Honor & Joy Pivoting Coupler with 120 Degree and 5 Angle, for Pressure Washer Spray Nozzle . Safety Gear for extremely high reliability , Clean Hard to Reach Area Max 5000 PSI 1/4 Inch Quick Connect

Honor & Joy Pivoting Coupler with 120 Degree

Honor & Joy: Honor: It is our Great Honor to have you here and we always respect for every comment, advise, praise,  criticism, order, delivery, sales return. Joy: Producing amazing products and doing our best to off  a well-known service with a real Joy! All of our products come with full warranty that against quality defective for 12 months from date of purchase on Amazon, meanwhile we 100% follow Amazon Shopping Policy, you are entitled to a replacement or refund for quality defective. What about this product? 1. The Coupler easily adjusts 120 degrees for 5 different cleaning angles.  Strong safety gear make it safer and reliable to use,up to 5000psi. 2. Very practical and popular pressure washer accessory which is suitable for most pressure washers. 3. Ideal for gutter cleaning ,car chassis and  hard to reach areas.

  • Brand: Honor & Joy
  • ASIN: B07KT6MDY1
  • UPC: 727542182444

Martin S422 Spur Gear, 14.5° Pressure Angle, High Carbon Steel, Inch, 4 Pitch, 1-1/8" Bore, 6" OD, 2.000" Face Width, 22 Teeth

Martin S422 Spur Gear, 14.5° Pressure Angle, High

The Martin high carbon steel gear with 14.5-degree pressure angle (PA) and a diametral pitch (DP) of 4 transmits torque between parallel shafts to provide rotational power to another part of a motorized system. It has a 14.5-degree pressure angle for a higher contact ratio between gears than larger pressure angles, resulting in quieter operation, and a 4-diametral pitch for applications where transferring torque is more important than having precise control over motion, such as starting, stopping, and changing speed or rotational direction. This spur gear, which can mesh only with spur gears that have the same pressure angle and diametral pitch, is made of high carbon steel for tensile strength and hardness. This Martin spur gear is suitable for use in a variety of commercial and industrial applications, such as construction equipment, aeronautics, conveyors, and manufacturing equipment, among others.Spur gears, the most common gear type, have a circular or cylindrical shape with teeth bordering the outer perimeter and are used for transmitting rotational torque and motion between parallel rotating shafts. A spur gear's pressure angle (PA), diametral pitch (also called DP or pitch), and its material are important factors to consider when purchasing. Gears come in several types fo...

  • Brand: Martin
  • ASIN: B004BDNY64
  • UPC: 697950053783

Traxxas 34-T Pinion Gear (1.0 metric pitch) and 20 Degree Pressure Angle (fits 5mm shaft)

Traxxas 34-T Pinion Gear (1.0 metric pitch) and

Gear, 34-T pinion (1.0 metric pitch, 20° pressure angle) / set screw. Optional Traxxas pinion gears allow you to increase or decrease the final drive ratio and tune for different applications. Larger gears will result in higher speeds while smaller gears provide more torque. These are designed for use with 1.0 metric pitch spur gears and 5mm motor shafts.

  • Brand: Traxxas
  • UPC: 020334649300

Boston Gear L5126 Rack Gear, 14.5 Degree Pressure Angle, 16 Pitch, 6.0 feet Long, Steel

Boston Gear L5126 Rack Gear, 14.5 Degree Pressure

RACK GEAR, 14 1/2 PA, 16 DP, STEEL,

  • Brand: Boston Gear
  • ASIN: B000LDIQB6
  • UPC: 781711127483

Effect of Pressure Angle & Backup Ratio on Asymmetric Spur Gear Tooth: Using ANSYS

Effect of Pressure Angle & Backup Ratio on

Thin rim gears find application in high-power, lightweight aircraft transmissions. Rim thickness and pressure angle are the significant design parameter for these gears. The rim thickness factor is used in the situations in which a gear is made with a rim and spokes rather than a solid disc. Under these circumstances, failure can occur across the rim rather than through the tooth root.An asymmetric spur gear drive means that larger and smaller pressure angles are applied for the driving and coast sides. The two profiles of a gear tooth are functionally different for most gear drives. The main objective of this paper is to estimate the critical section for different pressure angles and backup ratios and compare the results obtained by other researchers. Developed programme is used to create a finite element model for symmetric and asymmetric spur gear tooth to study the effect of bending stress at the critical section for different backup ratios and pressure angle. To study the effect of above parameter ANSYS is used .The rim thickness was varied and the location and magnitude of the maximum bending stresses were reported and results obtained were compared.

  • ASIN: 6139460131

DEWALT DWARA100 Right Angle Attachment

DEWALT DWARA100 Right Angle

This right-angle attachment for DEWALT(R) impact drivers allows you to reach into tight places for easier driving. The sure set system floating magnet secures fasteners for you - no more trying to hold screws in sweaty fingers . In comparison the DWARA50 features up to 2X longer life and no magnet, while the DWARA100 has up to 5X long life and a magnet and the dimensions from tip to back on the DEWALT DWARA100 measures one inch giving users a tool to fit into even some of the smallest spaces

  • Color: Yellow/Silver Right Angle Attachment
  • Brand: DEWALT
  • UPC: 798256183348

Traxxas 6449X 54-T Steel 1.0 Metric Pitch 20° Pressure Angle Spur Gear

Traxxas 6449X 54-T Steel 1.0 Metric Pitch 20°

Steel spur gear, 54-tooth (1.0 metric Pitch, 20° pressure angle) delivers the ultimate in durability and heat resistance for the x-maxx use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. This product is made from high quality materials and designed for long-lasting performance. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings.

  • Brand: Traxxas
  • UPC: 020334644992

Boston Gear GB24 Plain Change Gear, 14.5 Degree Pressure Angle, 16 Pitch, 0.750" Bore, 24 Teeth, Steel

Boston Gear GB24 Plain Change Gear, 14.5 Degree


  • Brand: Boston Gear
  • ASIN: B004N62SF2
  • UPC: 781711101087

Camco 25ft RhinoFLEX Gray/Black Water Tank Clean Out Hose - Ideal For Flushing Black Water, Grey Water or Tote Tanks 5/8" Inside Diameter (Orange) (22990)

Camco 25ft RhinoFLEX Gray/Black Water Tank Clean Out

If you are flushing your black and grey water tanks or cleaning out a tote tank, then you have to use a separate hose so that you don’t risk cross-contamination with a drinking water hose. The Camco RhinoFLEX 25’ Grey Water Hose is made of durable PVC and is bright orange so that you don’t mix it up with your drinking water hoses by accident. The ends are compatible with standard garden hose threads.

  • Color: Orange
  • Brand: Camco
  • UPC: 014717229906

Pet Gear Travel Lite Ramp with supertraX Surface for Maximum Traction, 4 Models to Choose from, 42-71 in. Long, Supports 150-200 lbs, Find The Best Fit for Your Pet

Pet Gear Travel Lite Ramp with supertraX Surface

The Pet Gear Tri-Fold Pet Ramp with supertraX allows your pet easy access into your vehicle or other hard to reach places with a better grip than ever before. The removable supertraX mat is pressure activated, meaning your pet will easily be able to grip into the mat, simply by putting weight on it. The supertraX mat is much preferred to other types of carpet treads because it allows your pet’s paws to have a greater surface area contact with the ramp, creating greater stability. The mat is also removable for easy cleaning. Bottom grippers and included safety tether help the ramp maintain in a steady position. The ramp has a built-in carry handle for easy transportation and a patented Tri-Fold design which reduces storage space.

  • Color: Black/Green
  • Brand: Pet Gear
  • UPC: 810684010222
Similar Pressure Angle Gears Shopping Results