Swanson TL043M 9-Inch Savage Magnetic Torpedo Level
Swanson TL043M 9-Inch Savage Magnetic Torpedo
The SAVAGE Aluminum Torpedo Level are equipped with the most innovative and time-saving features of any level on the market today, all in one pocket-sized, lightweight tool – perfect for contractors and electrical and plumbing professionals. The Savage levels are made of precision-machined, solid-billet aluminum alloy, anodized for maximum durability. The four-vial design incorporates Swanson’s exclusive Brightview milled vial ports that capture and reflect light for increased readability and accurate measurement of 0°, 30°, 45° and 90° angles. Top-read viewing windows offer an easy, straightforward view of the 0° and 30° vials. Laser-engraved SAE and metric rules are prominent features of both levels. Rare-earth, neodymium magnets are considered to be amongst the strongest in the world and have also been integrated into the levels design to provide maximum holding strength while out on the job.
- Color: Blue
- Brand: Swanson Tool Co. , Inc
- ASIN: B002C2SUHY
- UPC: 683247142209
Strong Hand, Pipe Pliers with Large V-Pads, 11-Inch - PG114V
Strong Hand, Pipe Pliers with Large V-Pads, 11-Inch
Save time and money with the quick-acting Strong Hand line of Clamps, Magnets, and Pliers. Each innovative Strong Hand Clamp is specifically designed to be quick-acting, so you save valuable work set-up time. Built with heat-treated steel and nickel/chrome plating for strength and durability. Pieces (qty.): 1, Product Style: Locking clamp, Length (in.): 11, Opening (in.): 1 1/5-2 1/2, Finish Type: Chrome, Material: Steel/nickel, Throat Depth (in.): 3 1/2
- Brand: Strong Hand Tools
- ASIN: B003OU85IW
- UPC: 632102431736
Strong Hand Tools, Pipe Alignment Clamp, with Quick Acting Screws, CPA60
Strong Hand Tools, Pipe Alignment Clamp, with Quick
The New Pipe Alignment Clamp with Quick-Acting Screw is a fast, accurate fit-up clamp with a rugged frame for use in the shop, or at the job site. Get a well-balanced hold on the Pipe Alignment Clamp with the two wide Grip Plates while pressing the Quick-Acting Button. The threaded screw smoothly glides up and down for fast jaw opening and clamp removal after welding.
- Brand: Strong Hand Tools
- ASIN: B0791T3TMG
- UPC: 679352008677
Pipe Trades Pro 4095 Advanced Pipe Trades Math Calculator
53025-M Flange Wizard Small Centering Head
53025-M Flange Wizard Small Centering
Designed to establish and mark a centerline at any angle around the circumference inside or outside on a pipe or tank. Use it as a protractor level, or remove and use the hardened center punch for other marking jobs. Magnetic
- Color: Black and Red
- Brand: Flange Wizard
- ASIN: B002BW7WEM
- UPC: 672435530256
Flange Wizard WW-16 Wizard Wraps, 2 5/8" x 30", Heat Resistant, Small
Flange Wizard 496-WW-17 WW-17 Wizard Wraps, 3 7/8" x 60", Heat Resistant, Medium
Flange Wizard 496-WW-17 WW-17 Wizard Wraps, 3 7/8"
Wizard wrap, made from a non-asbestos, heat resistant material, has a nice thick edge for easier more accurate marking and helps keep your soapstone from slipping. 36 inch tape measure printed on the Medium & large wizard-limits the need for an extra tape measure. Circumference & quartering scale printed on every wrap-limits the need for calculation. Packaged in a durable, reusable container that will hold up in your tool box.
- Brand: Flange Wizard
- ASIN: B00VJ3FVUG
- UPC: 672435981706
Flange Wizard 8905 Two Hole Pipe Magician's Cases, 1/2" - 1-7/16"
Magnetic Flange Alignerkit
Flange Wizard Magnetic Flange Aligners Features the newest OFF/ON 90 lb. holding power magnet technology. It's your third hand and has no threads or nuts to deal with while working on your project. Thickness of the flange is no longer an issue. ON/OFF switch makes setting up easy and keeps the block free from debris Pack of 1
- Brand: Flange Wizard
- ASIN: B01N3BXT4B
- UPC: 672435824034
6 Piece PIPE-PRO Magnetic Metal Pipe Cutting Guide Kit, Steel
Flange Wizard 42050-TM Two Hole Pins, 5/16" - 63/64"
The Pipe Fitters Blue Book
The Pipe Fitters Blue
Commonly referred to as the Pipe Bible, this is the most widely used book in the trade today. It is an easy to understand, pocket sized manual with a durable, water resistant cover. It contains illustrations such as solving rolling offsets, centers of 15o, 22-1/2o and 60o butt weld elbows cut from a 90o elbow. It also contains layouts for a true Y layout, common pipe angles and their solutions, special offsets and solutions, mitered pipe cuts, multi-piece mitered turns and much more.
- ASIN: 0970832125
Empire EM71.8 Professional True Blue Magnetic Box Level, 8"
Empire EM71.8 Professional True Blue Magnetic Box Level,
Empire Level, the leading designer and manufacturer of levels, squares, layout tools and caution tape in the United States has further enhanced its iconic True Blue product line with a second generation series, the "True Blue Evolution" e2G. Features like Patented Vial Design, Advanced Concentric Manufacturing and Removable Shock-Absorbing End Caps are the direct result of user feedback and field testing. Accuracy, Durability and Readability with a Lifetime Warranty. That's the True Blue promise.
- Color: Original Version
- Brand: EMPIRE
- ASIN: B00LP417N4
- UPC: 617633046505
Mathey Dearman - 3/4" Mini Fit Clamp D230
Mathey Dearman - 3/4" Mini Fit Clamp
#D230 - Mini Fit Clamp (Fits 3/4" to 8" pipe) Mathey Dearman's Mini Fit Clamp is the fledgling son of the Chain Clamp design family. Modeled after its sibling the Single Jackscrew Chain Clamp, the Mini Fit is the perfect tool for aligning small diameter tubes, pipes, and fittings. • The clamp is extremely lightweight and easy to set up and adjust (no special tools required). • Brass jackscrews are designed to avoid pipe marking and scarring and stainless steel versions are also available. • Add or remove chain and jackbars as needed for larger or smaller pipes.
- Brand: Mathey Dearman
- ASIN: B007EX1UZA
Pipe-Pro - MEKIT Metal Cutting Guide Set, Steel
Pipe-Pro - MEKIT Metal Cutting Guide Set,
Item specifics : Item : Metal cutting guide set type : Steel application : For cutting pipe at 22 degrees , 45 degrees , 90 degrees & saddle cuts includes : 1-7/8", 2-3/8", 2-7/8" item : Metal cutting guide set type : Steel function : Place cutting guide around pipe. Trace around guide. Remove guide and cut pipe characteristics : 1-7/8", 2-3/8", 2-7/8" package quantity : 1.
- Brand: Pipe-Pro
- ASIN: B015JYW1DK
- UPC: 791102831714
Flange Wizard 38240-T Threaded Pipe Flange Aligners, 1/2" - 1-7/16"
Flange Wizard 38240-T Threaded Pipe Flange Aligners, 1/2"
Features slotted pins with "friction fitting" knurled nuts for flanges to 30" - 150 lbs. All models of the pipe aligner will two-hole (make 2 holes of the flange horizontally level with the ground) and vertically level the face of the flange in one step. All models come with 360° vials that just "snap" in and out for easy replacement. The aligner inserts easily into pipe, centers snugly against the inside pipe diameter and automatically aligns with the pipe axis.
- Brand: Flange Wizard
- ASIN: B009I2MSVK
Strong Hand Tools, Pipe Fit-Up Clamp, Pipe Welding Alignment Tools (Pipe Diameter Capacity: 2″ ~ 4″ (50~100 mm))
Wizard Wraps - wizard wrap large 6" to30" pipe
Wizard Wraps - wizard wrap large 6" to30"
496-WW-17A Features: -Price Is For One Each -Minimum Order Of 1. -UNSPC CODE: 27111809. -Pipe Cutting & Beveling Equipment Pipe Cutting Beveling Equipment misc. welding pipes. -MAGNETIC TORCH GUIDE. Dimensions: Overall Product Weight: -1.17 Pounds.
- Brand: Flange Wizard
- ASIN: B005YS9C6G
- UPC: 640024932446
B&B Pipe 2130 Stepped Pipe Wedge (Small) 3/4" Width x 4" Length for Pipe Fitting Welding
B&B Pipe 2130 Stepped Pipe Wedge (Small) 3/4"
B&B Pipe 2130 Stepped Pipe Wedge (Small) 3/4" Width x 4" Length for Pipe Fitting WeldingThe B&B Pipe 2130 Small Stepped Pipe Wedge is used for aligning pipe for fit up and welding. This small stepped wedge also features a built-in gauge. Hole in wedge allows for fall protection and an easy grab point for extraction. Small wedge measures 3/4-inches wide by 4-inches in length.Dimensions: 3/4 in. x 4 in.Steps: 3/32 in., 1/8 in., 5/32 in., 3/16 in., 1/4 in.Dual use as wedge and gauge.Pull or push for gap width adjustments.The stepped wedge allows for a full line of sight during pipe fit-up.Unique hole allows fall protection and wedge extraction.Wedge can be used to measure landings quickly and accurately.Durable construction allows wedge to be used to scrape, poke, and prod weld to remove slag, porosity, and identify defects.Can be used with a standard wedge or alone.
- Brand: B & B Pipe
- ASIN: B0799YR4QR
Rugged Tools Tradesman Tool Backpack - 28 Pocket Heavy Duty Jobsite Tool Bag Perfect Storage & Organizer for a Contractor, Electrician, Plumber, HVAC, Cable Repairman (Black/Orange)
Rugged Tools Tradesman Tool Backpack - 28 Pocket
HEAVY DUTY TOOL BACKPACK DESIGNED FOR ALL TRADES Whether you are a contractor, carpenter, HVAC repairman, plumber, framer, electrician, or cable & audio visual installer, this backpack has you covered. If you need to organize your tools and transport them from site to site, this is the tool bag for you. BUILT TO LAST Our tool bags have reinforced pockets and zippers to withstand the toughest abuse. Constructed of 1680D polyester, our tool backpacks are engineered to work in the toughest environments. 28 POCKETS TO STORE ALL YOUR GEAR Organize all of your tools in one convenient place. The 28 different pockets are designed to hold your screwdrivers, wrenches, measuring tape, level, drill, electrical fish tape, electronics & more. MOLDED HARD BOTTOM TO KEEP YOUR TOOLS SAFE The molded bottom provides a flat surface to stand the tool backpack upright in any environment and elevates your tools so they do not become damaged. Water, mud, or snow, you can be sure that your tools remain safe and dry. PRODUCT FEATURES 28 Total Pockets (25 tool pockets, 2 exterior pockets, 1 large interior pocket suitable for a small tablet) Constructed from Heavy Duty 1680 Denier Polyester Semi-hard Shell Case Molded hard bottom to keep the backpack upright and your tools out of the elements Padded s...
- Color: Black/Orange
- Brand: Rugged Tools
- ASIN: B074S43KCD
- UPC: 819615020415
Funny Pipe Fitters Hourly Rate Shirt Wrench Men Labor Rate
Funny Pipe Fitters Hourly Rate Shirt Wrench Men
This funny Pipe Fitters Shirt is a perfect gift for your brother, dad, boyfriend or husband. Great to wear while working with tools. Show your labor or hourly rates with this funny Pipe Fitters tee.
- Color: Black
- Brand: Pipe Fitters Fix Things T-Shirts
- ASIN: B07DH86226
Rapidesign Isometric Piping Template, 1 Each (R43)
Rapidesign Isometric Piping Template, 1 Each
Rapidesign Isometric Piping Template facilitates easily understood perspective drawings in construction work of refineries, gas and water distribution systems, sprinklers and other complicated piping work. Contains symbols of all components of piping systems; valves, flanges, elbows, reducers, caps and pumps. Template can be tilted three ways: one each of the three planes of a perspective view. Made in USA. Rapidesign has the world's largest selection of drafting templates for architects, builders, engineers and graphic designers.
- Brand: RAPIDESIGN
- ASIN: B001E1V56W
- UPC: 014173253583
Pocket Rocket: Pipe/Diameter Caliper and Ruler - Fractional – Black Anodized Aluminum
Pocket Rocket: Pipe/Diameter Caliper and Ruler - Fractional
The Pocket Rocket is a unique outside diameter caliper created and manufactured by Oregon Rule Co. The Pocket Rocket is a tool often useful to Engineers, Draftsmen, Pipe-fitters, Contractors, Carpenters, Plumbers, and related industries. This is a fractional measuring unit, which reads in inches. This Pocket Rocket can measure pipe sizes up to 16" in diameter. A conversion chart printed on the caliper translates measurements of the outside diameter to the nominal interior diameter dimension. Also, there is a conversion chart that reads from fractional to decimal. The swing arm can extend into a 14" long ruler. These calipers are made from a durable lightweight black anodized aluminum. Similar Products (Search Amazon by ASIN) ASIN: B00GS7O3K2 - Pocket Rocket: Pipe / Diameter Caliper and Ruler - Fractional - 3 Pack - White Styrene ASIN: B00H88GABU - Pocket Rocket: Pipe / Diameter Caliper and Ruler - Fractional - Clear ASIN: B00GR9KKPI - Mini-Rocket: Mini Pipe / Diameter Caliper and Ruler - Fractional - 5 Pack ASIN: B00GS5WYF0 - Mini-Rocket: Mini Pipe / Diameter Caliper and Ruler - Fractional - Black Anodized Aluminum ASIN: B00GS6S9AI - Mini-Rocket: Mini Pipe / Diameter Caliper and Ruler - Metric - 5 Pack
- Color: Black
- Brand: Oregon Rule Co.
- ASIN: B00GS7X4CK
- UPC: 046577841417
SharkBite Deburring Pipe and Depth Gauge Tool, Copper, CPVC, Pipe, 1/4 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch, 1 inch, U702A
SharkBite Deburring Pipe and Depth Gauge Tool, Copper,
" SharkBite Deburr & Depth Gauge Tool Our 2-in-1 tool is designed to simplify your plumbing project when using copper or CPVC tubing. Use it to remove burrs from copper pipe or CPVC pipe and to mark correct insertion depth for SharkBite fittings. The mark is used to confirm that the fitting is seated correctly to ensure a watertight connection. CUT. PUSH. DONE.The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal. Connect pipe in seconds with relative ease using any SharkBite Push-To-Connect fitting. No soldering, clamps, glue required. It's as simple as inserting the pipe into the fitting deep enough to be sealed by our specially-formulated O-ring. The Shark Bite PEX tubing cutters are an integral tool in the easy-to-install SharkBite Connection System. Our product works with your existing plumbing, is easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. Perfect for joining Copper, PEX, CPVC or PE-RT pipe, SharkBite is the no-fuss way to fix small leak...
- Color: Orange
- Brand: SharkBite
- ASIN: B000K6QFSU
- UPC: 074994326019
Jackson Safety Curv O Mark Centering Head Pipe Marker (14775), Standard #6
Jackson Safety Curv O Mark Centering Head Pipe
When it comes to getting the job done right – with no fuss – you need the right tools. Pipefitters know that the CurvOMark Contour Centering Head (Standard #6) is a reliable choice for setting centerlines, establishing marks and angles for butt-ins, locating points inside pipes and tanks and laying out keyways and measuring declivity. This centering tool is designed for pipe marking on pipes a half inch in diameter and larger. It features a Y-type head and is fitted with an adjustable dial bubble protractor (DSL) and a manually operated hardened centering pin (you'll need a small hammer or mallet to tap the pin mark into the pipe). Since it's a manual pipe centering head, it virtually eliminates the potential for equipment malfunction. You'll definitely want to add this center finder to your arsenal of pipe welding tools.
- Color: jackson
- Brand: Jackson Safety
- ASIN: B005DWMA5I
- UPC: 024886073842
Sumner Manufacturing 781235 Qwik Pins, Carbon Flange Pins, 5/8" - 1-5/8", Sold per Pair
Sumner Manufacturing 781235 Qwik Pins, Carbon Flange Pins,
Qwik Pins Simple Operation: (1) Push the spring-loaded button (2) Separate pin from nut (3) Insert into top two flange holes (4) Push spring button and reinsert onto pin (5)Quarter turn to tighten.
- Brand: Sumner Manufacturing
- ASIN: B004QXPSYA
- UPC: 661165812350
Flange Wizard 53076-M Centering Head Tools, 8" - 48" Pipe Capacity, Standard
Flange Wizard 53076-M Centering Head Tools, 8" -
Designed to establish and mark a centerline at any angle around the circumference (inside or outside) on a pipe or tank. Use it as a protractor level, or remove and use the hardened center punch for other marking jobs. Magnetic.
- Brand: Flange Wizard
- ASIN: B002A68HPW
- UPC: 672435530768
Sumner ST-881 Hi Fold-A-Jacks with V-Head
Sumner ST-881 Hi Fold-A-Jacks with
Quick action lock washer for fast height positioning. Patented Fall Guard feature allows 1quot; safety zone around lock washer. Set screw can lock jack head to stand for transportation - no loose pieces. Jack independently load tested for quality assurance
- Brand: Sumner
- ASIN: B002N2I3BG
- UPC: 661165813005
Chico's Pipe Fitters Pocket Cards
Toughbuilt KP-G3 Gelfit Thigh Support Stabilization Knee Pads - Ergonomic Fit
Toughbuilt KP-G3 Gelfit Thigh Support Stabilization Knee Pads
The ToughBuilt GelFit Fanatic - Thigh Support Stabilization Knee Pads are the new benchmark for all-day kneeling ergonomics, comfort and functionality. Provides ultimate stability while maintaining easy side-to-side movement. Integrated thigh support keeps the knee perfectly centered, never twisting out of the kneepad. The lower platform raises the shin off of the ground alleviating pressure on the ankles. Ergonomic gel and foam design embraces the natural shape of the knee and upper shin, maximizing pressure distribution for an extremely comfortable fit. Features and Benefits Comfortable GelFit gel and foam design Ergonomically shaped to embrace the knee, upper shin and thigh Ultimate stability combined with easy side-to-side agility Thigh support keeps knee ergonomically centered within kneepad Kneepad never rotates off of knee Lower platforms raise shins off of the ground alleviating pressure on the ankles Maximizes pressure distribution for all-day comfort Kneepad never rotates off of knee Abrasion-resistant 1680D fabric Rugged double-injected shell with non-slip rubber Hard-wearing, shatter-resistant plastic PVC rubber logos Scratch-resistant pad print graphics Heavily textured on contact surfaces Combination elastic/EVA/buckle thigh and calf straps comfor...
- Color: black
- Brand: ToughBuilt
- ASIN: B0140V9LWC
- UPC: 646635199537
PipeMaster Pipe Kit
The welder's tool for contour fits! The Perfect Tool for Automotive Welding, Marine Welding, Industrial Welding * Layout complicated tube joints in seconds! * Simple to use! (Just press, transfer, and trace). * Extremely accurate! (Good fit means good welds). * Save time! (Eliminate recutting and grinding). * Eliminate wasted material!
- Brand: Pipemaster
- ASIN: B01B3QD1EQ
- UPC: 741355700015
19-Pack Union Hard Hat, Tool Chest, Lunch Box Stickers | 100% Vinyl | Proudly MADE IN USA! Funny decals Construction, Electrician, Oilfield, Military, Fire Crew, Mechanic | Display your American Flag!
19-Pack Union Hard Hat, Tool Chest, Lunch Box
Adding high quality stickers to your lunch pail and toolbox is the easiest and most fun way to stand out and bring humor and union pride to your crew everyday! Our hardhat stickers are 100% VINYL, MADE IN THE USA, incredibly DURABLE (WATERPROOF & UV resistant, Anti-Wrinkling, Anti-Shrinking, Anti-Stretching), and easy to apply to any curved surface, gear or anywhere you want to display your American pride and sense of humor. Whether you are on the jobsite, production line, fire crew or in the garage, we have you covered for years to come. Our Speed Square Tools 19-Pack Union Sticker Set is HIGHLY VISIBLE and INCREDIBLY DETAILED. Perfect as a reward for the efforts of your crew or as a gift or stocking stuffer for the hard worker in your life. ALL OF THE STICKERS PICTURED ARE INCLUDED IN THE 19-PACK! Reasons to order the 19-Pack Hard Hat Sticker Set today: Stand out from the crowd and display your American Pride! Backed by our 100% Money Back Guarantee! Proudly MADE IN USA using high quality materials and adhesives. 19 Unique Designs to dress up your hard hat, helmet, toolbox and have some left over to give to your buddies. AMAZON PRIME eligible shipping means you will have them ASAP! Click the Add to Cart Button NOW and we will ship them to you RIGHT AWAY!
- Color: Union
- Brand: SpeedSquare Tools
- ASIN: B078HG6L9W
- UPC: 689355407049
Master Marker Off/On Magnet In Carrying Case
Master Marker Off/On Magnet In Carrying
Flange Wizard Master Markers with On/Off Magnet Features newest on/off magnet technology. Unique design allows you to telescope out over existing welds to layout angles or change the angles of pipe fittings. Designed to accommodate 8 in to 48 in beams or 48 in structural beams. Contains 360° rotating shaft with a built-in leveling vial. Constructed of anodized aluminum. Comes with sturdy polypropylene storage case. Simplifies the process of making structural beam layouts and marking angles or saddles on pipe Pack of 1
- Brand: Flange Wizard
- ASIN: B01HXMCFFU
- UPC: 672435555105
Two Hole Pins. Small. 1/2" by 1-1/8" Aluminum.
Two Hole Pins. Small. 1/2" by 1-1/8"
1/2"to 1-1/8" O.D. Two hole Pins, for leveling flanges on pipe, prior to being welded. These have Knurled nuts for fast action, and common 1/2"-13 threads, that are removable for replacement, or customizable lengths. These are also turned on the threads for EXTREME accuracy.
- ASIN: B00JV9O21Y
- UPC: 738759744523
Turbospoke Bicycle Exhaust System (New Updated)
Turbospoke Bicycle Exhaust System (New
Vrooom! Turn your bicycle into a lean, mean, trail riding machine with Turbospoke, the Bicycle Exhaust System. Remember putting baseball cards into the spokes of your bicycle to create motorcycle sounds? Turbospoke takes it to the next level. Use one of the three, specially designed Motocards to get the unique motorcycle sound effect you want. The cards are durable and waterproof for long-lasting, hard-charging fun. The specially designed Megaphone Exhaust Pipe amplifies the sound creating a realistic motorcycle roar! The sound starts the moment you start pedalling, the harder you ride the better it sounds. But that's not all, the all new Turbospoke Bicycle Exhaust System can be fitted to either side of your bike, meaning you can fit 1 or 2 pipes - double the looks, double the sound, double the fun.
- Brand: Turbospoke
- ASIN: B07K1LPBBY
- UPC: 872329000142
Ginode Hi-Lo Welding Gauge Gage Test Ulnar Welder Inspection Gauge Tool Test Ulnar Welder Inspection for Welding Measurement Tools
Ginode Hi-Lo Welding Gauge Gage Test Ulnar Welder
▲Specification: ● Material: Stainless steel ● Color: Silver ● Size: (Approx.) 6.18" x 2.48" ● Type: Welding gauge inspection ▲Features: ● Can be calibrated to NBS standard. ● Made of stainless steel, is not easy to bend, accuracy of reading. ● Measurements read in standard on one side, and metric on the opposite side. ● Polished, bright and clean without burr, rust laser engraved line and will not rub off. ● Changes from standard to metric simply remove gauge body, turn scales over and replace body. ● Measures internal alignment of pipe after fit-up/ alignment, cuts radiographic rejects as well as of pipe before and after tacking. ● Appplication: Measure internal misalignment, fit- up gap, bevel on end preparation, the crown height of welds, fillet weld size, scribed line, socket welds ▲Application: ● Measure internal misalignment ● Measure fit- up gap Measure bevel on end preparation ● Measure the crown height of welds ● Measure fillet weld size ● Measure scribed line, socket welds
- Brand: Ginode
- ASIN: B079FYYMQ6
- UPC: 764560284163
3 PC PIPE-PRO MEKIT Metal Cutting Guide Set, Steel by Pipe-Pro
3 PC PIPE-PRO MEKIT Metal Cutting Guide Set,
Item : Metal Cutting Guide Set;Type : Steel;Application : For Cutting Pipe At 22 Degrees , 45 Degrees , 90 Degrees & Saddle Cuts;Includes : 1-7/8, 2-3/8, 2-7/8;Function : Place Cutting Guide Around Pipe. Trace Around Guide. Remove Guide And Cut Pipe
- Color: Blue and Red
- Brand: Pipe-Pro
- ASIN: B01LYSXQQ1
LED Headlamp,Brightest and Best 6000 LM XML-T6 Hunting LED Headlights,IMPROVED LED Zoomable 4 Modes Runners Headlamps for Hiking Head Lamp,Camping,Reading,Fishing,Hunting,Outdoor Sports Headlamps
LED Headlamp,Brightest and Best 6000 LM XML-T6
Purpose: This kind of headlamp features the CREE XM-L2 T6 LED lights which are adjustable for meeting your different needs. In addition, the headlamp comes with an adjustable base which will enable you to change the light direction freely. It is suitable for the outdoor activities, such as cycling, camping, traveling, hiking and etc. Brightness: 6000 lumens max Product weight: 200g, 10.6 oz Item Type: Headlamps Light Source: 3 LED Bulbs Model of LED Beads: XM-L2 T6 Battery Type: Lithium Ion Wattage: 20 w Waterproof: Yes Light Color: White Switch Mode: High/Middle/Low/Flashing Material: Aluminum Alloy Battery: 2* 3000mAh 3.7v Package: 1x 6000 Lumen 3 LED Headlamp 1x Wall Charger 1x USB Car charger cable 2 x 18650 batteries Note: Please remove the plastic film wrapped on the batteries before use. The batteries need 8 hours to be fully charged. Avoid using your headlamp while charging.
- Color: Gold
- Brand: UVER
- ASIN: B071WM987Y
- UPC: 730440068079
IRWIN VISE-GRIP Original Locking Chain Clamp, 9", 27ZR
IRWIN VISE-GRIP Original Locking Chain Clamp, 9",
The IRWIN VISE-GRIP Original Locking Chain Clamp is ideal for clamping irregularly shaped objects up to 18" in circumference. Constructed of high-grade heat-treated alloy steel for durability, it features the classic trigger release for maximum locking force and turn screw adjustment to fit work and stay adjusted for repetitive use. Backed by the IRWIN Lifetime Guarantee.
- Brand: IRWIN
- ASIN: B00004SBCB
- UPC: 784497259188