Stant 45358 SuperStat Thermostat - 180 Degrees Fahrenheit

Stant 45358 SuperStat Thermostat - 180 Degrees

The Stant SuperStat Themostat out performs the Original Equipment themostat. Unlike the OE themostats that continually open and close to achieve the proper operation temperature and flood the engine with coolant, the Stant SuperStat has a patented V-notch, non linear design that reduces cycling by precisely metering the amount of coolant needed. the V-notch provides a small initial flow. As the engine heats up, the V-notches gradually open wider, metering coolant released into the system until the desired engine temperture is reached. The benefits of proper engine temperature control are: efficient engine operation, prolonged engine life, reduced oil consumption, improved fuel economy and improved emmisions. The SuperStat uses a high flow venturi for maximum cooling capacity during high temperature high load operation, and employes a patented Weir Valve, for percision flow metering during cold weather light load operation, to ensure stable temperature control under all conditions.The power element of the SuperStat is comparable to those used in the heavy duty trucking industry. It employs an actuator piston that is 25% larger than our standard themostat and 55% larger than competitive products. This larger heavy piston duty delivers one and one half times as much power as competi...

  • Brand: Stant
  • ASIN: B000C848Q2
  • UPC: 033342110700

New Carburetor Two 2 Barrel Carburetor Carb 2100 For Ford 289 302 351 Cu Jeep Engine

New Carburetor Two 2 Barrel Carburetor Carb 2100

This item is a brand new Carburetor.  It will fit the following makes and models:1964-1978 Jeep Wagoneer 360 Cu 5.9L1968-1973 Ford Mustang 289 Cu 302 Cu 351 Cu 4.7L 5.0L 5.8L1964-1978 Ford 100 289 Cu 302 Cu 351 Cu 4.7L 5.0L 5.8L1964-1978 Ford F250 289 Cu 302 Cu 351 Cu 4.7L 5.0L 5.8L1964-1979 Ford F350 289 Cu 302 Cu 351 Cu 4.7L 5.0L 5.8L1964-1982 Mercury Comet 289 Cu 302 Cu 351 Cu 4.7L 5.0L 5.8L 

  • Brand: Auto Parts Prodigy
  • ASIN: B077HQP51S

ATP Automotive Graywerks 103004 Engine Timing Cover

ATP Automotive Graywerks 103004 Engine Timing

ATP Graywerks Timing Covers are a high quality OE replacement alternative. All covers are developed to originally specified designs, for a proper fit. The parts are manufactured either from high quality plastic or metal, providing a durable and long lasting replacement. Each timing cover includes the components necessary for a smooth install. ATP Timing Covers are backed by a Limited Lifetime Warranty.

  • Brand: ATP Automotive
  • ASIN: B000C8P8XO
  • UPC: 740993035756

RT-TCZ Engine Start/Stop Button Center Console Dashboard Button Switch Button Cover Trim for Ford Mustang 2015 2016 2017 (Carbon fiber veins)

RT-TCZ Engine Start/Stop Button Center Console Dashboard Button

This engine button cover is designed in attractive carbon fiber veins top with black ring, adding some pizzazz to the car interior. And it prevents the original button from scratching to keep it new. Creative and stylish engine button cover is sure to give your Ford Mustang personality! Easy installation - You can install this engine button cover by yourself! clean the surface area of engine button housing and keep dry Peel off the back side 3M tape and align properly on the original button position Use a clean cloth to apply pressure to adhesive and complete the installationCompatible with: Ford Mustang 2015 2106 2017SpecificationsCondition: 100% newColor: Carbon fiber veinsMaterial: High Quality ABS MaterialPackage Included: 1 x Button Cover TrimWorry-Free Warranty

  • Color: Button Cover Trim-Carbon
  • Brand: RT-TCZ
  • ASIN: B07BLWSRZ5

MAPM - MUSTANG 13-14 ENGINE SPLASH SHIELD, Under Cover/Stone Deflector, Base/(GT-w/o California Edition) Models - FO1228130 FOR 2013-2014 Ford Mustang

MAPM - MUSTANG 13-14 ENGINE SPLASH SHIELD, Under

DESCRIPTIONMake Auto Parts Manufacturing Engine Cover for 2013 to 2014 Ford MustangPACKAGE INCLUDESSingle Engine CoverFITMENTFor 2013 to 2014 Ford Mustang

  • Color: FO1228130
  • Brand: Make Auto Parts Manufacturing
  • ASIN: B01MXPMPQ4
  • UPC: 767787087289

Spectre Performance 4232 Chrome Water Neck for Small Block Ford

Spectre Performance 4232 Chrome Water Neck for Small

Spectre’s Ford small block water neck fits 1965 - 19475 Ford 221, 289, 302 and 351W engines. This water neck has been designed around the OEM specifications and has a chrome plated finish for a lasting look that fits great. This water neck includes the bolts and sealing O-ring, and also features a 1/2 inch outside diameter by-pass hose connection.

  • Brand: Spectre Performance
  • ASIN: B000BPURAC
  • UPC: 089601423203

MAPM Front Car & Truck Splash Guards & Mud Flaps Plastic Engine under cover FO1228101 FOR 2005-2009 Ford Mustang

MAPM Front Car & Truck Splash Guards &

DESCRIPTIONMake Auto Parts Manufacturing Front Engine Cover for 2005 to 2009 Ford MustangPACKAGE INCLUDESSingle Engine Cover (Front)SPECIFICATIONSProduct fit - Direct FitRecommended use - OE ReplacementMaterial - PlasticLocation - FrontPartslink - FO1228101Replaces OEM number - 5R3Z17626BAFITMENTFor 2005 to 2009 Ford MustangNOTESEngine under cover

  • Color: FO1228101
  • Brand: Make Auto Parts Manufacturing
  • ASIN: B01N9VPFE1
  • UPC: 749531315763

Ignition Coil (Pack of 8) Curved Boot For Select Ford, Lincoln, Mercury 4.6L 5.4L V8 Engine - Replaces DG508 C1454 C1417 FD503

Ignition Coil (Pack of 8) Curved Boot For

Wether it is for your car, motorcycle, van UTV or RV's OxGord's automotive parts and accessories are designed and quality tested to ensure the right fit for your car -Universal or Car Specific

  • Brand: OxGord
  • ASIN: B01LBYSL36
  • UPC: 840345110503

Stant 45359 SuperStat Thermostat - 195 Degrees Fahrenheit

Stant 45359 SuperStat Thermostat - 195 Degrees

The Stant SuperStat Themostat out performs the Original Equipment themostat. Unlike the OE themostats that continually open and close to achieve the proper operation temperature and flood the engine with coolant, the Stant SuperStat has a patented V-notch, non linear design that reduces cycling by precisely metering the amount of coolant needed. the V-notch provides a small initial flow. As the engine heats up, the V-notches gradually open wider, metering coolant released into the system until the desired engine temperture is reached. The benefits of proper engine temperature control are: efficient engine operation, prolonged engine life, reduced oil consumption, improved fuel economy and improved emmisions. The SuperStat uses a high flow venturi for maximum cooling capacity during high temperature high load operation, and employes a patented Weir Valve, for percision flow metering during cold weather light load operation, to ensure stable temperature control under all conditions.The power element of the SuperStat is comparable to those used in the heavy duty trucking industry. It employs an actuator piston that is 25% larger than our standard themostat and 55% larger than competitive products. This larger heavy piston duty delivers one and one half times as much power as competi...

  • Brand: Stant
  • ASIN: B000C7YRNM
  • UPC: 033342031593

Go-Parts » 2015-2016 Ford Mustang Engine/Radiator Cooling Fan Assembly - (3.7L V6 Convertible + 5.0L V8 Convertible + 3.7L V6 Coupe + 5.0L V8 Coupe) Replacement FR3Z 8C607 A FO3115205

Go-Parts » 2015-2016 Ford Mustang Engine/Radiator Cooling Fan

OEM #FR3Z8C607AFITS:2015-2016 Mustang V6 Convertible 3.7L V62015-2016 Mustang GT Premium Convertible 5.0L V82015 Mustang GT Convertible 5.0L V82015-2016 Mustang V6 Coupe 3.7L V62015-2016 Mustang Base Coupe 3.7L V62015-2016 Mustang GT Coupe 5.0L V82015-2016 Mustang GT Premium Coupe 5.0L V82015 Mustang GT 50 Years Limited Edition Coupe 5.0L V82016 Mustang Base Convertible 3.7L V62016 Mustang Base Convertible 5.0L V82016 Mustang Base Coupe 5.0L V8NOTESAlternative Part #s: Keystone: FO3115205 PerfectFit: REPF160934 TYC: 623350 DEPO: 330-55066-000Fits Years: 2015 15 2016 16Fits Engines: 3.7L V6 5.0L V8PART INFO✔ Every light complies with U.S. Motor Vehicle Safety Standards (FMVSS-108) ✔ OEM design, guaranteed to fit just like original equipment✔ ISTA certified packaging to eliminate shipping damage✔ Direct bolt-on design - easy & convenient installation✔ All lights are brand new aftermarket products✔ Meets and exceeds OEM specifications✔ All lights are DOT/SAE certified✔ VTF (Vehicle Test Fit)

  • Brand: Go-Parts
  • ASIN: B07DV2BTZG

MAPM Front Car & Truck Splash Guards & Mud Flaps Plastic Engine under cover FO1228101 FOR 2005-2009 Ford Mustang

MAPM Front Car & Truck Splash Guards &

DESCRIPTIONMake Auto Parts Manufacturing Front Engine Cover for 2005 to 2009 Ford MustangPACKAGE INCLUDESSingle Engine Cover (Front)SPECIFICATIONSProduct fit - Direct FitRecommended use - OE ReplacementMaterial - PlasticLocation - FrontPartslink - FO1228101Replaces OEM number - 5R3Z17626BAFITMENTFor 2005 to 2009 Ford MustangNOTESEngine under cover

  • Color: FO1228101
  • Brand: Make Auto Parts Manufacturing
  • ASIN: B01N98ZPG8
  • UPC: 767787086992

THEBIGDEALS T001OBD OBD II Scanner Car Engine Fault Code Reader CAN Diagnostic Scan Tool OBD2 scanner

THEBIGDEALS T001OBD OBD II Scanner Car Engine Fault

  • Color: Red&Black
  • Brand: THEBIGDEALS
  • ASIN: B078WNNCXR
  • UPC: 798881148088

1999-2004 Mustang 4.6 Liter Engine Polished Stainless Steel Alternator Cover

1999-2004 Mustang 4.6 Liter Engine Polished Stainless Steel

Polished stainless steel alternator cover. Stainless steel is easy to clean and maintain.

  • Brand: Yates Performance
  • ASIN: B01NCUROA8

Stainless Steel Header Exhaust System Kit for 1964-1970 Ford Mustang V8 Engine

Stainless Steel Header Exhaust System Kit for 1964-1970

Fitment: Year Make Model Engine 1964-1965 Ford Mustang 4.3L 4261CC 260Cu. V8 1964-1968 Ford Mustang 4.7L 4727CC 289Cu. V8 1968-1970 Ford Mustang 5.0L 4949CC 302Cu. V8 Introductions: 1.5" Primary Tube, 2.5" Collector Package Includes: 1 Set of Header Exhaust System, Gasket(s) and Bolt(s) as shown in the Picture above (ALL if any is necessary for Installation)

  • Brand: MILLION PARTS
  • ASIN: B074TF78YJ

For Ford Mustang GT SVT Full Aluminum 3-row Racing Radiator - 4 Gen V6 V8 Automatic AT only

For Ford Mustang GT SVT Full Aluminum 3-row

Aluminum Racing Radiator is designed to provide maximum cooling efficiency to prevent premature engine failure. Its light-weight, and high-heat transferring aluminum features a tube and fin design that, dramatically increases surface area that enables the heat to dissipate more efficiently. This Racing Radiator is at least 40% more efficient than stock ones. Most importantly, it has a much higher capacity for coolant than stock ones, which means that your cooling system will be more efficient and will be more resistant to temperature surges in racing applications.Package Included:1 x RadiatorCompatible with:97-04 Ford Mustang AT

  • Brand: Auto Dynasty
  • ASIN: B00K33XB64

Spectre Performance 57235 Chrome Engine Oil Dipstick with O-Ring Grip Design Handle

Spectre Performance 57235 Chrome Engine Oil Dipstick with

Spectre’s gold iridite-plated finish Oil Dipsticks are available for a number of different vehicles and come in a variety of sizes. This replacement oil dipstick has a base made to OEM specifications and markings match OEM for true accuracy, ensuring optimum fit and function.

  • Brand: Spectre Performance
  • ASIN: B000BPZ4SM
  • UPC: 089601572352

NEW TK4090SKSI Timing Chain Kit, Cover Gasket Set, Front Oil Seal, & RTV Gasket Maker for Ford / Mazda / Mercury 4.0L (4015cc) 245cid SOHC V6 (12-Valve) Engine, Vin Code "E" "K" "N" 1997-11

NEW TK4090SKSI Timing Chain Kit, Cover Gasket Set,

Package Includes : 2 Timing Chain (jack shaft to cams 78 links) 1 Rear Jack Shaft Chain (crank to jack shaft 62 links) 1 Rear Cam Chain Tensioner 1 Front Cam Chain Tensioner 1 Jack Shaft Tensioner 1 Rear Cam Sprocket Right (25 teeth .461" hole) 1 Front Cam Sprocker Left (25 teeth .572" hole) 1 Front Jack Shaft Sprocket (20 teeth 1.102" hole) 1 Rear Jack Shaft Sprocket (20 teeth 1.102" hole) 1 Front Cam Chain Guide Rail 1 Rear Cam Chain Guide Rail 1 Jack Shaft Fixed Guide Rail 1 Balance Shaft Chain (62 links) 1 Balance Shaft Tensioner 1 Balance Shaft Fixed Guide Rail 1 Oil Line Restrictor 1 Timing Cover Gasket 1 Water Pump Mounting Gasket 1 Crankshaft Front Oil Seal 1 Crankshaft Rear Main Seal 2 Oil pump inlet tube Gaskets 1 RTV Hi-Temp Gasket Silicone Sealant Product Fitment For : 97 - 10 FORD EXPLORER 4.0L SOHC V6 12V, VIN CODE "E, K" 01 - 10 FORD EXPLORER SPORT TRAC 4.0L SOHC V6 12V, VIN CODE "E, K" 05 - 10 FORD MUSTANG 4.0L SOHC V6 12V, VIN CODE "N" 01 - 11 FORD RANGER 4.0L SOHC V6 12V, VIN CODE "E, K" 01 - 10 MAZDA B4000 4.0L SOHC V6 12V, VIN CODE "E, K" 98 - 10 MERCURY MOUNTAINEER 4.0L SOHC V6 12V, VIN CODE "E"

  • Brand: CNS EngineParts
  • ASIN: B00YHZ47O4

Eagle BHP 4332H Engine Motor Mount (Front Left or Right 3.7 4.6 5.0 5.4 L For Ford Mustang)

Eagle BHP 4332H Engine Motor Mount (Front Left

One Brand New Replacement Part High Quality and Performance : Engine Motor Mount Front Left or Right 3.7 4.6 5.0 5.4 L For Ford Mustang.

  • Brand: Eagle BHP
  • ASIN: B012DW4AF8
  • UPC: 841257121809

PROFessional Powertrain DF94 Ford 302 High Output Engine, Remanufactured

PROFessional Powertrain DF94 Ford 302 High Output Engine,

This engine is remanufactured using the most technically advanced methods - incorporating both CNC machining and DC torque equipment. All components are inspected to assure viability and then verified by Quality Control Personnel. All sub-assemblies and components are both pressure and vacuum tested prior to being installed. Once assembled, state of the art computer controlled pressure testing is performed as a final verification of casting integrity. Final testing is done with our proprietary “ProTester Max” at 600 RPM. If applicable both VVT (Variable Valve Timing) and DOD (Displacement on Demand) units are physically operated and 100% confirmed. Compression, oil pressure, oil flow and four, ninety degree stop and match readings are verified to assure your engine will meet or exceed your expectations. Fluorescent dye within the testing oil is used as a countermeasure to find any possible oil leaks, including the crankshaft rear seal. This state of the art testing far surpasses a “hot fire” engine. Engines come as long block assemblies that ship with a finishing gasket set and a new oil pump. We consider it a privilege to provide you with engine assemblies that we remanufacture with PRIDE!

  • Brand: PROFormance Powertrain
  • ASIN: B007CXCBXW
  • UPC: 653517016943

2 FORD RACING 12" BLUE Racing Vinyl Sticker Decals Ranger Mustang F150 Block Engine Emblem Parts Decal Stickers (Blue Racing)

2 FORD RACING 12" BLUE Racing Vinyl Sticker

2- 5"x 12" Ford Racing Decals in your Choice of Red or Blue Racing Design. Let Our Ford Racing Decals Stand Out on the Side of Your Ride. HIGHEST OUTDOOR DURABILITY IN Sun, Snow or Rain. Our Pair of FORD Racing Decals will take your Car to the Next Level with a Full out Racing Appearance. They Also Look Amazing on your Tool Chest or Garage Wall. These are Fully Waterproof vinyl decals that can be applied to your car, notebook, computer or just about any flat/semi flat Clean surface: Metal, Glass, Stainless Steel, Painted wood, Plexiglas, etc... Precision Cut vinyl Sticker will give you Years of enjoyment without fading, peeling or cracking. Over 20 Years Experience With 1000's of Very Happy Customers:)

  • Color: Blue Racing
  • Brand: Street Legal Decals
  • ASIN: B01N6Y0M47

BlackPath - 302 + 351W + 351C + 400M V-Belt Pulley Kit Ford Engines (Polished) T6 Billet

BlackPath - 302 + 351W + 351C +

Black Path Billet V-Belt Pulley Kit. Compatible with: Ford 302, 351 Windsor, 351 Cleveland and 400M. Here at BP we know the importance of keeping your motor operating efficiently and properly. Our 3 piece aluminum pulley set accomplishes this with minimal effort. Our kit provides a 90% under driven ratio to maintain proper cooling and charging functions. CNC machined from solid billet aluminum for light weight with exceptional strength, anodized and polished for a stunning appearance. This set requires absolutely no maintenance once installed. Must be installed with the factory harmonic balancer. Black Path Billet V-Belt Pulley Kit comes with 1x Billet Alternator, 1x Billet Water pump, 1x Billet Crank Pulley and Hardware kit.

  • Brand: Black Path
  • ASIN: B00YI6SWDY

BBK 1025 Intake Manifold Engine Plenum Cover - Titanium Silver Powder Coat for Mustang GT

BBK 1025 Intake Manifold Engine Plenum Cover -

BBK Performance Mustang Intake plenum covers are a great way to dress up the engine bay of any 2005-2009 Ford Mustang GT 4.6L 3V. These decorative intake covers offer a great way to dress-up the under hood looks of your Ford Mustang GT with minimal cost. Recently BBK engineers re-tooled this popular Mustang Engine Cover in a new die-cast version which provides a much better finish and it is nice and light. No other modifications are needed for installation and all popular BBK add-ons such as the BBK cold air intake kit, throttle body and strut tower brace are designed to also fit. Currently Available In two finishes: Titanium Silver Metallic and Charcoal Black Metallic See item description for color. About BBK Performance: BBK Performance has designed and manufactured high quality performance parts in the USA for over 25 years and they are today’s leader in aftermarket EFI performance parts that exceed OEM for American cars and trucks. Without exception all BBK Performance parts are direct bolt on with no modifications. Why follow when you can lead? That is the goal at BBK Performance – To lead the aftermarket parts industry with innovation, quality and value and continue to be the number one manufacturer of EFI performance parts and accessories for today’s high performance...

  • Color: Titanium Silver
  • Brand: BBK Performance
  • ASIN: B001G7CF5O
  • UPC: 197975010254

Hayden Automotive 3680 Rapid-Cool Thin-Line Electric Fan

Hayden Automotive 3680 Rapid-Cool Thin-Line Electric

Hayden's Rapid-Cool Thin-Line Electric Fans offer reversible push/pull operation with a "S" blade fan design coupled with high quality, long life motors. The thin aerodynamic profile accommodates applications with limited space.

  • Brand: Hayden Automotive
  • ASIN: B000C3BB8A
  • UPC: 036752036806

GPLUS Racing Aluminum 2 Row Radiator For 67-70 FORD MUSTANG L6/V8 20" Core

GPLUS Racing Aluminum 2 Row Radiator For 67-70

Title: Aluminum Racing Radiator Application: 1967-1969 Ford Mustang V8 1968-1969 Ford Torino V8 1967-1968 Ford LTD V8 1964-1968 Ford Country Squire L6/ V8 1964-1968 Ford Country Sedan L6/ V8 1964-1967 Ford Galaxie (261) L6/ V8 1963-1969 Ford Fairlane L6/ V8 1966-1970 Ford Falcon V8 1967-1968 Mercury Cougar/ XR7 V8 (Fits Manual Transmission Models Only with 302/ 351/ 390/ 428/ 429 Cu. In. V8 Engines) (Might Require Modification to Fit 289/ 352/ 427 V8 or l6 Models) Description: 100% Brand New Overall Size: 22" x 21" x 4.92" Core Size: 19.68" x 16.14" x 2" Improves Cooling by 35 - 45% Temp. Stronger & Higher Capacity for Coolant than Stock Units Made of High Quality Full T-6061 Aluminum Construction Light Weight Direct Bolt-On OEM Fitment or Replacement High Performance Racing Spec. Professional Installation is Highly Recommended (No Instruction Included) Package Includes: 1 * Aluminum Racing Radiator , as shown in the picture US Free Shipping: 1、Our products have been shipped to United States Warehouse ahead, and have been strictly inspected by the costoms, please rest assured purchase 2、Without exception, our products are supplied directly from our manufacturer, in order to enable us to offer a low price guarantee to give you a product 3、Our digital images are as accurate a...

  • Color: Silver
  • Brand: Generic
  • ASIN: B06XK72XL2
  • UPC: 710560023370

13-14 Mustang Front Engine Splash Shield Under Cover/Stone Deflector FO1228130

13-14 Mustang Front Engine Splash Shield Under Cover/Stone

Brand New Engine Splash Shield Under Cover Stone Deflector! High Quality - Certified - Oe Replacement Aftermarket - Made Of Durable ComponentsThis Item Fits The Following Years And Models:2013 2014 Ford Mustang (Base & Gt Models)Note: Coupe & Convertible 2-Door - 3.7 & 5.0 Liter Engine - Without California Edition - PlasticPlacement: Front

  • Color: Black
  • Brand: KOOLZAP
  • ASIN: B07CH3C3JS

OE Replacement 2011-2014 FORD MUSTANG Engine Coolant Reservoir (Partslink Number FO3014120)

OE Replacement 2011-2014 FORD MUSTANG Engine Coolant Reservoir

  • Brand: Multiple Manufacturers
  • ASIN: B01MYRFLXI

Hayden Automotive 512 High Performance Transmission Cooler

Hayden Automotive 512 High Performance Transmission

High performance transmission coolers are a round tube serpentine design featuring threaded fittings for added reliability. Kits contain cooler, hose and mounting hardware.

  • Brand: Hayden Automotive
  • ASIN: B000C3DDEA
  • UPC: 036752005123

Original Engine Management ECS1 EGR Valve

Original Engine Management ECS1 EGR

Every item in the Original Engine Management program is tested to conform to original equipment quality form, fit, and function.

  • Brand: Original Engine Management
  • ASIN: B0067UDWES
  • UPC: 841266079504

VMS Racing CHROME Engine Oil DIPSTICK HANDLE in Billet Aluminum for FORD MUSTANG 99-17 1999-2017 GT GT500 4.6L 5.0L 5.4L

VMS Racing CHROME Engine Oil DIPSTICK HANDLE in

This VMS Racing CNC Machined T6061 Billet Aluminum Oil Dipstick Handle with Vitton O-rings will fit the Ford Mustang 4.6L, 5.0L and 5.4L engines. It will easily installs in minutes without the need of any specialty tools. You simply slide out the retaining pin on the Ford OEM plastic handle using the pin removal tool that is included. Replace the old handle with the new VMS Oil Dipstick handle and slide the NEW PIN that is provided in the kit. Everything you need to make this upgrade easy in included. This is a great piece for anyone looking to enhance the look of their engine compartment without spending a lot of money. You can now replace that ugly yellow handle that is missing, cracked, broken or plain ugly with this beautiful VMS Racing Billet Aluminum Oil Dipstick handle. Installation Skill level required = Easy Peasy Lemon Squeezy.

  • Brand: VMS Racing
  • ASIN: B077N5BKVK
  • UPC: 797132206386

M14 x 1.5 Gun Metal Aluminum 5000 Gauss Magnetic Oil Drain Plug For Acura/Dodge/Ford/Honda/Hyundai/Isuzu/Jeep/Kia/Mazda/Mitsubishi

M14 x 1.5 Gun Metal Aluminum 5000 Gauss

The New NRG Magnetic Oil Drain Plug is embedded with high intensity magnet that catches any ferrous metallic particles in the engine or transmission oil, resulting in optimum oil cleanliness. The embedded design is to ensure that the magnet will not drop into the oil pan. Made from T6061 high grade aluminum, containing a strong 5000 Gauss magnet that is more than sufficient for the job. The NRG Magnetic Oil Drain plug comes in an assortment of anodized colors for superior corrosion resistance. Just wipe it clean and reinstall every change oil to ensure proper performance.

  • Color: Gun Metal
  • Brand: UrMarketOutlet
  • ASIN: B07CX9WDH9

Eagle BHP 1282 Engine Motor Mount (Front Left 3.8L For Ford Mustang)

Eagle BHP 1282 Engine Motor Mount (Front Left

One Brand New Replacement Part High Quality and Performance : Engine Motor Mount Front Left 3.8L For Ford Mustang.

  • Brand: Eagle BHP
  • ASIN: B015ZTLYY6
  • UPC: 841257101795

ECOGARD XA10421 Premium Engine Air Filter Fits 2015-2017 Ford Mustang

ECOGARD XA10421 Premium Engine Air Filter Fits 2015-2017

ECOGARD XA10421 COMPATIBLE with 2015-2017 Ford Mustang. Replaces: Motorcraft FA1918, Purolator A48156, Premium Guard PA8156, OEM FR3Z-9601A.

  • Brand: EcoGard
  • ASIN: B01AAF1F58
  • UPC: 674118123908

Needa Parts 653096 Oil Drain Plug and Gasket for GM

Needa Parts 653096 Oil Drain Plug and Gasket

  • Brand: Needa Parts
  • ASIN: B001NYMUWI
  • UPC: 676369653098

Million Parts Mass Air flow Meter Sensor MAF Sensor For 2003 Ford E-150/E-250 & 03-04 Ford Escape/Focus & 01-05 Ford Explorer & 01-04 Ford Mustang

Million Parts Mass Air flow Meter Sensor MAF

Fitment for: 2003 Ford E-150 4.2L 256Cu.V6 2003 Ford E-250 4.2L 256Cu.V6 2003-2004 Ford Escape 2.0L 1989CC 121Cu.l4 2001-2005 Ford Explorer 4.0L 245Cu.V6 2002 Ford Explorer 4.6L 281Cu.V8 2001-2005 Ford Explorer Sport Trac 4.0L 245Cu.V6 2003-2004 Ford Focus 2.0L 1989CC 121Cu.l4 2001-2004 Ford Mustang 3.8L 232Cu.V6 2004 Ford Mustang 3.9L 238Cu.V6 2003 Ford Ranger 2.3L 140Cu.l4 2001-2003 Ford Ranger 4.0L 245Cu.V6 2001-2003 Ford Windstar 3.8L 232Cu.V6 2003-2004 Mazda B2300 2.3L 2300CC l4 2004 Mazda B4000 4.0L 4016CC V6 2004-2005 Mercury Mountaineer 4.0L 245Cu.V6 2002-2003 Mercury Sable 3.0L 2967CC 181Cu.V6

  • Brand: MILLION PARTS
  • ASIN: B072N7WLY2

Hayden Automotive 112 Engine Oil Cooler Hose

Hayden Automotive 112 Engine Oil Cooler

Hayden's high quality cooler hose is a double cross braided design that maintains shape and form under pressure. It is a black long rubber transmission cooler hose.

  • Brand: Hayden Automotive
  • ASIN: B000HE5G0S
  • UPC: 036752001125

MACs Auto Parts 44-41784 Ford Mustang Engine Timing Pointer - With Mounting Bolt - Reproduction - 289 & 302 V-8

MACs Auto Parts 44-41784 Ford Mustang Engine Timing

Ford Mustang Engine Timing Pointer - With Mounting Bolt - Re,production - 289 & 302 V-8

  • Brand: MACs Auto Parts
  • ASIN: B079VP1JZH

Needa Parts 653076 M12-1.75 Oil Drain Plug for GM

Needa Parts 653076 M12-1.75 Oil Drain Plug for

  • Brand: Needa Parts
  • ASIN: B001NYP6VU
  • UPC: 676369653074

PROFessional Powertrain DFXD Ford 302 Complete Engine, Remanufactured

PROFessional Powertrain DFXD Ford 302 Complete Engine,

This engine is remanufactured using the most technically advanced methods - incorporating both CNC machining and DC torque equipment. All components are inspected to assure viability and then verified by Quality Control Personnel. All sub-assemblies and components are both pressure and vacuum tested prior to being installed. Once assembled, state of the art computer controlled pressure testing is performed as a final verification of casting integrity. Final testing is done with our proprietary “ProTester Max” at 600 RPM. If applicable both VVT (Variable Valve Timing) and DOD (Displacement on Demand) units are physically operated and 100% confirmed. Compression, oil pressure, oil flow and four, ninety degree stop and match readings are verified to assure your engine will meet or exceed your expectations. Fluorescent dye within the testing oil is used as a countermeasure to find any possible oil leaks, including the crankshaft rear seal. This state of the art testing far surpasses a “hot fire” engine. Engines come as long block assemblies that ship with a finishing gasket set and a new oil pump. We consider it a privilege to provide you with engine assemblies that we remanufacture with PRIDE!

  • Brand: PROFormance Powertrain
  • ASIN: B007CXHM36
  • UPC: 653517087929

Mac Auto Parts 37962 Mustang V8 Coupe Engine & Transmission Mount 3 Pc MOTOR MOUNT & TRANS

Mac Auto Parts 37962 Mustang V8 Coupe Engine

This Item Is A New Oem Style Replacment 3 Pc Mount Kit The Picture Is AccurateMatch It To The One You Need. This Mount Meets Or Exceeds Oe Spec And Fits The Following: Ford Fits1968 1969 1970 1971 1972 1973 Mustang V8 289 & 302 Coupe Only Kit Includes Part # 1 / A2257 R/F Motor Mount Part # 1 / A2257 L/F Motor Mount Part # 1 / A2253 Transmission Mount A/T Or M/T

  • Brand: Mac Auto Parts
  • ASIN: B015WOZXA0

Assault Racing Products A6728-3 Small Block Ford Finned Polished Aluminum Tall Valve Covers Retro SBF 289 302 351W 5.0

Assault Racing Products A6728-3 Small Block Ford Finned

This is a new pair of small block Ford cast aluminum polished valve covers. Retro style finned top. Fits 1962-1985 small block Ford 289, 302, 351W. Finned top Polished aluminum Tall style - 3 13/16" height 1 1/4" breather hole per cover Baffles included Stainless bolts included Grommets included Thick cast aluminum

  • Color: Polished
  • Brand: Assault Racing Products
  • ASIN: B00S75E1BO
Similar Mustang Engine Parts Shopping Results