KIT-1593P Box+PCB, Black ABS Plastic Box with Batt. Compartment, with PR1593P PCB, Box = 3.6 x 2.6 x 1.1 in

KIT-1593P Box+PCB, Black ABS Plastic Box with Batt.

This kit is a black Hammond 1593PBK plastic enclosure packaged together with a matching ProtoBoard 2-hole per strip PCB.The hand-held electronic case has a battery compartment for 1xAA, 2xAA, 1 to 4 AAA, or 1x9V battery (battery holder not included). It has a long life "three snap" battery door, PCB standoffs, and a removable end panel. It has a recessed top for membrane overlay or keypad. Lap joint construction provides protection against dust accumulation and splashing water. The PR1593P prototyping circuit board (PCB) has the convenient 2-hole ProtoBoard pattern, which provides an easy way to connect parts while maximizing usable board area.

  • Brand: BusBoard Prototype Systems
  • ASIN: B0040Z32U6
  • UPC: 610074522997

KIT-1593K Box+PCB, Black ABS Plastic Box, with PR1593K PCB, Box = 2.6 x 2.6 x 1.1 in

KIT-1593K Box+PCB, Black ABS Plastic Box, with PR1593K

This kit is a black Hammond 1593KBK plastic enclosure packaged together with a matching ProtoBoard 2-hole per strip PCB.The hand-held electronic case has built-in PCB standoffs and 2 styles of removable end panels, flat and rounded. It has a recessed top for membrane overlay or keypad. Lap joint construction provides protection against dust accumulation and splashing water. The PR1593K prototyping circuit board (PCB) has the convenient 2-hole ProtoBoard pattern, which provides an easy way to connect parts while maximizing usable board area.

  • Brand: BusBoard Prototype Systems
  • ASIN: B00M2CLI8W
  • UPC: 610074522973

BusBoard Prototype Systems BOX3-1455N-BK Black Aluminum Box, for 3U Sized PCBs, with 11 Card Guide Slots, Box = 6.30 x 4.06 x 2.10 in

BusBoard Prototype Systems BOX3-1455N-BK Black Aluminum Box, for

The BOX3-1455N-BK is an extruded aluminum enclosure for electronic projects. The enclosure is designed for BusBoard Prototype Systems 3U sized prototype PCBs (100x160mm boards) which are standard Eurocard/VME size. PC boards mount horizontally by sliding into built-in card guide slots. Two aluminum end panels are provided with attractive plastic bezels to hide the seams. The screws are recessed flathead type to provide a flat surface. The silver aluminum is clear anodized for protection from the elements. The end panels and the top plate can be removed for easy drilling or cutting of holes. Screws and adhesive rubber feet are included.

  • Color: Black
  • Brand: BusBoard Prototype Systems
  • ASIN: B00TJ49K4U

Eightwood Aluminum Project Enclosure Box Electronic Case for PCB Board DIY- 4.32" x 3.74" x 2.17"(LWH) Split Top with Pre-assembled Extrusion Box

Eightwood Aluminum Project Enclosure Box Electronic Case for

Features: Heavy gauge extruded aluminum construction Professional sandblast/matte anodized finish Built-in grooves for holding circuit board Excellent electromagnetic shielding performance Heat sink nature, electromagnetic field protection and robust construction. Front and back panels and fasteners are included. Just for one PCB board Application: electronic projects, power supply units, student projects, amplifiers, etc Dimensions: Outer:4.32" x 3.74" x 2.17"/110mmx95mmx55mm (L*W*H) Inner:4.32" x 3.43" x 1.93" /110mmx87mmx49mm (L*W*H) Please be noted the drawing on the picture is measured in mm, not inch Package Included: 1x Eightwood Aluminum Box (screws included)

  • Color: Dark grey
  • Brand: Eightwood
  • ASIN: B0107WU67M
  • UPC: 712321167484

Prototyping Box with PCB - 343 Holes - 83 x 53 x 35mm

Prototyping Box with PCB - 343 Holes -

  • ASIN: B00LUCRLTK
  • UPC: 700736686652

Hammond 1591XXMBK ENCLOSURE, PCB BOX, ABS, BLACK

Hammond 1591XXMBK ENCLOSURE, PCB BOX, ABS,

HAMMOND 1591XXMBK ENCLOSURE, PCB BOX, ABS, BLACK

  • Brand: Hammond
  • ASIN: B00B88E4CS
  • UPC: 623980035338

CircuitSetup Solderable Breadboard PCB for Arduino, ESP8266, ESP32 Prototyping - with 3.94" x 2.375" x 1.875" (100x60x25mm) Project Box (2-Pack)

CircuitSetup Solderable Breadboard PCB for Arduino, ESP8266, ESP32

This solderable breadboard is made to be easily configured with minimal soldering while fitting in a 3.94" x 2.375" x 0.875" (100x60x25mm) ABS project box. It features: - Holes for 2 & 3 pin screw terminals that are connected to power rails - Power rails can be tied together or can be separate for different voltages - Screw holes can be tied to ground - Additional holes next to the rails, at the end of rows, and in the middle of the board for easily placing connectors, components, or tying together power rails and rows - Holes on opposite end for connectors, switches, LEDs or whatever else you would like - Solder pads in the middle of the board to tie rows together - Snap on lid for project box - Comes in packs of 2 with 2 3.94" x 2.375" x 0.875" (100x60x25mm) boxs & 8 mounting screws

  • Color: Black
  • Brand: CircuitSetup
  • ASIN: B07H9CV1H9

3 pcs 1590A small box pedal pcb enclosure unpainted

3 pcs 1590A small box pedal pcb enclosure

3 pcs 1590a (smallest size) unpainted enclosure Includes: 3 pcs 1590A Enclosure 3 pcs prototype PCB 1 pcs step drill (11 steps, 3mm - 12mm), ideal steps to drill guitar pedals)

  • Color: unpainted
  • Brand: 3pdt
  • ASIN: B06XDCPYS1

BUD Industries CU-3283 Plastic Style A Utility Box, 6-3/32" Length x 4-19/32" Width x 2-23/64" Height, Black Texture Finish

BUD Industries CU-3283 Plastic Style A Utility Box,

ABS plastic with UL 94V-O flammability rating suggested service temperature of -20 to 70 degrees C. Comes with close fitting interlocking lid and assembly hardware. Cover included design. PCB supports features. Made of plastic. Black finish. External measures 6-3/32" length by 4-19/32" width by 2-23/64" height; internal measures 5-53/64" length by 4-21-64" width by 2-5/32" height.

  • Color: Black Texture Finish
  • Brand: BUD Industries
  • ASIN: B005T5A0W4

Eightwood Aluminum Project Box Electronic Enclosure Case for PCB Board DIY, 4.32" x 2.82" x 1.13"(LWH) Symmetrical Split Body with Stripped Sides Box

Eightwood Aluminum Project Box Electronic Enclosure Case for

Features:Heavy gauge extruded aluminum construction Professional sandblast/matte anodized finishBuilt-in grooves for holding circuit board Excellent electromagnetic shielding performanceHeat sink nature, electromagnetic field protection and robust construction.Front and back panels and fasteners are included. Application:electronic projects, power supply units, student projects, amplifiers, etcDimensions:Outer:4.32" x2.82" x 1.13" /110mmx72mmx29mm  (L*W*H)Inner:4.32" x 2.71" x 1.02" / 110mmx69mmx26mm ( (L*W*H)Please be noted the drawing on the picture is measured in mm, not inchPackage Included:1x Eightwood Aluminum Box (screw included)

  • Color: Silver
  • Brand: Eightwood
  • ASIN: B0107WWDFU
  • UPC: 712321167613
Similar Pcb Box Shopping Results