X-Haibei Outboard Motor Bracket for Boat Auxilary Up to 20HP Stainless Steel Mounts 4 Stroke

X-Haibei Outboard Motor Bracket for Boat Auxilary Up

Transom mount locks and holds the outboard motor up or lowers the motor down for propulsion. The completed installation should result in the cavitation plate of the outboard motor being parallel to the surface of the water. The height of the outboard bracket on power boats should be localted so that the cavitation plate is nearly flush with the bottome of the boat immediately forward of the engine being mounted.

  • Brand: X-Haibei
  • ASIN: B06XSTT7H4
  • UPC: 713458341365

Garelick/Eez-In 71078:01 Stationary Outboard Motor Bracket - Horizontal Platform Mount

Garelick/Eez-In 71078:01 Stationary Outboard Motor Bracket - Horizontal

Horizontal Platform Mount. Made in the USA.

  • Brand: Garelick/EEz-In
  • ASIN: B000OHNAWO
  • UPC: 038203710785

Panther 55-0407AL Aluminum Lightweight 4-Stroke Bracket

Panther 55-0407AL Aluminum Lightweight 4-Stroke

Adjustable outboard motor bracket works with 4-stroke motors up to 15 horsepower or 2-stroke up to 20 horsepower, maximum weight of 132 pounds. This black, hard-coat anodized aluminum bracket is built to handle the increased torque output of today's four stroke engines. Twist-knob safety locks provide increased torque rating while helping secure bracket in place. Motor's weight is counterbalanced by heavy-duty stainless steel torsion springs for easy lifting. Boasts a 2 inch thick, extra-wide, weatherproof and maintenance-free polypropylene mounting board along with aircraft-type stainless steel hardware.  Four-position lock bar and 10 inch of travel allows for better range of trim adjustment letting you fine tune motor height for optimal performance. Rated for long or short shaft engines.

  • Brand: Panther ATV
  • ASIN: B00CKFUF12
  • UPC: 836125004070

M-ARINE BABY Aluminum Marine Boat Outboard Motor Mounting Bracket - Black Mounting Plate

M-ARINE BABY Aluminum Marine Boat Outboard Motor Mounting

M-ARINE BABY Aluminum Outboard Motor Bracket Heavy-Duty Aluminum Construction and comes with a solid polypropylene mounting board.Outboard motor bracket is most suitable for 2-stroke motors 7 1/2 HP to 20 HP.Durable and it fits small to medium sized powerboats and yachts. Features:Trolling auxiliary motors enable retractable bracket on power and sailboats with ease. The maximum weight of 115lbs. Suitable for small to medium sized powerboats and yachts. Spring loaded, with 5 vertical position, adjustable bracket. Includes lift and lower heavy duty springs. Specifications: Mounting Holes: 0.314" (8mm). Lift Range: 13 3/8" (340mm). Mounting Broad Size: 8-1/4" * 10-3/8" (210mm*264mm) . Mounting Size 5-1/4" * 9" (133.35mm*228.6mm). Horizontal Distance of Mounting Holes (C-to-C): 3.93" (100mm).

  • Brand: M-ARINE BABY
  • ASIN: B0727L8Z3T

Brocraft Rail Mount Outboard Motor Bracket/Engine Bracket for Boat

Brocraft Rail Mount Outboard Motor Bracket/Engine Bracket for

Designed to hold small outboards up to 8 HP- 2 cycle upright on the stern rail

  • Color: Fit 1" Rail
  • Brand: Brocraft
  • ASIN: B0732TPRVY

M-ARINE BABY Aluminium Boat Outboard Motor Bracket Mount Heavy Duty Marine Auxiliary 7.5-20hp

M-ARINE BABY Aluminium Boat Outboard Motor Bracket Mount

M-ARINE BABY Aluminium Boat Outboard Motor Bracket Mount Heavy Duty Marine Auxiliary 7.5-20hp

  • Brand: M-ARINE BABY
  • ASIN: B071V33TNC

Brocraft Deck Mount Trolling Motor Bracket/Outboard Motor Mount

Brocraft Deck Mount Trolling Motor Bracket/Outboard Motor

Features:Brocraft Trolling Motor bracket simplifies the mounting of your trolling motor. The removable deck plate mounts to any flat deck area with a permanent 3/8" x 5 1/2" diameter deck plate. The removable mount then bolts to the deck plate. The unit is constructed of marine aluminum with black Nylon plastic.

  • Color: Standard Bracket
  • Brand: Brocraft
  • ASIN: B01HJM9052
  • UPC: 742790780921

Pactrade Marine Auxiliary Heavy Duty Aluminum Motor Bracket 7.5-20HP Outboard 2-Stroke Boat

Pactrade Marine Auxiliary Heavy Duty Aluminum Motor Bracket

This is a heavy duty motor bracket that is made of anodized aluminum and it comes with a solid polypropylene mounting board as pictured. This motor bracket is most suitable for 2-stroke motors 7 1/2 hp to 20 hp. This motor bracket is durable and it fits small to medium sized powerboats and yachts. Features: It is for 2-stroke motors 7 1/2 hp 20 hp. Trolling auxiliary motors enable retractable bracket on power and sailboats with ease. The maximum weight of 115lbs. Suitable for small to medium sized powerboats and yachts. Spring loaded, with 5 vertical position, adjustable bracket. Body of bracket made of anodized aluminum and it comes with solid polypropylene mounting board. Includes easy to lift and lower heavy duty springs. Specifications: Mounting holes: 0.314" (8mm). Lift range: 13 3/8" (340mm). Mounting board: 10 1/4" x 8" (260mm x 205mm) . Mount area on board: 5 1/4" x 9" (135mm x 230mm). Horizontal distance of mounting holes (c-to-c): 3.93" (100mm). Customers please note every computer shows colors differently. All measurements are approximate. Item number: P72534/s04100.

  • Brand: Pactrade Marine
  • ASIN: B01H94Q5QW
  • UPC: 646341405175

Garelick/Eez-In 71074:01 Stationary Outboard Motor Bracket - Vertical Transom Mount

Garelick/Eez-In 71074:01 Stationary Outboard Motor Bracket - Vertical

Garelick/Eez-In has been a leader in marine innovation for over 60 years. As a company, it prides itself on offering quality products backed by integrity, innovation and service.

  • Brand: Garelick/EEz-In
  • ASIN: B001447NEC
  • UPC: 038203710747

Seasense Motorbracket 15-20 Hp Outboard Stationary

Seasense Motorbracket 15-20 Hp Outboard

Stationary Outboard Motorbracket, 15-20 HP, Bulk

  • Brand: SeaSense
  • ASIN: B004XAGXE0
  • UPC: 744288962918

Garelick/Eez-In 71090:01 Aluminum Auxiliary Motor Bracket for 4 Stroke Motors

Garelick/Eez-In 71090:01 Aluminum Auxiliary Motor Bracket for 4

4 Stroke Motor Bracket H.P. Rating: Over 7-1/2 to 30 Motor Weight Not To Exceed: 169 lbs. Vertical Travel: 9-1/2" (24 cm) Mtg. Plate: Poly Mtg. Board Dimension W x H x T: 11-1/2" x 10-3/4" x 2"

  • Color: Aluminium
  • Brand: Garelick/EEz-In
  • ASIN: B001449804
  • UPC: 038203710907

Outboard Motor Wall Storage Bracket, Compact Lightweight Storage Stand, Me-165

Outboard Motor Wall Storage Bracket, Compact Lightweight Storage

Quickly and easily free up that valuable floor space with the smartly designed Sternmaster Lightweight Outboard Motor Wall Storage Brackets featuring 14 gage carbon steel construction and a customizable load capacity. Simply mount each bracket to your desired wall (wall mounting hardware NOT included) and place a 2x8 inch board between them(board NOT included). Each bracket has three mounting holes for secure wall attachment, and two holes to bolt the board to the bracket. Load capacity is up to your discretion and should be based upon board length, type of wood, and wall strength. Perfect for residential or light commercial use. Store 1-? outboards based on your discretion.

  • Color: Black
  • Brand: Sternmaster Marine Tools
  • ASIN: B00AJ4CGDG

M-ARINE BABY Stainless Steel Outboard Motor Bracket Kicker for Boat, Marine Auxiliary Trolling Mount 7.5-20hp

M-ARINE BABY Stainless Steel Outboard Motor Bracket Kicker

Outboard Motor Bracket Kicker for Boat, Marine Auxiliary Trolling Mount 7.5-20hp

  • Color: silver
  • Brand: M-ARINE BABY
  • ASIN: B07CWKPW47

Marinetech 55-0410 Marine 4-Stroke Bracket

Marinetech 55-0410 Marine 4-Stroke

PANTHER ™ 4-STROKE AUXILIARY OUTBOARD MOTOR BRACKET Durable black-anodized aluminum bracket. Adjusts trolling or auxillary motor to 5 vertical runningpositions for changing water or load conditions. Hand-adjustable w/turn of knob. Features stainless steel torsion springs to counter- balance motor weight for easy adjustment. Includes 2 " thick extra-wide polypropylene motor mounting board w/aircraft-type stainless steel hardware for heavy-duty performance. Includes: motor safety cable. Requires: backing plate stainless steel nuts & bolts. Handles up to 30hp w/10'' of travel.

  • Color: Black
  • Brand: Marinetech
  • ASIN: B0032HLA0M
  • UPC: 836125004100

Starter Solenoid Replacement For Johnson, OMC, Evinrude Outboard Motor

Starter Solenoid Replacement For Johnson, OMC, Evinrude Outboard

BRAND NEW SOLENOID FOR OMC & JOHNSON / EVINRUDE OUTBOARD APPLICATIONS Starter Solenoid for OMC, Johndon, & Evinrude Outboard Motors 12 Volts 4 Terminals Intermittent Duty (383622, 395419, 582708, 586180, 47886, 47886T) Original Equipment Quality at an Aftermarket Price! Item Specific OEM(s): OMC Voltage: 12 Volts Number of Terminals: 4 Duty Cycle: Intermittent Duty Notes: (2) 10-32 & (2) 5/16-24 Threaded Terminals, Insulated Ground OMC Outboard Marine: 383622, 395419, 582708, 586180 Mercury Marine: 47886, 47886T Solenoid Fits the Following Outboard Marine Engines: E40ECRM , E40ELCRM, E40RCRM, E40RLCRM E40TECRM, E40TELCRM ,CE275TLCOS ,CE275TXCOS, CE300TLCOS, CE300TXCOS, E100WMLCOC, E100WTLCOC, E115MLCOS, E115TLCOS, E120TLCOS, E120TXCOS, E140TLCOS, E140TXCOS, E150STLCOH, E150STLCOS, E150TLCOS, E150TXCOS, E155WTLCOC, E155WTXCOC, E175TLCOC, E175TXCOC, E185TLCOC ,E185TXCOC, E20CRCOS,E20CRLCOS, E20ECOS, E20ELCOS, E235STLCOR, E235TLCOR, E235TXCOR, E25ECOC, E25ELCOC, E25RCOS, E25RLCOS, E25TECOS, E25TELCOS, E275TLCOS, E275TXCOS, E300TLCOS, E300TXCOS, E30ECOA , E30ELCOA, E30RCOA, E30RLCOA, E30TECOA, E30TELCOA, E40ECOB, E40ELCOB, E40RCOB, E40RLCOB, E40TECOB, E40TELCOB, E50BECOB, E50BELCOB, E50TELCOB, E50TLCOB, E60ELCOD, E60TLCOD, E65RWLCOC, E65TELCOC, E65WMLCOC, E65WTLCOC, E70EL...

  • Brand: Crank-n-Charge
  • ASIN: B004V3QBS2

X-Haibei Heavy Duty Marine Outboard 2 Stroke Kicker Motor Bracket Up to 20HP Aluminium

X-Haibei Heavy Duty Marine Outboard 2 Stroke Kicker

Retractable bracket for trolling auxiliary motors on power and sailboats with ease, Heavy duty with reinforced welded frame and stamped stainless components. Suits 2-stroke motors 7 1/2 - 20 HP, with a maximum weight of 52kg (115lbs), Ideal for small to medium sized powerboats and yachts. Spring loaded (5 vertical position) adjustable bracket, Wide track body for added stability. Heavy duty, lightweight marine grade anodised aluminium frame, stainless steel springs. Solid polypropylene mounting board. Easy to lift and lower - heavy duty springs help counterbalance motor weight.

  • Brand: X-Haibei
  • ASIN: B07916R8TL

SeaLux 20 HP 2 Stroke Motors OUTBOARD AUXILIARY STAINLESS MOTOR BRACKET

SeaLux 20 HP 2 Stroke Motors OUTBOARD AUXILIARY

5 position locking height adjustment Wide track body for added stability. Made of tough 304 Stainless Steel Mounting pad: 8-1/4" wide * 10-3/8" long ×2" thick; Designed to also accommodate the width dimensions of late model auxiliary outboard motors Maximum HP Capacity: 7 to 20. Maximum Motor Weight: up to 115 lbs. Vertical Travel: 11.25. Motor Pad (w x h x d): 8-1/4"W *10-3/8"H ×2" D; Installation Space Required (w x h): 9 x 9.

  • Brand: SeaLux
  • ASIN: B00VJMMV50
  • UPC: 813969020251

YaeMarine 2 Stroke 20HP Heavy Duty Outboard Stainless Motor Bracket(7951S)

YaeMarine 2 Stroke 20HP Heavy Duty Outboard Stainless

-For 2-stroke motors 7 1/2 - 20 HP -Material: Stainless steel construction, solid polypropylene mounting board Board area: 270 x 210mm (10 1/2" x 8 1/4"). -Mount area on boat: 205 x 220mm (8" x 8 5/8"). -Mount holes: 8mm. -Lift range: 285mm/11.25". -Mounting holes have a horizontal distance of 170mm across (centre to centre), and multiple vertical distances of 100mm, 130mm, or 160mm(centre to centre).

  • Color: Silver
  • Brand: YaeMarine
  • ASIN: B07JN3L639
  • UPC: 733810485841

PANTHER MARINE 55-0028 Fixed-Mount 4-Stroke Outboard Motor Bracket

PANTHER MARINE 55-0028 Fixed-Mount 4-Stroke Outboard Motor

The Panther 55-0028 Fixed-Mount 4-Stroke Outboard Motor Bracket works with two and four-stroke motors up to 35 HP and 263 lbs. maximum weight. It features a rugged polypropylene mounting board. Includes stainless steel mounting hardware and a safety cable. Designed specifically for use in a marine environment.

  • Brand: PANTHER MARINE
  • ASIN: B00CKFUF4Y
  • UPC: 836125000874

Five Oceans Rail-Mount Outboard Bracket FO-1586

Five Oceans Rail-Mount Outboard Bracket

These Five Oceans Rail-Mount outboard bracket should be kept safe and upright on the stern rail, rather than stuffed in a locker where hazardous fumes could collect, or spill and ruin stored goods. Includes two-piece mounting blocks clamp around a 1" (25.4mm) O.D. rail "T" and hold outboards up to 8hp. Made from UV-stabilized polypropylene. Not to mention, these motor brackets will fit both 7/8" and 1" rails as well as rails using 90 Degree tee fittings. SPECIFICATIONS: Recommended Usage: Storage for outboard motors up to 8 HP (Holds up to 90lbs) Material: UV-stabilized polypropyleneAttachment Method: 7/8" and 1" rails as well as rails using 90 tee fittingsAttachment Hardware: Stainless steel fasteners includedDimensions: 6 5/8" (168mm) x 7" (178mm)Style: FixedPRODUCT NUMBER: FO-1586

  • Color: white
  • Brand: Five Oceans
  • ASIN: B00JH0NSNK
  • UPC: 730669447112
Similar Outboard Motor Mounting Brackets Shopping Results