Graphtec PLUS CE6000-60 24 Inch Professional Vinyl Cutter with Bonus $2100 in Software, Oracal 651, and 2 Year Warranty

Graphtec PLUS CE6000-60 24 Inch Professional Vinyl Cutter

This bundle is only available from Swing Design. Each CE6000 comes standard with: floor stands, rear media roll rack with new media brake, Graphtec Studio software, Cutting Master Plug-in, plus Graphtec's ARMS (Automatic Registration Mark Sensor) system. Professional, reliable servo motors are made for production and accuracy! Contour Cutting with Auto Registration Mark Sensor System Cutting vinyls and contour cutting pre-printed graphics, artwork and media-from large format (up to 48″ with the CE6000-120) solvent based printers, plus water-based inkjet printers and desktop inkjets and laser printers matched up with the CE6000-40 15″ cutter-are what Graphtec cutting plotters are reliably famous for. The new ARMS allows users to increase production efficiency by reducing media waste by expanding the print and cut area. Cutting heat transfer vinyl media and rhinestone design template graphics is a breeze. Cost/Performance Advantage! On the job, the CE6000 series offers real cost/performance advantages over other brands of cutting plotters: rear media roller brake (24″ and 48″), faster cutting speeds and higher cutting force, you'll have the flexibility to handle a wider range of material. The USB 2.0 full speed data interface or RS232C Serial Port ensures a reliable connect...

  • Brand: Graphtec
  • ASIN: B076PQ35Q1
  • UPC: 665788933201

AFUNTA Compatible CB09 CB09U Graphtec Blade Holder Base with 30 pcs (30/45/ 60 Degree) Vinyl Cutter Plotter Cutting Blades Silhouette Cameo

AFUNTA Compatible CB09 CB09U Graphtec Blade Holder Base

Specification: Material: Tungsten Cemented Carbide Length of blade: 12mm Length of holder: 51.8mm Degree of Blade: 30 / 45 / 60 degree Package Includes: 1 x Blade holder 10 x 30 Degree Cutter Blade (Yellow) 10 x 45 Degree Cutter Blade (Red) 10 x 60 Degree Cutter Blade (Blue) Tips: 1. Blade should not extend too long, generally within half a millimeter is better, while paying attention to extended blade longer properly when carve the small print, in order to avoid the blade holder take the carved strokes away. Suitably engraved small print with new cutter and slow down. 2. When the word carved with angular phenomenon, you should change the blade to eliminate the problem, if the phenomenon persists after change blade, it should be the holder problem. 3. When problem arise the blade holder, try a drop of oil in the bearing and rotate the blade several times to lubricate, if still unresolved, consider replacing the blade holder.

  • Brand: AFUNTA
  • ASIN: B07G97TL5Z

Graphtec Plus 15 Inch Desktop Vinyl Cutter & Plotter Oracal Bundle with $2100 in Software and 2 Year Warranty

Graphtec Plus 15 Inch Desktop Vinyl Cutter &

The CE6000 are Graphtec's professional class of cutter plotter series, and updates the extremely successful CE5000 series with improved features. Up to 300 grams of down force. Made by the owners of Silhouette Cameo

  • Brand: Swing Design
  • ASIN: B06Y47HL4S
  • UPC: 665788902450

MH Series USCutter 34-inch Vinyl Cutter Plotter with Stand and VinylMaster - New Design and Cut Software

MH Series USCutter 34-inch Vinyl Cutter Plotter with

Note: This cutter does not work with Mac/Apple computers.The USCutter MH-Series are the best value vinyl cutters available anywhere! Works with VinylMaster Cut and other popular software (like Sure Cuts A Lot Pro, Flexi, SignBlaser and SignCut Productivity Pro) through standard Roland PNC1000 drivers.- 34-inch Vinyl Cutter/ Plotter- FREE Floor Stand- Three connectivity options: Parallel, Serial, and USB- USB connection is accomplished through serial conversion- 3 x 45 deg. blades included- Pen adapter (use to plot instead of cut)- Cover- 2 pinch rollers- 1 year warranty on the cutter- Free lifetime phone support - even after out of warrantyFeatures:- Dual position carriage (front position for cut-through, rear position for standard vinyl).- Roland compatible blade holder gives you access to the most economical blades available.- Two fully adjustable pinch-rollers allow you to use a flexible range of materials.- Superior ball-bearing dual roller media roller system allows you to place material on top of rollers rather than putting roller through material each time. (Huge time savings!)Included software VinylMaster Cut (Design and Cut):VinylMaster Cut (Basic Edition) is dedicated vinyl cutting software designed specifically for making vinyl signage. VinylMaster Cut allows you to pr...

  • Brand: MH Series
  • ASIN: B01AM8M7ZU
  • UPC: 892145002847

Yakamoz CB09 CB09U Graphtec Blade Holder Base with 15pcs Graphtec Blade Vinyl Cutter Plotter Cutting Blades 30/45/ 60 Degree

Yakamoz CB09 CB09U Graphtec Blade Holder Base with

Yakamoz CB09 Graphtec Blade Holder with 15pcs 30 45 60 Degree Cutting BladesSpecification: Material: hard alloy Length of holder: 51.8mm Length of blade: 12mm Degree of Blade: 30 ° / 45 ° / 60 °  Features: Tool consistency. Materials with ultra - hardness, carbide, super - toughness, longer wear and edge grinding with ultrafine polishing, edge more. Suitable for polishing wood, pvc mahogany color, precision, MDF and other relief. Usage: 1.  Blade should not extend too long, generally within half a millimeter is better, while paying attention to extended balde longer properly when carve the small print, in order to avoid the blade holder take the carved strokes away. Suitably engraved small print with new cutter and slow down. 2. When the word carved with angular phenomenon,you should change the blade to eliminate the problem,if the phenomenon persists after change blade, it should be the holder problem. 3. When problem arise the blade holder,try a drop of oil in the bearing and rotate the blade several times to lubricate, if still unresolved, consider replacing the blade holder.  Package Included: 1 x  Blade holder 5 x 30° Cutter Blade 5 x 45° Cutter Blade 5 x 60° Cutter Blade

  • Brand: Yakamoz
  • ASIN: B06XRZYFVM
  • UPC: 602701910536

KEKAI CB09 CB09U Graphtec Blade Holder Base with 15pcs (30/45/ 60 Degree) Graphtec Blade Vinyl Cutter Plotter Cutting Blades Silhouette Cameo

KEKAI CB09 CB09U Graphtec Blade Holder Base with

Specification: Material: hard alloy Length of blade: 12mm Length of holder: 51.8mm Degree of Blade: 30 ° / 45 ° / 60 ° Usage: Suitable for polishing wood, pvc mahogany color, precision, MDF and other relief. 30° blades are predominantly used for cuting very thin window tint and mylar materials. 45° blades are the standard blade that comes with most vinyl cutters. They are recommended for all standard cast and calandered vinyls as well as other thin materials such as ThermoFlex Plus. 60° blades are recommended for thicker materials such as reflective films, flock and twill materials and also sand-blast resist. Package Included: 1 x Blade holder 5 x 30° Cutter Blade 5 x 45° Cutter Blade 5 x 60° Cutter Blade

  • Brand: KEKAI
  • ASIN: B073ZCVW68
  • UPC: 712324974324

Graphtec Plus CE6000-120 48 Inch Professional Vinyl Cutter with Bonus $700 in Software, Oracal 651, and 2 Year Warranty

Graphtec Plus CE6000-120 48 Inch Professional Vinyl Cutter

Each CE6000 comes standard with: floor stands, rear media roll rack with new media brake, Graphtec Studio software, Cutting Master Plug-in, plus Graphtec's ARMS (Automatic Registration Mark Sensor) system. Professional, reliable servo motors are made for production and accuracy! Contour Cutting with Auto Registration Mark Sensor System Cutting vinyls and contour cutting pre-printed graphics, artwork and media-from large format (up to 48″ with the CE6000-120) solvent based printers, plus water-based inkjet printers and desktop inkjets and laser printers matched up with the CE6000-40 15″ cutter-are what Graphtec cutting plotters are reliably famous for. The new ARMS allows users to increase production efficiency by reducing media waste by expanding the print and cut area. Cutting heat transfer vinyl media and rhinestone design template graphics is a breeze. Cost/Performance Advantage! On the job, the CE6000 series offers real cost/performance advantages over other brands of cutting plotters: rear media roller brake (24″ and 48″), faster cutting speeds and higher cutting force, you'll have the flexibility to handle a wider range of material. The USB 2.0 full speed data interface or RS232C Serial Port ensures a reliable connection to the computer, either on a Mac or Windows P...

  • Brand: Graphtec
  • ASIN: B076PQXK4H
  • UPC: 665788933218

Lifetool CB09 CB09U Graphtec Blade Holder Base with 15pcs (30/45/ 60 Degree) Graphtec Blade Vinyl Cutter Plotter Cutting Blades for Silhouette Cameo, 1 roll Plotter Cutter Strip

Lifetool CB09 CB09U Graphtec Blade Holder Base with

Specifications:Material: Aluminum Alloy Blade Holder and Carbide BladesLength of Blades Holder: 51.8 mm(2.04 inches)Length of Blades: 19 mm(0.78 inch)Diameter of Blades: 0.9mmDegree of Blade: 30 ° / 45 ° / 60 °Type: Lettering, CuttingDIY Supplies: Polishing Wood, PVC, Mahogany Color, Precision, MDF and other Relief. Compatible with: Graphtec CB09U CB09Package Weight: 63g / 2.22oz Usage:30° Blades (Blue cap) are mainly used for cuting very thin window tint and mylar materials.45° Blades (Red cap) are the standard blades that work for most vinyl cutters. They are recommended for all standards cast and calandered vinyls as well as other thin materials such as ThermoFlex Plus. 60° Blades (Yellow cap) for Cutting very small font & intricate line-art logos. Such as reflective films, flock and twill materials and also sand-blast resist.Plotter Blade Cutting Strip Specification: Color: white Size: 150x0.8cm Suitable for:Suitable for all 8 mm head cutting plotter Plotter layering LIYU 8mm tape layering pads blades do not hurt headNotice:1. Blade should not extend too long, generally within half a millimeter is better. To avoid the blade holder take the carved strokes away, please pay enough attention to extend blade longer properly when carve the small print. Slow down suitably if y...

  • Color: Graphtec CB09U
  • Brand: Lifetool
  • ASIN: B07L878THN
  • UPC: 791259578289

Graphtec Plus CE6000-60 24 Inch Professional Vinyl Cutter with Bonus $2100 in Software, Oracal 751, and 2 Year Warranty

Graphtec Plus CE6000-60 24 Inch Professional Vinyl Cutter

This bundle is only available from Swing Design. Each CE6000 comes standard with: floor stands, rear media roll rack with new media brake, Graphtec Studio software, Cutting Master Plug-in, plus Graphtec's ARMS (Automatic Registration Mark Sensor) system. Professional, reliable servo motors are made for production and accuracy! Contour Cutting with Auto Registration Mark Sensor System Cutting vinyls and contour cutting pre-printed graphics, artwork and media-from large format (up to 48″ with the CE6000-120) solvent based printers, plus water-based inkjet printers and desktop inkjets and laser printers matched up with the CE6000-40 15″ cutter-are what Graphtec cutting plotters are reliably famous for. The new ARMS allows users to increase production efficiency by reducing media waste by expanding the print and cut area. Cutting heat transfer vinyl media and rhinestone design template graphics is a breeze. Cost/Performance Advantage! On the job, the CE6000 series offers real cost/performance advantages over other brands of cutting plotters: rear media roller brake (24″ and 48″), faster cutting speeds and higher cutting force, you'll have the flexibility to handle a wider range of material. The USB 2.0 full speed data interface or RS232C Serial Port ensures a reliable connect...

  • Brand: Graphtec
  • ASIN: B07KPN3BQX
  • UPC: 665788957818

24" Graphtec CE6000-60 Plus High Performance Vinyl Cutting Plotter

24" Graphtec CE6000-60 Plus High Performance Vinyl Cutting

Product Highlights: Fast & Accurate Digital Servo Motor 4 Point, Dual-Axis Skew Correction Tangential Control enhanced precision Graphtec Studio Software Cutting Master 3 - Adobe Illustrator, CorelDraw plug-in ARMS (5th Gen. Auto Registration Mark Sensor) for contour cutting pre-printed designs Max cutting force up to 300grams Interface - USB 2.0 / Seral RS-232C / Graphic LCD Screen, Large, easy to read backlit LCD display Rear media roller brake / Mac and Windows compatibleTo be used for cut on: Card stock Paint maskHeat transferLaminateSandblast maskLow intensity reflectiveSpecifications for the Graphtec CE6000-40 Plus vinyl cutter: Maximum cutting area: 23.7" wide x 164' length Compatible media width range: 2" to 28" (50mm to 712mm)Maximum Media Thickness: 10 mils (0.25mm) Maximum vinyl cutting speed: 35" (900mm) per second (at 45-degree direction)Vinyl cutter downforce range: 20 gf to 300 gf in 31 steps (max 300 gf)Compatible with many types of media including but not limited to: heat transfer vinyl, vinyl films, rhinestone template materials, paint mask film, etc.Dimensions: 35.4" x 23.3" x41.2" (900mm x 593mm x 1046mm)Shipping weight: 30kg (66 pounds) with standApplication: CE6000 Cutting Applications Include (but not limited to) cut vinyl Cut Pre-Printed Labels Cut Hea...

  • Color: Grey
  • Brand: Unknown
  • ASIN: B00C5TNODY
  • UPC: 644766576128

CB09 CB09U Graphtec Cutting Blade Holder with 15pcs top quality Vinyl Cutter Plotter Cutting Blades For Silhouette 30/45/ 60 Degree (Each degree 5pcs)

CB09 CB09U Graphtec Cutting Blade Holder with 15pcs

Specifications: Material: hard alloy Diameter(Outer): approx.11.5mm/0.45" Diameter(Inner ): approx.1.5mm/0.059" Length(Clamp to down): approx.33mm/1.29" Length of holder: 51.8mm Package Include: 1*Blade holder 5*30 Degree Blades 5*45 Degree Blades 5*60 Degree Blades Suitable for: Plotter cutter. Notice: Blade should not extend too long,generally within half a millimeter is better, while paying attention to extended balde longer properly when carve the small print, in order to avoid the blade holder take the carved strokes away. Suitably engraved small print with new cutter and slow down. When the word carved with angular phenomenon,you should change the blade to eliminate the problem,if the phenomenon persists after change blade, it should be the holder problem. When problem arise the blade holder,try a drop of oil in the bearing and rotate the blade several times to lubricate, if still unresolved, consider replacing the blade holder.

  • Brand: Qi Mei
  • ASIN: B07145C32R
  • UPC: 712179551459

Graphtec Plus CE6000-60 24 Inch Professional Vinyl Cutter with Bonus $700 in Software, Siser Easyweed HTV, and 2 Year Warranty

Graphtec Plus CE6000-60 24 Inch Professional Vinyl Cutter

This bundle is only available from Swing Design. Each CE6000 comes standard with: floor stands, rear media roll rack with new media brake, Graphtec Studio software, Cutting Master Plug-in, plus Graphtec's ARMS (Automatic Registration Mark Sensor) system. Professional, reliable servo motors are made for production and accuracy! Contour Cutting with Auto Registration Mark Sensor System Cutting vinyls and contour cutting pre-printed graphics, artwork and media-from large format (up to 48″ with the CE6000-120) solvent based printers, plus water-based inkjet printers and desktop inkjets and laser printers matched up with the CE6000-40 15″ cutter-are what Graphtec cutting plotters are reliably famous for. The new ARMS allows users to increase production efficiency by reducing media waste by expanding the print and cut area. Cutting heat transfer vinyl media and rhinestone design template graphics is a breeze. Cost/Performance Advantage! On the job, the CE6000 series offers real cost/performance advantages over other brands of cutting plotters: rear media roller brake (24″ and 48″), faster cutting speeds and higher cutting force, you'll have the flexibility to handle a wider range of material. The USB 2.0 full speed data interface or RS232C Serial Port ensures a reliable connect...

  • Brand: Graphtec
  • ASIN: B07RWW3DQR
  • UPC: 665788963680

Graphtec CE6000-ASC -15 Inch Desktop Vinyl Cutter & Plotter with Automatic Sheet Feeder

Graphtec CE6000-ASC -15 Inch Desktop Vinyl Cutter &

15 Inch High Quality Industrial Grade Cutting Machine With Automatic Sheet Feeder CB09UB Blade Holder Graphtec PRO Studio Software - 3 license keys a $2,100 value CB09UB Blade - .9mm Diameter - 45 Degree Continuous hands free sheet media loading and processing Dedicated software ensures accurate alignment Includes Graphtec ARMS (Advanced Registration Mark Sensor) 450 grams of cutting force - strongest in the market Pen Adapter - works well with Staedtler Lumocolor Pens Staedtler Lumocolor Pen - Black Roll Feeder Loupe 11.5 Inch x 16.5 Cutting Mat Vinyl Trimmer USB Connector Cutting Master 4 User Guide CD Supported OS - Widows 10, 8.1, 8.7 CE6000 Machine Training Video Set Up Manual Cutting Blade Manual 2 Year Warranty

  • Brand: Graphtec
  • ASIN: B07CNSFR4Z
  • UPC: 665788933249

Vinyl Cutter USCutter MH 34in Bundle - Sign Making Kit w/Design & Cut Software, Supplies, Tools

Vinyl Cutter USCutter MH 34in Bundle - Sign

SAVE BIG! with this amazing value kit that includes the following items: ~ 1 x MH871 34in cutter w/stand, ~ Vinylmaster Cut - Design & Cut Software, ~ 3 Roland compatible blades, ~ 5 x rolls Greenstar vinyl, each 24" x 5 ft. Colors: Black, White, Real Red, Green, Canary Yellow (NOTE: In very rare circumstances some of the colors stated here may be substituted with different colors without further notice in order to ship your full order on time.), ~ 2 x sheets 12" x 24" magnetic blanks, ~ 2 x 30 ft transfer tape 6" rolls (clear and classic or both can be the same.), ~ 1 x Hoby knife, ~ 1 x Squeegee, ~ FREE lifetime phone support VinylMaster Cut (Basic Edition) is dedicated vinyl cutting software designed specifically for making vinyl signage. VinylMaster Cut allows you to produce a wide range of vinyl lettering, pinstriping, and general signage, and comes with a suite of text, curve, and object tools. Take your creative vision from your mind to ready to cut computer image file with an easily customizable and intuitive interface. Fonts are vectorized and ready to cut immediately. Edit images, draw shapes, customize text, modify signs, create logos, and so much more. NOTE: This cutter does not work with Mac.

  • Brand: USCutter
  • ASIN: B00CDQGCTW
  • UPC: 892145002175

Yakamoz High Quanlity CB09 CB09U Graphtec Blade Holder Base for Graphtec Cutting Plotter Vinyl Cutter Cameo

Yakamoz High Quanlity CB09 CB09U Graphtec Blade Holder

Yakamoz High Quanlity CB09 Graphtec Blade Holder Cutting Plotter BaseBlade holders are made of imported high quality aluminum alloy and imported resins produced with high precision machines, blade holder with high precision, durability and long service life.Blade holder is matched to the machine, especially imported plotter, is generally not universal.Use the blade: 1, Blade should not extend too long, generally within half a millimeter is better, while paying attention to extended balde longer properly when carve the small print,in order to avoid the blade holder take the carved strokes away. Suitably engraved small print with new cutter and slow down.2, when the word carved with angular phenomenon,you should change the blade to eliminate the problem,if the phenomenon persists after change blade,it should be the holder problem.3, when problem arise the blade holder,try a drop of oil in the bearing and rotate the blade several times to lubricate, if still unresolved, consider replacing the blade holder.Specification:Total length: 51.8 mmMaterials: Aluminum AlloyColour: Sliver, BlackCompatible with: Graphtec CB09U CB09Aluminum-precision Vertical AdjustmentFIT BLADE: Diameter (Clamp): 11.5 mmDiameter (Blade): 0.09 mmNote: The blade is NOT included!!Package Include: 1× Blade holder...

  • Brand: Yakamoz
  • ASIN: B06XRRYPB6
  • UPC: 602701910512

VCCA 15pcs 30/45/60 Degree Precision Cutting Blades Vinyl Cutter Plotter Blades with Springs for Graphtec CB09 Silhouette Cameo

VCCA 15pcs 30/45/60 Degree Precision Cutting Blades Vinyl

Product Features: - Material: tungsten cemented carbide. - Length of Blade: 19mm. - Blade Diameter: 0.9mm. - Color: 30°blue cap, 45°red cap, 60°yellow cap. - The head of the blade is made of Tungsten steel, The body of the blade is made of stainless steel. - The blade come with a high quality soft plastic protector cover, also with 15pcs spring. - With carbide materials, ultra hardness, super toughness, more sharper edge with ultra-fine polishing. Usage Guidance: - Suitable for mahogany, wood, PVC color board, MDF and other precision relief. - 30 Degree Blades (blue cap) for Cutting very small font & intricate line-art logos.(eg: any thin vinyls) - 45 Degree Blades (red cap) for Cutting general fonts and vinyl film.(eg: vinyl for traffic sign, flocks, etc.) - 60 Degree Blades (yellow cap) for Cutting large fonts and thick materials which about 1mm. (eg: reflective material, masking tapes, etc.). NOTICE: * Blade should not extend too long, generally within half a millimeter is better, while paying attention to extended blade longer properly when carve the small print, in order to avoid the blade holder take the carved strokes away. Suitably engraved small print with new cutter and slow down. * When the word carved with angular phenomenon, you should change the blade to e...

  • Brand: VCCA
  • ASIN: B07597Q1H2
  • UPC: 711931993483

Graphtec Plus CE6000-60 24 Inch Professional Vinyl Cutter with Bonus $700 in Software, 2 Year Warranty, Oracal Vinyl, and More

Graphtec Plus CE6000-60 24 Inch Professional Vinyl Cutter

This bundle is only available from Swing Design. Each CE6000 comes standard with: floor stands, rear media roll rack with new media brake, Graphtec Studio software, Cutting Master Plug-in, plus Graphtec's ARMS (Automatic Registration Mark Sensor) system. Professional, reliable servo motors are made for production and accuracy! Contour Cutting with Auto Registration Mark Sensor System Cutting vinyls and contour cutting pre-printed graphics, artwork and media-from large format (up to 48″ with the CE6000-120) solvent based printers, plus water-based inkjet printers and desktop inkjets and laser printers matched up with the CE6000-40 15″ cutter-are what Graphtec cutting plotters are reliably famous for. The new ARMS allows users to increase production efficiency by reducing media waste by expanding the print and cut area. Cutting heat transfer vinyl media and rhinestone design template graphics is a breeze. Cost/Performance Advantage! On the job, the CE6000 series offers real cost/performance advantages over other brands of cutting plotters: rear media roller brake (24″ and 48″), faster cutting speeds and higher cutting force, you'll have the flexibility to handle a wider range of material. The USB 2.0 full speed data interface or RS232C Serial Port ensures a reliable connect...

  • Brand: Graphtec
  • ASIN: B07KPSBV2D
  • UPC: 665788957801

Yakamoz Pack of 15 Blade for Cutting Plotter Vinyl Cutter Graphtec CB09 Cameo Craft ROBO Pro with Springs, 30/45/60 Degree

Yakamoz Pack of 15 Blade for Cutting Plotter

Yakamoz 15pcs CB09 Graphtec Blade Vinyl Cutter Plotter Cutting Blades 30/ 45/ 60 DegreeSpecification:Material: Stainless SteelLength of Blade: 19mmBlade Diameter: 0.9mmColor: 30°yellow cap, 45°red cap, 60°blue cap.30°Blades for Cutting large fonts and thick materials which is about 1mm.45°Blades for Cutting general fonts and vinyl film which within 1mm.60°Blades for Cutting very small font & intricate line-art logos which within 0.5mm.Features:Tool consistency.Materials with ultra - hardness, carbide, super - toughness, longer wear and edge grinding with ultrafine polishing, edge more.Suitable for polishing wood, pvc mahogany color, precision, MDF and other relief.Usage:1.  Blade should not extend too long,generally within half a millimeter is better, while paying attention to extended balde longer properly when carve thesmall print, in order to avoid the blade holder take the carved strokes away. Suitably engraved small print with new cutter and slow down.2. When the word carved with angular phenomenon,you should change the blade to eliminate the problem,if the phenomenon persists after change blade,it should be the holder problem.3. When problem arise the blade holder,try a drop of oil in the bearing and rotate the blade several times to lubricate, if still unresolved, c...

  • Brand: Yakamoz
  • ASIN: B06XRRYRPD
  • UPC: 602701910529

Tuhoomall CB09 CB09U Graphtec Blade Holder Base with 15pcs Vinyl Cutter Plotter Cutting Blades 30/45/60 Degree

Tuhoomall CB09 CB09U Graphtec Blade Holder Base with

CB09 Graphtec Blade Holder Vinyl Plotter Holder with 15pcs Blades Compatible with: Graphtec CB09U CB09 Which can help install: You can use a magnifying glass, strong light and most importantly handling the blade and spring with tweezers (which will save you sticking yourself). How to set your depth by using a scrap of vinyl? Using your hand to hold and pull the knife housing with the blade set to where you can hardly see it...and with a little pressure you pull it across the vinyl. Do this several times while adjusting the screw, until it does not cut the backing paper. you can laid a magazine under the vinyl to protect the table. Please set up the depth just right. Be sure to do a depth test cut so you don't ruin your project!just compare it to the Cameo blade and then do a test cut. Once you've installed the blade, turn the button at the other end of the holder to adjust the cut thickness. unscrew the black tip, insert the blade, add the spring, screw the tip back on. The hard part is making sure the blade goes to the right place and the spring stays on. Tips: 1. Blade should not extend too long, generally within half a millimeter is better, while paying attention to extended blade longer properly when carve the small print, in order to avoid the blade holder take the carved...

  • Brand: Tuhoomall
  • ASIN: B07K13QKCJ
  • UPC: 712324980745

Yoton 45 Degree CB09 Graphtec Vinyl Plotter Cutter Blade 15pcs(with Springs)

Yoton 45 Degree CB09 Graphtec Vinyl Plotter Cutter

CB09 Graphtec Blade for Vinyl Plotter Cutter 15pcs 45Degree + spring Features:    Cutting Plotter applicable:Graphtec CB09    Made of Cemented Carbide.    High Quality and Extra long life.Specifications:     Blade size: 0.9mm (diameter)    With: spring    Material: Extra accuracy & high density tungsten cemented carbide    Angle:    45º---red cap      (Other angels on sale) Package Included:      15pcs 45º Cutting Plotter Blades+15pcs springs Product show: Item specifics:Color: OtherModel number: Cutting Plotter BladesType: Other

  • Brand: Yoton
  • ASIN: B07RJD9YL8
  • UPC: 794946330306

Yaegoo CB09 CB09U Graphtec Blade Holder Base with 15pcs Graphtec Blade Vinyl Cutter Plotter Cutting Blades 30/45/60 Degree

Yaegoo CB09 CB09U Graphtec Blade Holder Base with

Graphtec Blade Holder with 15pcs 30 45 60 Degree Cutting Blades Specification: Material: hard alloy Length of holder: 51.8mm Length of blade: 12mm Degree of Blade: 30 ° / 45 ° / 60 ° Features: Tool consistency. Materials with ultra - hardness, carbide, super - toughness, longer wear and edge grinding with ultrafine polishing, edge more. Suitable for polishing wood, pvc mahogany color, precision, MDF and other relief. Usage: 1. Blade should not extend too long, generally within half a millimeter is better, while paying attention to extended balde longer properly when carve the small print, in order to avoid the blade holder take the carved strokes away. Suitably engraved small print with new cutter and slow down. 2. When the word carved with angular phenomenon,you should change the blade to eliminate the problem,if the phenomenon persists after change blade, it should be the holder problem. 3. When problem arise the blade holder,try a drop of oil in the bearing and rotate the blade several times to lubricate, if still unresolved, consider replacing the blade holder. Package Included: 1 x Blade holder 5 x 30° Cutter Blade 5 x 45° Cutter Blade 5 x 60° Cutter Blade

  • Brand: Yaegoo
  • ASIN: B07QWCHJBL
  • UPC: 733810499268

Graphtec Plus 15 Inch Desktop Vinyl Cutter & Plotter Bundle with $700 in Software and 2 Year Warranty

Graphtec Plus 15 Inch Desktop Vinyl Cutter &

The CE6000 are Graphtec's professional class of cutter plotter series, and updates the extremely successful CE5000 series with improved features. Up to 300 grams of down force. Made by the owners of Silhouette Cameo

  • Brand: Swing Design
  • ASIN: B06Y1WDQ16
  • UPC: 665788902443

Graphtec CE-50 Lite 20 Inch Desktop Vinyl Cutter with $700 in Software & Warranty

Graphtec CE-50 Lite 20 Inch Desktop Vinyl Cutter

The CE6000 are Graphtec's professional class of cutter plotter series, and updates the extremely successful CE5000 series with improved features. Up to 210 grams of down force. Made by the owners of Silhouette Cameo

  • Brand: Graphtec
  • ASIN: B07C28LKHQ
  • UPC: 665788948625

15pcs 60 degree Graphtec CB15/CB15U Vinyl Cutter Plotter/Printer Blades

15pcs 60 degree Graphtec CB15/CB15U Vinyl Cutter Plotter/Printer

Features: Made of Cemented Carbide. High quality and Extra long life. Specifications: Standard Vinyl blades for Graphtec High quality and extra long life Approx. Diameter: 1.5mm, Length: 24mm Package with a Safe Plastic Box: 5pc/case, 3 X case Angle: 60º (We also have other angles,pls check in our stock!) Package Included: 15pcs 60º Cutting Plotter Blades

  • Color: Yellow
  • Brand: wolovo
  • ASIN: B01M4ON77Y
  • UPC: 699989640354

Printer Parts 10pcs Vinyl Cutting Plotter Pinch Roller Yoton graphtec CE5000 Paper Pressure Rollers 4x11x16mm

Printer Parts 10pcs Vinyl Cutting Plotter Pinch Roller

product description 10pcs Vinyl Cutting Plotter Pinch Roller Yoton graphtec CE5000 paper pressure rollers 4x11x16mm product specifics Yoton pinch roller : Suit : For Yoton printer Packing : Safety packing by cartoon box Sell : 10pcs Diameter : 16mm Height : 11mm Diameter for hole : 4mm attention please product display Item specifics:Model number: pinch roller Yoton Type: OtherItem name : pinch rollerUse for : for Yoton eco solvent plotter printerPlace of original : chinaModel size : 4x11x16mmOne lot : 10pcsDiameter : 16Diameter for hole: 4mmHeight: 11mmDelivery time : 1-2 day after confrim paymentPackage : carton

  • Brand: Yoton
  • ASIN: B07RHNW497

USCutter 14 inch MH Craft Vinyl Cutter Plotter With VinylMaster (Design and Cut) Software

USCutter 14 inch MH Craft Vinyl Cutter Plotter

Note: This cutter does not work with Mac/Apple computers.The USCutter MH-Series are the best value vinyl cutters available anywhere! Comes with VinylMaster Cut and also works with other popular software (like Sure Cuts A Lot, Flexi, SignBlaser and SignCut Productivity Pro) through standard Roland PNC1000 drivers.- 14-inch Vinyl Cutter/ Plotter- Three connectivity options: Parallel, Serial, and USB- USB connection is accomplished through serial conversion- 3 x 45 deg. blades included- Pen adapter (use to plot instead of cut)- Cover- 2 pinch rollers- 90 Days warranty on the cutter- Free lifetime phone support - even after out of warrantyFeatures:- Dual position carriage (front position for cut-through, rear position for standard vinyl).- Roland compatible blade holder gives you access to the most economical blades available.- Two fully adjustable pinch-rollers allow you to use a flexible range of materials.Included software VinylMaster Cut (Design and Cut):VinylMaster Cut (Basic Edition) is dedicated vinyl cutting software designed specifically for making vinyl signage. VinylMaster Cut allows you to produce a wide range of vinyl lettering, pinstriping, and general signage, and comes with a suite of text, curve, and object tools. Take your creative vision from your mind to ready to ...

  • Brand: MH Series
  • ASIN: B01AM8M1GU
  • UPC: 892145002823

15pcs 30 degree Graphtec CB15/CB15U Vinyl Cutter Plotter/Printer Blades

15pcs 30 degree Graphtec CB15/CB15U Vinyl Cutter Plotter/Printer

Features: Made of Cemented Carbide. High quality and Extra long life. Specifications: Standard Vinyl blades for Graphtec High quality and extra long life Approx. Diameter: 1.5mm, Length: 24mm Package with a Safe Plastic Box: 5pc/case, 3 X case Angle: 30º (We also have other angles,pls check in our stock!)

  • Color: Yellow
  • Brand: wolovo
  • ASIN: B01MFD7KHT
  • UPC: 699928029318

YaeTek CB09 CB09U Graphtec Blade Holder Base with 15pcs Graphtec Blade Vinyl Cutter Plotter Cutting Blades 30/45/60 Degree

YaeTek CB09 CB09U Graphtec Blade Holder Base with

Graphtec Blade Holder with 15pcs 30 45 60 Degree Cutting Blades Specification: Material: hard alloy Length of holder: 51.8mm Length of blade: 12mm Degree of Blade: 30 ° / 45 ° / 60 °   Features: Tool consistency. Materials with ultra - hardness, carbide, super - toughness, longer wear and edge grinding with ultrafine polishing, edge more. Suitable for polishing wood, pvc mahogany color, precision, MDF and other relief. Usage:1.  Blade should not extend too long, generally within half a millimeter is better, while paying attention to extended balde longer properly when carve the small print, in order to avoid the blade holder take the carved strokes away. Suitably engraved small print with new cutter and slow down. 2. When the word carved with angular phenomenon,you should change the blade to eliminate the problem,if the phenomenon persists after change blade, it should be the holder problem. 3. When problem arise the blade holder,try a drop of oil in the bearing and rotate the blade several times to lubricate, if still unresolved, consider replacing the blade holder.   Package Included: 1 x  Blade holder 5 x 30° Cutter Blade 5 x 45° Cutter Blade 5 x 60° Cutter Blade

  • Brand: YAETEK
  • ASIN: B07K8DJFWL
  • UPC: 733810487326

GRAPHTEC CE6000-120 Vinyl Cutter

GRAPHTEC CE6000-120 Vinyl

Graphtec's CE6000 feature faster cut time, precision cutting and a fast and accurate digital servo motor. Graphtec is known for quality and long-lasting machines and their new CE6000 cutters don't disappoint! These cutters also come equipped with the new Graphtec Studio Software, which makes designing and cutting an easy task. Graphtec Studio is an easy to use design software that has been developed exclusively for Graphtec to create original designs to be used for a variety of graphics applications such as signs, banners, print and cut decals, apparel decoration, and other two-dimensional projects. These cutters also feature a plug-in for Adobe Illustrator and CorelDraw. Features: Maximum cutting area: 47.8" x 164' long Auto registration mark sensor (perfect for print and cuts) Fast and accurate digital servo motor 4 point, dual-axis skew correction Tangential control enhanced precision Graphtec Studio Software Plug-ins available for Adobe Illustrator and CorelDraw Specifications: Maximum cutting area: 47.8" x 164' Compatible media widths: Min - 2" to Max - 53" Maximum cutting speed: 40" per second Maximum cutter force: 20 gf - 450 gf Maximum media thickness: 10 mils Cut thru media and backing: When using Cutting Mat/Carrier Sheet only* Compatible media types: self-adhesive viny...

  • Brand: Graphtec
  • ASIN: B00AXYOORI

Graphtec Fc8600-160 64-Inch Plotter

Graphtec Fc8600-160 64-Inch

FC8600-160 includes new drive technology, enabling users to obtain up to 50 feet guaranteed tracking. Also features 58.5 ips top cutting speed, programmable user settings, and advanced 4-point ARMS automatic registration mark sensor for easy contour cutting. Price includes plug in software for Adobe Illustrator and Corel Draw, standard floor stands, and dual media catch basket. Max. media width is 72 inches.

  • Color: Black
  • Brand: Graphtec
  • ASIN: B00E3C3ZFI

6pcs 4x11x16mm roland graphtec China cutting plotter vinyl cutter pinch roller wheel Japan bearing+copper+rubber ...

6pcs 4x11x16mm roland graphtec China cutting plotter vinyl

6pcs 4x11x16mm roland graphtec China cutting plotter vinyl cutter pinch roller wheel Japan bearing+copper+rubber

  • Brand: everluminous
  • ASIN: B078KN16H4

5x30° High Quality Graphtec Vinyl Cutter Plotter Blades

5x30° High Quality Graphtec Vinyl Cutter Plotter

Shipping: Quality is Guarantee 5x30° High Quality Graphtec Vinyl Cutter Plotter Blades

  • Brand: Uniqstore
  • ASIN: B005M0LEE4

GRAPHTEC FC8600-60 Vinyl Cutter

GRAPHTEC FC8600-60 Vinyl

Maximum cutting area: 24" wide x 164' long The FC8600 series high-performance cutting plotter is an industry leader for sign makers, graphic artists, automotive aftermarket professionals, countertop installers and other related users. The FC8600 has added features: 3 inch wide user-friendly LCD control Panel, a Dual configuration function (two-user set and save customized conditions), included Ethernet capability (run multiple machines from one location), and an option for additional push rollers with 3 tension settings and the new 5th Generation ARMS system (automatically detects registration marks with color variants). Graphtec's next generation ARMS system adjusts for several types of potential print distortions, allowing for accurate contour cutting of pre-printed images and decals. New features of the new ARMS: Optical Sensor for Auto Alignment Sensitivity adjustment for registration mark detection on various media and colors The FC8600 series features a maximum cutting speed of 58.5 in/sec, 4.0G maximum acceleration, and 20 to 600g selectable cutting forces, allowing users to process diamond grade, high-intensity reflective film, sandblast resist rubber, automotive window & paint protection films, self-adhesive vinyl, AmberlithTM and RubylithTM, among other medi...

  • Brand: Graphtec
  • ASIN: B00E3C3YEA
  • UPC: 088022109017

15pcs 30/45/60 degree Graphtec CB09U CB09 Blades Vinyl Plotter Cutter + Blade Housing Holder

15pcs 30/45/60 degree Graphtec CB09U CB09 Blades Vinyl

Features: Cutting Plotter applicable:Graphtec CB09 Made of Cemented Carbide. High quality and Extra long life. Specifications: Blade size: 0.9mm (diameter) With: spring Material: Extra accuracy & high density tungsten cemented carbide Angle: 30/45/60º (Other angels on sale) Package Included: 5pcs 30º Cutting Plotter Blades 5pcs 45º Cutting Plotter Blades 5pcs 60º Cutting Plotter Blades 15pcs springs Blade Holder Housing

  • Color: Yellow
  • Brand: wolovo
  • ASIN: B01M9GH26V
  • UPC: 699992172545

15pcs 45 degree Graphtec CB15/CB15U Vinyl Cutter Plotter/Printer Blades

15pcs 45 degree Graphtec CB15/CB15U Vinyl Cutter Plotter/Printer

Features: Made of Cemented Carbide. High quality and Extra long life. Specifications: Standard Vinyl blades for Graphtec High quality and extra long life Approx. Diameter: 1.5mm, Length: 24mm Package with a Safe Plastic Box: 5pc/case, 3 X case Angle: 45º (We also have other angles,pls check in our stock!) Package Included: 15pcs 45º Cutting Plotter Blades

  • Color: Yellow
  • Brand: wolovo
  • ASIN: B01M729U0A
  • UPC: 699949573890

Graphtec America CE6000 Plus 24" Vinyl Cutter

Graphtec America CE6000 Plus 24" Vinyl

Graphtec CE6000-60P Plotter with Oracal 751 6 Colors and Weeding Kit Why buy from USCutter - USCutter is a 10 year Graphtec Preferred Authorized Reseller and Service Center. - Bonus: 6 color bundle Oracal 751 24" x 10' each roll. Cast vinyl that goes on cars, curves, anything with contours, for long-term durable results. (Note: In very rare circumstances some of the colors stated here may be substituted with different colors without further notice in order to ship your full order on time.) - Bonus: USCutter weeding kit - zip case with tweezers, dentalpick, boxcutter, lighted magnifying glass, felt-tip squeegee, small knife, tape measure. - And there is more. The Graphtec CE-6000 PLUS has 450gf of downforce pressure for cutting very thin films such as window tint all the way up to the toughest sand-blast mask and reflective materials. The new PLUS models are fast. It has a max cutting speed of 39" per sec (in all directions) for quick output of intricate cut jobs. It also includes 3 licenses for Graphtec Pro Studio, a complete design and cutting software solution similar to Illustrator or CorelDRAWa USD2100 value. - Reliable long length tracking up to 196.85" long. - The built-in front control panel provides complete parameter control including eight preset cutting conditions, ...

  • Brand: Graphtec America
  • ASIN: B00EV2I9XS
  • UPC: 665789933255

15PCS 30 Degree Graphtec CB09U CB09 Blades Vinyl Plotter Cutter + 1PCS Blade Holder Housing

15PCS 30 Degree Graphtec CB09U CB09 Blades Vinyl

Features: Cutting Plotter applicable:Graphtec CB09 Made of Cemented Carbide. High quality and Extra long life. Specifications: Blade size: 0.9mm (diameter) With: spring Material: Extra accuracy & high density tungsten cemented carbide Angle: 30º---yellow cap (Other angels on sale) Package Included: 15pcs 30º Cutting Plotter Blades+15pcs springs+Blade Holder

  • Color: Yellow Red Blue
  • Brand: wolovo
  • ASIN: B01M693LPI
  • UPC: 699944384071

everluminous 14mm liyu Rabbit Graphtec CB09 Silhouette Cameo Portrait Craft robo Cutting Plotter Vinyl Cutter Pen Holder

everluminous 14mm liyu Rabbit Graphtec CB09 Silhouette Cameo

  • Color: Alu
  • Brand: everluminous
  • ASIN: B071DQNJJT

Graphtec 60° Cb15 Craft Robo Vinyl Cutter Plotter, Set of 5

Graphtec 60° Cb15 Craft Robo Vinyl Cutter Plotter,

For cutting High Intensity Reflective media.

  • Brand: Carbide World
  • ASIN: B002NNDMW0

Yoton 4PCS Pinch Roller for Yoton Graphtec Cutting Plotter Rubber Roller Paper Pressure Wheel 4X11X16MM Vinyl Cutter Spare Parts - (Color: 4X11X16MM)

Yoton 4PCS Pinch Roller for Yoton Graphtec Cutting

Note:1.All the pictures are taken by actural sample.2.If you can't find the printer spare parts you want in our store,please contact us or leaving messages to us,we will try our best to help you.3.Any questions,please feel free to contact us,we will reply as soon as possible,thank you!4PCS Pinch roller for Yoton Graphtec cutting plotter Rubber Roller paper Pressure wheel 4X11X16MM Vinyl Cutter spare partsModel explain:3X11X16MM:inner diameter 3mm , Height 11mm , Outter diameter 16mm4X11X16MM:inner diameter 4mm , Height 11mm , Outter diameter 16mmItem specifics:Model number: Yoton cutter pinch rollerType: OtherColor: BlackGrade: High qualityPacking: 4PCSUse for: Yoton cutters plotters

  • Color: 4X11X16MM
  • Brand: Yoton
  • ASIN: B07RJDSKXB
  • UPC: 794946454125
Similar Graphtec Vinyl Plotter Shopping Results