SRS 97-01 Prelude SH catback exhaust system SRS-CBEX-HP9701SH

SRS 97-01 Prelude SH catback exhaust system

SR*S catback exhausts are made with T-304 stainless steel, CNC machine flanges and mandrel bent, with a polish finish for the best possible looks and performance. All of our exhaust systems are guaranteed to have a deep tone, smooth, throaty clean sound. SR*S single exhausts models are 2.5 inch piping and a 4.5 inch tip for most models. There is no welding required, and we guarantee good fitment with direct bolt-on and easy installation.

  • Brand: SR*S Tuning
  • ASIN: B00BHI95PK

DNA Motoring CBE-HP97-BT CBEHP97BT Stainless Steel Catback Exhaust System

DNA Motoring CBE-HP97-BT CBEHP97BT Stainless Steel Catback Exhaust

Upgrading vehicle's exhaust system is a great way to build horsepower, free up trapped torque, and improve upon restrictive factory systems. The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make a world of difference on your vehicle. The net result is lower auto exhaust backpressure, more horsepower, more torque, and a much better sound.

  • Color: Burnt Muffler Tip
  • Brand: DNA MOTORING
  • ASIN: B00TY3ANWY
  • UPC: 842765119258

Invidia (HS97HP1GTP) N1 Cat-Back Exhaust System with Stainless Steel Tip for Honda Prelude

Invidia (HS97HP1GTP) N1 Cat-Back Exhaust System with Stainless

For a good balance of price and performance, Invidia offers the motorsports enthusiasts a strong line-up of Invidia N1 Exhaust is constructed with high-quality SUS304 stainless steel, CNC-machined flanges, and manufactured with a polished finish. Each system features mandrel-bent stainless steel piping for maximum exhaust flow and reduced back pressure. These exhausts are engineered to produce strong mid to top-end power gains, as well as an increase in horsepower and torque.

  • Brand: Invidia
  • ASIN: B000ECP75C

Yonaka Compatible with Honda Prelude 1997-2001 2.5" Stainless Steel Performance Catback Exhaust

Yonaka Compatible with Honda Prelude 1997-2001 2.5" Stainless

YONAKA MOTORSPORTS Fully Polished Stainless Steel Catback Exhaust Mandrel Bent Piping with 4.25'' Tip Yonaka part# YMCB-PRE9701Honda Prelude 1997-2001 Catback ExhaustWill fit: 1997-2001 Honda Prelude(will NOT fit SH model) This Yonaka Motorsports catback exhaust system is made of fully polished stainless steel, with 2.5'' OD mandrel bended piping, and a 4.25'' tip. Expect a quiet, clean, deep hum, without that irritating mid range raspy sound. Direct bolt-on fit to OEM. All installation hardware is included.Brand new in the box, never installed. Yonaka Motorsports is a grassroots performance part manufacturer since 2001, specializing mostly in Honda/Acura. Today they have expanded their product line to meet the needs of Lexus, Mazda, Subaru, Mitsubishi, Toyota, Nissan, GM, and Ford.

  • Brand: Yonaka Motorsports
  • ASIN: B00KTM5Q0I

For Honda Prelude Catback Exhaust System 4 inches Burn Tip Muffler - BB6 H22A4

For Honda Prelude Catback Exhaust System 4 inches

Upgrading vehicle's exhaust system is a great way to build horsepower, free up trapped torque, and improve upon restrictive factory systems. The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make a world of difference on your vehicle. The net result is lower auto exhaust backpressure, more horsepower, more torque, and a much better sound.Package Included:1 x Catback Exhaust SystemCompatible with:97-01 Honda Prelude Coupe 2.2L

  • Color: Burn Tip
  • Brand: Auto Dynasty
  • ASIN: B00KFSSW2A

Fit 1997-2001 Honda Prelude (Type SH Coupe 2-Door Model Only) 2.25 Inch Stainless Steel Catback Exhaust System 4.5 Inch Muffler Tip

Fit 1997-2001 Honda Prelude (Type SH Coupe 2-Door

Upgrading vehicle exhaust system is a great way to build horsepower, free up trapped torque, and improve upon restrictive factory systems. The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make a world of difference on your vehicle. The net result is lower auto exhaust backpressure, more horsepower, more torque, and a much better sound. 100% Brand New, never been used The catback is made out of T-304 stainless steelTip Diameter: 4.5 Inch with Silencer , Piping Diameter:2.25 inch N1 Style straight tip Design Increases 10 -20 Horsepower/ Low End Torque Optimize power band mid range to high RPM power Aggressive Deep Sound while Ensures Smooth Exhaust Gas Flow Increase Engine Output and Efficiency Fitment: Fit 1997-2001 Honda Prelude (Type SH Coupe 2-Door Model Only) Professional Installation is Highly Recommended (No Instruction Included)

  • Brand: Morakot Racing
  • ASIN: B07JQ47XF4
  • UPC: 754472869220

Skunk2 413-05-2015 MegaPower Exhaust System for Honda Prelude

Skunk2 413-05-2015 MegaPower Exhaust System for Honda

Skunk2's 60 millimeter MegaPower exhaust system for the Prelude is constructed of T-304 stainless steel, is robotically TIG welded, and features CNC mandrel bends for a precise fit. Skunk2's cat-back, bolt-on MegaPower systems are designed for mildly modified, naturally aspirated engines featuring basic bolt-ons that require more exhaust flow than the OEM exhaust system can provide.

  • Brand: Skunk2 Racing
  • ASIN: B008L0FV96
  • UPC: 873265001309

For Honda Prelude BB Stainless Steel 4 inches Rolled Muffler Tip Catback Exhaust System

For Honda Prelude BB Stainless Steel 4 inches

Upgrading vehicle's exhaust system is a great way to build horsepower, free up trapped torque, and improve upon restrictive factory systems. The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make a world of difference on your vehicle. The net result is lower auto exhaust backpressure, more horsepower, more torque, and a much better sound.Package Included:1 x Catback Exhaust SystemCompatible with:92-96 Honda Prelude

  • Brand: Auto Dynasty
  • ASIN: B017I0RZP2

For Honda Prelude Catback Exhaust System 4 inches Tip Muffler - BB H22 H23

For Honda Prelude Catback Exhaust System 4 inches

Upgrading vehicle's exhaust system is a great way to build horsepower, free up trapped torque, and improve upon restrictive factory systems. The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make a world of difference on your vehicle. The net result is lower auto exhaust backpressure, more horsepower, more torque, and a much better sound.Package Included:1 x Catback Exhaust SystemCompatible with:92-96 Honda Prelude

  • Color: Chrome
  • Brand: Auto Dynasty
  • ASIN: B00OTMKU2I

For Honda Prelude BB6 H22 Stainless Steel 4 inches Rolled Muffler Tip Catback Exhaust System

For Honda Prelude BB6 H22 Stainless Steel 4

Upgrading vehicle's exhaust system is a great way to build horsepower, free up trapped torque, and improve upon restrictive factory systems. The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make a world of difference on your vehicle. The net result is lower auto exhaust backpressure, more horsepower, more torque, and a much better sound.Package Included:1 x Catback Exhaust SystemCompatible with:97-01 Honda Prelude Coupe 2.2L

  • Brand: Auto Dynasty
  • ASIN: B017MSMNHK

2.25" Jdm Gunmetal Catback Exhaust System Stainless Steel with 4" Tip For Honda Prelude

2.25" Jdm Gunmetal Catback Exhaust System Stainless Steel

100% Brand new item, Never used or installed Super light weight SUS-304 Stainless Steel Prewelded hangers for easy and quick installation, not requiring cutting or welding as universal muffler do Designed for high performance with build in resonator to help meet sound level standards With its deep throaty rumble tone for unmistakable boxter sound, it echoes its racing lineage Will dramatically improve turbo response and high RPM / HP Optimize power band mid rang to high RPM power Compatible with OEM and aftermarket downpipe Racing spec design to gain more horse power, faster response, averaging 15-20 Extra HP 4" exhaust tip with a ~60MM piping (~2.25" Inch) All necessary hardware and gasket are included as show in the picture Color: Gunmetal Muffler / Polish Piping NOTES Please remember to check all current exhaust rubber bushings to makes sure they are still able to be reused before installing Professional installation is highly recommended as there are no installation guides included with items FITMENT 1992-1996 Honda Prelude

  • Brand: AJP Distributors
  • ASIN: B0108081BG

J2 Engineering 3.5 inches Muffler Tip Catback Exhaust System for Honda Prelude BB6 H22

J2 Engineering 3.5 inches Muffler Tip Catback Exhaust

Upgrading vehicle's exhaust system is a great way to build horsepower, free up trapped torque, and improve upon restrictive factory systems. The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make a world of difference on your vehicle. The net result is lower auto exhaust backpressure, more horsepower, more torque, and a much better sound.Package Included:1 x Catback ExhaustCompatible with:97-01 Honda Prelude

  • Brand: Auto Dynasty
  • ASIN: B01EBRFDHC

Megan Racing MR-MU-MOE2.5 2.5" Cat Back Exhaust System

Megan Racing MR-MU-MOE2.5 2.5" Cat Back Exhaust

With law enforcement becoming ever more strict with modifying your vehicle with performance parts, the need for more discreet performance parts have increased to keep a low profile. These are more discreet to law enforcement and offer a deeper more mellow tone due to the increased amount of packing that is contained within the muffler casing.

  • Brand: Megan Racing
  • ASIN: B00D3TD1U6
  • UPC: 788536923689

DNA Motoring CBE-HP92-NRT CBEHP92NRT Stainless Steel Catback Exhaust System

DNA Motoring CBE-HP92-NRT CBEHP92NRT Stainless Steel Catback Exhaust

Upgrading vehicle's exhaust system is a great way to build horsepower, free up trapped torque, and improve upon restrictive factory systems. The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make a world of difference on your vehicle. The net result is lower auto exhaust backpressure, more horsepower, more torque, and a much better sound.

  • Brand: DNA MOTORING
  • ASIN: B01EZHDOD8
  • UPC: 842765119234

For Honda Prelude 4-2-1 Design Stainless Steel Exhaust Header Kit - H22

For Honda Prelude 4-2-1 Design Stainless Steel Exhaust

The exhaust manifold found on the 1993-1996 Honda Prelude DOHC 4 Cylinder Engine were designed to combine the exhaust gasses from each of the cylinders quickly with a manifold that was cost effective to produce. Our 4-2-1 Tri-Y off-road racing headers are designed to allow the exhaust gasses to flow more freely from each cylinder and combine in a more efficient manner. Tubing has been optimized for the 2.2L engine. This creates a reduction in cylinder backpressure and improved exhaust gas velocity. These improvements free up lost horsepower and torque. An added benefit is a more performance oriented exhaust sound.Package Included:1 x Set of Header Exhaust SystemCompatible with:93-96 Honda Prelude VTEC H22

  • Color: Polished Chrome
  • Brand: Auto Dynasty
  • ASIN: B00JA1CFF8

Yonaka Acura Integra 94-01 DC2 Full Performance Catback Exhaust 2DR Coupe Only

Yonaka Acura Integra 94-01 DC2 Full Performance Catback

Yonaka 94-01 Acura Integra 2DR Catback Exhaust Yonaka Part# YMCB002 Compatibilities: 1994-2001 Acura Integra LS/RS/GS (2DR Coupe Only) 2000-2001 Acura Integra GS-R (2DR Coupe Only) 1998-2001 Acura Integra Type-R This Yonaka Motorsports catback exhaust system is made of fully polished stainless steel, with 2.5" OD mandrel bended piping, and a 4.25" tip. Expect a quiet, clean, deep hum, without that irritating mid range raspy sound. Direct bolt-on fit. All installation hardware is included. Yonaka Motorsports is a grassroots performance part manufacturer since 2001, specializing mostly in Honda/Acura. Today they have expanded their product line to meet the needs of Lexus, Mazda, Subaru, Mitsubishi, Toyota, Nissan, GM, and Ford.

  • Brand: Yonaka Motorsports
  • ASIN: B009R6ZR0G

DNA MOTORING HFC-ADJ-HA90 HFCADJHA90 Stainless Steel Exhaust Performance Pipe

DNA MOTORING HFC-ADJ-HA90 HFCADJHA90 Stainless Steel Exhaust Performance

The most restrictive part of any exhaust system is the catalytic converter. The stock catalytic converter is meant to filter the flow of exhaust gases to reduce the amount of harmful gases into the atmosphere. Because of this, lots of potential performance is restrained. High Flow Test Pipes eliminate the stock catalytic converter and reduce exhaust backpressure. The result brings out the vehicle's performance potential by giving it a free high flowing exhaust system. Replace for 88-01 Honda Prelude90-93 Honda Accord

  • Brand: DNA MOTORING
  • ASIN: B01F8EEM06
  • UPC: 842765116455

MagnaFlow 408034 Universal Catalytic Converter (CARB Compliant)

MagnaFlow 408034 Universal Catalytic Converter (CARB

MagnaFlow universal catalytic converters form the basic building blocks for a comprehensive line of direct-fit applications. The main benefit of the universal catalytic converter is that one unit may cover a wide variety of vehicle makes and models. Installing universal converters often requires the use of welding, cutting and tube bending equipment that is readily available to most professional installers. All California state catalytic converters are torca compliant. Converters in this catalog are based on executive orders issued by the California air resource board and must be used in accordance with this information. In California, it is illegal to select a catalytic converter for installation based solely on vehicle weight and engine size.

  • Brand: MagnaFlow Exhaust Products
  • ASIN: B00FG9NO08
  • UPC: 841380096029

For Honda Prelude 2.25" To 2.5" Catback Exhaust Muffler System Performance Racing Stainless Steel

For Honda Prelude 2.25" To 2.5" Catback Exhaust

100% Brand New Items, Never Used Or Installed High Performance Stainless Steel Catback Exhaust System CNC Machined T-304 Mandrel Bent Stainless Steel Piping And TIG Welded Steel Flanges Made By OEM Approved and ISO Certified Manufacturers With Materials That Meets Or Exceeds Strict OEM Requirements Direct Bolt-On Fitment; No Modifications Required Specifications (Estimated): Tip Diameter: 4.5"/ 114.3mm Piping Diameter: 2.25 ~ 2.5" / 57.15mm ~ 63.5mm Includes Removable Silencer And Pictured Hardware No Installation Guides Are Included, We Highly Recommend To Seek Professional Installation FITMENT 1992-1996 Honda Prelude (2.2L/2.3L F22A1/ H22A1/ H23A1)

  • Brand: AJP Distributors
  • ASIN: B019T2R3SG

DNA Motoring HDS-HP92H23 Racing Exhaust Header

DNA Motoring HDS-HP92H23 Racing Exhaust

The exhaust manifold found on the 1992-1996 Honda prelude 4 cylinder engine were designed to combine the exhaust gasses from each of the cylinders quickly with a manifold that was cost effective to produce. Our 4-2-1 tri-y off-road racing headers are designed to allow the exhaust gasses to flow more freely from each cylinder and combine in a more efficient manner. Tubing has been optimized for the 2.3l engine. This creates a reduction in cylinder backpressure and improved exhaust gas velocity. These improvements free up lost horsepower and torque. An added benefit is a more performance oriented exhaust sound.

  • Color: Polished
  • Brand: DNA MOTORING
  • ASIN: B01KA6D6SG
  • UPC: 817598020149

SRS Prelude NON SH catback exhaust system SRS-CBEX-HP9701NSH

SRS Prelude NON SH catback exhaust system

SR*S catback exhausts are made with T-304 stainless steel, CNC machine flanges and mandrel bent, with a polish finish for the best possible looks and performance. All of our exhaust systems are guaranteed to have a deep tone, smooth, throaty clean sound. SR*S single exhausts models are 2.5 inch piping and a 4.5 inch tip for most models. There is no welding required, and we guarantee good fitment with direct bolt-on and easy installation.

  • Brand: SR*S Tuning
  • ASIN: B00BHI94TM

Invidia (HS97HP1G3T) Q300 Cat-Back Exhaust System with Titanium Rolled Tip for Honda Prelude

Invidia (HS97HP1G3T) Q300 Cat-Back Exhaust System with Titanium

The flat bottom shaped muffler design results in improved high speed aerodynamic performance. The muffler inside contains continuous piping design and use of Advantex material that results in an excellent free-flow exhaust with optimized back pressure, giving greater horsepower, torque gains and a rich deep sporty sound. The use of SUS304 polished stainless steel piping, Mandrel bent to shape, state of the art CNC machine made flange, Robot TIG welding and double wall polished stainless steel or Titanium tips, provides outstanding durability and appearance.

  • Brand: Invidia
  • ASIN: B006GDLNMO

DNA MOTORING HDS-HP97-NS-41 HDSHP97NS41 Stainless Steel Exhaust Header Manifold

DNA MOTORING HDS-HP97-NS-41 HDSHP97NS41 Stainless Steel Exhaust Header

The exhaust manifold found on the 1997-2000 Honda Prelude DOHC 4 Cylinder Engine were designed to combine the exhaust gasses from each of the cylinders quickly with a manifold that was cost effective to produce. Our 4-2-1 Tri-Y off-road racing headers are designed to allow the exhaust gasses to flow more freely from each cylinder and combine in a more efficient manner. Tubing has been optimized for the 2. 2L engine. This creates a reduction in cylinder backpressure and improved exhaust gas velocity. These improvements free up lost horsepower and torque. An added benefit is a more performance oriented exhaust sound. Replace for 97-01 Honda Prelude Non Type-SH

  • Brand: DNA MOTORING
  • ASIN: B00WVOXHL2
  • UPC: 842765122890

Eastern 70318 Catalytic Converter (Non-CARB Compliant)

Eastern 70318 Catalytic Converter (Non-CARB

Eastern 70318 Catalytic Converter

  • Brand: Eastern Industries
  • ASIN: B000C1QOGQ
  • UPC: 606729703187

For 92-96 Honda Prelude H23 High Performance 4-2-1 Design Stainless Steel Exhaust Header

For 92-96 Honda Prelude H23 High Performance 4-2-1

The exhaust manifold found on the 1992-1996 Honda Prelude 4 Cylinder Engine were designed to combine the exhaust gasses from each of the cylinders quickly with a manifold that was cost effective to produce. Our 4-2-1 Tri-Y off-road racing headers are designed to allow the exhaust gasses to flow more freely from each cylinder and combine in a more efficient manner. Tubing has been optimized for the 2.3L engine. This creates a reduction in cylinder backpressure and improved exhaust gas velocity. These improvements free up lost horsepower and torque. An added benefit is a more performance oriented exhaust sound.Package Included:1 x Set of Header Exhaust System Necessary Hardware, such as Gasket(s) and Bolt(s)Compatible with:92-96 Honda Prelude H23

  • Color: Polished Chrome
  • Brand: Auto Dynasty
  • ASIN: B07H4HR47Q

For Honda Prelude 2.3 BB2 Stainless Steel 4-1 Header/Exhaust Tubular Manifold

For Honda Prelude 2.3 BB2 Stainless Steel 4-1

The exhaust manifold found on the 1992-1996 Honda Prelude 4 Cylinder Engine were designed to combine the exhaust gasses from each of the cylinders quickly with a manifold that was cost effective to produce. Our 4-1 Tri-Y off-road racing headers are designed to allow the exhaust gasses to flow more freely from each cylinder and combine in a more efficient manner. Tubing has been optimized for the 2.3L engine. This creates a reduction in cylinder backpressure and improved exhaust gas velocity. These improvements free up lost horsepower and torque. An added benefit is a more performance oriented exhaust sound.Package Included:1 x Set of Exhaust HeadersCompatible with:92-96 Honda Prelude H23

  • Brand: Auto Dynasty
  • ASIN: B00WVNHTP8

Invidia 97-00 Prelude N1 Cat-back Exhaust Fits BASE Model ONLY (hs97hp1gtp)

Invidia 97-00 Prelude N1 Cat-back Exhaust Fits BASE

For a good balance of price and performance, Invidia offers the motorsport enthusiasts a strong line-up of Invidia N1 Exhausts. Each Invidia Exhaust is constructed with high quality SUS304 Stainless Steel, CNC-machined flanges, and manufactured with a polished finish. Each system features mandrel-bent stainless steel piping for maximum exhaust flow and reduced back pressure. These exhausts are engineered to produce strong mid to top-end power gains, as well as an increase in horsepower and torque.

  • Brand: Invidia
  • ASIN: B06XWQQKS4
  • UPC: 608067671517

Invidia 97-00 Prelude Q300 Titanium Tip Cat-back Exhaust Fits SH Model ONLY (hs97hp1g3t)

Invidia 97-00 Prelude Q300 Titanium Tip Cat-back Exhaust

The Invidia Q300 Exhaust features a flat bottom shaped muffler design results in improved high speed aerodynamic performance. The muffler inside contains continuous piping design and use of Advantex material that results in an excellent free-flow exhaust with optimized back pressure, giving greater horsepower, torque gains and a rich deep sporty sound. The use of SUS304 polished stainless steel piping, Mandrel bent to shape, state of the art CNC machine made flange, Robot TIG welding and double wall polished stainless steel or Titanium tips, provides the Invidia Q300 Exhaust with outstanding durability and appearance.

  • Brand: Invidia
  • ASIN: B06XWS5M4R
  • UPC: 608067671500

MagnaFlow 14815 Exhaust Muffler

MagnaFlow 14815 Exhaust

MagnaFlow performance exhaust has universal mufflers available for many applications in various sizes and configurations to fit your needs. MagnaFlow universal mufflers are a great addition since they not only improve your vehicle performance but also give it that show-stopping look.

  • Brand: MagnaFlow Exhaust Products
  • ASIN: B000CC9CDM
  • UPC: 841380003508

For Honda Prelude 4-2-1 Tri-Y Design Stainless Steel Exhaust Header Kit (Polished Chrome) H22 BA

For Honda Prelude 4-2-1 Tri-Y Design Stainless Steel

The exhaust manifold found on the 1992-1996 Honda Prelude 4 Cylinder Engine were designed to combine the exhaust gasses from each of the cylinders quickly with a manifold that was cost effective to produce. Our 4-2-1 Tri-Y off-road racing headers are designed to allow the exhaust gasses to flow more freely from each cylinder and combine in a more efficient manner. Tubing has been optimized for the H22 2.2L engine. This creates a reduction in cylinder backpressure and improved exhaust gas velocity. These improvements free up lost horsepower and torque. An added benefit is a more performance oriented exhaust sound.Package Included:1 x Header exhaust systemAll necessary installation hardwareCompatible with:1993-1996 Honda Prelude VTEC 2.2

  • Brand: Auto Dynasty
  • ASIN: B00NI73F7M

CNT 90 Degree Defouler with 2 Straight Defouler for Headers and Exhaust pipes

CNT 90 Degree Defouler with 2 Straight Defouler

  • Color: Chrome color
  • Brand: CNT Racing
  • ASIN: B016P42V4W

DNA MOTORING HDS-HP92H22 Racing Exhaust Header

DNA MOTORING HDS-HP92H22 Racing Exhaust

Getting more air into your engine and more exhaust out is the key to a performance motor. That's where exhaust headers is significant as the first revenue of an exhaust system. Exhaust performance headers manipulate the air flow with the performance-robbing exhaust manifold that came with your car. Headers provide each cylinder with its own mini exhaust pipe, which means exhaust headers prevent interference among cylinders thus, the backpressure that occurs in common exhaust manifolds. When cylinders don't have to fight with each other to expel their exhaust, they can put more power through the wheels, pushing the vehicle. Combining with a high performance cold air intake and a cat-back exhaust system, a header system removes all restrictions of your engine then, it is able to perform at its full potential.

  • Color: Polished
  • Brand: DNA MOTORING
  • ASIN: B01KA5MHUA
  • UPC: 817598020378

Denso 234-4622 Oxygen Sensor

Denso 234-4622 Oxygen

Denso Oxygen Sensor is designed to detect the amount of oxygen in the exhaust stream. It is constructed from high quality stainless steel, porous polytetrafluoroethylene, fluorine rubber, aluminum oxide, high-grade platinum and ceramics. This Sensor features double protection layer, aluminum oxide trap layer, porous PTFE filter and stainless steel housing. It is manufactured with precision to meet OE standards. This oxygen sensor can be installed easily and ensures longevity.

  • Color: Black
  • Brand: Denso
  • ASIN: B000C5SGA4
  • UPC: 042511146228

Skunk2 415-99-1470 2.25" Universal Muffler

Skunk2 415-99-1470 2.25" Universal

Skunk2's 2.25-inch Universal Mufflers are designed for maximum flow and power and are manufactured from high-quality, T-304 stainless steel and robotically TIG welded for precise fitment.

  • Brand: Skunk2 Racing
  • ASIN: B000ECL4GS
  • UPC: 873265001361

Flowmaster 942051 50 Delta Flow Muffler - 2.00 Offset IN / 2.00 Center OUT - Moderate Sound

Flowmaster 942051 50 Delta Flow Muffler - 2.00

Flow master 942051 50 Delta Flow Muffler - 2. 00 Offset IN / 2. 00 Center OUT - Moderate Sound

  • Color: Black
  • Brand: Flowmaster
  • ASIN: B0002Z9NKG
  • UPC: 700042015672

Walker 31383 Hardware Gasket

Walker 31383 Hardware

Walker, with our worldwide OE partnerships and manufacturing facilities, possesses the technical excellence needed to meet today's emissions control needs, while developing solutions for tomorrow's challenges. Walker is a 'one-stop' convenience, offering complete engine-to-tailpipe coverage of replacement emissions control systems and components for popular domestic and import vehicles in broadmarket, performance, and commercial vehicle applications. Walker delivers optimal OE-style fit, appearance, and dependability in aftermarket emissions control parts.

  • Brand: Walker
  • ASIN: B0019I9SV4
  • UPC: 086387313834

Denso 234-4011 Oxygen Sensor

Denso 234-4011 Oxygen

Denso Oxygen Sensor is designed to detect the amount of oxygen in the exhaust stream. It is constructed from high quality stainless steel, porous polytetrafluoroethylene, fluorine rubber, aluminum oxide, high-grade platinum and ceramics. This Sensor features double protection layer, aluminum oxide trap layer, porous PTFE filter and stainless steel housing. It is manufactured with precision to meet OE standards. This oxygen sensor can be installed easily and ensures longevity.

  • Color: Black
  • Brand: Denso
  • ASIN: B000C5SG40
  • UPC: 042511140110

Fit 1992-1996 Honda Prelude 2.25 Inch Stainless Steel Catback Exhaust System 4 Inch Gun Metal Muffler Tip

Fit 1992-1996 Honda Prelude 2.25 Inch Stainless Steel

Upgrading vehicle exhaust system is a great way to build horsepower, free up trapped torque, and improve upon restrictive factory systems. The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make a world of difference on your vehicle. The net result is lower auto exhaust backpressure, more horsepower, more torque, and a much better sound. 100% Brand New, never been used Super light weight SUS-304 Stainless SteelTip Diameter: 4 Inch with Silencer , Piping Diameter:2.25 inch Please remember to check all current exhaust rubber bushings to makes sure they are still able to be reused before installing Increases 10 -20 Horsepower/ Low End Torque Optimize power band mid range to high RPM power Aggressive Deep Sound while Ensures Smooth Exhaust Gas Flow Increase Engine Output and Efficiency Fitment: Fit 1992-1996 Honda Prelude Professional Installation is Highly Recommended (No Instruction Included)

  • Brand: Morakot Racing
  • ASIN: B07JP6D2K7
  • UPC: 754472869206

For Honda Prelude 2.2 VTEC BB1 Stainless Steel 4-1 Header/Exhaust Tubular Manifold

For Honda Prelude 2.2 VTEC BB1 Stainless Steel

The exhaust manifold found on the 1993-1996 Honda Prelude DOHC 4 Cylinder Engine were designed to combine the exhaust gasses from each of the cylinders quickly with a manifold that was cost effective to produce. Our 4-1 off-road racing headers are designed to allow the exhaust gasses to flow more freely from each cylinder and combine in a more efficient manner. Tubing has been optimized for the 2.2L engine. This creates a reduction in cylinder backpressure and improved exhaust gas velocity. These improvements free up lost horsepower and torque. An added benefit is a more performance oriented exhaust sound.Package Included:1 x Set of Exhaust HeadersCompatible with:93-96 Honda Prelude VTEC H22

  • Brand: Auto Dynasty
  • ASIN: B00WVNHW6Y

For Honda Accord/Prelude 13.5 inches-16 inches Adjustable 3pcs Stainless Steel Exhaust Pipe

For Honda Accord/Prelude 13.5 inches-16 inches Adjustable 3pcs

The most restrictive part of any exhaust system is the catalytic converter. The stock catalytic converter is meant to filter the flow of exhaust gases to reduce the amount of harmful gases into the atmosphere. Because of this, lots of potential performance is restrained. High Flow Test Pipes eliminate the stock catalytic converter and reduce exhaust backpressure. The result brings out the vehicle's performance potential by giving it a free high flowing exhaust system.Package Included:1 x Adjustable High Flow Exhaust Pipe HardwaresCompatible with:88-01 Honda Prelude90-93 Honda Accord

  • Brand: Auto Dynasty
  • ASIN: B01AKRG7BI
Similar Prelude Cat Back Exhaust Shopping Results