Performance Air Intake for 91-94 Ford Ranger , Explorer 4.0 4.0L V6 Engine (BLACK)

Performance Air Intake for 91-94 Ford Ranger ,

  • Color: Black
  • Brand: INTAKE KAI
  • ASIN: B06XHZCZXG
  • UPC: 752082784773

Ford air intake hose 1992-1994 Ford Explorer/Ranger 4.0 v6

Ford air intake hose 1992-1994 Ford Explorer/Ranger 4.0

Air intake tube that runs from air cleaner to intake

  • Brand: Ford
  • ASIN: B0087QIFII

APDTY 022017 IMRC Intake Manifold Runner Solenoid Control Valve Fits 2001-2011 Ford Ranger 2.3L (Ford Name: Control Assy Engine Air Shut Off; Replaces 1S7Z-9J559-AA, 1S7Z9J559AA)

APDTY 022017 IMRC Intake Manifold Runner Solenoid Control

Brand New IMRC Intake Manifold Runner Control SolenoidFits 2001-2011 Ford Ranger 2.3LThe factory original part is very common to fail after several years of normal use. Typically a DTC (Diagnostic Trouble Code) can set and the codes can be P2004, P2005, P1518, P1537. Replacing this part and verifying all vacuum lines are in good working order is most common repair for these trouble codes.Replaces Ford Part #: 1S7Z9J559AA, 1S7Z9J559A

  • Color: Metal
  • Brand: APDTY
  • ASIN: B00GZW558E
  • UPC: 401000186051

Air Intake Outlet Duct Tube Hose & Clamps Air Intake Hose For Ford Ranger 1998-2003 1L5Z-9B659-BA

Air Intake Outlet Duct Tube Hose & Clamps

Manufacturer Part Number: 1L5Z-9B659-BA Fits for Ford Ranger 1998-2003 3.0L V6.

  • Brand: Anxingo
  • ASIN: B07K9LCGPZ
  • UPC: 743815105682

aFe Power FULL METAL Power F2-03013 Ford Ranger Performance Air Intake System (Dry, 3-Layer Filter) by aFe

aFe Power FULL METAL Power F2-03013 Ford Ranger

This FULL METAL Power Stage 2 cold air intake system produces 17HP and 21lbs. x ft. of torque and outflows the factory intake by 29%. Enclosed in the durable 18-Gauge, black powder-coated heat shield is an oil-free washable/reusable conical air filter that improves airflow for increased horsepower and torque. This intake system also features a 3-angle adaptor and a gun metal grey powder coated aluminum tube that replaces the stock intake tract and directs increased airflow with improved volumetric efficiency for maximum performance. This system mounts to the lower half of the factory air box.

  • Brand: aFe
  • ASIN: B01B3OWAQ8
  • UPC: 771395609429

K&N 57-2561 FIPK Performance Air Intake System

K&N 57-2561 FIPK Performance Air Intake

The Generation II FIPK is K&N's ultimate performance product, designed to increase power by as much as 10%. Most FIPKs are street legal in all 50 U.S. states and come with a million-mile limited warranty.

  • Brand: K&N
  • ASIN: B000JZDU7G
  • UPC: 024844109156

ST Racing Black Short Ram Air Intake Kit + Filter 98-01 Ford Ranger with 2.5L L4

ST Racing Black Short Ram Air Intake Kit

T-306 Aluminum High Quality Finished Intake pipe as shown in the picture High quality built Washable and Reusable Air Filter as shown in the picture All necessary mounting hardwares, vacuum hoses and reducers will be included like shown in the picture MAF sensor adapter (This will be included only if your car needs one for installation, some cars may not need it) A General Installation instruction will be included, but if you need more help, email us and we'll gladly to help

  • Color: Black
  • Brand: S & T RACING INC
  • ASIN: B07DRGC8SM
  • UPC: 705377477089

Performance Air Intake for 1986-1990 FORD BRONCO II / 1986-1992 FORD RANGER 2.9L V6 OHV ENGINE (BLUE)

Performance Air Intake for 1986-1990 FORD BRONCO II

  • Color: Blue
  • Brand: INTAKE KAI
  • ASIN: B079JCQP6F
  • UPC: 752082783851

K&N 57-2533 FIPK Performance Air Intake System

K&N 57-2533 FIPK Performance Air Intake

The kit replaces your vehicle's restrictive factory air filter and air intake housing. K&N intake systems are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your vehicle's engine to inhale a larger volume of air than the OEM air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The filters on these kits are washable, reusable and easy to install with tools commonly available.

  • Brand: K&N
  • ASIN: B000BR3BJ4
  • UPC: 024844100283

Ford 1L5Z-9B659-BA - HOSE - AIR

Ford 1L5Z-9B659-BA - HOSE -

Air Intake Snorkel Inlet Outlet Duct

  • Brand: Ford
  • ASIN: B000NSAAWC
  • UPC: 638827774868

Vincos Full Gasket Set HS9081PT-1 Fits For 1997-2000 FORD EXPLORER 4.0L 1997-2000 FORD RANGER 4.0L 1997-2000 MAZDA B4000 4.0L 1997 FORD AEROSTAR 4.0L

Vincos Full Gasket Set HS9081PT-1 Fits For 1997-2000

Brand New & OE. Quality Full Gasket Set fits : 1997 FORD AEROSTAR 4.0L 244CID OHV V6 12V VIN "X" 1997-2000 FORD EXPLORER 4.0L 244CID OHV V6 12V VIN "X" 1997-2000 FORD RANGER 4.0L 244CID OHV V6 12V VIN "X" 1997-2000 MAZDA B4000 4.0L 244CID OHV V6 12V VIN "X" Package includes: Graphite head gasket Intake manifold gasket Exhaust manifold gasket Valve cover gasket Viton valve stem seals Camshaft seal O-rings Other small gaskets Gasket silicone sealant Feature: State of the art manufacturing to OE specifications for a precise fit Engineered from premium materials to provide exceptional service life and reliability Designed to withstand the harsh conditions in the modern engine compartment Note: Parts in kit please please refer to the listing pictures in description.

  • Brand: Vincos
  • ASIN: B01N9E3LKJ

GooDeal 1S7Z9J559AA Intake Manifold Runner Control for 2001-2011 Ford Ranger 2.3L

GooDeal 1S7Z9J559AA Intake Manifold Runner Control for 2001-2011

Fits for 2001-2011 2.3L Ford Ranger. Package include: 1pcs Intake Manifold Runner Control

  • Brand: GooDeal
  • ASIN: B00Z5UM10W
  • UPC: 710328210943

Fel-Pro MS98006T Intake Manifold Gasket Se

Fel-Pro MS98006T Intake Manifold Gasket

Fel-Pro gaskets offers 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

  • Brand: Fel-Pro
  • ASIN: B000HUKBI4
  • UPC: 614046841666

RL Concepts Blue Short Ram Air Intake Kit + Filter 95-00 Ford Explorer Ranger All Model with 4.0L OHV V6 Engine

RL Concepts Blue Short Ram Air Intake Kit

T-306 Aluminum High Quality Finished Intake pipe as shown in the picture High quality built Washable and Reusable Air Filter as shown in the picture All necessary mounting hardwares, vacuum hoses and reducers will be included like shown in the picture MAF sensor adapter (This will be included only if your car needs one for installation, some cars may not need it) A General Installation instruction will be included, but if you need more help, email us and we'll gladly to help

  • Color: Blue
  • Brand: R&L Racing
  • ASIN: B074S8YFR3
  • UPC: 653451771588

Hot Water Connection Elbow BRAND NEW OEM

Hot Water Connection Elbow BRAND NEW

Intake Manifold Hot Water Connection Elbow For Sensor

  • Brand: Ford
  • ASIN: B00AQZBC42

SCT Performance - 7015 - X4 Performance Tuner - Custom Power Flash Programmer- Ford

SCT Performance - 7015 - X4 Performance Tuner

The X4 Power Flash arrives Pre-Loaded with DYNO Proven tune files that INCREASE HORSEPOWER and TORQUE! Programming your vehicle with one of SCT's pre-loaded performance or fuel economy tune files is as easy as 1-2-3. Simply plug the OBDII connector into your vehicle's OBDII port, select the pre-loaded tune file using the simple to navigate menu and within minutes the X4 programs your vehicle.

  • Color: Black
  • Brand: SCT
  • ASIN: B00J262R9A
  • UPC: 798334649469

Spec-D Tuning AFC-EPOR01V6BL-AY Ford Ranger Explorer Sport Trac 4.0L Cold Air Intake Blue Filter Kit

Spec-D Tuning AFC-EPOR01V6BL-AY Ford Ranger Explorer Sport Trac

Brand new in original packaging. Exactly the same as shown in the picture! Comes one set of cold air intake. Pipes made of high quality aluminum with chrome finished. Built air filter diffuser blades that direct air inward, increase the amount and speed of the air flow going in to engine. Help engine to draw more cold air resulting in better throttle response and higher explosive horsepower output. Increase horsepower, torque and improve the gas mileage. Kit includes: aluminum Intake pipes, rubber base air filter, vacuum hoses, reducers and all necessary mounting hardware. Professional installation highly recommended. Fitment : 01-03 Ford Ranger 4.0L V6 SOHC engine models only. 01-03 Ford Explorer 4.0L V6 SOHC engine models only. 01-03 Ford Explorer Sport Trac 4.0L V6 SOHC engine models ony. 01-03 Mazda B4000 4.0L V6 SOHC engine models only.

  • Brand: Spec-D Tuning
  • ASIN: B00U6GALXE
  • UPC: 841808114403

LIMICAR Cylinder Head Gasket Set with Head Bolts For 1998 1999 2000 2001 Ford Ranger Mazda B3000 3.0L V6 HS9902PT ES72174

LIMICAR Cylinder Head Gasket Set with Head Bolts

LIMICAR is one of the largest manufacturer in the automotive parts aftermarket. LIMICAR is featured with advanced technology to meet OE specifications to offer a full range of auto products to cover a variety of applications and repair needs. Fitment Information: 1999-2001 Ford Ranger 3.0L 182Cid V6 Flex OHV Spec Note:(12 Valve) Vin Code "V" 1998-2001 Ford Ranger 3.0L 182Cid V6 OHV Spec Note:(12 Valve) Vin Code "U" - Fits From 07/14/1998 1999-2001 Mazda B3000 3.0L 182Cid V6 Flex OHV Spec Note:(12 Valve) Vin Code "V" 1998-2001 Mazda B3000 3.0L 182Cid V6 OHV Spec Note:(12 Valve) Vin Code "U" - Fits From 07/14/1998 2001 Mazda B3000 3.0L 2954Cc V6 OHV Spec Note:(12 Valve) Vin Code "U" Product Features: LIMICAR is designed to withstand the harsh conditions in the modern engine compartment. It does not come with any installation instructions. If you do not have a service manual, please consult a professional mechanic prior to installing this kit. OEM Part Number: HS9902PT, HS9902PT-3, HS9902PT-4, ES72174 Crossreference Part#: HS8-21400, HB21505 Package Included: Graphite head gasket Intake manifold gasket Exhaust manifold gasket Valve cover gasket Viton valve stem seals Camshaft front O-rings Other Small Gaskets 16x Head Bolts

  • Brand: LIMICAR
  • ASIN: B07DBL5C2J

DNJ IG448 Intake Gasket for 1995-2001 / Ford, Mazda / B2300, B2500, Ranger / 2.3L, 2.5L / SOHC / L4 / 8V / 140cid, 153cid, 2295cc, 2492cc

DNJ IG448 Intake Gasket for 1995-2001 / Ford,

DNJ ENGINE COMPONENTS, with over 20 years of experience, has become a full line provider of Domestic & Japanese engine parts for all cars and trucks and offers listings of all engines.DNJ ENGINE COMPONENTS is proudly associated with manufacturers who are certified with ISO9001, ISO9002, and with the prestigious QS9000 certificate. All DNJ, Engine Components meet or exceed O.E. Quality. Worldwide proven quality parts.

  • Brand: DNJ ENGINE COMPONENTS
  • ASIN: B00TM15DI2
  • UPC: 849500026826

Cylinder Head Gasket Set HS9293PT-2 Fits for 2000-2003 Ford Explorer Ranger Mazda 4.0 VIN E K

Cylinder Head Gasket Set HS9293PT-2 Fits for 2000-2003

Fits Ford 4.0L 245ci (4015cc) SOHC V6 (12 Valve) 100.4mm Bore, VIN Codes "E" "K" (8th digit of VIN) 2001-2003 2001-2003 Ford Explorer 4.0L SOHC 12 Valve V6 VIN Codes E, K 2001-2003 Ford Explorer Sport Trac 4.0L SOHC 12 Valve V6 VIN Codes E, K 2001-2003 Ford Ranger 4.0L SOHC 12 Valve V6 VIN Code E 2002-2003 Mercury Mountaineer 4.0L SOHC 12 Valve V6 VIN Code E, K 2001-2003 Mazda B4000 4.0L SOHC 12 Valve V6 VIN Code E Package includes: Multi-Layered Steel head gasket? Intake manifold gasket Exhaust manifold gasket? Valve cover gasket Viton valve stem seals? O-rings? Other Small Gaskets

  • Brand: Vincos
  • ASIN: B01HOGJ4SG
  • UPC: 732240757665

HPS Black Shortram Air Intake Kit with Heat Shield for 04-11 Ford Ranger 4.0L V6 Short Ram

HPS Black Shortram Air Intake Kit with Heat

HPS black performance shortram air intake with heat shield [part number 27-611WB] for 2004-2011 Ford Ranger 4.0L V6 offers a free-flowing mandrel-bent aluminum tube cold air induction system designed to improve throttle response and produce dyno proven performance gains +18.3 Whp horsepower, +17.5 Ft/lbs torque while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield blocks out the heat from engine and maximize the cooling effect. The included installation instruction has clear pictures and description to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS performance short ram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps, which ensure the durability and reliability during the extreme driving condition. The included K&N High-Flow conical air filter designed to provide increased surface area and dust capacity. This extra surface area provides even more airflow at lower restriction than a standard replacemen...

  • Color: Black
  • Brand: HPS
  • ASIN: B07DWLMKMX

SCITOO Mass Air Flow Sensor Meter MAF AFLS154 Fit Ford Escape Explorer Sport Trac Focus Mustang Ranger Mazda B2300 B4000 Tribute Mercury Mountaineer Sable 2001

SCITOO Mass Air Flow Sensor Meter MAF AFLS154

OEM Part Number(s):1F2213210R0A, AFLS-154, AJ0313215ACompatibility:1999-2002FORDE-1501999-2002FORDE-2502001-2006FORDESCAPE1999-2003FORDEXPLORER2001-2005FORDEXPLORER SPORT TRAC2001FORDF-1002000-2004FORDFOCUS2001-2004FORDMUSTANG2001-2003FORDRANGER2001FORDSABLE2000-2003FORDTAURUS1999-2002FORDWINDSTAR2001-2004MAZDAB23002004MAZDAB30002001-2003MAZDAB40002001-2006MAZDATRIBUTE2005-2006MERCURYMARINER1999-2005MERCURYMOUNTAINEER2000-2003MERCURYSABLEPackage Included:1 × Air Flow Sensor/MeterHow To Install The Replacement Mass Air Flow Sensor 1. Position MAF sensor in the vehicle. Make sure the airflow direction indicated on the sensor is toward the engine.2. Install sensor-to-air-duct seal(s), if so equipped, on the replacement MAF sensor.3. Connect the MAF sensor to the throttle body air cleaner ducts. If the sensor mounts directly on the throttle body, install and tighten the mounting screws to 10 ft-lb. DO NOT OVERTIGHTEN!4. Position clamps over the air duct/MAF sensor connections and tighten. Replace the clamps if necessary.NOTE: For the MAF sensor to work properly, the sensor/air duct connections must be airtight.5.CAREFULLY plug the harness connector lead into the MAF sensor.

  • Brand: SCITOO
  • ASIN: B077WC7L34

Spec-D Tuning AFC-EPOR01V6RD-AY Ford Ranger Explorer Sport Trac 4.0L Cold Air Intake Red Filter Kit

Spec-D Tuning AFC-EPOR01V6RD-AY Ford Ranger Explorer Sport Trac

Brand new in original packaging. Exactly the same as shown in the picture! Comes one set of cold air intake. Pipes made of high quality aluminum with chrome finished. Built air filter diffuser blades that direct air inward, increase the amount and speed of the air flow going in to engine. Help engine to draw more cold air resulting in better throttle response and higher explosive horsepower output. Increase horsepower, torque and improve the gas mileage. Kit includes: aluminum Intake pipes, rubber base air filter, vacuum hoses, reducers and all necessary mounting hardware. Professional installation highly recommended. Fitment : 01-03 Ford Ranger 4.0L V6 SOHC engine models only. 01-03 Ford Explorer 4.0L V6 SOHC engine models only. 01-03 Ford Explorer Sport Trac 4.0L V6 SOHC engine models ony. 01-03 Mazda B4000 4.0L V6 SOHC engine models only.

  • Color: Polish
  • Brand: Spec-D Tuning
  • ASIN: B00U6GAP9Y
  • UPC: 841808114410

K&N 57-2529-1 FIPK Performance Air Intake System

K&N 57-2529-1 FIPK Performance Air Intake

The kit replaces your vehicle's restrictive factory air filter and air intake housing. K&N intake systems are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your vehicle's engine to inhale a larger volume of air than the OEM air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The filters on these kits are washable, reusable and easy to install with tools commonly available.

  • Brand: K&N
  • ASIN: B000AP1MPC
  • UPC: 024844095060

K&N 57-2535 FIPK Performance Air Intake System

K&N 57-2535 FIPK Performance Air Intake

The kit replaces your vehicle's restrictive factory air filter and air intake housing. K&N intake systems are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your vehicle's engine to inhale a larger volume of air than the OEM air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The filters on these kits are washable, reusable and easy to install with tools commonly available.

  • Brand: K&N
  • ASIN: B000COC1AG
  • UPC: 024844100672

Fits For 1991-2001 Ford Ranger Aerostar Mazda 3.0l Head Gasket Set HS9902PT

Fits For 1991-2001 Ford Ranger Aerostar Mazda 3.0l

Fit 91-97 FORD AEROSTAR3.0L 182CID V6 OHVSpec Note:(12 Valve) VIN Code "U" 99-01 FORD RANGER3.0L 182CID V6 FLEX OHVSpec Note:(12 Valve) VIN Code "V" 91-01 FORD RANGER3.0L 182CID V6 OHVSpec Note:(12 Valve) VIN Code "U" 99-01 MAZDA B3000 3.0L 182CID V6 FLEX OHVSpec Note:(12 Valve) VIN Code "V" 98-01 MAZDA B3000 3.0L 2954CC V6 OHVSpec Note:(12 Valve) VIN Code "U" 94-96 MAZDA B3000 3.0L 2983CC V6 OHVSpec Note:(12 Valve) VIN Code "U" Package includes: Graphite head gasket Intake manifold gasket Exhaust manifold gasket Valve cover gasket Viton valve stem seals Camshaft front O-rings Other Small Gaskets

  • Brand: Vincos
  • ASIN: B01LPSSURK

RL Concepts Black Short Ram Air Intake Kit + Filter 04-11 Ford Ranger B4000 Pickup 4.0 SOHC V6

RL Concepts Black Short Ram Air Intake Kit

T-306 Aluminum High Quality Finished Intake pipe as shown in the picture High quality built Washable and Reusable Air Filter as shown in the picture All necessary mounting hardwares, vacuum hoses and reducers will be included like shown in the picture MAF sensor adapter (This will be included only if your car needs one for installation, some cars may not need it) A General Installation instruction will be included, but if you need more help, email us and we'll gladly to help

  • Color: Black
  • Brand: R&L Racing
  • ASIN: B074S9CR45
  • UPC: 653451771908

Performance Air Intake for 1998 1999 2000 2001 Ford Ranger 2.5L / 98 99 00 01 Mazda B2500 2.5 l4 Engine (BLACK)

Performance Air Intake for 1998 1999 2000 2001

  • Color: Black
  • Brand: INTAKE KAI
  • ASIN: B07DRD19G4
  • UPC: 665612519076

DORMAN 911-906 Intake Manifold Runner Control Valve

DORMAN 911-906 Intake Manifold Runner Control

Save time, money and labor with Dorman's Intake Manifold Runner Control Valve. Now you can replace only the part, instead of the entire Intake Manifold. Replacement restores fuel efficiency, eliminates stuttering, and enables your vehicle to start and run reliably again.

  • Color: Ready To Paint If Needed
  • Brand: Dorman
  • ASIN: B00GJ1G6FW
  • UPC: 019495447344

K&N Performance Air Intake Kit for 04 Ford Ranger/Mazda B4000 V6-4.0L

K&N Performance Air Intake Kit for 04 Ford

The K&N air intake system replaces your vehicle’s restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. Guaranteed to increase horsepower Designed to improve throttle response and engine sound Lasts up to 100,000 miles before service is required (depending on driving conditions) Replaces entire factory air intake system Free-flowing high density polyethylene tube Easy to install, usually in 90 minutes or less Washable and reusable lifetime air filter K&N Million Mile Limited Warranty

  • Brand: K&N
  • ASIN: B004A71TK4
  • UPC: 783591624410

aFe Power FULL METAL Power F2-03012 Ford Ranger Performance Air Intake System (Dry, 3-Layer Filter)

aFe Power FULL METAL Power F2-03012 Ford Ranger

This FULL METAL Power Stage 2 cold air intake system produces up to 5HP and 7lbs. x ft. of torque and outflows the factory intake by up to 79%. Enclosed in the durable 18-Gauge, black powder-coated heat shield is an oil-free washable/reusable conical air filter that improves airflow for increased horsepower and torque. This intake system also features a 3-angle adaptor and a gun metal grey aluminum tube that replaces the stock intake tract and directs increased airflow with improved volumetric efficiency for maximum performance. This system mounts to the lower half of the factory air box. 4-1/2” Conical Filter with Inverted Top- This intake utilizes a huge, 4-1/2" oval conical Pro DRY S performance air filter with inverted top for maximum flow. This 3-layer progressive, non-oiled synthetic air filter requires no oils for cleaning for maximum convenience. Top Mounted Heat Shield Design- aFe developed this heat shield to snap onto the top of the lower half of the factory air box to provide a hassle-free installation utilizing factory mounting locations. 3-Angle Adaptor- The 3-angle adaptor is used to speed up the air flow after the air filter for improved performance and throttle response. Hassle Free Installation – This intake replaces the factory intake box and the factory in...

  • Brand: aFe Power
  • ASIN: B007ZDS30Y
  • UPC: 802959530207

Rtunes Racing Short Ram Air Intake Kit + Filter Combo RED For 98-01 Ford Ranger / 98-01 Mazda B3000 3.0L V6

Rtunes Racing Short Ram Air Intake Kit +

  • Brand: Rtunes Racing
  • ASIN: B07FN5L46V
  • UPC: 615213980300

Rtunes Racing Cold Air Intake Kit + Filter Combo BLACK For 01-04 Ford Explorer/Ranger 01-03 Mazda B4000 V6 4.0L SOHC

Rtunes Racing Cold Air Intake Kit + Filter

This Cold Air intake is brand new in box condition. It will provide an increase performance power, by adding more drag of air to your engine. In resulting better throttle response and higher power output. It a easy to install product, no need for professional installation. No additional parts will be needed for installation after you purchase the kit. High quality build washable and reusable air filter.

  • Color: Black
  • Brand: Rtunes Racing
  • ASIN: B07FN9C3P4
  • UPC: 615213977102

Performance Air Intake for 1995 1996 1997 Ford Ranger 2.3L / 95 96 97 Mazda B2300 2.3 l4 Engine (BLACK)

Performance Air Intake for 1995 1996 1997 Ford

  • Color: Black
  • Brand: INTAKE KAI
  • ASIN: B07DQFFVXT
  • UPC: 665612519045

Standard Motor Products AX3T Air Charge Temperature Sensor

Standard Motor Products AX3T Air Charge Temperature

Air Charged Temperature Sensor

  • Brand: Standard Motor Products
  • ASIN: B004BTGLRW
  • UPC: 025623164878

RL Concepts 3" Red Cold Air Intake + Filter For 01-03 Ford Explorer/Explorer Sport Trac/Ranger/4.0L V6

RL Concepts 3" Red Cold Air Intake +

T-306 Aluminum High Quality Finished Intake pipe as shown in the picture High quality built Washable and Reusable Air Filter as shown in the picture All necessary mounting hardwares, vacuum hoses and reducers will be included like shown in the picture MAF sensor adapter (This will be included only if your car needs one for installation, some cars may not need it) A General Installation instruction will be included, but if you need more help, email us and we'll gladly to help

  • Color: Red
  • Brand: R&L Racing
  • ASIN: B074RDDPQB
  • UPC: 653451766645

RL Concepts Red Short Ram Air Intake Kit + Filter 95-97 Ford Ranger All Model with 2.3L 4-Cyl

RL Concepts Red Short Ram Air Intake Kit

T-306 Aluminum High Quality Finished Intake pipe as shown in the picture High quality built Washable and Reusable Air Filter as shown in the picture All necessary mounting hardwares, vacuum hoses and reducers will be included like shown in the picture MAF sensor adapter (This will be included only if your car needs one for installation, some cars may not need it) A General Installation instruction will be included, but if you need more help, email us and we'll gladly to help

  • Color: Red
  • Brand: R&L Racing
  • ASIN: B07739369Z
  • UPC: 653451776989

K&N 57-2540 FIPK Performance Air Intake System

K&N 57-2540 FIPK Performance Air Intake

The kit replaces your vehicle's restrictive factory air filter and air intake housing. K&N intake systems are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your vehicle's engine to inhale a larger volume of air than the OEM air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The filters on these kits are washable, reusable and easy to install with tools commonly available.

  • Brand: K&N
  • ASIN: B000CO9U2I
  • UPC: 024844103857

MAHLE Original MS19219 Fuel Injection Plenum Gasket Set

MAHLE Original MS19219 Fuel Injection Plenum Gasket

MAHLE Original gaskets provide world class sealing products trusted by OEMs & Technicians around the globe

  • Brand: MAHLE Original
  • ASIN: B007DKQ090
  • UPC: 027067449269

K&N 57-2554 FIPK Performance Air Intake System

K&N 57-2554 FIPK Performance Air Intake

The kit replaces your vehicle's restrictive factory air filter and air intake housing. K&N intake systems are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your vehicle's engine to inhale a larger volume of air than the OEM air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The filters on these kits are washable, reusable and easy to install with tools commonly available.

  • Brand: K&N
  • ASIN: B000CO9U2S
  • UPC: 024844109316
Similar Intake Ford Ranger Shopping Results