COMP Cams 7914-16 Hi-Tech 5/16" Diameter 7.850" Length Pushrod for Chrysler 5.7L Hemi - 8 Piece, (Set of 2)

COMP Cams 7914-16 Hi-Tech 5/16" Diameter 7.850" Length

The pushrod is one of the most important pieces of the valve train. Pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the parts in the valve train, as well as the RPM at which the engine will be run. Hi-Tech Pushrods feature a one-piece design from 0.080 inch wall, seamless chromemoly tubing that ensures the ultimate in strength and durability. Ends are precision formed, yielding added thickness and strength in the critical tip area, while maintaining constant wall thickness and concentricity. The pushrods are then heat treated for maximum strength to ensure compatibility with guide plates. They are OD ground for consistency and black oxide finished with length and part number laser etched on the OD for ease of identification.

  • Brand: Comp Cams
  • ASIN: B001G9HR00
  • UPC: 036584117650

Remanufactured OEM Connecting Rod compatible with 1993-2014 5.7L Chrysler Dodge Jeep Hemi engines

Remanufactured OEM Connecting Rod compatible with 1993-2014 5.7L

This listing is for a single 2003 - 2014 Dodge Hemi 5.7L Reconditioned Connecting Rod. All remanufactured connecting rods are OEM-parts which have been reconditioned to aftermarket specifications. Reconditioned connecting rods have been cleaned and inspected with the small and big ends machined back to OE-size; unless otherwise noted. Connecting rod bolts are only replaced when necessary.

  • Brand: IE PARTS GROUP
  • ASIN: B07J5PQSPZ

COMP Cams 7974-8 Hi-Tech 5/16" Diameter 7.850" Length Intake Pushrod for Chrysler 5.7L Hemi, (Set of 8)

COMP Cams 7974-8 Hi-Tech 5/16" Diameter 7.850" Length

The pushrod is one of the most important pieces of the valve train. Pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the parts in the valve train, as well as the RPM at which the engine will be run. Hi-Tech Pushrods feature a one-piece design from 0.080 inch wall, seamless chromemoly tubing that ensures the ultimate in strength and durability. Ends are precision formed, yielding added thickness and strength in the critical tip area, while maintaining constant wall thickness and concentricity. The pushrods are then heat treated for maximum strength to ensure compatibility with guide plates. They are OD ground for consistency and black oxide finished with length and part number laser etched on the OD for ease of identification.

  • Brand: Comp Cams
  • ASIN: B0091QZUW2
  • UPC: 036584206712

Manton Pushrods 3 Piece Billet 5.7L/6.4L Gen3 Hemi Pushrods - Drop In 3/8 Diameter x .095 Wall

Manton Pushrods 3 Piece Billet 5.7L/6.4L Gen3 Hemi

1 Set of 16 - 3/8 Diameter By .095 Wall Thickness -Billet 8620 steel Tip End -4130 Chromoly Tubing To provide increased pushrod column strength and valve train stability, we developed a 3/8 Drop in "3 Piece" pushrod. Our pushrods are manufactured with 4130/4135 seamless Chromoly tubing with a variety of heat treating conditions and wall thickness' available, all coming standard with our billet steel tip ends. These tips have been CNC machined from 86L20 bar stock that is then core hardened and triple tempered , providing increased impact and wear resistance. This combination of materials and heat treatment procedures will extend the service life of the pushrod, while improving overall performance of your valve train. Our versatility in engineering and design allows us to manufacture a product that will enhance the specific combination of your engine. When we sit down to engineer a pushrod, we always try to fit the largest diameter pushrod we can, within the space available. With the window we have to work in, the stock 5/16 diameter is Not the largest diameter pushrod that will drop right in without any modifications. However, by increasing the diameter of the tubing from the stock 5/16 to 3/8, we can spread the load over a larger surface area without causing the pushrods to bind...

  • Brand: Manton Pushrods
  • ASIN: B01FQC1CSK

OMB Warehouse (2) Stainless Steel Push Rod GX200 Clone BSP Predator 212 Non-hemi

OMB Warehouse (2) Stainless Steel Push Rod GX200

At OMB Warehouse, we strive to provide the greatest selection and quality of parts for your outdoor power equipment.Need other parts to complete your project? Check out our huge catalog - we have what you need.New Stainless Steel Pushrods for the BSP/Clone/GX200/ non-hemi Predator Engines. Stock Length. Price is for 2 pushrods

  • Brand: OMB Warehouse
  • ASIN: B07BHYRD52
  • UPC: 654329061701

COMP Cams 7769-8 Hi-Tech 5/16" Diameter 6.600" Length Exhaust Pushrod for Chrysler 5.7L Hemi, (Set of 8)

COMP Cams 7769-8 Hi-Tech 5/16" Diameter 6.600" Length

The pushrod is one of the most important pieces of the valve train. Pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the parts in the valve train, as well as the RPM at which the engine will be run. Hi-Tech Pushrods feature a one-piece design from 0.080 inch wall, seamless chromemoly tubing that ensures the ultimate in strength and durability. Ends are precision formed, yielding added thickness and strength in the critical tip area, while maintaining constant wall thickness and concentricity. The pushrods are then heat treated for maximum strength to ensure compatibility with guide plates. They are OD ground for consistency and black oxide finished with length and part number laser etched on the OD for ease of identification.

  • Brand: Comp Cams
  • ASIN: B0091QYP1E
  • UPC: 036584206729

Clevite CB1808P50MM(8) Con Rod Bearing Set (Chrysler V8 5.7L 6.1L 6.4L Hemi)

Clevite CB1808P50MM(8) Con Rod Bearing Set (Chrysler V8

Clevite Chrysler V8 5.7L 6.1L 6.4L Hemi Con Rod Bearing Set

  • Brand: Clevite 77
  • ASIN: B004A2ATWI

Plymouth Hemi 'Cuda & Dodge Hemi Challenger

Plymouth Hemi 'Cuda & Dodge Hemi

  • ASIN: B01JHJ5H4I

RWD Models - 16pc Kit - Front: All (6) Upper & Lower Control Arms, Ball Joints, Inner & Outer Tie Rods & boots, Sway bar for 2005-2010 Chrysler 300, Dodge Charger Challenger Magnum RWD

RWD Models - 16pc Kit - Front: All

COMPLETE 16pc Front Suspension Kit Front: All (6) Upper & Lower Control Arms, All (6) Ball Joints, All (6) Inner & Outer Tie Rods & boots, 2 Sway bar - 80015-14A-DA Fitment: RWD Models Only 2005-10 Chrysler 300 RWD 2005-08 Dodge Magnum RWD 2006-10 Dodge Charger RWD 2008-10 Dodge Challenger RWD Detroit Axle is a leading supplier of ride control products to OE vehicle manufacturers Nationwide, that expertise translates to Detroit Axle's OE-quality Aftermarket.

  • Brand: Detroit Axle
  • ASIN: B01D5AH8VU
  • UPC: 683318059924

Liberty Classics 84035 Orange and Silver Chrome 5 Inch x 6 Inch x 7 Inch 1: 6 Engine - Chevrolet Blown Hot Rod

Liberty Classics 84035 Orange and Silver Chrome 5

Bring on home this amazing collection. These are true-to-scale null die cast cars with an amazing detailed finish. The models are made with top quality materials made to last. All Car models are authentic licensed products. Enjoy this null in your collection

  • Color: Orange and Silver Chrome
  • Brand: Liberty Classics
  • ASIN: B00GBU43LA
  • UPC: 739611840353
Similar Hemi Rod Shopping Results