NEW CURRIE LEAF SPRING & SHOCK MOUNTING PLATES WITH U-BOLTS FOR 64-73 FORD MUSTANGS, 8 1/2" TALL U-BOLTS FIT 3" REAR END HOUSING AXLE TUBES, 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973

NEW CURRIE LEAF SPRING & SHOCK MOUNTING PLATES

New Currie '64-'73 Mustang Spring Plates w/ 3" U-Bolts (Currie Part # CE-7007). This new spring plate set from Currie includes the CE-7006 heavy duty reproduction spring plates that feature slotted u-bolt holes for use on new housings with larger tubes than stock, as well as integrated shock mounting points just like the original plates. This kit also includes a full set of grade 8 1/2"-20 thread u-bolts for 3" tubes, washers and nuts. Plates are semi-gloss black powder coat finish. This is for one pair of spring plates (right and left), 4 u-bolts, 8 washers, and 8 nuts.

  • Color: CE-7007
  • Brand: Southwest Speed
  • ASIN: B06XYVSQ48

S10 10-Bolt Rear Axle Leaf Spring Plates, Zinch Finish

S10 10-Bolt Rear Axle Leaf Spring Plates, Zinch

Hole pattern is 3.25" x 3.25"

  • Brand: Speedway Motors
  • ASIN: B075NTMSGG

Sturdy Built Single Axle Galvanized U Bolt Kit for mounting Boat Trailer Leaf Springs for 2x2 axle - 5 1/4" Long

Sturdy Built Single Axle Galvanized U Bolt Kit

All the hardware to mount a single axle to your leaf springs together in one kit. The kit is designed to install a 2 inch by 2 inch square axle, and the Hot-Dipped galvanized coating on all of the parts helps prevent rust in the harsh marine environments. This U-Bolt Kit is used to mount your trailer leaf springs to your axle by using (2) U-Bolts and (1) 4 hole plate on each side. This kit includes (4) square U-Bolts, (2) Galvanized 4 Hole Mounting Plates, and (8) galvanized nuts and lock washers, so you can attach both springs to a single axle. This Trailer U Bolt kit is most common on boat trailers with either 2,220 lb or 3500 lb trailer axles using 1 ¾ wide springs, but it will also fit 2-inch wide springs.

  • Brand: Sturdy Built
  • ASIN: B07PPW15X2

Sturdy Built Single Axle Galvanized U Bolt Kit for mounting Boat Trailer Leaf Springs for 2x3 axle - 6 1/4" Long

Sturdy Built Single Axle Galvanized U Bolt Kit

All the hardware to mount a single axle to your leaf springs together in one kit. The kit is designed to install a 2 inch by 3 inch square axle, and the Hot-Dipped galvanized coating on all of the parts helps prevent rust in the harsh marine environments. This U-Bolt Kit is used to mount your trailer leaf springs to your axle by using (2) U-Bolts and (1) 4 hole plate on each side. This kit includes (4) galvanized square U-Bolts, (2) Galvanized 4 Hole Mounting Plates, and (8) galvanized nuts and lock washers, so you can attach both springs to a single axle. This Trailer U Bolt kit is most common on boat trailers with either 3500 lb or 3,700 lb trailer axles using 1 ¾ wide springs, but it will also fit 2-inch wide springs.

  • Brand: Sturdy Built
  • ASIN: B07PMTK935

Omix-Ada 18271.15 Leaf Spring Plate

Omix-Ada 18271.15 Leaf Spring

This replacement spring mounting plate will replace the OE rusted and cracked mounting plate

  • Brand: Omix-Ada
  • ASIN: B000FQ7PL6
  • UPC: 804314035617

Leaf Spring Lower Right Shock Mounting Plate, 2.5 Inch Spring

Leaf Spring Lower Right Shock Mounting Plate, 2.5

Steel leaf spring lower shock mounting plate. Choose left or right. Eases the mounting of rear shocks. Accepts 2.5" leaf spring Bolt holes are 3-5/8" apart center to center Bolt holes are 3-1/8" center to center on flange sides Bolt holes are 9/16" I.D. Single shock boss Note: The left shock mounting plate is shown on the left side of the photograph. The right shock mounting plate is shown on the right side of the photograph.

  • Brand: Speedway Motors
  • ASIN: B075NJWTQJ

Leaf Spring Lower Left Shock Mounting Plate, 2.5 Inch Spring

Leaf Spring Lower Left Shock Mounting Plate, 2.5

Steel leaf spring lower shock mounting plate. Choose left or right. Eases the mounting of rear shocks. Accepts 2.5" leaf spring Bolt holes are 3-5/8" apart center to center Bolt holes are 3-1/8" center to center on flange sides Bolt holes are 9/16" I.D. Single shock boss Note: The left shock mounting plate is shown on the left side of the photograph. The right shock mounting plate is shown on the right side of the photograph.

  • Brand: Speedway Motors
  • ASIN: B075NLW9Q2

LIBRA New Trailer U Bolt kit for 5200-7000lbs 3" Round Axle 7" Long 1/2" Dia -20080

LIBRA New Trailer U Bolt kit for 5200-7000lbs

  • Brand: LIBRA
  • ASIN: B01D3WQHPI
  • UPC: 758399866867

Eckler's Premier Quality Products 25111260 Corvette Leaf Spring Center Mounting Plate Kit With 9/16"Bolts

Eckler's Premier Quality Products 25111260 Corvette Leaf Spring

For Steel & Composite Monosprings Includes Mounting Plate, Bolts & Washers NOTE: For 1978, check bolt size before ordering.

  • Brand: Premier Quality Products
  • ASIN: B01KN099RG

Sturdy Built Single Axle Galvanized U Bolt Kit for mounting Boat Trailer Leaf Springs for 2x2 axle - 4 13/16" Long

Sturdy Built Single Axle Galvanized U Bolt Kit

All the hardware to mount a single axle to your leaf springs together in one kit. The kit is designed to install a 2 inch by 2 inch square axle, and the Hot-Dipped galvanized coating on all of the parts helps prevent rust in the harsh marine environments. This U-Bolt Kit is used to mount your trailer leaf springs to your axle by using (2) U-Bolts and (1) 4 hole plate on each side. This kit includes (4) square U-Bolts, (2) Galvanized 4 Hole Mounting Plates, and (8) galvanized nuts and lock washers, so you can attach both springs to a single axle. This Trailer U Bolt kit is most common on boat trailers with either 2,220 lb or 3500 lb trailer axles using 1 ¾ wide springs, but it will also fit 2-inch wide springs.

  • Brand: Sturdy Built
  • ASIN: B07PQZTKMQ

MTKT | Mounting kit for various SuperSprings applications

MTKT | Mounting kit for various SuperSprings

Mounting kits and poly spring pad mounting blocks are used as a fulcrum centered underneath SuperSprings. They sit on top of the factory spring pack assembly underneath the SuperSprings. They act to elevate, insulate, and anchor the SuperSprings to the factory spring assembly.

  • Brand: SuperSprings International, Inc.
  • ASIN: B000NZPNA4
  • UPC: 814699001213

Sturdy Built Single Axle Galvanized U Bolt Kit for mounting Boat Trailer Leaf Springs for 2x2 axle - 4 5/16" Long

Sturdy Built Single Axle Galvanized U Bolt Kit

All the hardware to mount a single axle to your leaf springs together in one kit. The kit is designed to install a 2 inch by 2 inch square axle, and the Hot-Dipped galvanized coating on all of the parts helps prevent rust in the harsh marine environments. This U-Bolt Kit is used to mount your trailer leaf springs to your axle by using (2) U-Bolts and (1) 4 hole plate on each side. This kit includes (4) square U-Bolts, (2) Galvanized 4 Hole Mounting Plates, and (8) galvanized nuts and lock washers, so you can attach both springs to a single axle. This Trailer U Bolt kit is most common on boat trailers with either 2,220 lb or 3500 lb trailer axles using 1 ¾ wide springs, but it will also fit 2-inch wide springs.

  • Brand: Sturdy Built
  • ASIN: B07PMTKNR5

Maxboost DuraHold Series Car Phone Mount for iPhone Xs Max XR X 8 7 6s Plus SE,Galaxy S10 5G S10+ S10e S9 S8 Edge,Note 9,LG G8,Pixel,HTC[Washable Strong Sticky Gel Pad/Extendable Holder Arm (Upgrade)]

Maxboost DuraHold Series Car Phone Mount for iPhone

Maxboost DuraHold Series Car Phone Mount with Washable Sticky Gel Pad and Extendable Arm. EASY TO INSTALL No tools necessary for installation! Simply adhere base of Car Mount to desired surface and lock it in place. Ensure surface has been wiped down and cleaned before installing. WIDE COMPATIBILITIES The Mount Head Clamp can extended up to 3.7-inch (max) width. Compatible with most smartphone including iPhone, Nexus, Pixel, Galaxy, HTC , Blackberry and more. Ensure you check your phone spec for optimal fit. POWERFUL SUCTION Equipped with a suction-cup gel pad that provides strong suction and leaves no residue behind. The ultra-strong suction cup can be reconditioned back to its original form by rinsing the suction down with warm water and allowing it to air dry. Also features a two-lock locking mechanism for that extra secure hold. BOX CONTENT 1 x Maxboost Extendable Arm Car Mount 1 x Adhesive Mounting Square 1 x User Manual OPTIMAL USAGE 1. Clean surface before installing the mount. 2. It is highly recommended to use the Adhesive Mounting Square (included) on uneven/textured surfaces. Install car mount on top of this base for the best hold. 3. To insert your smartphone into the mount, press and hold down the Quick Release Button. Then push the extendable arms back in. 4. I...

  • Color: Premium Clear GEL Suction
  • Brand: Maxboost
  • ASIN: B07F462SXM
  • UPC: 600231107679

MXKT | Mounting kit for various SuperSprings applications

MXKT | Mounting kit for various SuperSprings

Mounting kits and poly spring pad mounting blocks are used as a fulcrum centered underneath SuperSprings. They sit on top of the factory spring pack assembly underneath the SuperSprings. They act to elevate, insulate, and anchor the SuperSprings to the factory spring assembly.

  • Brand: SuperSprings International, Inc.
  • ASIN: B00715DJWI
  • UPC: 814699001428

Sturdy Built Tandem Axle Galvanized U Bolt Kit for mounting Boat Trailer Leaf Springs for 2x3 axle - 6 1/4" Long

Sturdy Built Tandem Axle Galvanized U Bolt Kit

All the hardware to mount 2 axles to your leaf springs together in one Tandem-Axle kit. The kit is designed to install 2 inch by 3 inch square axles, and the Hot-Dipped galvanized coating on all of the parts helps prevent rust in the harsh marine environments. This U-Bolt Kit is used to mount your trailer leaf springs to your axle by using (4) U-Bolts and (2) 4 hole plate on each axle. This kit includes (8) square U-Bolts, (4) Galvanized 4 Hole Mounting Plates, and (16) galvanized nuts and lock washers, so you can attach both axles to your Trailer Leaf Springs. This Trailer U Bolt kit is most common on boat trailers with either 3500 lb or 3,700 lb trailer axles using 1 ¾ wide springs, but it will also fit 2-inch wide springs.

  • Brand: Sturdy Built
  • ASIN: B07PQZQHH7

U-bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-bolts

U-bolt Kit for Mounting 3,500-lb, Round Trailer Axles

  • Brand: Redline
  • ASIN: B009VI3T96

Omix-Ada 18271.14 Leaf Spring Plate

Omix-Ada 18271.14 Leaf Spring

This replacement spring mounting plate will replace the OE rusted and cracked mounting plate

  • Brand: Omix-Ada
  • ASIN: B000FQ1X3W
  • UPC: 804314035600

Sturdy Built Single Axle Galvanized U Bolt Kit for mounting Boat Trailer Leaf Springs for 2 inch Square axle - Diagonal

Sturdy Built Single Axle Galvanized U Bolt Kit

All the hardware to mount a single axle to your leaf springs together in one kit. The kit is designed to install a 2 inch by 2 inch square axle, and the Hot-Dipped galvanized coating on all of the parts helps prevent rust in the harsh marine environments. This U-Bolt Kit is used to mount your trailer leaf springs to your axle by using (1) U-Bolt and (1) 2 hole plate on each side, mounted diagonally across the leaf spring. This kit includes (2) galvanized square U-Bolts, (2) Galvanized 2 Hole Mounting Plates, and (4) galvanized nuts and lock washers, so you can attach both springs to a single axle. This Trailer U Bolt kit is most common on boat trailers with either 2,000 lb or 2,200 lb trailer axles using 1 ¾ wide springs.

  • Brand: Sturdy Built
  • ASIN: B07PQX959K

Daystar, Universal polyurethane bump stop 4-1/2" tall; 4-1/2" long; 2-1/2" wide with slotted mounting plate, competition style, KU09016BK, Made in America,Black

Daystar, Universal polyurethane bump stop 4-1/2" tall; 4-1/2"

Bump Stops are a critical part of the vehicle's suspension - they prevent damaging over-compression and eliminate harsh bottoming of the suspension. Daystar's Bump Stops is and tested under the most rigorous conditions imaginable to deliver positive stopping power without deflecting. The bumpstops are available in a variety of application-specific and universal applications - from low-profile to bullet-shaped to pyramid competition-style. Daystar bump stops are used and abused worldwide.

  • Color: Black
  • Brand: Daystar
  • ASIN: B003EOXAS8
  • UPC: 814423016193

Sturdy Built Single Axle Galvanized U Bolt Kit for mounting Boat Trailer Leaf Springs for 2 3/8 Round Axle - 5 1/4" Long

Sturdy Built Single Axle Galvanized U Bolt Kit

All the hardware to mount a single axle to your leaf springs together in one kit. The kit is designed to install a 2 3/8 inch diameter Round Tube Axle, and the Hot-Dipped galvanized coating on all of the parts helps prevent rust in the harsh marine environments. This U-Bolt Kit is used to mount your trailer leaf springs to your axle by using (2) U-Bolts and (1) 4 hole plate on each side. This kit includes (4) Galvanized Round U-Bolts, (2) Galvanized 4 Hole Mounting Plates, and (8) galvanized nuts and lock washers, so you can attach both springs to a single axle. This Trailer U Bolt kit is most common on boat trailers with either 2,220 lb or 3500 lb trailer axles using 1 ¾ wide springs, but it will also fit 2-inch wide springs.

  • Brand: Sturdy Built
  • ASIN: B07PQXWLB1
Similar Leaf Spring Mounting Plate Shopping Results