TTC Keyway Broach Set - Number Of Combinations: 13 SIZE : 4mm-B, 5mm-B, 6mm-C and8mm-C Bushing Diameter : 12mm-B, 14mm-B,16mm-B, 18mm-B, 20mm-C, 22mm-C,24mm Number Of Broaches: 4 Number Of Bushings: 9 Measurement Type: Metric

TTC Keyway Broach Set - Number Of Combinations:

Includes: Metric Set: (4) Broaches: 4mm-B, 5mm-B, 6mm-C and 8mm-C (9) Collared bushings: 12mm-B, 14mm-B, 16mm-B, 18mm-B, 20mm-C, 22mm-C, 24mm-C, 26mm-C and 28mm-C

  • Brand: TTC
  • ASIN: B005F01ZQS

DCT Metric Drill Bit Guide Centering Punch 8-Piece Center Drilling Set Kit – 4mm to 12mm Bushings, Locating Pin, Guide

DCT Metric Drill Bit Guide Centering Punch 8-Piece

Accurately locate exact drilling centers and guide drill bits perfectly perpendicular to your woodworking piece with the DCT Metric Drill Bit Guide Centering Punch 8-Piece Center Drilling Set Kit - 4mm to 12mm Bushings, Locating Pin, & Guide. Use the disc-shaped recess on the bottom of the drill guide for spheres and the V-shaped groove for cylinders and edges. Drop the included locating pin inside the 4mm bushing with the flat top of the pin going into the bottom of the bushing first (do not attempt pointed tip end into bushing) and then center over the spot to drill. Place 2 small nails (not included) in drill guide holes and turn drill guide so each nail touches opposite side of the wood. This package includes a guide, locating pin, and 6 metric drill bushings for your convenience. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

  • Brand: DCT
  • ASIN: B079K1HHK3
  • UPC: 688295890614

Isostatics 601086-2 AM-811-20 SAE841 Oilube Powdered Metal Bronze Sleeve Bearings/Bushings, Metric (Pack of 2)

Isostatics 601086-2 AM-811-20 SAE841 Oilube Powdered Metal Bronze

8 MM I.D. x 11 MM O.D. x 20 MM Length, SAE 841 Powdered Metal Bronze, Sleeve Bearing, Metric.

  • Brand: Isostatics
  • ASIN: B01CI9NXQS

MasterDrive JA22MM, 22MM QD METRIC BUSHING

MasterDrive JA22MM, 22MM QD METRIC

This MasterDrive quick disconnect bushing is used for mounting a quick disconnect pulley, sheave, or sprocket on a drive shaft. It is split through the flange and taper to provide strong clamping on the shaft. It is keyed to the shaft to prevent the shaft from rotating in the bushing, and it has a set screw over the keyway to help keep the key in place on vertical shafts and with vibrating loads. This quick disconnect bushing is used in automobiles, construction equipment, agricultural machinery, and other industries.

  • Brand: MasterDrive
  • ASIN: B01HNOTCZE
  • UPC: 806372024077

Item # 601274, Oilube Powdered Metal Bronze SAE841 Sleeve Bearings/Bushings - METRIC

Item # 601274, Oilube Powdered Metal Bronze SAE841

18 MM I.D. x 24 MM O.D. x 22 MM Length, SAE 841 Powdered Metal Bronze, Sleeve Bearing, Metric

  • Brand: Isostatic
  • ASIN: B00IG7MTHQ
  • UPC: 846802061166

Metric Bushing Bearing Driver | 17pc Set Aluminum Install Remove 10-42mm

Metric Bushing Bearing Driver | 17pc Set Aluminum

High Quality Set for most Imports Complete Set allows you to install or remove bearings from 10-42mm in diameter Aluminum Construction will not scratch surface or affect bushing tolerance This ensures peak performance for your engine, transmission, and hubs Includes Blow Mold Case for Storage 17pc Set Includes: 3 aluminum driver handles 14 aluminum metric bushing adapters: 10-12mm, 12-14mm, 14-16mm, 16-18mm, 18-20mm, 20-22mm, 22-24mm, 25-27mm, 28-30mm, 30-34mm, 32-26mm, 35-40mm, 38-42mm

  • Brand: UNB
  • ASIN: B01H4Y0ADG
  • UPC: 715821243337

Kipp 06253-6310X25 Thermoplastic/Steel Novo·Grip Grey Five Lobe Grips with M10 External Thread, Steel Bushing, Metric, 44 mm Height, 63 mm Diameter, Anthracite Grey Color (Pack of 10)

Kipp 06253-6310X25 Thermoplastic/Steel Novo·Grip Grey Five Lobe Grips

Modern design and hi-tech engineering technology make Kipp’s Novo·Grip line pleasing to the eye and highly functional. Novo·Grip Five Lobe Grips are a cost effective alternative to make customers products stand out!

  • Brand: Kipp
  • ASIN: B013J8GW7Y

Pack of 4 LME12UU Linear Motion 12 mm Ball Bushings, Closed Type, Metric

Pack of 4 LME12UU Linear Motion 12 mm

These four linear motion closed type ball bushings have 12 mm bores and are suitable for use in mounted slide units to carry components in precision linear motion applications, such as in printing machines and computer numerical control (CNC) equipment. This ball bushing insert is used where shaft support clearance is not a factor and it compensates for misalignment caused by tolerance defects and mounting errors. The linear motion ball bushing has a chromium steel case for strength and rigidity, a synthetic resin retainer plate for accurate ball guidance and low noise, four rows of recirculating balls inside the ball bushing for smooth running, seals at each end to retain lubricant and protect against contamination, and a maximum operating temperature of 80 degrees Celsius/176 degrees Fahrenheit. As part of a linear motion system, this ball bushing can carry a load accurately along a straight line and is suitable for use in applications, such as measuring systems, printing equipment, and CNC tools.SpecificationsInside diameter12 mmOutside diameter22 mmLength32 mmMounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the typ...

  • Brand: VXB
  • ASIN: B002BBJUIO

Pack of 4 LME25UU Linear Motion 25 mm Ball Bushings, Closed Type, Metric

Pack of 4 LME25UU Linear Motion 25 mm

4 Linear Ball Bushings Item LME25UU Works with 25mm Shafts Four LME25UU Linear Motion Ball Bushing work with a 25 mm Shafts, they are marked LME25UU, Size is 25mmx 40mmx 58mm. * Item: LME25UU Ball Bearings * Type: Linear Motion Ball Bushings * Bearings have Built-in Rubber Seals * Number of Ball Circuit: 6 * Inner Diameter: 25mm * Outer Diameter: 40mm * Length: 58mm * Size: 25mmx 40mmx 58mm * Quantity: Four Bearings * Dynamic load rating Cr: 95 KFG * Static load rating Cor: 120 KFG * IKO: LBE 25 UU * STAR: 0602-025-10 * THOMSON: 0602-025-10 * INA: KB 2558 PP * FAG: LAA 25x40x58 2RS * Equal: LBCR 25-2LS

  • Brand: VXB
  • ASIN: B002BBCQVM

Morris 22568 Cable Gland with Strain Relief, Nylon, Metric Thread, 0.98" Mounting Hole Size, 0.51"-0.71" Cable Size

Morris 22568 Cable Gland with Strain Relief, Nylon,

Internal Ratchet with Self-Locking feature protects against vibrations. Watertight. ‘Collet’ design of body accommodates various size cords, cables, tubing, etc.. Nylon Metric thread cable glands body material is resistant to most common chemicals & solvents. For best results, use the minimum size that fits into your cable. No disassembly required. Made of UL approved NYLON 66, 94V-2 (Black). IP68 Rated Submersible & Dustproof. UL Recognized.

  • Brand: Morris
  • ASIN: B005GDFLLE
  • UPC: 601986225687

Bushings for Metric Sized Broaches Diameter: 15mm-B

Bushings for Metric Sized Broaches Diameter:

A(I), B(II) and C(III) : Collared D(IV) and E(V) : Plain

  • Brand: Hassay Savage
  • ASIN: B0067BXC1U

Bushings for Metric Sized Broaches Diameter: 16mm-B

Bushings for Metric Sized Broaches Diameter:

A(I), B(II) and C(III) : Collared D(IV) and E(V) : Plain

  • Brand: Hassay Savage
  • ASIN: B0067BXCC4

Item # 601118, Oilube Powdered Metal Bronze SAE841 Sleeve Bearings/Bushings - METRIC

Item # 601118, Oilube Powdered Metal Bronze SAE841

10 MM I.D. x 13 MM O.D. x 16 MM Length, SAE 841 Powdered Metal Bronze, Sleeve Bearing, Metric

  • Brand: Isostatic
  • ASIN: B00IG7P1B2
  • UPC: 846802059606

OTC 4407 Metric Bushing Driver Set - 17 Piece

OTC 4407 Metric Bushing Driver Set - 17

Aluminum construction won't mar the bushing or affect bushing tolerance, which is critical for efficient operation of the engine, transmission, and hubs. Enables you to remove and install bushings ranging from 10mm to 42mm in diameter, as used import cars, trucks, tractors, construction equipment, electric motors, and many other components having bushings. 17-piece tool kit for motorcycles, Asian and European vehicles contains adapters: 10-12 mm, 14-16 mm, 15-17 mm, 16-18 mm, 18-20 mm, 20-22 mm, 22-24 mm, 25-27 mm, 28-30 mm, 30-34 mm, 32-36 mm, 35-40 mm, 38-42 mm; one small driver handle; one medium driver handle; one large driver. All housed in a blow-molded storage case.

  • Brand: OTC
  • ASIN: B0021USO3M
  • UPC: 731413504846

Isostatics 601092-2 AM-812-16 SAE841 Oilube Powdered Metal Bronze Sleeve Bearings/Bushings, Metric (Pack of 2)

Isostatics 601092-2 AM-812-16 SAE841 Oilube Powdered Metal Bronze

8 MM I.D. x 12 MM O.D. x 16 MM Length, SAE 841 Powdered Metal Bronze, Sleeve Bearing, Metric.

  • Brand: Isostatics
  • ASIN: B01CI9OBQ4

Morris 22532 Cable Gland, Metric Thread, Nylon, 0.47" Mounting Hole Size, 0.12"-0.26" Cable Size

Morris 22532 Cable Gland, Metric Thread, Nylon, 0.47"

Internal Ratchet with Self-Locking feature protects against vibrations. Watertight. ‘Collet’ design of body accommodates various size cords, cables, tubing, etc.. Nylon Metric thread cable glands body material is resistant to most common chemicals & solvents. For best results, use the minimum size that fits into your cable. Easy to Assemble. Wide Clamping Range. No disassembly required. Made of UL approved NYLON 66, 94V-2 (Black). IP68 Rated Submersible & Dustproof.

  • Brand: Morris
  • ASIN: B005GDFJIY
  • UPC: 601986225328

Item # 601081, Oilube Powdered Metal Bronze SAE841 Sleeve Bearings/Bushings - METRIC

Item # 601081, Oilube Powdered Metal Bronze SAE841

8 MM I.D. x 10 MM O.D. x 10 MM Length, SAE 841 Powdered Metal Bronze, Sleeve Bearing, Metric

  • Brand: Isostatic
  • ASIN: B00IG7LTX6
  • UPC: 846802059231

Item # 601091, Oilube Powdered Metal Bronze SAE841 Sleeve Bearings/Bushings - METRIC

Item # 601091, Oilube Powdered Metal Bronze SAE841

8 MM I.D. x 12 MM O.D. x 14 MM Length, SAE 841 Powdered Metal Bronze, Sleeve Bearing, Metric

  • Brand: Isostatic
  • ASIN: B00IG7KRFM
  • UPC: 846802059330

Jig Bushings, Metric

Jig Bushings,

  • ASIN: 0791824705

LBK20LUU Linear Motion 20 mm Flange Mount Ball Bushing, Square Flange, Long, Closed Type, Metric

LBK20LUU Linear Motion 20 mm Flange Mount Ball

Square Flanged Linear Motion Long Ball Bushings 20mm Item Main Dimensions and Tolerances Basic Load Rating dr D L flange dynamic (CN) static (CoN) mm tolerances mm tolerances tolerances tolerances Df mm K mm t mm Dp mm X mm Y mm Z mm 20mm 20 0 -12 32 0 -19 80 300 54 42 8 43 5.5 9 5.1 1400 2740

  • Brand: VXB
  • ASIN: B002BBH2ES

Item # 601140, Oilube Powdered Metal Bronze SAE841 Sleeve Bearings/Bushings - METRIC

Item # 601140, Oilube Powdered Metal Bronze SAE841

10 MM I.D. x 16 MM O.D. x 30 MM Length, SAE 841 Powdered Metal Bronze, Sleeve Bearing, Metric

  • Brand: Isostatic
  • ASIN: B00IG7PMKC
  • UPC: 846802059828

Morris 22566 Cable Gland with Strain Relief, Nylon, Metric Thread, 0.79" Mounting Hole Size, 0.39"-0.55" Cable Size

Morris 22566 Cable Gland with Strain Relief, Nylon,

Internal Ratchet with Self-Locking feature protects against vibrations. Watertight. ‘Collet’ design of body accommodates various size cords, cables, tubing, etc.. Nylon Metric thread cable glands body material is resistant to most common chemicals & solvents. For best results, use the minimum size that fits into your cable. No disassembly required. Made of UL approved NYLON 66, 94V-2 (Black). IP68 Rated Submersible & Dustproof. UL Recognized.

  • Brand: Morris
  • ASIN: B005GDFLI2
  • UPC: 601986225663

GN 609.5 Series Stainless Steel Metric Size Spacer Bushings for Indexing Plungers, 10mm Bore Diameter, 12mm Item Diameter, 6mm Item Length

GN 609.5 Series Stainless Steel Metric Size Spacer

GN 609.5 spacer bushings compensate for the body thread lengths on indexing plungers to allow mounting through walls of varying thicknesses. Bushings are suitable for use with these indexing plungers: GN 607, GN 607.1, GN 617, GN 617.1, GN 717, GN 817, and GN 822.

  • Brand: JW Winco
  • ASIN: B00BTHKJ5Y

Keyway Broach Set - Metric (I: 2mm, 3mm, II: 4mm, 5mm, III: 6mm, 8mm Broaches & 18 Bushings)

Keyway Broach Set - Metric (I: 2mm, 3mm,

All broaches sets are supplied in fitted boxes and come complete with broaches, slotted bushings, and necessary shims.

  • Brand: Hassay Savage
  • ASIN: B0067BWVBW

Domeiki Metric Bushing Bearing Driver 17pc Set Aluminum Install Remove 10-42mm

Domeiki Metric Bushing Bearing Driver 17pc Set Aluminum

High Quality Set for most ImportsComplete Set allows you to install or remove bearings from 10-42mm in diameterAluminum Construction will not scratch surface or affect bushing toleranceThis ensures peak performance for your engine, transmission, and hubsInclu Blow Mold Case for Storage17pc Set Inclu:3 aluminum driver handles14 aluminum metric bushing adapters:10-12mm, 12-14mm, 14-16mm, 16-18mm, 18-20mm, 20-22mm, 22-24mm, 25-27mm, 28-30mm, 30-34mm, 32-26mm, 35-40mm, 38-42mm

  • Color: Silver
  • Brand: Domeiki Home
  • ASIN: B01LY75AO1

GN 609.5 Series Stainless Steel Metric Size Spacer Bushings for Indexing Plungers, 12mm Bore Diameter, 17mm Item Diameter, 5mm Item Length

GN 609.5 Series Stainless Steel Metric Size Spacer

GN 609.5 spacer bushings compensate for the body thread lengths on indexing plungers to allow mounting through walls of varying thicknesses. Bushings are suitable for use with these indexing plungers: GN 607, GN 607.1, GN 617, GN 617.1, GN 717, GN 817, and GN 822.

  • Brand: JW Winco
  • ASIN: B00BTHKWJM

Click.Store Metric Bushing Bearing Driver | 17pc Set Aluminum Install Remove 10-42mm

Click.Store Metric Bushing Bearing Driver | 17pc Set

High Quality Set for most Imports Complete Set allows you to install or remove bearings from 10-42mm in diameter Aluminum Construction will not scratch surface or affect bushing tolerance This ensures peak performance for your engine, transmission, and hubs Includes Blow Mold Case for Storage 17pc Set Includes: 3 aluminum driver handles 14 aluminum metric bushing adapters: 10-12mm, 12-14mm, 14-16mm, 16-18mm, 18-20mm, 20-22mm, 22-24mm, 25-27mm, 28-30mm, 30-34mm, 32-26mm, 35-40mm, 38-42mmPlease note: This is a generic product and not an OEM product and is not covered under any OEM manufacturer's warranty. The OEM brand names and logos are the registered trademarks of their respective owners. Any use of the OEM brand name or model designation for this product is made solely for purposes of demonstrating compatibility.

  • Brand: Click.Store
  • ASIN: B07L3ZZP9Y
  • UPC: 804062925048

Item # 601265, Oilube Powdered Metal Bronze SAE841 Sleeve Bearings/Bushings - METRIC

Item # 601265, Oilube Powdered Metal Bronze SAE841

18 MM I.D. x 22 MM O.D. x 18 MM Length, SAE 841 Powdered Metal Bronze, Sleeve Bearing, Metric

  • Brand: Isostatic
  • ASIN: B00IG7PKOK
  • UPC: 846802061074

17pc Metric Bushing Bearing Driver Aluminum Install Remove Set 10-42mm W/ Case

17pc Metric Bushing Bearing Driver Aluminum Install Remove

High Quality Set for most Imports Complete Set allows you to install or remove bearings from 10-42mm in diameter Aluminum Construction will not scratch surface or affect bushing tolerance This ensures peak performance for your engine, transmission, and hubs Includes Blow Mold Case for Storage 17pc Set Includes: 3 aluminum driver handles 14 aluminum metric bushing adapters: 10-12mm, 12-14mm, 14-16mm, 16-18mm, 18-20mm, 20-22mm, 22-24mm, 25-27mm, 28-30mm, 30-34mm, 32-26mm, 35-40mm, 38-42mm

  • Brand: GARNIGR MAKER
  • ASIN: B01M5E3ECN
  • UPC: 740647888141

#3158 FABER TPM Metric Tailpiece/Bridge Stud Bushings, GLOSS NICKEL, made from the finest GERMAN STEEL! Replace the TONE ROBBING ZINC bushings on your EPIPHONE or other Imported guitar!

#3158 FABER TPM Metric Tailpiece/Bridge Stud Bushings, GLOSS

FaberUSA is the exclusive authorized importer/distributor of Faber-Germany guitar parts for North and South America. What's This For?For Epiphone, Ibanez, Tokai, and others using 8M X 1.25 tailpiece studsWorks great with Faber® Tone-Lock™ tailpiece studsHighest quality German steelReplaces original non-steel metric tailpiece bushingsMay also be used to replace bridge post bushingsIncludes 8mm bolt to remove the existing bushingsSPECIFICATIONS:Material: Steel, platedWeight, pair: .78 oz./22.1gDiameter, flange: .564"/14.35mmDiameter, below flange: .481"/12.25mmLength: .827"/21mm

  • Brand: Faber
  • ASIN: B0777T37PW
  • UPC: 636836076065

Morris 22562 Cable Gland with Strain Relief, Nylon, Metric Thread, 0.47" Mounting Hole Size, 0.12"-0.26" Cable Size

Morris 22562 Cable Gland with Strain Relief, Nylon,

Internal Ratchet with Self-Locking feature protects against vibrations. Watertight. ‘Collet’ design of body accommodates various size cords, cables, tubing, etc.. Nylon Metric thread cable glands body material is resistant to most common chemicals & solvents. For best results, use the minimum size that fits into your cable. No disassembly required. Made of UL approved NYLON 66, 94V-2 (Black). IP68 Rated Submersible & Dustproof. Part# 22562 is NOT UL Recognized.

  • Brand: Morris
  • ASIN: B005GDFLCI
  • UPC: 601986225625

Martin 2517 25MM Taper Bushing, Sintered Steel, Metric, 25 mm Bore, 85.72 mm OD, 44.45 mm Length

Martin 2517 25MM Taper Bushing, Sintered Steel, Metric,

This Martin 2517 taper bushing is made of sintered steel and is used for mounting a taper bushed pulley, sheave, or sprocket on a drive shaft. It is flush mounted for reduced mounting width and has a split taper for a tight clamp to shafts. The bushing is made of sintered powder steel for greater strength and wear resistance than plain carbon steel. It is keyed to the shaft to prevent the shaft from rotating in the bushing, and it is interchangeable with taper bushings from various manufacturers. This taper bushing is used in automobiles, construction equipment, agricultural machinery, and home appliances, among others.Bushings are cylindrical parts used to mount pulleys, sheaves, sprockets, or other components to drive shafts for the transmission of mechanical power. Most bushings are split and have a tapered outside surface so they will clamp to the shaft when tightened against the tapered bore of the driven component. They are made of durable metals such as cast iron and steel. Bushings are used in automobiles, construction equipment, and machine tools, among others.Martin Sprocket & Gear manufactures power transmission and conveying products. The company, founded in 1951 and headquartered in Arlington, TX, provides tools that meet American National Standards Institute (ANSI),...

  • Brand: Martin
  • ASIN: B004BKITSU
  • UPC: 697950210940

22pcs Keyway Broach Collared Bushing Shim Set Kit Metric System For Computerized Numerical Control Router

22pcs Keyway Broach Collared Bushing Shim Set Kit

Product includes Broaches*4pcs Collared bushingsx13pcs Shimsx5pcs Product description 4 broaches: 4mmB1,5mmB1,6mmC,8mmC 13 Collared bushings: B1-12,14,15,16,C-18,19,20,22,24,25,26,28,30 5 shims Product features 4 broaches and 13 bushings = 26 keyway combinations All necessary shims The shipment will be arranged in 1-3 working days( not including customized product), and takes about another 3-9 working days to reach you.

  • Color: silver
  • Brand: YJINGRUI
  • ASIN: B01LHDJ8QK

Hornady 044606 Sure-Loc Lock Ring (Per 6)

Hornady 044606 Sure-Loc Lock Ring (Per

Hornady adjustable sure-loc lock rings, 6 pack. Sure-lock, lock rings lets you make precise adjustments of all standard 7/8 inch -14 dies and accessories. Clamps around the whole die. Cant damage the threads. Applies constant pressure across the threads, to hold the ring in place. Wrench flats to remove and replace dies without pliers ruining the lock ring.

  • Brand: Hornady
  • ASIN: B001OPTMU4
  • UPC: 090255044607

INA 81109TN Cylindrical Roller Thrust Bearing, Polyamide Nylon Cage, Open End, Metric, 45mm ID, 65mm OD, 14mm Width, 5000rpm Maximum Rotational Speed

INA 81109TN Cylindrical Roller Thrust Bearing, Polyamide Nylon

This INA cylindrical roller thrust bearing with a polyamide nylon cage is suitable for applications that support axial loads in one direction. The polyamide nylon cage is lightweight and produces less noise than brass cages. It has an open-end design, allowing lubrication to be applied in place. This bearing uses metric unit measurements for industry consistency and interchangeability and meets quality assurance specification s Deutsches Institut für Normung (DIN) 722/ International Organization for Standardization (ISO) 104 for roller thrust bearing boundary dimensions. Cylindrical roller thrust bearings are used in applications where high axial loads are present, such as automotive transmissions, material handling equipment, and lifting mechanisms, among others. Roller or rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction. They are usually composed of two rings, rolling bodies (such as bearings or cylinders), and a cage to house the parts. Cylindrical roller thrust bearings are suitable for applications that are required to support heavy axial loads and are used when thrust ball bearings or thrust needle bearings have insufficient load-carrying capacity. They are not suitable for transmitting radial loads. Roll...

  • Brand: INA
  • ASIN: B007D2N4G0
  • UPC: 035373019250

Isostatics 601093-2 AM-812-20 SAE841 Oilube Powdered Metal Bronze Sleeve Bearings/Bushings, Metric (Pack of 2)

Isostatics 601093-2 AM-812-20 SAE841 Oilube Powdered Metal Bronze

8 MM I.D. x 12 MM O.D. x 20 MM Length, SAE 841 Powdered Metal Bronze, Sleeve Bearing, Metric.

  • Brand: Isostatics
  • ASIN: B01CI9OGJG

Bearing Limited Hk4012 Needle Bearing - Drawn Cup - Caged - Metric

Bearing Limited Hk4012 Needle Bearing - Drawn Cup

New in Factory box - Bearing Limited Hk4012 Needle Bearing - Drawn Cup - Caged - Metric

  • Brand: Unknown
  • ASIN: B01CO4P61C

Metric Bushing Bearing Driver | 17pc Set Aluminum Install Remove 10-42mm

Metric Bushing Bearing Driver | 17pc Set Aluminum

High Quality Set for most Imports Complete Set allows you to install or remove bearings from 10-42mm in diameter Aluminum Construction will not scratch surface or affect bushing tolerance This ensures peak performance for your engine, transmission, and hubs Includes Blow Mold Case for Storage 17pc Set Includes: 3 aluminum driver handles 14 aluminum metric bushing adapters: 10-12mm, 12-14mm, 14-16mm, 16-18mm, 18-20mm, 20-22mm, 22-24mm, 25-27mm, 28-30mm, 30-34mm, 32-26mm, 35-40mm, 38-42mm

  • ASIN: B01B5XWGR0

12pcs/Set Ratchet Wrench Socket Kit with Extension Rod Repairing Hand Tool Hardware

12pcs/Set Ratchet Wrench Socket Kit with Extension Rod

Specifications: Condition: 100% Brand New Material: Alloy Surface: Chrome plated Color: Black + Red Optional Type: 3/8in Socket Diameter: 8,9,10,11,12,13,14, 17,19,21mm Extension Rod Length: 15.2cm / 5.98in Total Length: 19.7cm / 7.76in Weight: approx. 455~1437g Package Included: 1 x Ratchet Wrench 1 x Extension Rod 10 x Sockets Note: 1. Please allow 0-2cm error due to manual measurement. Thanks for your understanding. 2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

  • Color: Black + Red
  • Brand: FTVOGUE
  • ASIN: B07H9SC5TL
  • UPC: 791380163316

10mm I.D. Drill Size x 15mm O.D. x 25mm Lg. Metric Drill Bushing (1 Each)

10mm I.D. Drill Size x 15mm O.D. x

Dimensions are in millimeters. Other sizes available as special order. Call for price and delivery.

  • Brand: RSC
  • ASIN: B002SI9RHO
Similar Metric Bushings Shopping Results