HobbyStar 32DP Pinion Gear, 16T, Hard-Anodized Aluminum, 1/8", 3.175mm

HobbyStar 32DP Pinion Gear, 16T, Hard-Anodized Aluminum, 1/8",

  • Brand: HobbyStar
  • ASIN: B014U2OB2Q
  • UPC: 638888380923

Robinson Racing 1213 Extra Hard High Carbon Steel Motor Pinion Gear, 5Mm Bore, 1.0 Mod Pitch, 13 Tooth

Robinson Racing 1213 Extra Hard High Carbon Steel

Extra hard high carbon motor pinions are built to last with our hi-performance GEN3 steel slipper units. Made from high carbon steel and then heat treated to increase the hardness of the surface even further. High carbon steel is naturally lower in friction and adhesion than milder grades of steel making these gears ideal for use with metal spur gears. All pinions precision machined and stamped with the number of teeth. One 4 m/M set Screw included. 2 m/M Allen wrench (not included) Fits the 4 m/M set Screw. Can be run on motors using a 5 M/M motor shaft including Traxxas, associated, and Hei models or for any heavy duty application. Tech note: rrp#1200 5 m/M to 1/8 inch reducer sleeve required for 1/8 inch shaft motors.

  • Color: Brown/a
  • Brand: Robinson Racing Products
  • ASIN: B0015BLRHI
  • UPC: 719696012135

Robinson Racing Products 8717 Hard Bore 0.8 Module Pinion Gear, 17T, 5mm

Robinson Racing Products 8717 Hard Bore 0.8 Module

OverviewExtra hard high carbon brushless motor pinions are built to last with hi-performance GEN3 steel slipper units. Pinion is precision machined and stamped with the number of teeth. One 4mm set screw included. 2mm allen wrench (not included) fits the 4mm set screw. Can be run on cars using a 5mm motor shaft. 5mm to 1/8 inch Reducer Sleeve required for 1/8 inch shaft motors.Note: 32 pitch and .8 module gears can be used together with no adverse affects such as increased noise or increased wear. The difference is that .8 module gears have a slightly larger outside diameter per tooth, roughly .00027 of an inch.

  • Brand: Robinson Racing Products
  • ASIN: B0019OHK4A
  • UPC: 787793305054

Robinson Racing Products 8713 Hard Bore 0.8 Module Pinion Gear, 13T, 5mm

Robinson Racing Products 8713 Hard Bore 0.8 Module

OverviewExtra hard high carbon brushless motor pinions are built to last with hi-performance GEN3 steel slipper units. Pinion is precision machined and stamped with the number of teeth. One 4mm set screw included. 2mm allen wrench (not included) fits the 4mm set screw. Can be run on cars using a 5mm motor shaft. 5mm to 1/8 inch Reducer Sleeve required for 1/8 inch shaft motors.Note: 32 pitch and .8 module gears can be used together with no adverse affects such as increased noise or increased wear. The difference is that .8 module gears have a slightly larger outside diameter per tooth, roughly .00027 of an inch.

  • Brand: Robinson Racing Products
  • ASIN: B0019OJ660
  • UPC: 719696087133

HobbyStar 32DP Pinion Gear, 12T, Hard-Anodized Aluminum, 1/8", 3.175mm

HobbyStar 32DP Pinion Gear, 12T, Hard-Anodized Aluminum, 1/8",

  • Brand: HobbyStar
  • ASIN: B014U2O752
  • UPC: 638888380886

Yeah Racing Pinion Gear Super Hard Combo set (48P 33T-38T) 6pcs #MG-48033-038

Yeah Racing Pinion Gear Super Hard Combo set

The motor gear series including 2 major types of Pitch Pinion - the 48 Pitch Pinion and the 64 Pitch Pinion. The 48 Pitch Pinion available from 15 teeth to 38 teeth. The 64 Pitch Pinion available from 17 teeth to 52 teeth. The Yeah Racing Aluminum Motor Gear are made by 7075 high quality aluminum with titanium coated surface. Feature: For: 1:10 EP, fit on 540 Motor Material: 7075 Aluminum Color: Titanium Specification: Pitch: 48 Teeth: 33~38 Include: 48 Pitch Pinion 33 Teeth (1 Pc) 48 Pitch Pinion 34 Teeth (1 Pc) 48 Pitch Pinion 35 Teeth (1 Pc) 48 Pitch Pinion 36 Teeth (1 Pc) 48 Pitch Pinion 37 Teeth (1 Pc) 48 Pitch Pinion 38 Teeth (1 Pc) Set Screw (6 pcs)

  • Brand: Yeah Racing
  • ASIN: B00TDG2I52

Robinson Racing 2017 Hard 48 Pitch Machined 17T Pinion 5Mm Bore

Robinson Racing 2017 Hard 48 Pitch Machined 17T

The Robinson Racing Products team is dedicated to producing the finest gears and high-performance drive-related accessories available, from HARD-CORE racer to Week-End Warrior, we have you covered. All of our products are precision manufactured in the U.S.A. And have been proven on the track, off-road, and in countless back-yards so you can depend on them when it counts for maximum performance and maximum fun. We back up our confidence with more than 30 years of experience in manufacturing and racing hi-performance RC products.

  • Color: Brown/a
  • Brand: Robinson Racing Products
  • ASIN: B00681QH1Q
  • UPC: 719696020178

Robinson Racing Products Robinson Racing 1225 Extra Hard High Carbon Steel Motor Pinion Gear, 5Mm Bore, 1.0 Mod Pitch, 25 Tooth, Brown/A

Robinson Racing Products Robinson Racing 1225 Extra Hard

Extra hard high carbon motor pinions are built to last with our hi-performance GEN3 steel slipper units. Made from high carbon steel and then heat treated to increase the hardness of the surface even further. High carbon steel is naturally lower in friction and adhesion than milder grades of steel making these gears ideal for use with metal spur gears. All pinions precision machined and stamped with the number of teeth. One 4 m/M set Screw included. 2 m/M Allen wrench (not included) Fits the 4 m/M set Screw. Can be run on motors using a 5 M/M motor shaft including Traxxas, associated, and Hei models or for any heavy duty application. Tech note: rrp#1200 5 m/M to 1/8 inch reducer sleeve required for 1/8 inch shaft motors.

  • Color: Brown/a
  • Brand: Robinson Racing Products
  • ASIN: B00AU29O6O
  • UPC: 785239682974

Hot Racing HAG814 14t 48p Hard Anodized Aluminum Pinion Gear

Hot Racing HAG814 14t 48p Hard Anodized Aluminum

14 tooth/48 pitch Hard Anodized aluminum pinion gear from Hot Racing. FEATURES: 6061 Aluminum ConstructionShort ShankCNC Precision MachinedStamped w/number of teeth for easy identificationBeveled teeth edgeYOU WILL RECEIVE: One pinion gearOne pinion set screwREQUIREMENTS: Allen wrench or ball driver for mounting. SPECIFICATIONS: Teeth count: 14 teethTeeth pitch: 48 pitch width: 9.7mm (0.38")Inner diameter: 3.2mm (.125")COMMENTS: Can be used in most applications where a 48pitch pinion recommended. Hard Anodizing or Hardcoat is an electrochemically produced grey layer of hard aluminum oxide on the surface of aluminum components. . description revised by: KS October 30, 2012

  • Brand: Hot Racing
  • ASIN: B00A29AGSK
  • UPC: 083745355376

Robinson Racing Products 48P Hard Coated Aluminum Pinion Gear, 27T, RRP1327

Robinson Racing Products 48P Hard Coated Aluminum Pinion

OverviewThe "Pro" Pinions are precision machined from aircraft aluminum, lightened and then they're coated twice with a super hard, black anodize. Recommended for onroad, but they can be run off road. Pinions are stamped with tooth number. 1/8 inch bore. One 5-40 set screw included.

  • Brand: Robinson Racing
  • ASIN: B0006N6T88
  • UPC: 719696013279

Robinson Racing Products 0.5 Module Hard Blackened Steel Mini Pinion 2mm, 15T, RRP1815

Robinson Racing Products 0.5 Module Hard Blackened Steel

This is the Robinson Racing 15 Tooth .5 Mod Mini Pinion Gear. FEATURES Steel construction with blackened finish for high strength and durability INCLUDES 15 Tooth .5 Mod Mini Pinion Gear 3mm Set Screw SPECIFICATIONS Number of Teeth: 15 Hole Diameter: 2mm Gear Pitch: .5

  • Brand: Robinson Racing
  • ASIN: B00JNL5PY8
  • UPC: 719696018151

Robinson Racing Products 48P Hard Coated Aluminum Pinion Gear, 45T, RRP1345

Robinson Racing Products 48P Hard Coated Aluminum Pinion

OverviewThe "Pro" Pinions are precision machined from aircraft aluminum, lightened and then they're coated twice with a super hard, black anodize. Recommended for onroad, but they can be run off road. Pinions (14 thru 35) stamped with tooth number. 1/8 inch bore. One 5-40 set screw included.

  • Brand: Robinson Racing
  • ASIN: B001LGVR22
  • UPC: 885402302590

Robinson Racing 1220 Extra Hard High Carbon Steel Motor Pinion Gear, 5Mm Bore, 1.0 Mod Pitch, 20 Tooth

Robinson Racing 1220 Extra Hard High Carbon Steel

Extra hard high carbon motor pinions are built to last with our hi-performance GEN3 steel slipper units. Made from high carbon steel and then heat treated to increase the hardness of the surface even further. High carbon steel is naturally lower in friction and adhesion than milder grades of steel making these gears ideal for use with metal spur gears. All pinions precision machined and stamped with the number of teeth. One 4 m/M set Screw included. 2 m/M Allen wrench (not included) Fits the 4 m/M set Screw. Can be run on motors using a 5 M/M motor shaft including Traxxas, associated, and Hei models or for any heavy duty application. Tech note: rrp#1200 5 m/M to 1/8 inch reducer sleeve required for 1/8 inch shaft motors.

  • Color: Brown/a
  • Brand: Robinson Racing Products
  • ASIN: B0015BNZYQ
  • UPC: 719696012203

Robinson Racing Products 5mm-1/8 Reducer Sleeve, RRP1200

Robinson Racing Products 5mm-1/8 Reducer Sleeve,

5mm-1/8INCH REDUCER SLEEVE

  • Brand: Robinson Racing
  • ASIN: B0015BJNH4
  • UPC: 719696012005

Robinson Racing Products 48P Hard Coated Aluminum Pinion Gear, 41T, RRP1341

Robinson Racing Products 48P Hard Coated Aluminum Pinion

OverviewThe "Pro" Pinions are precision machined from aircraft aluminum, lightened and then they're coated twice with a super hard, black anodize. Recommended for onroad, but they can be run off road. Pinions (14 thru 35) stamped with tooth number. 1/8 inch bore. One 5-40 set screw included.

  • Brand: Robinson Racing
  • ASIN: B001LGX3BK
  • UPC: 719696013415

Robinson Racing 1031 Hard Nickel Plated Steel Motor Pinion Gear, 1/8" Bore, 48 Pitch, 31 Tooth

Robinson Racing 1031 Hard Nickel Plated Steel Motor

The 48 pitch hard nickel plated alloy steel pinions are precision cut gears that last and last when used with a plastic spur gear. In sizes 12 through 40 teeth. Pinions stamped with tooth number. The bright nickel finish protects the steel from corrosion and increases lubricity of the gear by reducing friction and adhesion between the pinion and spur gear. 1/8 inch bore. One 5-40 set Screw included. 1/16 inch Allen wrench (not included) Fits the 5/40 set screw.

  • Color: Brown/a
  • Brand: Robinson Racing Products
  • ASIN: B0006O7U1C
  • UPC: 719696010315

Hot Racing HAG826 26t 48p Hard Anodized Aluminum Pinion Gear 1/8 Inch Bore

Hot Racing HAG826 26t 48p Hard Anodized Aluminum

This is a 26 tooth, 48 pitch Hard Anodized aluminum pinion gear from Hot Racing. FEATURES: 6061 Aluminum ConstructionShort ShankCNC Precision MachinedStamped w/number of teeth for easy identificationBeveled teeth edgeINCLUDES: One pinion gearOne pinion set screwREQUIREMENTS: Allen wrench or ball driver for mounting. SPECIFICATIONS: Teeth count: 26 teethTeeth pitch: 48 pitchwidth: 9.7mm (0.38")Inner diameter: 3.2mm (.125")COMMENTS: Can be used in most applications where a 48pitch pinion recommended. Hard Anodizing or Hardcoat is an electrochemically produced grey layer of hard aluminum oxide on the surface of aluminum components.

  • Brand: Hot Racing
  • ASIN: B00A29BF8K
  • UPC: 083745292725

Robinson Racing 1040 Hard Nickel Plated Steel Motor Pinion Gear, 1/8" Bore, 48 Pitch, 40 Tooth

Robinson Racing 1040 Hard Nickel Plated Steel Motor

The 48 pitch hard nickel plated alloy steel pinions are precision cut gears that last and last when used with a plastic spur gear. In sizes 12 through 40 teeth. Pinions stamped with tooth number. The bright nickel finish protects the steel from corrosion and increases lubricity of the gear by reducing friction and adhesion between the pinion and spur gear. 1/8 inch bore. One 5-40 set Screw included. 1/16 inch Allen wrench (not included) Fits the 5/40 set screw.

  • Color: Brown/a
  • Brand: Robinson Racing Products
  • ASIN: B00AU29JY6
  • UPC: 719696010407

Robinson Racing Products 32P Hard Black Steel Spur, 54T: Slash, Stampede 4x4, RRP7954

Robinson Racing Products 32P Hard Black Steel Spur,

Key FeaturesCombines a steel spur gear and a high-performance one-piece slipper padStock gear adapter and 3-pad slipper eliminatedOversized one-piece slipper performs with the most aggressive enginesFor use in the Revo 3.3 and SlayerOverviewHigh Performance One Piece Slipper Pad and Hardened Steel Spur Gear hold up to the most aggresive engines.

  • Brand: Robinson Racing
  • ASIN: B004Q6LBT8
  • UPC: 719696079541

Robinson Racing 1025 Hard Nickel Plated Steel Motor Pinion Gear, 1/8" Bore, 48 Pitch, 25 Tooth

Robinson Racing 1025 Hard Nickel Plated Steel Motor

The 48 pitch hard nickel plated alloy steel pinions are precision cut gears that last and last when used with a plastic spur gear. In sizes 12 through 40 teeth. Pinions stamped with tooth number. The bright nickel finish protects the steel from corrosion and increases lubricity of the gear by reducing friction and adhesion between the pinion and spur gear. 1/8 inch bore. One 5-40 set Screw included. 1/16 inch Allen wrench (not included) Fits the 5/40 set screw.

  • Color: Brown/a
  • Brand: Robinson Racing Products
  • ASIN: B0006O7TWM
  • UPC: 719696010254

Robinson Racing Products Hard Blackened Steel Mini Pinion 2mm, .5 Mod 18T, RRP1818

Robinson Racing Products Hard Blackened Steel Mini Pinion

ROBINSON 118T STEALTH GEAR

  • Brand: Robinson Racing
  • ASIN: B00JNL5RIM
  • UPC: 719696018182

Robinson Racing Products 1214 X Hard Pinion 14, 5mm (1.0 Mod)

Robinson Racing Products 1214 X Hard Pinion 14,

OverviewExtra Hard Steel 5mm Bore (1.0 module) Brushless Motor Pinions. One 4x4mm set screw included. 2mm allen wrench (not included) fits the 4mm set screw. Can be run on cars using a 5mm motor shaft. These pinions mate with most 1/8 scale nitro spur gears.5mm to 1/8 inch Reducer Sleeve required for 1/8 inch shaft motors.

  • Brand: Robinson Racing Products
  • ASIN: B0015BLTOE
  • UPC: 719696012142

Robinson Racing Products 48P Hard Coated Aluminum Pinion Gear, 12T, RRP1312

Robinson Racing Products 48P Hard Coated Aluminum Pinion

OverviewThe "Pro" Pinions are precision machined from aircraft aluminum, lightened and then they're coated twice with a super hard, black anodize. Recommended for onroad, but they can be run off road. Pinions are stamped with tooth number. 1/8 inch bore. One 5-40 set screw included.

  • Brand: Robinson Racing
  • ASIN: B0006MZUJI
  • UPC: 719696013125

Hot Racing HAG827 27t 48p Hard Anodized Aluminum Pinion Gear 1/8 Inch Bore

Hot Racing HAG827 27t 48p Hard Anodized Aluminum

This is a 27 tooth, 48 pitch Hard Anodized aluminum pinion gear from Hot Racing. FEATURES: 6061 Aluminum ConstructionShort ShankCNC Precision MachinedStamped w/number of teeth for easy identificationBeveled teeth edgeINCLUDES: One pinion gearOne pinion set screwREQUIREMENTS: Allen wrench or ball driver for mounting. SPECIFICATIONS: Teeth count: 27 teethTeeth pitch: 48 pitchwidth: 9.7mm (0.38")Inner diameter: 3.2mm (.125")COMMENTS: Can be used in most applications where a 48pitch pinion recommended. Hard Anodizing or Hardcoat is an electrochemically produced grey layer of hard aluminum oxide on the surface of aluminum components.

  • Brand: Hot Racing
  • ASIN: B014YWSZZQ
  • UPC: 083745293326

Robinson Racing 1219 Extra Hard High Carbon Steel Motor Pinion Gear, 5Mm Bore, 1.0 Mod Pitch, 19 Tooth

Robinson Racing 1219 Extra Hard High Carbon Steel

Extra hard high carbon motor pinions are built to last with our hi-performance GEN3 steel slipper units. Made from high carbon steel and then heat treated to increase the hardness of the surface even further. High carbon steel is naturally lower in friction and adhesion than milder grades of steel making these gears ideal for use with metal spur gears. All pinions precision machined and stamped with the number of teeth. One 4 m/M set Screw included. 2 m/M Allen wrench (not included) Fits the 4 m/M set Screw. Can be run on motors using a 5 M/M motor shaft including Traxxas, associated, and Hei models or for any heavy duty application. Tech note: rrp#1200 5 m/M to 1/8 inch reducer sleeve required for 1/8 inch shaft motors.

  • Color: Brown/a
  • Brand: Robinson Racing Products
  • ASIN: B0015BS8TS
  • UPC: 719696012197

Robinson Racing Products 64P Hard Coated Aluminum Pro Pinion Gear, 44T, RRP4344

Robinson Racing Products 64P Hard Coated Aluminum Pro

Overview"Pro" Pinions are precision machined from aircraft grade aluminum, lightened and coated twice with a super hard, black anodize. Recommended for onroad, but they can be run off road. Tooth number stamped on each pinion. 1/8 inch bore. One 5-40 set screw included. 1/16 inch allen wrench (not included) fits the 5/40 set screw.

  • Brand: Robinson Racing
  • ASIN: B0006O7Y6S
  • UPC: 719696043443

Robinson Racing 1030 Hard Nickel Plated Steel Motor Pinion Gear, 1/8" Bore, 48 Pitch, 30 Tooth

Robinson Racing 1030 Hard Nickel Plated Steel Motor

The 48 pitch hard nickel plated alloy steel pinions are precision cut gears that last and last when used with a plastic spur gear. In sizes 12 through 40 teeth. Pinions stamped with tooth number. The bright nickel finish protects the steel from corrosion and increases lubricity of the gear by reducing friction and adhesion between the pinion and spur gear. 1/8 inch bore. One 5-40 set Screw included. 1/16 inch Allen wrench (not included) Fits the 5/40 set screw.

  • Color: Brown/a
  • Brand: Robinson Racing Products
  • ASIN: B0006O7U0I
  • UPC: 719696010308

Robinson Racing 1410 Extra Hard Wide 48 Pitch 10 Tooth 1/8" Shaft Pinion Gear with Collar

Robinson Racing 1410 Extra Hard Wide 48 Pitch

The Robinson Racing Products team is dedicated to producing the finest gears and high-performance drive-related accessories available, from HARD-CORE racer to Week-End Warrior, we have you covered. All of our products are precision manufactured in the U.S.A. And have been proven on the track, off-road, and in countless back-yards so you can depend on them when it counts for maximum performance and maximum fun. We back up our confidence with more than 30 years of experience in manufacturing and racing hi-performance RC products.

  • Color: Brown/a
  • Brand: Robinson Racing Products
  • ASIN: B01N55CLH1
  • UPC: 719696014108

Hot Racing HAG813 13t 48p Hard Anodized Aluminum Pinion Gear

Hot Racing HAG813 13t 48p Hard Anodized Aluminum

This is a 13 tooth, 48 pitch Hard Anodized aluminum pinion gear from Hot Racing. FEATURES: 6061 Aluminum ConstructionShort ShankCNC Precision MachinedStamped w/number of teeth for easy identificationBeveled teeth edgeYOU WILL RECEIVE: One pinion gearOne pinion 3mm set screwREQUIREMENTS: Allen wrench or ball driver for mounting. SPECIFICATIONS: Teeth count: 13 teethTeeth pitch: 48 pitchwidth: 9.7mm (0.38")Inner diameter: 3.2mm (.125")COMMENTS: Can be used in most applications where a 48pitch pinion recommended. Hard Anodizing or Hardcoat is an electrochemically produced grey layer of hard aluminum oxide on the surface of aluminum components description revised by: DB October 31, 2012

  • Brand: Hot Racing
  • ASIN: B00A1E7RQ0
  • UPC: 083745601763

Robinson Racing Products 8724 Hard Bore 0.8 Module Pinion Gear 24T, 5mm

Robinson Racing Products 8724 Hard Bore 0.8 Module

HARD 5MM BORE(.8) PINION 24T

  • Brand: Robinson Racing Products
  • ASIN: B0019OHK9U
  • UPC: 736126895496
Similar Hard Pinion Gear Shopping Results