FITECH 30003 GO STREET EFI CAST FINISH

FITECH 30003 GO STREET EFI CAST

Go Street EFI - 400 HP System The Game Changer has arrived from FiTech with its latest addition to the line of Go EFI Throttle Body EFI systems. FiTech recognizes that not everyone needs or has 600HP or a wild camshaft. There is a large group of enthusiasts who are happy with their ZZ4 crate engine or their '66 Mustang's factory engine, but still want the advantage that EFI has to deliver. Fitech has taken your needs into consideration and built an EFI designed just for that purpose. The Go Street EFI is a ready-to-run system that strays away from the programmable features and sticks to the basic functions necessary to get the best performance and economy out of your street and mild performance engine. FiTech once again allows you to ditch that old carburetor and advance into the EFI world at the most affordable price on the planet! Leave it to the experts in affordable EFI, we are always looking for ways to save our customers money while delivering the BEST performance possible! 30003 Kit Contents Die Cast Throttle Body Handheld Controller Windshield Mount FiTech flow matched 62-lb injectors Built-in pressure regulator 2.5 BAR Internal MAP Sensor Throttle Position Sensor Idle Air Control Coolant Temp Sensor Wide band O2 Sensor O2 Bung Kit -06AN Fuel Inlet Fitting ...

  • Brand: FI-TECH
  • ASIN: B01LX3FUB8
  • UPC: 856291005350

FiTech 30002 Fuel Injection System

FiTech 30002 Fuel Injection

FiTech manufactures throttle body-style EFI systems. These self-tuning EFI systems are designed to be a simple and affordable solution for converting carbureted engines to fuel injection, as well as ground up or upgrade applications. In addition to complete EFI systems, FiTech also offers fuel system components such as fuel pumps, filters, lines, and more.

  • Brand: FI-TECH
  • ASIN: B019XF4GZC
  • UPC: 856291005015

K&N 20-0001 Electronic Carburetor Injection Kit for 4150 Style Carburetors

K&N 20-0001 Electronic Carburetor Injection Kit for 4150

The K&N 20-0001 Electronic Carburetor Injection (ECI) system is the solution to every day carburetor issues. Using an included wideband O2 sensor, the system reads the air/fuel ratio in the exhaust and adds fuel if a lean condition is detected. Say goodbye to cold start issues, pumping the gas, priming, and flooding. It will also help support carburetors that have issues during idle and off-throttle conditions. The kit comes with the ECI carburetor plate, fuel block with fuel injector, weatherproof ECU, wire harness, O2 sensor, and all the gaskets and hardware required for install. Thanks to its supplemental design, the system installs with your current carburetor setup. Installation can be completed in a few hours with common tools. The K&N ECI system is also great for drag racers who race carbureted engines. It is compatible with all fuel types, including E85. It is an ideal solution for marine applications, as the ECU is weatherproof and can be mounted just about anywhere. Say goodbye to headaches associated with carbs and don't worry about switching to EFI. The K&N 20-0001 fits Holley 4150 style carburetors.

  • Brand: K&N
  • ASIN: B07D9DH2TN
  • UPC: 024844367792

Tecmate CarbMate, TS-110, Carburetor/Fuel Injection Throttle Body Synchronizer

Tecmate CarbMate, TS-110, Carburetor/Fuel Injection Throttle Body

CarbMate, the cost-effective electronic replacement for mercury sticks, with the advantage of solid state electronic measurement that does not break if you drop it. CarbMate displays the difference in vacuum intake settings of two separate carburetors (or fuel injection throttle valves) on the same engine very precisely on a single transverse "East-West" 9 fixed resolution LED display.

  • Brand: Tecmate
  • ASIN: B0719HL34V

Fuel Injector Cleaner Complete System Cleaning Fluid Additive for Carburetor Engine Gas Line & More. Works with Car, Lawn Mower to Increase Power, Efficiency and Economy Boosting Stabilizer. 104+

Fuel Injector Cleaner Complete System Cleaning Fluid Additive

Fuel Injector Pro by 104+ is a complete fuel system cleaner, designed and formulated with engine cleaning agents that will clean engine carbon deposits, fuel injectors, intake valves and combustion chambers to increase acceleration, and restore that lost power. This best in class Fuel Injector Pro is formulated to work on today's modern high combustible (GDI, DFI) engines but also will work on traditional engines / motors. What's GDI & and Why use Fuel Injector Pro? Gasoline Direct Injection is a growing trend in automobiles and a continuing rise of GDI engines in cars will soon overpower traditional engines. What does this mean to you? First, lets get scientific and explain in simple terms what a GDI engine is and does. Every engine has intake valves, also known as cylinders. These cylinders are what cause your car to run. Each cylinder has a combustion chamber which is where pressurized gasoline, via a fuel line, is injected. In gasoline direct injection engines, the fuel injector is positioned directly into the combustion chamber. So what does this all mean? Ultimately it means better engine performance. But this better performance comes at a big price. That big price is in the form of carbon deposits. And not just any carbon deposits. We're talking heavy, caked-on deposits th...

  • Brand: 104 + OCTANE BOOST
  • ASIN: B06XS62VL7

Chevron Techron Concentrate Plus Fuel System Cleaner - 20 oz.

Chevron Techron Concentrate Plus Fuel System Cleaner -

Chevron Techron fuel system cleaner is unbeatable in cleaning the entire fuel system and restoring lost power and performance caused by deposit build-up. - Cleans deposits from fuel injectors, carburetors, ports, valves and combustion chambers- works in one tankful while you drive to reduce deposit related engine knock, ping, run-on, and cold start problems- recommended for use every 3,000 miles- 20 oz. bottle.

  • Color: 20 OZ
  • Brand: Chevron
  • ASIN: B00092893E
  • UPC: 023968657406

Holley 550510 Electronic Fuel Injection

Holley 550510 Electronic Fuel

Holley just brought EFI within range! Introducing Sniper EFI! It's economically priced so you can have all the benefits of EFI and still have money to finish or upgrade the rest of your ride! Perfect for street rods, muscle cars, off road trucks or nearly any carbureted vehicle. Put an end to cold start issues, hesitations, vapor lock, and flooding. Upgrade to Sniper EFI and get the tactical accuracy of EFI today

  • Brand: Holley
  • ASIN: B01BXH3QU4
  • UPC: 090127728994

FAST 30227-06KIT EZ-EFI Master Line Fuel Pump Kit

FAST 30227-06KIT EZ-EFI Master Line Fuel Pump

The next generation of the world's simplest self tuning fuel injection system is here. Designed for all applications making up to 650 horsepower, the EZ-EFI Fuel system easily bolts onto any carburised or multi-port application in a single afternoon, making it the easiest EFI system you will ever install. Simply hook up the system, answer the questions from the improved Setup Wizard on the color touchscreen hand-held unit, and the system will tune itself as you drive. The hand-held includes a variety of display dashes, a clean and easy to use interface and an LED indicator that can alert users to any errors (including overheating) or be used as a shift light. An updated wiring harness features a premium loom, added protective fuses and a streamlined design, while the ECU hardware has been updated to provide added protection against electrical/ignition noise and hardware damage. FAST EZ-EFI Fuel now features a die cast and black powder-coated four-injector throttle body with integrated fuel rails. It provides even better fuel distribution and more airflow than the original, and NO manifold replacement is needed. In addition to matching any 4150-style carburised manifold, the EZ-EFI Fuel Self Tuning Fuel Injection System also works with your original carb-style throttle linkage and...

  • Brand: FAST
  • ASIN: B016V2BB3U
  • UPC: 191215047475

Pingel Tank Fitting Kit for Fuel-Injection to Carburetor Conversion 62052

Pingel Tank Fitting Kit for Fuel-Injection to Carburetor

• Use when converting from OEM fuel-injection systems to use a carburetor in order to deliver adequate fuel for large-displacement engines• Replaces factory tank fittings, allowing the use of a high-quality, high-flow Pingel fuel valve to feed the carburetor• Made of stainless steel• Includes adapter and plug• Magneti Marelli 1995-2001 H-D models tank fitting kit (uses Pingel 22mm valve)

  • Brand: Pingel
  • ASIN: B000GTW7TC
  • UPC: 115971670814

STP Fuel Injector & Carburetor Treatment + Upper Cylinder Lubricant (5.25 fl. oz.) (pack of 2)

STP Fuel Injector & Carburetor Treatment + Upper

Want to maximize fuel efficiency and avoid problems such as rough idling, weak acceleration, stumbling and stalling? STP fuel additive products can help. Our redesigned fuel additive bottles are compatible with cap-less fuel tanks. Without cleaning, deposits can lead to hard starts, lost acceleration and rough idling. STP Fuel Injector & Carburetor Treatment + Upper Cylinder Lubricant is specially formulated to maintain clean performance of fuel injectors and carburetors by helping to prevent the accumulation of deposits. It’s made with jet fuel, a high-quality carrier of active ingredients.

  • Brand: STP
  • ASIN: B00OIRU4CA
  • UPC: 071153786103

STP 78577 Bottles Super Concentrated Fuel Injector Cleaner (5.25 fl. oz.) (2 Pack)

STP 78577 Bottles Super Concentrated Fuel Injector Cleaner

STP Super Concentrated Fuel Injector Cleaner contains concentrated detergents that help dissolve and remove harmful carbon, gum, and varnish deposits on fuel injectors. Without cleaning, deposits can lead to hard starts, lost acceleration and rough idling. This product is made with jet fuel, a high-quality carrier of active ingredients.

  • Brand: STP
  • ASIN: B0053ODFZU
  • UPC: 071153785779

STP Ultra 5-in-1 Fuel System Cleaner and Fuel Stabilizer (12 fl. oz.)

STP Ultra 5-in-1 Fuel System Cleaner and Fuel

STP Ultra 5-in-1 Fuel System Cleaner and Fuel Stabilizer is scientifically engineered using advanced cleaning technology to keep all your engines running in top form. It contains 3X the amount of cleaning agents vs the leading premium gasoline to remove an average of 61%** of harmful intake valve deposits and restore an average of 95%*** of the original injector performance. This product also contains fuel stabilizer to help keep fuel fresh during storage. Compatible with gasoline engines (2&4 stroke), inclusive of boats, motorcycles, and lawnmowers. *One bottle contains 3X by weight the amount of cleaning agents compared to 20 gallons of the leading premium gasoline. **Average result of 6 modified ASTM D5500 and D6201 tests. ***Results based on ASTM D5598

  • Brand: STP
  • ASIN: B00K5L8H1I
  • UPC: 071153174375

Red Line (60103) Complete SI-1 Fuel System Cleaner - 15 Ounce

Red Line (60103) Complete SI-1 Fuel System Cleaner

Concentrated, detergent-based fuel additive cleans injectors, carburetors, valves and combustion chamber deposits with a concentrated blend of the most powerful high-temp and low-temp detergents available.

  • Brand: Red Line
  • ASIN: B000CPI5Z0
  • UPC: 083522601030

Fitech Fuel Injection Go Street EFI System Master Kit w/ Inline Fuel Pump - 31003

Fitech Fuel Injection Go Street EFI System Master

The Game Changer has arrived from FiTech with its latest addition to the line of Go EFI Throttle Body EFI systems. FiTech recognizes that not everyone needs or has 600HP or a wild camshaft. There is a large group of enthusiasts who are happy with their ZZ4 crate engine or their '66 Mustang's factory engine, but still want the advantage that EFI has to deliver. Fitech has taken your needs into consideration and built an EFI designed just for that purpose. The Go Street EFI is a ready-to-run system that strays away from the programmable features and sticks to the basic functions necessary to get the best performance and economy out of your street and mild performance engine. FiTech once again allows you to ditch that old carburetor and advance into the EFI world at the most affordable price on the planet! Leave it to the experts in affordable EFI, we are always looking for ways to save our customers money while delivering the BEST performance possible! The Fuel Delivery Kit includes an EFI grade 255 L/PH inline external fuel pump that is suitable for engines making up to 600 HP. (Note that some of our EFI kits are limited to less than 750 HP due to maximum usable injector sizes). This kit also includes 20-feet of EFI grade fuel hose suitable for both the inlet and return lines be...

  • Color: Silver
  • Brand: FI-TECH
  • ASIN: B06W2NB5T8
  • UPC: 854549007026

Deluxe Carburetor Airflow Meter

Deluxe Carburetor Airflow

Latest Rage 000124 Universal Pro-Sync Carburetor Synchronizer Tool. Ideal For Fine Tuning Dual Carburetors On Dune Buggies, VW Bugs, Karmann Ghia, VW Bus, Motorcycle Trikes. Pro-Sync Is A Precision Instrument That Provides A Visual Method Of Balancing The Performance Of Each Carburetor In Multiple Carb Set-Ups With A High Degree Of Accuracy. This Multiple Carburetor Synchronizer Works With Side Draft Or Down Draft Carburetors. The Pro-Synchronizer Will Not Restrict Airflow And Feature An Easy To Read 1-30 Kg/H Numbered Scale For Precise Synchronization.

  • Brand: Latest Rage
  • ASIN: B00CMC57R0
  • UPC: 759173631817

Holley: Carburetors, Manifolds & Fuel Injection (HP1052)

Holley: Carburetors, Manifolds & Fuel Injection

Now revised and completely updated, Holly Carburetors, Manifolds & Fuel Injection gives you the inside edge on how to use Holley products for maximum performance or economy.   Comprehensive sections include: Carburetion basics & Holley operation; selecting and installing the “right” carburetor and manifold; theory, operation, and installation of Pro-Jection fuel injection; tuning for maximum performance; designating a fuel system; alcohol modifications; troubleshooting and repair, and more!   Over 500 photos, illustrations, charts and diagrams guide you through principles of induction that can be applied to any engine. Included are street, drag strip, road racing, circle track and marine applications.

  • Brand: HP Books
  • ASIN: 1557880522
  • UPC: 075478010523

Holley HOL 12-804 12-804 Fuel Pressure Regulator

Holley HOL 12-804 12-804 Fuel Pressure

This regulator is used to adjust to fuel pressure requirements of various carburetors and supplies the proper pressure to the needle and seat valve to prevent flooding or drivability problems. This satin finish regulator feature 3/8 pipe thread outlet ports with 7/32" restriction. It regulates pressure from 1 to 4 PSI and is designed to work with a single carburetor installation.

  • Color: Shiny
  • Brand: Holley
  • ASIN: B00029JC6M
  • UPC: 090127020234

Mr. Gasket 3710 Carburetor Heat Shield

Mr. Gasket 3710 Carburetor Heat

Mr. Gasket Carburetor Heat Shield will help eliminate fuel boiling and vapor lock caused by heat conducted from the manifold to the carburetor. The height of this heat shield is 1/2".

  • Brand: Mr. Gasket
  • ASIN: B000BW8VUS
  • UPC: 084041037102

Tillotson Carburetor for Honda Engines GX160, GX200 Genuine with Choke Lever ...

Tillotson Carburetor for Honda Engines GX160, GX200 Genuine

Lower Emissions - Lower Fuel Consumption - Improved Acceleration Enhanced Engine Life - Easier Startability - More Stable Power Under Load Drop in Replacement on Hondas and Clones Available in Adjustable and Fixed Jet versions EPA approved.

  • Brand: Tillotson
  • ASIN: B01F9JHK4A
  • UPC: 645380977902

Pingel Tank Adapter for Fuel-Injection to Carburetor Conversion 62071

Pingel Tank Adapter for Fuel-Injection to Carburetor Conversion

• Use when converting from OEM fuel-injection systems to use a carburetor in order to deliver adequate fuel for large-displacement engines• Replaces factory tank fittings, allowing the use of a high-quality, high-flow Pingel fuel valve to feed the carburetor• Made of stainless steel• Includes adapter only• Delphi H-D models adapter fitting Only, no plug (uses 22mm valve)

  • Brand: Pingel
  • ASIN: B000VVWDPS
  • UPC: 748264501115
Similar Injection Carburetor Shopping Results