.

  • Color: Naturel
  • ASIN: B00SX9PJXI
  • UPC: 755263892007

Glider Bracket Hardware 4-Piece

Glider Bracket Hardware

Glider Bracket Hardware comes in a set of four (4) glider brackets that fit on most gliders and can be used to replace old worn or broken brackets. Our glider brackets have special sealed bearings to eliminate squeaking. Hardware measures 7-1/2" between centers with 1-1/4" offset. The brackets mount with common 1/4"-diameter bolt.

  • Brand: WOODRIVER
  • ASIN: B005SC68KQ
  • UPC: 844788012400

Barn-Shed-Play S/4 Stainless Steel Glider Bearing Arm Brackets - 7 1/2" from Hole to Hole

Barn-Shed-Play S/4 Stainless Steel Glider Bearing Arm Brackets

  • Brand: Barn-Shed-Play
  • ASIN: B01BI1TS48
  • UPC: 641489958903

Woodtek 162491,"Hardware, Furniture, Miscellaneous", Glider Rocker Bearing Arm Assembly, 4-Pack

Woodtek 162491,"Hardware, Furniture, Miscellaneous", Glider Rocker Bearing Arm

Easily repair an existing glider or build a new one. Steel arms with ball bearings in each end make glider rocker assembly a simple task: Steel brackets have ball bearings spaced 7-1/2" apart on center. Bearings are offset 2" to allow clearance between stationary base and moving components. Arms must be mounted parallel to each other to allow proper movement. Galvanized coating helps prevent corrosion. Use 1/4" diameter bolts and nuts and washers (not included) to mount arms to wooden components. Sold in sets of four arms- enough to complete one glider. Taiwan.

  • Brand: Woodtek
  • ASIN: B0087EHHT8
  • UPC: 847667095686

Cowmole Co. Furniture Connecting Fitting Screw kit Rocking Chair Accessories Rocker Bearing Connecting Fittings KF288

Cowmole Co. Furniture Connecting Fitting Screw kit Rocking

startUS $10.94US $7.92US $9.99US $81.52US $84.60US $90.75US $153.83US $165.29US $172.98US $188.46endWelcome to our storeIf you purchase2lot or more once time,you will get3%discount;The more you purchase,the more discount you will winO(∩_∩)O~Furniture connecting fitting screw kit rocking chair accessories rocker bearing connecting fittings KF288Tips:This listing is for 1Set Price.1Set=1PCS Nut + 1PCS Bolt + 2PCS ShimSize:M8*55Below Picture is for 1Set Shows:Details View:

  • Brand: Cowmole Co.
  • ASIN: B07M6YVHTN

Glider Rocker Hardware Kit

Glider Rocker Hardware

This hardware kit is what you need to build one rocker. You will need to drill a 1-1/8" hole for the bearings to push into. We highly recommend using nothing but hardwoods. The bolts, nuts and washers are 3/8". The screws are #6 square recess drive. This produces the same simple arrangement as used by the chair manufacturers.About the bearings: These bearings are made by the same American manufacturer that has been making bearings for glider rockers since the rockers were invented. They are a low speed bearing made of steel construction throughout. They have a light zinc finish and are lightly greased internally when assembled. The metal shield prevents dusts and contaminants from easily entering the bearing. The bore is smooth and fits a standard 3/8" bolt perfectly. This allows you to use any length bolt you need to build or repair your rocker. Includes 8 bearings with bolts and screws.

  • Brand: WOODCRAFT
  • ASIN: B01B4ZYRIU
  • UPC: 885732160501

Woodtek 162491, 20-Pack,"Hardware, Furniture, Miscellaneous", Glider Rocker Bearing Arm Assembly

Woodtek 162491, 20-Pack,"Hardware, Furniture, Miscellaneous", Glider Rocker Bearing

Easily repair an existing glider or build a new one. Steel arms with ball bearings in each end make glider rocker assembly a simple task: Steel brackets have ball bearings spaced 7-1/2" apart on center. Bearings are offset 2" to allow clearance between stationary base and moving components. Arms must be mounted parallel to each other to allow proper movement. Galvanized coating helps prevent corrosion. Use 1/4" diameter bolts and nuts and washers (not included) to mount arms to wooden components. Sold in sets of four arms- enough to complete one glider. Taiwan.

  • Brand: Woodtek
  • ASIN: B0087EHHX4
  • UPC: 847667095686

Stem Rocker Bearing 3/8" X 1", Bearing 7/8" OD, Rocker Bearing, Set of 4

Stem Rocker Bearing 3/8" X 1", Bearing 7/8"

Stem bearings are perfect for rockers and gliders. Simple installation on new or restoration chair. The rocker bearings come in two sizes, this listing is for the OD 7/8", we also have a larger on that is 1-1/8"OD. The rocker bearings are sold with and without mounting hardware. This listing is for the 7/8" OD bearing only no hardware. See our other listing for a complete assembly

  • ASIN: B00EPNZIJG
  • UPC: 700371466909

Patio Adjustment Brackets for Chaise Lounge,Glider Bracket Hardware (Small Silver Zinc Plating 4 Pack)

Patio Adjustment Brackets for Chaise Lounge,Glider Bracket Hardware

Features:This unique hardware lets you turn virtually any bench into a glider! When a love seat or glider chair does not glide smoothly, it needs new glider bearing arms.Glider Bearing Arm 4 Pack -replacements made of heavy duty steel with zinc coating to help prevent rust. These may still be spray painted over to match your furniture.Hardware is not included. Re-use your old hardware or we suggest using stainless steel bolts with locking nuts.

  • Color: Small Silver Zinc Plating 4 pack
  • Brand: HTTH
  • ASIN: B07MSJ7669

Glider Rocker Bearings, Set of 8

Glider Rocker Bearings, Set of

This bearing fits on many type of glider rocker chairs. The diameter is 7/8''. The hole is for a 5/16'' bolt and is filleted. Check before ordering if it is the right model for your chair. Price is for the full set of (8) bearings.

  • Color: gold and naturel
  • ASIN: B00T0RWMX2
  • UPC: 755263892052

Platte River 124094, 8-Pack,"Hardware, Furniture, Miscellaneous", Glider/Rocker Bearing Assembly Only

Platte River 124094, 8-Pack,"Hardware, Furniture, Miscellaneous", Glider/Rocker Bearing

Simple to install on restorations or new construction. You can restore an old rocker or build a virtually maintenance free base for your new chair or ottoman with Platte River™ glider/rocker hardware: Individual ball bearing assemblies are precision ground and pre-lubricated for long life. Each assembly consists of a 1-1/8" diameter flanged bearing with a 1-7/16" long x 3/8-16 threaded shaft. Two flat washers, three mounting screws and a jamb nut are also included. Thin profile allows mounting in 3/4" stock. Bearings are sold each. Construction of a glider rocker base requires 8 bearings. Assemblies mounted in Red Oak frames held static loads up to 700 pounds.

  • Brand: Platte River
  • ASIN: B00U8RBQQC
  • UPC: 847667037464

Barn-Shed-Play S/4 Glider Bearing Arm Brackets - 6 1/2" from Hole to Hole

Barn-Shed-Play S/4 Glider Bearing Arm Brackets - 6

  • Brand: Barn-Shed-Play
  • ASIN: B07CN9HF3K
  • UPC: 652118566963
Similar Glider Rocker Hardware Shopping Results