BBK 1707 Fuel Pressure Regulator - Fully Adjustable - CNC Machined Billet Aluminum - Direct Fit for Ford Mustang 5.0 And 302/351 EFI Applications

BBK 1707 Fuel Pressure Regulator - Fully Adjustable

BBK Billet Adjustable Fuel Pressure Regulator for Ford 4.6/5.0L are a great way to tune the vehicle to obtain optimum air / fuel ratios and achieve maximum horsepower. Each fuel pressure regulator is made from high quality CNC machined billet aluminum with a long lasting anodized blue finish. Each fuel pressure regulator is hand assembled with a precision leak free diaphragm that will allow fuel pressure adjustment to approximately 65 PSI. These BBK fuel pressure regulators are direct replacements for the stock pre set regulator and offer the best performance and value.

  • Brand: BBK Performance
  • ASIN: B000CINAPW
  • UPC: 197975017079

BBK 1706 Fuel Pressure Regulator - Fully Adjustable - CNC Machined Billet Aluminum - Direct Fit for Ford Mustang 5.0 And 302/351 EFI Applications

BBK 1706 Fuel Pressure Regulator - Fully Adjustable

BBK Billet Adjustable Fuel Pressure Regulator for Ford 302/351 are a great way to tune the vehicle to obtain optimum air / fuel ratios and achieve maximum horsepower. Each fuel pressure regulator is made from high quality CNC machined billet aluminum with a long lasting anodized blue finish. Each fuel pressure regulator is hand assembled with a precision leak free diaphragm that will allow fuel pressure adjustment to approximately 65 PSI. These BBK fuel pressure regulators are direct replacements for the stock pre set regulator and offer the best performance and value.

  • Brand: BBK Performance
  • ASIN: B000CINAPM
  • UPC: 197975017062

BBK 2525 Caster Camber Alignment Kit for Ford Mustang - CNC Machined Billet Aluminum With Clean Anodized Finish

BBK 2525 Caster Camber Alignment Kit for Ford

BBK Polished Aluminum Caster/Camber Kit for Ford Mustang features the use of caster camber plates. These high quality BBK CNC polished billet aluminum Mustang caster camber plates are available to fit all 1979-1993 and 1994-2004 Ford Mustangs. These BBK caster camber plates will allow for the correction of the front end alignment to prevent premature tire wear. Most important of all they will allow for the adjustment of the caster and camber of the front struts to considerably improve the way the car will turn into corners flatter. It will considerably be more responsive to steering input overall.

  • Color: Regular
  • Brand: BBK Performance
  • ASIN: B000CINB1K
  • UPC: 197975025258

BBK 2527 Caster Camber Alignment Kit for Ford Mustang - CNC Machined Billet Aluminum With Clean Anodized Finish

BBK 2527 Caster Camber Alignment Kit for Ford

BBK Polished Aluminum Caster/Camber Kit for Ford Mustang GT-V6 features the use of caster camber plates. These high quality BBK CNC polished billet aluminum Mustang caster camber plates are available to fit all 1979-1993 and 1994-2004 Ford Mustangs. These BBK caster camber plates will allow for the correction of the front end alignment to prevent premature tire wear. Most important of all they will allow for the adjustment of the caster and camber of the front struts to considerably improve the way the car will turn into corners flatter. It will considerably be more responsive to steering input overall.

  • Color: Clear Anodized
  • Brand: BBK Performance
  • ASIN: B000CITDJE
  • UPC: 197975025272

BBK 1559 Underdrive Pulley Kit for Ford Mustang 4.6/ GT - 3 Piece Lightweight CNC Machined Aluminum Kit

BBK 1559 Underdrive Pulley Kit for Ford Mustang

BBK Aluminum Under drive Pulley Kit for Ford Mustang GT/Cobra 4.6L - 3 Piece is made from aircraft quality aluminum alloy. These BBK under drive front accessory pulley kits are one of the easiest ways to free up an average of 8-15 horsepower in under 30 minutes. These BBK pulley kits are designed as direct bolt on replacements for the current factory pulleys and retain full cooling and charging characteristics.

  • Brand: BBK Performance
  • ASIN: B000CIR9ZY
  • UPC: 197975015594

BBK 1619 Underdrive Pulley Kit For Ford Mustang 3.8L-V6 - 2 Pc CNC Machined Lightweight Aluminum - Crank And Alternator

BBK 1619 Underdrive Pulley Kit For Ford Mustang

BBK Aluminum Under drive Crank Pulley for Ford Mustang 3.8L-V6 is made from aircraft quality aluminum alloy. These BBK under drive front accessory pulley kits are one of the easiest ways to free up an average of 8-15 horsepower in under 30 minutes. These BBK pulley kits are designed as direct bolt on replacements for the current factory pulleys and retain full cooling and charging characteristics.

  • Brand: BBK Performance
  • ASIN: B000CIRA1W
  • UPC: 197975016195

BBK 1555 Underdrive Pulley Kit for Ford Mustang 4.6/ GT/Cobra - 3 Piece Lightweight CNC Machined Aluminum Kit

BBK 1555 Underdrive Pulley Kit for Ford Mustang

BBK Aluminum Under drive Pulley Kit for Ford Mustang GT/Cobra 4.6L - 3 Piece is made from aircraft quality aluminum alloy. These BBK under drive front accessory pulley kits are one of the easiest ways to free up an average of 8-15 horsepower in under 30 minutes. These BBK pulley kits are designed as direct bolt on replacements for the current factory pulleys and retain full cooling and charging characteristics.

  • Brand: BBK Performance
  • ASIN: B000CIR9ZE
  • UPC: 197975015556

BBK 1554 Underdrive Pulley Kit for Ford Mustang 5.0L - 3 Piece Lightweight CNC Machined Aluminum Kit

BBK 1554 Underdrive Pulley Kit for Ford Mustang

BBK Aluminum Under drive Pulley Kit for Ford Mustang 5.0L - 3 Piece features BBK pulley kits. They are designed as direct bolt on replacements for the current factory pulleys and retain full cooling and charging characteristics. They are made from aircraft quality machined steel or aluminum alloy. These BBK under drive front accessory pulley kits are one of the easiest ways to free up an average 8-15 horsepower in under 30 minutes.

  • Brand: BBK Performance
  • ASIN: B000CIR9Z4
  • UPC: 197975015549

2011-2014 Mustang ROUSH Engraved Polished Strut Tower Caps 10pc Set 421328

2011-2014 Mustang ROUSH Engraved Polished Strut Tower Caps

Dress up the engine compartment of your 2011-2014 Mustang with the Polished ROUSH Strut Tower Cap Kit. These caps are made from high quality billet aluminum for its appearance, corrosion resistance, and strength- to-weight ratio. They are manufactured in the USA using high precision CNC machining for precise fitment. Once machined, they are polished for a sharp look. These caps thread onto existing bolts on your strut towers for easy and secure installation.

  • Brand: Yates Performance
  • ASIN: B06XCSVCYY

BBK 1653 Underdrive Pulley Kit for Ford Mustang 4.6L-3V GT - SFI Approved Crank Pulley - CNC Machined Lightweight Aluminum WP

BBK 1653 Underdrive Pulley Kit for Ford Mustang

BBK SFI Under drive Pulley Kit for Ford Mustang 4.6L-3V GT - 2 Piece features SFI approved performance pulley kits with a SFI approved steel crank damper. It is built from high quality CNC machined aluminum. Each steel BBK kit is designed as a direct bolt on to replace the stock pulleys that rob the engine of horsepower. Each SFI pulley kit is designed specifically for each vehicle. This pulley kit for the 2005-2010 Mustang GT is designed as a 2 piece kit. As with the traditional pulley systems the horsepower gains are approximately 9-12 rear wheel horsepower. It is a result of the reduced drag which also helps with overall fuel economy. As with all BBK parts these SFI approved pulley kits offer BBK's distinctive quality that guarantees many years of top performance. The crank pulley is a steel SFI one piece replacement. Additional pulleys are CNC Aluminum.

  • Brand: BBK Performance
  • ASIN: B002CZB4V0
  • UPC: 197975016539

BBK 1553 Underdrive Pulley Kit for Ford Mustang 5.0L - 3 Piece Lightweight CNC Machined Aluminum Kit

BBK 1553 Underdrive Pulley Kit for Ford Mustang

BBK Aluminum Under drive Pulley Kit for Ford Mustang 5.0L - 3 Piece features BBK under drive front accessory pulley kits. They are one of the easiest ways to free up an average 8-15 horsepower in under 30 minutes. These BBK pulley kits are designed as direct bolt on replacements for the current factory pulleys and retain full cooling and charging characteristics.

  • Brand: BBK Performance
  • ASIN: B000CITD0S
  • UPC: 197975015532

(4) 50mm (2") 5x4.5 to 5x4.5 Black Wheel Spacers fits Ford Mustang Edge Ranger Explorer

(4) 50mm (2") 5x4.5 to 5x4.5 Black Wheel

THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES 1967-2014 Ford Mustang 2007-2014 Ford Edge 2003-2004 Ford Mach 1 1991-2011 Ford Crown Victoria 1982-1990 Ford Bronco (Does not fit XLT Model) 1981-2011 Ford Ranger 1991-2015 Ford Explorer ADDITIONAL INFORMATION Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle Installation needs to be performed by a trained professional It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options: Your lugs studs will need to be shortened by grinding them down You can replace your studs will shorter studs if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush) ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS

  • Brand: Titan Wheel Accessories
  • ASIN: B01C92KI9O
  • UPC: 753677230200

4pcs Jeep 2" inch (50mm) 5x4.5 Black Wheel Spacers for Wrangler TJ, YJ, XJ, KJ, KK, ZJ, MJ

4pcs Jeep 2" inch (50mm) 5x4.5 Black Wheel

THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES 1984-2001 JEEP CHEROKEE 1986-1992 Jeep Comanche 2002-2012 JEEP LIBERTY 1986-1993 Jeep Grand Cherokee 1987-2006 JEEP WRANGLER ADDITIONAL INFORMATION Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle Installation needs to be performed by a trained professional It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options: Your lugs studs will need to be shortened by grinding them down You can replace your studs will shorter studs if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush) ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS

  • Brand: Titan Wheel Accessories
  • ASIN: B01C92KKZG
  • UPC: 753677230224

BlackPath - Fits 1979-2004 Ford Mustang Rear End Upper Control Arm Bushing Kit Spherical Bearing Bushing Kit for 8.8" Axle (Polished) T6 Billet

BlackPath - Fits 1979-2004 Ford Mustang Rear End

Compatibility» Fits 1979-2004 Ford Mustang w/ 8.8" Rear AxleProduct Specifications» Designed to allow more movement with the upper and lower control arm under load» Spherical bearings allow full movement to prevent axle bind and allow smooth axle travel» CNC Machined from T6 Billet Aluminum for a perfect fitment with Heavy-Duty spherical bearings» Anodized surface for a Corrosion & Oxidation Resistant finishContents» 2x Spherical Upper Control Arm Bushings» Installation Hardware and Instructions» 1x Drive Your Way Keychain TagDetailed FeaturesBlack Path's Spherical Upper Control Arm Bushings will allow more movement with the upper and lower control arm under load. Our Bushings are designed to replace worn out, limiting factory bushings perfect for drag racing applications and anyone looking to improve the ride of their Mustang. Spherical bearings provide a smooth pivoting point to eliminate bind allowing control arms and rear-end their entire range of motion. Prevents axle bind and allows your rear wheels to find traction faster under hard acceleration. Installs easily onto upper control arm. CNC Machined from 6061 Aircraft Aluminum with Heavy-Duty spherical bearings. The surface of our Bushings is Anodized for a Corrosion & Oxidation Resistant finish.We take pride in our...

  • Color: Polished
  • Brand: Black Path
  • ASIN: B00TJANWTS

EZAccessory 2 Wheel Adapter 5x4.5 to 8x6.5 (5x114.3 to 8x165) Thickness 2 inch

EZAccessory 2 Wheel Adapter 5x4.5 to 8x6.5 (5x114.3

Product Information: These two piece conversion type wheel adapters are used to convert 5 lug vehicle with 4.5" (114.3mm) bolt pattern to fit wheels with 8x6.5 (165.1mm) bolt pattern. Mostly used for 5 lug Ford Mustang, GT, etc to install 8 lug Chevy wheels. They will also space out your wheels for 2-inch to help you get enough clearance for wider tires and rims. CNC machined with precision craftsmanship using 6061 T6 aerospace quality billet, featured in high load capacity and corrosion resistance. High quality studs are pre-installed. Sold as a pair for 2 wheels. Order 2 pairs for all 4 wheels. Adapter Specification: Vehicle Bolt Pattern: 5x4.5" (114.3mm) Wheel Bolt Pattern: 8x6.5" (165.1mm) Studs Thread Size: 14x1.5 Hub Bore Size: 73mm Thickness: 2-inch (50mm) Lug Torque: 95 ft-lbs Black Allen Bolt Torque: 55 ft-lbs Installation Notes: Unscrew and separate the two adapter pieces first. Install the inner adapter piece using short open end lug nuts with no more than 13/16" hex. If hub studs protrude outside the inner adapter piece and prevent the outer adapter piece from sitting flush, it is required to shorten the factory studs. Bolt outer adapter piece to the inner piece using provided black allen bolts. Install your wheels to the studs of the outer adapter piece using...

  • Brand: ezaccessory
  • ASIN: B008L3YKOU
  • UPC: 817679010632

UPR Mustang Billet Smog Pump Eliminator

UPR Mustang Billet Smog Pump

Free up horsepower and replace your worn out smog pump with UPR's Smog-Air Pump Eliminator Kit. This kit features a heavy duty high rpm press fit bearing with double seals, heavy duty hardware and snap ring to avoid failures, that all our competitors smog pumps have, time and time again. Only the UPR Smog Pump Eliminator Kit will keep you on the road or in the race every time. This new kit has the best manufactured components with unmatchable quality and performance and offering the strongest design available anywhere. Includes everything for a fast easy installation with nothing else to buy. Maintains factory belt length and works with all supercharged applications. Installs in 30 minutes or less. Fits these Vehilces: 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 GT LX V8 302 Cobra Mustang Steeda Roush & Saleen Vehicles.

  • Brand: UPR Products
  • ASIN: B00HZ4HI0Y

Kei Project Billet Aluminum Cigarette lighter plug delete Universal fitment Fits most (Eject)

Kei Project Billet Aluminum Cigarette lighter plug delete

  • Color: Eject
  • Brand: Kei Project
  • ASIN: B07D538556

4 Wheel Adapters 5 Lug 4.5" to 8 Lug 6.5"

4 Wheel Adapters 5 Lug 4.5" to 8

Product Information: These two piece conversion type wheel adapters are used to convert 5 lug vehicle with 4.5" (114.3mm) bolt pattern to fit wheels with 8 lug 6.5" (165.1mm) bolt pattern. Mostly used for 5 lug Ford Mustang, GT, etc to install 8 lug Chevy wheels. They will also space out your wheels for 2-inch to help you get enough clearance for wider tires and rims. CNC machined with precision craftsmanship using 6061 T6 aerospace quality billet, featured in high load capacity and corrosion resistance. High quality studs are pre-installed. Sold as a set of 4 for all four wheels Adapter Specification: Vehicle Bolt Pattern: 5x4.5" (114.3mm) Wheel Bolt Pattern: 8x6.5" (165.1mm) Studs Thread Size: 14x1.5 Hub Bore Size: 73mm Thickness: 2-inch (50mm) Lug Torque: 95 ft-lbs Black Allen Bolt Torque: 55 ft-lbs Installation Notes: Unscrew and separate the two adapter pieces first. Install the inner adapter piece using short open end lug nuts with no more than 13/16" hex. If hub studs protrude outside the inner adapter piece and prevent the outer adapter piece from sitting flush, it is required to shorten the factory studs. Bolt outer adapter piece to the inner piece using provided black allen bolts. Install your wheels to the studs of the outer adapter piece using proper lug nuts ...

  • Brand: ezaccessory
  • ASIN: B07B1S19CH
  • UPC: 849277024094

EZAccessory 2 Wheel Adapter 6x5.5 to 5x4.5 (6x139.7 to 5x114.3) Thickness 2 inch

EZAccessory 2 Wheel Adapter 6x5.5 to 5x4.5 (6x139.7

Product Information: These two piece conversion type wheel adapters are used to convert 6 lug vehicle with 5.5" (139.7mm) bolt pattern to fit wheels with 5x4.5 (114.3mm) bolt pattern. Mostly use for 6 lug Chevy Tahoe, Suburban, etc to install 5 lug Chevy Mustang, etc wheels. They will also space out your wheels for 2-inch to help you get enough clearance for wider tires and rims. CNC machined with precision craftsmanship using 6061 T6 aerospace quality billet, featured in high load capacity and corrosion resistance. High quality studs are pre-installed. Sold as a pair for 2 wheels. Order 2 pairs for all 4 wheels. Adapter Specification: Vehicle Bolt Pattern: 6x5.5" (139.7mm) Wheel Bolt Pattern: 5x4.5" (114.3mm) Studs Thread Size: 1/2"-20 Hub Bore Size: 108mm Thickness: 2-inch (50mm) Lug Torque: 85 ft-lbs Black Allen Bolt Torque: 55 ft-lbs Installation Notes: Unscrew and separate the two adapter pieces first. Install the inner adapter piece using short open end lug nuts with no more than 13/16" hex. If hub studs protrude outside the inner adapter piece and prevent the outer adapter piece from sitting flush, it is required to shorten the factory studs. Bolt outer adapter piece to the inner piece using provided black allen bolts. Install your wheels to the studs of the outer ...

  • Brand: ezaccessory
  • ASIN: B008L4NAFE
  • UPC: 817679011103

PerTronix D130700 Flame-Thrower Plug and Play Vacuum Advance Black Cap Billet Electronic Distributor with Ignitor II Technology for Ford Small Block

PerTronix D130700 Flame-Thrower Plug and Play Vacuum Advance

Plug n’ Play billet I2 distributors are designed for maximum ignition performance at a price you can afford. Our distributors ship with Ignitor II technology modules. Replace your outdated points, electronic distributor or bulky HEIs with this performance proven system. Simply install the distributor in the engine, connect two wires and start it up. For even more performance, consider adding one of our compatible Flame-Thrower II coils for increased spark energy and higher RPM potential. The lineup includes the Flame-Thrower II canister style coils as well as our New HC and HV E-core style coils.

  • Brand: Pertronix
  • ASIN: B001CMX4GM
  • UPC: 694342012571

Pirate Mfg MU0056SC 2005-09 Mustang Chrome Billet Interior Door Lock Pocket, PR

Pirate Mfg MU0056SC 2005-09 Mustang Chrome Billet Interior

Another great way to trick out the interior of your Mustang is with our new smooth chrome plated Billet Door Lock Pockets. Machined from solid 6061-T6 billet aluminum then polished and triple chrome plated our pockets replace the factory plastic pocket in minutes. Installation instructions included. These will fit 05-09 Ford Mustang models perfectly. CNC Machined From Billet Aluminum Triple Chrome Plated Fits 2005-2009 Mustang Replaces Stock Plastic Door Lock Pockets Simple To Install

  • Color: Metallic
  • Brand: Pirate Mfg
  • ASIN: B008YM45HA

Pirate MU0009SC 2005-09 Mustang Chrome Billet Auto Trans. Handle Shrouds

Pirate MU0009SC 2005-09 Mustang Chrome Billet Auto Trans.

2005-2009 Ford Mustang Chrome Plated Billet Aluminum Auto Trans Handle Shrouds. Machined from solid billet aluminum and show chrome plated. Comes with set screws to hold in place. Complete 2-piece set. Fits Ford Mustang 2005-2009, all models with auto trans. CNC Machined From Billet Aluminum Triple Chrome Plated Fits 2005-2009 Mustangs Simple To Install Complete 2-Piece Set

  • Brand: Pirate Mfg
  • ASIN: B0061RGI16

Putco 250010W Optic 360 H10 High Power LED Fog Lamp Bulb - Pack of 2

Putco 250010W Optic 360 H10 High Power LED

Putco's Optic 360 High Power LED Fog Lamp Bulb features high power 30 watt Cree LEDs, which offer over 600 lumen output and over 50,000 hours of lifetime, with DC 12-24 voltage. The machined CNC billet aluminum with optic lens is sturdy and reliable, and features a 360 degree lamp angle.

  • Brand: Putco
  • ASIN: B00BZR3O46
  • UPC: 010536264524

Billet Wheel Adapter 5x4.5 to 5x5.5 Thickness 2 Inch - Pair

Billet Wheel Adapter 5x4.5 to 5x5.5 Thickness 2

Product Information: The wheel adapter set is used to convert 5 lug 4.5-inch (114.3mm) hub bolt pattern to fit 5x5.5 (139.7mm) bolt pattern wheels. They will also space out your wheels for 2 inch to help your get enough clearance for wider tires and rims. CNC machined with precision craftsmanship using 6061 T6 aircraft quality billet, featured in high load capacity and corrosion resistance. High quality studs are pre-installed and 1/2"-20 thread size mounting open end lug nuts are included. Sold as a pair for 2 wheels. Order 2 pairs for all 4 wheels. Vehicle Side Fitments: Ford Mustang 1994-on Ford Cobra 1997-on Ford Explorer 1990-on Ford Ranger 1981-on Ford Bronco II 1982-1990 Ford Full Size (Galaxie, T-Bird, etc) 1952-1972 Ford Probe 1988-1997 Jeep Wrangler 1980-on Jeep Cherokee 1980-on Jeep Grand Cherokee 1993-1998 Jeep Liberty 2002-on Acura 3.2 Cl V-6 1998-on Acura Legend 1991-on Acura RSX, MDX 2001-on Acura NSX 1991-on Acura TL 3.2 1996-on Honda Accord 2003-on Honda Accord V-6 1998-on Honda S2000 1999-on Honda Pilot, Element 2003-on Honda CR-V 1997-on Honda Odyssey 1995-on Infiniti G35 2003-on Infiniti M45 2003-on Infiniti Q45 1990-on Toyota Avalon 1995-on Toyota Camry 1992-on Toyota Solara 1999-on Toyota Highlander 2001-on Toyota Rav4 1996-on Toyota Sienna 1997-on A...

  • Brand: ezaccessory
  • ASIN: B01NH9Z2O6
  • UPC: 849277029778

Steadfast Auto 10043 Ford Compatible Billet Aluminum A/C Knobs Chrome, Replacement For Ford Mustang New Edge

Steadfast Auto 10043 Ford Compatible Billet Aluminum A/C

Designed to replace the boring stock plastic A/C controls of your vehicle, Steadfast Auto's Billet Aluminum HVAC Knobs are an exciting addition to your car or truck's interior. This easy to install kit includes three replacement knobs designed to perfectly replace the Fan Speed, Temperature, and AC/Heat/Vent/Defrost selector controls in your vehicle. At Steadfast Auto, corners are never cut. These HVAC Knobs are Precision Machined on a Professional CNC Machine out of solid 6061 Billet Aluminum and then Triple Chrome Plated for a durable and long-lasting finish. Steadfast Auto's minimalist approach to packaging design is not only environmentally responsible, but also reduces final product cost to you without compromising the product itself. An industry leading Full 1 Year Warranty against defect in the product shows Steadfast Auto's commitment to product excellence. What this means to you is that Steadfast Auto's HVAC Knobs are the absolute best you can buy for your vehicle with no compromise!

  • Color: Chrome
  • Brand: Steadfast Auto
  • ASIN: B00P8AMQO0

Vincos Universal 3/8"&9/16" 400ml Aluminum Oil Catch Can Dual Cylinder Polish Baffled Engine Air Oil Separator Tank Reservoir Kit with Breather Black Small Drain

Vincos Universal 3/8"&9/16" 400ml Aluminum Oil Catch Can

Specifications: Material: Aluminum Canister Dimensions: 5" Height x 3.25" Diameter Inlet / Outlet Diameter: 3/8" & 9/16" Hose Adapters Placement on Vehicle: Front, Left, Right Warranty: One year unlimited miles Package Includes: 1 x Oil Catch Can 1 x Air Filter 1x Hose Accessories as Shown in the Picture Feature This is brand new high quality construction oil catch can & accessories and well packed in box. Using high-quality materials to ensure reliability and durability of product. Easy to clean, empty and maintain, visual fluid level shows when to empty the catch tank It will remove carbon and sludge build-up in the intake system, prolong engine longevity, increase engine performance.

  • Color: Universal Oil Catch Can
  • Brand: Vincos
  • ASIN: B076BKV7JF

Billet Aluminum Optima Battery Tray (Group 34/78) - Textured Black Powder Coat - SMOOTH TOP TRAY

Billet Aluminum Optima Battery Tray (Group 34/78) -

Upgrade your car, boat or hot rod with this CNC billet aluminum battery tray! Intended for an OPTIMA Group 34/78 Battery ONLY. ***Please contact us prior to making a purchase if you have ANY questions about fitment.*** Billet Proof Designs battery trays are machined from 6061-T6 aluminum and powder coated with a durable semi-gloss textured black finish to add some style to your 4x4. Upper and lower battery trays are machined from 5/16" thick plate and pocketed to keep the battery securely in position.  Each standoff is made from 1/2" diameter aluminum tubing and threaded at both ends. Stainless steel assembly hardware included. Dimensions of pocket that houses battery:  Length = 10 "  Width = 6 13/16"  Height = 6 3/4". *Battery Tray Only - Accommodates (4) post GROUP 34/78 "Yellow, Red and Blue Top" Optima Batteries as well as any battery that fits within the listed dimensions. Some fabrication/drilling may be required. Why Powder Coat? Our powder coat has undergone 2000 hr. salt spray tests to ensure a long lasting finish in harsh environments. *Please note that the color of the top has NOTHING to do with the battery case size and design. You have to make sure that you have the correct group. This is displayed on the battery itself. *Please note that these battery trays...

  • Brand: Billet Proof Designs
  • ASIN: B012P7FS02

UPR 1979-1995 Mustang Billet Distributor Hold Down Kit

UPR 1979-1995 Mustang Billet Distributor Hold Down

UPR Products Billet Distributor Hold Down Kit fits all 2.3L, 6cyl, 302, 351 Small Block Ford motors. Features 65% more clamping pressure as well as adding great looks to your engine. CNC Machined from 6061 Billet Aluminum for a perfect fit including the Diamond cutter final pass giving it the best finish possible. Installs in 5 minutes or less supplied hardware. Fits these Vehicles: 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 V8 V6 4cyl 2.3L GT LX Cobra Mustang Steeda Roush & Saleen Vehicles.

  • Brand: UPR Products
  • ASIN: B00HV11HOO

Assault Racing Products 1030213 for Small Block Ford HEI Ignition Blue Cap Distributor with 50K Coil Small Block SBF 260 289 302

Assault Racing Products 1030213 for Small Block Ford

This is a new HEI Distributor for small block Ford. Applications included: 221, 260, 289, and 302 V8's (does NOT fit the 351W). Fully CNC machined and polished billet aluminum housing with adjustable vacuum advance. Each distributor has a 50,000 volt ignition coil and high performance module to insure accurate and reliable firing to 7,500 RPM. True spark alignment for instant throttle response. Simple 1-wire hookup. This item is not recommended with the EFI to Carburetor swaps.

  • Color: Blue
  • Brand: Assault Racing Products
  • ASIN: B00S75G3BU

Steadfast Auto 10041 Ford Compatible Billet Aluminum A/C Knobs Chrome, Replacement For Ford Mustang Foxbody

Steadfast Auto 10041 Ford Compatible Billet Aluminum A/C

Designed to replace the boring stock plastic A/C controls of your vehicle, Steadfast Auto's Billet Aluminum HVAC Knobs are an exciting addition to your car or truck's interior. This easy to install kit includes three replacement knobs designed to perfectly replace the Fan Speed, Temperature, and AC/Heat/Vent/Defrost selector controls in your vehicle. At Steadfast Auto, corners are never cut. These HVAC Knobs are Precision Machined on a Professional CNC Machine out of solid 6061 Billet Aluminum and then Triple Chrome Plated for a durable and long-lasting finish. Steadfast Auto's minimalist approach to packaging design is not only environmentally responsible, but also reduces final product cost to you without compromising the product itself. An industry leading Full 1 Year Warranty against defect in the product shows Steadfast Auto's commitment to product excellence. What this means to you is that Steadfast Auto's HVAC Knobs are the absolute best you can buy for your vehicle with no compromise!

  • Color: Chrome
  • Brand: Steadfast Auto
  • ASIN: B00P8AMLMC

Yates Performance 2016-2018 Shelby GT350 Billet Emergency Brake Handle Cover

Yates Performance 2016-2018 Shelby GT350 Billet Emergency Brake

Emergency brake cover for the 2016-2018 Shelby GT-350.

  • Color: silver
  • Brand: Yates Performance
  • ASIN: B076MCDPP8

UPR 1979-2004 Mustang Billet Trick Stick Shifter Handle Arm

UPR 1979-2004 Mustang Billet Trick Stick Shifter Handle

UPR's T-7075 Billet Trick Stick Shifter Handle is the same light weight handle we offer with our Blu Thunder Shifters. Now available as an upgrade to your stock shifter or your aftermarket shifter for a shorter throw and light weight alternative to our competitors steel shift handles. When changing out the shift handle it's also a great time to upgrade to one of our Billet Shift Knobs. Our Quality & Finish will leave you with a grin from ear to ear as it is the Best looking and performing unit available for your Ford Mustang or Cobra. Quality Construction: Crafted from T-7075 Billet Aluminum and gun drilled to be as light as possible, while making sure it's as strong as possible. No one gives you the bold clean styling of our Aftermarket Dress Ups, Suspension and Performance Parts for your American Muscle Car like UPR Products! Installs in 10 minutes or less. Fits these Vehicles: 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 GT GTS LX Cobra Bullitt Mach 1 Mustang Steeda Roush & Saleen Vehicles. Made in the USA!

  • Brand: UPR Products
  • ASIN: B0011RBOYC

4pcs 1" inch (25mm) 5x4.5 Wheel Spacers fits Jeep Wrangler TJ, YJ, XJ, KJ, KK, ZJ, MJ

4pcs 1" inch (25mm) 5x4.5 Wheel Spacers fits

THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES 1984-2001 JEEP CHEROKEE 1986-1992 Jeep Comanche 2002-2012 JEEP LIBERTY 1986-1993 Jeep Grand Cherokee 1987-2006 JEEP WRANGLER ADDITIONAL INFORMATION Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle Installation needs to be performed by a trained professional It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options: Your lugs studs will need to be shortened by grinding them down You can replace your studs will shorter studs if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush) ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS

  • Brand: Titan Wheel Accessories
  • ASIN: B01C996G3E
  • UPC: 753677230309

MSD 8595 Pro-Billet Ready-to-Run Distributor

MSD 8595 Pro-Billet Ready-to-Run

MSD is excited to offer two ready-to-run distributors for two classic ford engines. These distributors are the answer to weak breaker points or rebuilt aftermarket models. Inside the billet housing there is a high-output ignition module. When the maintenance-free magnetic pick-up signals the module to fire, up to 7.5 A is sent to the coil where a powerful spark is created. This improved spark output results in quick starts, snappy throttle response and terrific drivability. The distributors are equipped with a vacuum advance canister for cruising economy. Plus, there is a mechanical advance assembly that is mounted on top of the distributor shaft making it easy to adjust the advance to meet your needs. Another great feature of the ready-to-run distributors is their simple installation. All you need to do is connect three wires and you'll be cruising.

  • Brand: MSD
  • ASIN: B000COUQXK
  • UPC: 085132085958

Dirty Dingo Adjustable Engine Swap Mounts LS Swap Fox Body Mustang w/ Stock K

Dirty Dingo Adjustable Engine Swap Mounts LS Swap

Dirty Dingo "Ford Upgrade" Fox Body LS1 swap conversion mounts. These billet aluminum adjustable mounts allow you to install late the model GM Gen III and Gen IV LS engines 1997-2013 into the 1979-93 Mustang using the stock front K member. No cutting or fabrication required. These conversion mounts allow 1 ½ inches of adjustment. Machined from 3/8 thick 6061-T6 billet aluminum. These are designed to be used with 1996-2004 Mustang 4.6 engine mounts, not included. All grade-8 zinc coated hardware included. - * Aftermarket transmission cross member required. - * LS Cadillac CTSV oil pan is required. - * Will not clear low mount A/C compressors. - * These mounts will clear low mount drivers side alternators, rear brace removed. - * All aftermarket LS Mustang headers designed to fit the factory K member will clear.

  • Color: Aluminum
  • Brand: Dirty Dingo Motorsports
  • ASIN: B016KPN956
  • UPC: 720825708010

Billet Wheel Adapter 5x4.5 to 5x4.75 Thickness 1.25 Inch - Pair

Billet Wheel Adapter 5x4.5 to 5x4.75 Thickness 1.25

Product Information: The wheel adapter set is used to convert 5 lug 4.5-inch (114.3mm) hub bolt pattern to fit 5x4.75 (120.65mm) bolt pattern wheels. They will also space out your wheels for 1.25 inch to help your get enough clearance for wider tires and rims. CNC machined with precision craftsmanship using 6061 T6 aircraft quality billet, featured in high load capacity and corrosion resistance. High quality studs are pre-installed and 1/2"-20 thread size mounting open end lug nuts are included. Sold as a pair for 2 wheels. Order 2 pairs for all 4 wheels. Vehicle Side Fitments: Ford Mustang 1994-on Ford Cobra 1997-on Ford Explorer 1990-on Ford Ranger 1981-on Ford Bronco II 1982-1990 Ford Full Size (Galaxie, T-Bird, etc) 1952-1972 Ford Probe 1988-1997 Jeep Wrangler 1980-on Jeep Cherokee 1980-on Jeep Grand Cherokee 1993-1998 Jeep Liberty 2002-on Acura 3.2 Cl V-6 1998-on Acura Legend 1991-on Acura RSX, MDX 2001-on Acura NSX 1991-on Acura TL 3.2 1996-on Honda Accord 2003-on Honda Accord V-6 1998-on Honda S2000 1999-on Honda Pilot, Element 2003-on Honda CR-V 1997-on Honda Odyssey 1995-on Infiniti G35 2003-on Infiniti M45 2003-on Infiniti Q45 1990-on Toyota Avalon 1995-on Toyota Camry 1992-on Toyota Solara 1999-on Toyota Highlander 2001-on Toyota Rav4 1996-on Toyota Sienna 1997...

  • Brand: ezaccessory
  • ASIN: B009AENTIC
  • UPC: 849277029655

J&M Products IRS Rear Vertical Links Bare Machined Finish With Delrin/Spherical Bushings Fits 2015-2019 Ford Mustang

J&M Products IRS Rear Vertical Links Bare Machined

J&M Products has designed and manufactured all new Mustang Billet Aluminum Vertical Links for the 2015-2018 Mustang S550 GT, EcoBoost and V6 constructed from aircraft grade 6061-T6511 aluminum. These all new Vertical Links feature precision machined delrin bushings along with spherical bearings for a hybrid/modular vertical link. They also incorporate CNC machined billet tapered reducer bushings for the perfect bolt-in fit. The use of our specially designed delrin bushings and spherical rod end bushings instead of standard bushings provides a vertical link that eliminates deflection and provides consistency in the rear suspension geometry under the most demanding conditions. Unique to these vertical links are the special built designed J&M Products modular concept.delrin bushings that are utilized at the subframe/suspension mounting locations where traditionally the bushings are made from synthetic elastomer or a polyurethane material. Available finishes are bare machined aluminum, red and black anodized. Delrin is a versatile engineering plastic with metal-like properties, they include high strength; stiffness; fatigue endurance; moisture, gasoline, solvent, and chemical resistance; excellent dimensional stability; and a wide temp range. Another benefit of delrin is being a grea...

  • Brand: JM
  • ASIN: B074N9DHBT
  • UPC: 887753524904

Wheel Adapter 4 Lug 114.3mm to 5 Lug 114.3mm - Pair

Wheel Adapter 4 Lug 114.3mm to 5 Lug

Product Information: These two piece conversion type wheel adapters are used to convert 4 lug vehicle with 4.5" (114.3mm) bolt pattern to fit wheels with 5x4.5 (114.3mm) bolt pattern. Mostly used for 4 lug Ford Mustang, etc to install 5 lug Ford Mustang, etc wheels. They will also space out your wheels for 1.75-inch to help you get enough clearance for wider tires and rims. CNC machined with precision craftsmanship using 6061 T6 aerospace quality billet, featured in high load capacity and corrosion resistance. High quality studs are pre-installed. Sold as a pair for 2 wheels. Order 2 pairs for all 4 wheels. Adapter Specification: Vehicle Bolt Pattern: 4x4.5" (114.3mm) Wheel Bolt Pattern: 5x4.5" (114.3mm) Studs Thread Size: 1/2"-20 Hub Bore Size: 78mm Thickness: 1.75-inch (45mm) Lug Torque: 85 ft-lbs Black Allen Bolt Torque: 55 ft-lbs Installation Notes: Unscrew and separate the two adapter pieces first. Install the inner adapter piece using short open end lug nuts with no more than 13/16" hex. If hub studs protrude outside the inner adapter piece and prevent the outer adapter piece from sitting flush, it is required to shorten the factory studs. Bolt outer adapter piece to the inner piece using provided black allen bolts. Install your wheels to the studs of the outer adap...

  • Brand: ezaccessory
  • ASIN: B008L2HK7U
  • UPC: 817679010199

VMS Racing CHROME Engine Oil DIPSTICK HANDLE in Billet Aluminum Compatible with FORD MUSTANG 99-17 1999-2017 GT GT500 4.6L 5.0L 5.4L

VMS Racing CHROME Engine Oil DIPSTICK HANDLE in

This VMS Racing CNC Machined T6061 Billet Aluminum Oil Dipstick Handle with Vitton O-rings will fit the Ford Mustang 4.6L, 5.0L and 5.4L engines. It will easily installs in minutes without the need of any specialty tools. You simply slide out the retaining pin on the Ford OEM plastic handle using the pin removal tool that is included. Replace the old handle with the new VMS Oil Dipstick handle and slide the NEW PIN that is provided in the kit. Everything you need to make this upgrade easy in included. This is a great piece for anyone looking to enhance the look of their engine compartment without spending a lot of money. You can now replace that ugly yellow handle that is missing, cracked, broken or plain ugly with this beautiful VMS Racing Billet Aluminum Oil Dipstick handle. Installation Skill level required = Easy Peasy Lemon Squeezy.

  • Brand: VMS Racing
  • ASIN: B077N5BKVK
  • UPC: 797132206386

BlackPath - Fits Ford Mustang + F150 + F250 + F350 + PT Cruiser + SRT4 Billet Short Radio Antenna Ford + Chrysler Stubby (Black) T6 Billet

BlackPath - Fits Ford Mustang + F150 +

Short antenna (mast only) for the 1979-2009 Ford Mustang, 1980-2008 Ford F150/F250/F350, and 2001-2010 Chrysler PT Cruiser. Only fits Ford Mustang models with a Factory 28" Fixed Antenna (will not work on the motorized antenna). Will not fit Ford 2009+ models. Super high quality. CNC machined from billet T6061 aluminum and then powdercoated gloss black for a long lasting finish. Visible part of the antenna measures 3.5" installed. Looks great. Satisfaction guaranteed or your money back.

  • Color: Black
  • Brand: Black Path
  • ASIN: B00TT7NWL4
Similar Mustang Billet Cnc Machined Shopping Results