Assault Racing Products ARA3501638SA Small Block Chevy Polylock Aluminum Rocker Arms 1.6 Ratio 3/8 Stud Self Align SBC

Assault Racing Products ARA3501638SA Small Block Chevy Polylock

Maximum Race Series Aluminum Rockers Chevy Small Block Self-Aligning, 1.60 ratio, 3/8" stud (23 degree stock/aftermarket heads) Made from high strength 6061-T6 aluminum extrusions, each piece is precision CNC machined and finished by hand to ensure that our customers receive the very best KMJ has to offer. Assault Racing stud mount aluminum rockers are specially machined to allow for larger springs and retainers with full-cage friction reducing needle bearings for added durability. The nose rollers and shafts are Cr40 steel, heat-treated and hardened to minimize the wear that naturally occurs between the roller tip and the valve stem. As with other Assault Racing products, these are in-stock for immediate delivery. All Assault Racing aluminum rockers come complete with poly locks at no additional cost. Designed to meet the demands of most high-lift roller camshaft profiles Specially machined to accommodate larger valve springs and retainers SAE-52100 Full complement precision needle and cage roller bearings Anodized for a superior finish and to reduce operating temperatures CNC machined pushrod cups and heat-treated Cr40 roller tips Internal oiling system for long lasting performance Self-Aligning Design Clears most centerbolt covers (depending on the inside of the cover). Applic...

  • Color: 1.6
  • Brand: Assault Racing Products
  • ASIN: B01BPPBG2O

Competition Cams 1417-16 Magnum Self-Aligning Roller 1.52 ratio, 3/8" Stud Diameter Rocker Arm for Small Block Chevy

Competition Cams 1417-16 Magnum Self-Aligning Roller 1.52 ratio,

These Magnum Roller Rocker Arms for Chevy V8 1988-up 305 and 350c.i. applications with center bolt valve covers are the ultimate street rocker. With a 3/8 inch stud diameter and 1.52 ratio, they are designed for serious performance enthusiasts. All Magnum Roller Rocker Arms are constructed from 8620 chromemoly steel, which is a superior material that will not flex and assures maximum lift. Their roller tip reduces friction, while stiff design and superior ratio accuracy yield more effective valve lift. With a 15 to 30 horsepower increase over other rocker arms, Magnum Roller Rockers are perfect for performance applications with less than 350 pounds. open spring pressure. Don't accept inferior products or cheap knock-offs, look for the COMP Cams logo stamped into the underside of every Magnum Rocker.

  • Brand: Comp Cams
  • ASIN: B00062Z8MM
  • UPC: 036584023890

Competition Cams 17001-16 High Energy Die Cast Aluminum Roller 1.5 Ratio, 3/8" Stud Diameter Rocker Arm for Small Block Chevrolet

Competition Cams 17001-16 High Energy Die Cast Aluminum

These High Energy Die Cast Aluminum Roller Rocker Arms for Chevy V8 265-400 applications are perfect for street and moderate race use. With a 3/8" stud diameter and 1.5 ratio, the die cast, larger-than-stock body of the rocker arms is made of aluminum for superior strength with light overall weight. High Energy Die Cast Aluminum Roller Rocker Arms from COMP Cams are an affordable option that feature a die cast, aluminum body with a needle bearing fulcrum and roller tip. Designed to be stiffer and more durable, these cost effective rocker arms are capable of providing added valve lift while withstanding the rigors of a performance application. Their specially engineered fulcrum and roller tip create far less friction than sliding factory models to lower oil temperatures, thus improving both response and horsepower. Snap rings are used to hold the trunion and bearings locked in place..

  • Brand: Comp Cams
  • ASIN: B003V63FCU
  • UPC: 036584215929

1.5 7/16 inch SBC Aluminum Roller Rocker ARMS for CHEVY SB V8

1.5 7/16 inch SBC Aluminum Roller Rocker ARMS

Aluminum ROLLER ROCKER ARMS kit for Chevy SB V81.5" 7/16, 16 CNC Billet Aluminum Arms , For the SBC 283, 327, 350, 383 & 400

  • Brand: CXRacing
  • ASIN: B00FIWJX3A
  • UPC: 760921524770

Elgin SSR-840RS Stainless Steel Roller Rocker Arm (Set of 16), 16 Pack

Elgin SSR-840RS Stainless Steel Roller Rocker Arm (Set

Elgin Pro stock high performance stainless steel roller rocker arms for Chevy small block. 1.5: 1 ratio with 3/8" stud diameter. Set of 16 rocker arms and poly locks.

  • Brand: Elgin
  • ASIN: B00CB3ITJS
  • UPC: 013122333642

Elgin SSR-1840RS Stainless Steel Roller Rocker Arm (Set of 16), 16 Pack

Elgin SSR-1840RS Stainless Steel Roller Rocker Arm (Set

Elgin Pro stock high performance stainless steel roller rocker arms for Chevy small block. 1.5: 1 ratio with 7/16" stud diameter. Set of 16 rocker arms and poly locks.

  • Brand: Elgin
  • ASIN: B00CB3IQZ0
  • UPC: 013122333680

Elgin SSR-868RS Stainless Steel Roller Rocker Arm (Set of 16), 16 Pack

Elgin SSR-868RS Stainless Steel Roller Rocker Arm (Set

Elgin Pro stock high performance stainless steel roller rocker arms for Chevy Big block. 1.72: 1 ratio with 7/16" stud diameter. Set of 16 rocker arms and poly locks.

  • Brand: Elgin
  • ASIN: B00CB3IUQK
  • UPC: 013122333727

Assault Racing Products 3501538 Small Block Chevy Roller Tip Rocker Arms 1.5 Ratio 3/8 Polylocks SBC 305 350 400

Assault Racing Products 3501538 Small Block Chevy Roller

Assault Racing Sportsman Series steel stud mount roller tip rocker arms are the ideal choice for a large cross section of engines; whether it is a mild street rebuild or the performance requirements of off-road, circle track, drag racing, or marine applications. The 4340 chromoly steel rocker bodies feature a longer pivot slot for higher lift camshafts and are much stronger than die-cast aluminum or stamped steel, minimizing rocker arm flex. The roller tip minimizes scrubbing (the result of the valve stem pushing hard against the valve guide), reducing friction and freeing up additional horsepower over stock rockers. Features Polylocks included, a superior solution to lock nuts 4340 steel rocker bodies and heat-treated pivot balls Features an elongated pivot slot for higher lift camshafts Reduces friction, leading to additional horsepower Rated at 350lbs open spring pressure Stronger than die cast aluminum or stamped steel rocker bodies.

  • Brand: Assault Racing Products
  • ASIN: B00S75G1QW

For Chevy SBC 350 1.5 Ratio 3/8" Stainless Steel Stud Mount Roller Rocker Arm Set

For Chevy SBC 350 1.5 Ratio 3/8" Stainless

Application: --Compatible with most SBC small block Chevy engines ,such as SBC 267, 283, 302, 305, 307, 327, 350, 383, & 400 V8 engines Description: --Stainless Steel ROLLER ROCKER ARMS Kit For Chevy SB V8 1.5" 3/8, 16 CNC Stainless Steel Arms With Polylock Nuts --Creates less friction, allows more accurate valve adjustment and has extreme rigidity --Lightweight with integral push rod seat --Not self aligning --Fit most SBC small block Chevy --Full roller rocker Package: --16 stud mounted stainless steel roller rocker arms with 16 poly locks (what you see in the picture is what you'll get) --Professional Installation is Highly Recommended (No Instruction Included)

  • Brand: DEMOTOR
  • ASIN: B00VLEYCNU

Assault Racing Products SRA3501538 Small Block Chevy Polylock Stainless Steel Rocker Arms 1.5 Ratio 3/8 Stud SBC

Assault Racing Products SRA3501538 Small Block Chevy Polylock

Maximum Race Series Stainless Steel Rockers Chevy Small Block 1.50 Ratio, 3/8" Stud Made from high strength 15-5PH stainless steel, each piece is precision CNC machined and finished by hand to ensure that our customers receive the very best KMJ has to offer. ARC stud mount steel rockers are specially machined to allow for larger springs and retainers with full-cage friction reducing needle bearings for added durability. The nose rollers and shafts are Cr40 steel, heat-treated and hardened to minimize the wear that naturally occurs between the roller tip and the valve stem. All ARC stainless steel rockers come complete with poly locks at no additional cost. Designed to meet the demands of most high-lift roller camshaft profiles Specially machined to accommodate larger valve springs and retainers SAE-52100 Full complement precision needle and cage roller bearings CNC machined pushrod cups and heat-treated Cr40 roller tips Internal oiling system for long lasting performance Clears most centerbolt covers (depending on the inside of the cover). Applications: 262 (1975-76) 265 (1955-57) 267 (1979-82) 283 (1957-67) 302 (1967-68) 305 (1976-86) 307 (1968-73) 327 (1962-69) 350 (1967-86) 400 (1970-80)

  • Color: 1.5
  • Brand: Assault Racing Products
  • ASIN: B01BPPBDTU

Assault Racing Products ARA45417716 Big Block Chevy Polylock Aluminum Rocker Arms 1.7 Ratio 7/16 Stud BBC

Assault Racing Products ARA45417716 Big Block Chevy Polylock

Maximum Race Series Aluminum Rockers Chevy Big Block 1.70 ratio, 7/16" stud Made from high strength 6061-T6 aluminum extrusions, each piece is precision CNC machined and finished by hand to ensure that our customers receive the very best KMJ has to offer. Assault Racing stud mount aluminum rockers are specially machined to allow for larger springs and retainers with full-cage friction reducing needle bearings for added durability. The nose rollers and shafts are Cr40 steel, heat-treated and hardened to minimize the wear that naturally occurs between the roller tip and the valve stem. As with other Assault Racing products, these are in-stock for immediate delivery. All Assault Racing aluminum rockers come complete with poly locks at no additional cost. Designed to meet the demands of most high-lift roller camshaft profiles Specially machined to accommodate larger valve springs and retainers SAE-52100 Full complement precision needle and cage roller bearings Anodized for a superior finish and to reduce operating temperatures CNC machined pushrod cups and heat-treated Cr40 roller tips Internal oiling system for long lasting performance Clears most centerbolt covers (depending on the inside of the cover). Applications: 396 (1966-70) 402 (1970-72) 427 (1966-69) 454 (1970-90)

  • Brand: Assault Racing Products
  • ASIN: B01BPPBBI8

1.5 3/8 inch Stainless Steel ROLLER ROCKER ARMS kit for Chevy SB V8

1.5 3/8 inch Stainless Steel ROLLER ROCKER ARMS

Stainless Steel ROLLER ROCKER ARMS kit for Chevy SB V81.5" 3/8, 16 CNC Stainless Steel Arms , For the SBC 283, 327, 350, 383 & 400

  • Brand: CXRacing
  • ASIN: B00FIXKCQ6
  • UPC: 760921524800

Elgin SSR-2889RS Stainless Steel Roller Rocker Arm (Set of 16), 16 Pack

Elgin SSR-2889RS Stainless Steel Roller Rocker Arm (Set

Elgin Pro stock high performance stainless steel roller rocker arms for Ford small block. 1.6: 1 ratio with 3/8" stud diameter. Set of 16 rocker arms and poly locks.

  • Brand: Elgin
  • ASIN: B00CB3ISNU
  • UPC: 013122333765

Proform 66907 Extruded Aluminum Roller-Rocker Arm, 1.5 Ratio, 3/8" Stud

Proform 66907 Extruded Aluminum Roller-Rocker Arm, 1.5 Ratio,

Proform extruded aluminum roller-rocker arm has a 1.5 ratio, 3/8" stud and fits select Chevy small block engines. Reduces internal valve train friction and valve stem wear. Full needle bearing, fulcrum and roller tip unleash horsepower. 16 extruded aluminum roller rockers and 16 poly locks.

  • Brand: ProForm
  • ASIN: B000CC9DGI
  • UPC: 037995369072

Competition Cams 1416-16 Magnum Roller 1.6 ratio, 3/8" Stud Diameter Rocker Arm for Small Block Chevy

Competition Cams 1416-16 Magnum Roller 1.6 ratio, 3/8"

These Magnum Roller Rocker Arms for Chevy V8 265-400 and V6 200-262 applications are the ultimate street rocker. With a 3/8 inch stud diameter and 1.6 ratio, they are designed for serious performance enthusiasts. All Magnum Roller Rocker Arms are constructed from 8620 chromemoly steel, which is a superior material that will not flex and assures maximum lift. Their roller tip reduces friction, while stiff design and superior ratio accuracy yield more effective valve lift. With a 15 to 30 horsepower increase over other rocker arms, Magnum Roller Rockers are perfect for performance applications with less than 350 pounds. open spring pressure. Don't accept inferior products or cheap knock-offs, look for the COMP Cams logo stamped into the underside of every Magnum Rocker.

  • Brand: Comp Cams
  • ASIN: B00062YSIC
  • UPC: 036584310389

PRW 0835005 1.6 x 3/8" Sportsman Steel Roller Tip Self-Aligning Rocker Arm for Chevy 262-400 1987-00 Vortec

PRW 0835005 1.6 x 3/8" Sportsman Steel Roller

PRW sportsman steel roller tip rockers are the ideal choice for a large cross-section of engines; whether it is a mild street rebuild or the performance requirements of off-track, circle track, and drag racing. The PRW 4340 chromoly steel rocker bodies feature a longer pivot slot for higher lift camshafts and are much stronger than die cast aluminum or stamped steel, so rocker arm flex is negligible. The roller tip minimizes scrubbing (the result of the valve stem pushing hard against the valve guide), reducing friction and freeing up an additional 15 to 30 horsepower over stock rockers.

  • Brand: PRW
  • ASIN: B004BTELQ0
  • UPC: 842864000723

Chevy SBC Roller Rocker Arm 1.6 Ratio Chrome-Moly Steel 3/8" Stud Dia.

Chevy SBC Roller Rocker Arm 1.6 Ratio Chrome-Moly

CHROME-MOLY STEEL ROLLER ROCKER ARMS • Made from high grade chrome-moly steel, lighter and three times stronger than aluminum rocker arms • Trunion, valve tip roller and shaft made from chrome-moly material, heat treated to insure long life • Integral push rod seat • Design allows clearance for most high performance valve springs • Extra large trunions for better load distribution and wear • Maximum open spring pressure 800 lbs. • Laser etched with Engine Pro logo

  • Brand: Engine Pro
  • ASIN: B06XD4816V
  • UPC: 707473922494

COMP Cams 1412-8 Magnum Roller Rocker Arm with 1.52 Ratio and 3/8" Stud Diameter for Chevy Small Block Engine, (Set of 8)

COMP Cams 1412-8 Magnum Roller Rocker Arm with

These Magnum Roller Rocker Arms for Small Block Chevy 265-400 applications are the ultimate street rocker. With a 3/8 inch stud diameter and 1.52 ratio, they are designed for serious performance enthusiasts. All Magnum Roller Rocker Arms are constructed from 8620 chromemoly steel, which is a superior material that will not flex and assures maximum lift. Their roller tip reduces friction, while stiff design and superior ratio accuracy yield more effective valve lift. With a 15 to 30 horsepower increase over other rocker arms, Magnum Roller Rockers are perfect for performance applications with less than 350 lbs. open spring pressure. Don't accept inferior products or cheap knock-offs, look for the COMP Cams logo stamped into the underside of every Magnum Rocker.

  • Brand: Comp Cams
  • ASIN: B000P5G73O
  • UPC: 036584310181

Elgin SSR-840SPRS Stainless Steel Roller Rocker Arm (Set of 16), 16 Pack

Elgin SSR-840SPRS Stainless Steel Roller Rocker Arm (Set

Elgin Pro stock high performance stainless steel roller rocker arms for Chevy small block. 1.6: 1 ratio with 3/8" stud diameter. Set of 16 rocker arms and poly locks.

  • Brand: Elgin
  • ASIN: B00CB3IU56
  • UPC: 013122333666

Elgin SSR-848RS Stainless Steel Roller Rocker Arm (Set of 16), 16 Pack

Elgin SSR-848RS Stainless Steel Roller Rocker Arm (Set

Elgin Pro Stock High Performance Stainless Steel Roller Rocker Arms for Pontiac 265-455. 1.65:1 Ratio with 7/16" Stud Diameter. Set of 16 Rocker Arms and Poly Locks.

  • Brand: Elgin
  • ASIN: B071XY4KB1
  • UPC: 013122366763

Aluminum Roller Rocker Arms SBC for Chevy 1.5" 3/8 SB 283 327 350 383 400

Aluminum Roller Rocker Arms SBC for Chevy 1.5"

1.5" 3/8 Aluminum ROLLER ROCKER ARMS kit for Chevy SB V8.CNC Billet Aluminum Arms, For the SBC 283, 327, 350, 383 & 400.One Set of 16 pcs.

  • Brand: CXRacing
  • ASIN: B00FIXZU2M
  • UPC: 760921524879

Competition Cams 1601-16 Ultra Pro Magnum 1.52 Ratio, 3/8" Stud Diameter, Roller Rocker Arm for Small Block Chevrolet

Competition Cams 1601-16 Ultra Pro Magnum 1.52 Ratio,

The Ultra Pro Magnum Roller Rocker Arms for Chevy V8 265-400 applications not only live up to the lofty standards of the original Pro Magnums, but they also take stud mount rocker performance, stability and value to a whole new level. These rocker arms feature a 3/8" stud diameter and 1.52 ratio. The 8650 chromemoly material and arched, web-like design deliver increased strength and rigidity while still reducing the moment of inertia and optimizing the dynamic balance. A unique black oxide exterior finish helps prevent corrosion and increases durability. Featuring oversized trunions, precision-sorted needle bearings and hardened roller tips for the ultimate in performance and dependability. Optimized retainer and valve spring clearances allow for use of most diameter springs, retainers and +.050" locks without clearance or fitment issues.

  • Brand: Comp Cams
  • ASIN: B003HGQQJ8
  • UPC: 036584195771

Chevy BBC Roller Rocker Arm 1.72 Ratio Chrome-Moly Steel 7/16" Stud 07-1114-16

Chevy BBC Roller Rocker Arm 1.72 Ratio Chrome-Moly

ENGINE PRO CHROME-MOLY STEEL ROLLER ROCKER ARMS are made from high grade chrome-moly steel, lighter and three times stronger than aluminum rocker arms. Trunion, valve tip roller, and shaft, are made from chrome-moly material and heat treated to insure long life. Integral push rod seat. Design allows clearance for most high performance valve springs. Extra large trunions for better load distribution and wear. Maximum open spring pressure 800 lbs. Laser etched with Engine Pro logo

  • Brand: Engine Pro
  • ASIN: B07N36YTM4
  • UPC: 846163072948

Mopar fits Chrysler BB 383 440 1.6 Aluminum Roller Rocker Arms & Shafts (Ofset .650)

Mopar fits Chrysler BB 383 440 1.6 Aluminum

Mopar Chrysler BB 383 440 1.6 Aluminum Roller Rocker Arms & Shafts (Ofset .650)Brand: Procomp Electronics Part Number: PCE261.1174 Part Type: Rocker Arms Rocker Arm Mounting Style: Shaft Rocker Arm Ratio: 1.6Rocker Arm Style: Full roller (.630 OFFSET) Shaft Diameter (in): 0.875 in. Shims Included: Yes Self-Aligning: NoRocker Arm Body Style: Offset IntakeRocker Arm Material: Aluminum Rocker Arm Finish: Red anodized Quantity: Sold as a kit.

  • Brand: Procomp Electronics
  • ASIN: B01L0YR5RU

Proform 66878 Extruded Aluminum Roller-Rocker Arm

Proform 66878 Extruded Aluminum Roller-Rocker

Proform 66878 Extruded Alum Pedestal Mnt Roller-Rkrs. Ford 1.7 Ratio,5/16 Std,302ho 351w.

  • Color: Regular
  • Brand: ProForm
  • ASIN: B000630IGW
  • UPC: 037995368785

ENGINE PRO SBC CHEVY CHROME-MOLY STEEL ROLLER ROCKER ARMS 1.6 RATIO 7/16" STUD

ENGINE PRO SBC CHEVY CHROME-MOLY STEEL ROLLER ROCKER

CHROME-MOLY STEEL ROLLER ROCKER ARMS • Made from high grade chrome-moly steel, lighter and three times stronger than aluminum rocker arms • Trunion, valve tip roller and shaft made from chrome-moly material, heat treated to insure long life • Integral push rod seat • Design allows clearance for most high performance valve springs • Extra large trunions for better load distribution and wear • Maximum open spring pressure 800 lbs. • Laser etched with Engine Pro logo

  • Brand: Engine Pro
  • ASIN: B06XCQXV5N
  • UPC: 707473082747

Michigan Motorsports Rocker Arm Fitment for Mopar Dodge Jeep Chrysler V8 4.7L 3.7L replaces 3.7 4.7 53020742AC

Michigan Motorsports Rocker Arm Fitment for Mopar Dodge

Fits the following years and models: 2007-09 Chrysler Aspen Rocker Arm 16 Piece Set for V8 4.7L Mopar 53020742AC 2000-10 Dodge Dakota Rocker Arm 16 Piece Set for V8 4.7L Mopar 53020742AC 2000-09 Dodge Durango Rocker Arm 16 Piece Set for V8 4.7L Mopar 53020742AC 2002-10 Dodge Ram 1500 Truck Rocker Arm 16 Piece Set for V8 4.7L Mopar 53020742AC 2006-09 Jeep Commander (XK) Rocker Arm 16 Piece Set for V8 4.7L Mopar 53020742AC 2000-09 Jeep Grand Cherokee Rocker Arm 16 Piece Set for V8 4.7L Mopar 53020742AC 2006-07 Mitsubishi Raider Rocker Arm 16 Piece Set for V8 4.7L Mopar 53020742AC 2011-13 Ram 1500 Truck Rocker Arm 16 Piece Set for V8 4.7L Mopar 53020742AC 2011 Ram Dakota Rocker Arm 16 Piece Set for V8 4.7L Mopar 53020742AC

  • Brand: Michigan Motorsports
  • ASIN: B06Y2P4V9Z

COMP Cams 17005-16 High Energy 7/16" Stud Diameter Die Cast Aluminum Roller Rocker Arm for Small Block Chevrolet

COMP Cams 17005-16 High Energy 7/16" Stud Diameter

These High Energy die cast aluminum roller rocker arms for Chevy V8 265-400 applications are perfect for street and moderate race use. With a 7/16 inches stud diameter and 1.6 ratio, the die cast, larger-than-stock body of the rocker arms is made of aluminum for superior strength with light overall weight. High Energy die cast aluminum roller rocker arms from COMP Cams are an affordable option that feature a die cast, aluminum body with a needle bearing fulcrum and roller tip. Designed to be stiffer and more durable, these cost effective rocker arms are capable of providing added value lift while withstanding the rigors of a performance application. Their specially engineered fulcrum and roller tip create far less friction than sliding factory models to lower oil temperatures, thus improving both response and horsepower. Snap rings are used to hold the trunion and bearings locked in place.

  • Brand: Comp Cams
  • ASIN: B003U8GO4K
  • UPC: 036584215967

Chevy SBC Roller Rocker Arm 1.5 Ratio Chrome-Moly Steel 7/16" Stud 07-1101-16

Chevy SBC Roller Rocker Arm 1.5 Ratio Chrome-Moly

ENGINE PRO CHROME-MOLY STEEL ROLLER ROCKER ARMS are made from high grade chrome-moly steel, lighter and three times stronger than aluminum rocker arms. Trunion, valve tip roller, and shaft, are made from chrome-moly material and heat treated to insure long life. Integral push rod seat. Design allows clearance for most high performance valve springs. Extra large trunions for better load distribution and wear. Maximum open spring pressure 800 lbs. Laser etched with Engine Pro logo

  • Brand: Engine Pro
  • ASIN: B07N37CVRG
  • UPC: 846163072917

COMP Cams 19005-8 Ultra-Gold Aluminum Roller Rocker Arm with 1.6 Ratio and 7/16" Stud Diameter for Small Block Chevrolet, (Set of 8)

COMP Cams 19005-8 Ultra-Gold Aluminum Roller Rocker Arm

These COMP Cams Ultra-Gold Aluminum Roller Rocker Arms with a 7/16 inch stud diameter and 1.6 ratio are designed for Chevrolet V8 265-400 applications. The new modern design features of these Ultra-Gold Rockers are proven to withstand extremely aggressive spring pressure and valve lift. Designed specifically for high performance street and race engines, the Ultra-Gold Aluminum Rocker Arms are precision CNC-machined to strict tolerances. Developed to meet the demands of professional engine builders, these rockers include features never before possible in an aluminum rocker arm.

  • Brand: Comp Cams
  • ASIN: B001GBK97Q
  • UPC: 036584176824

Assault Racing Products 3501538SA Small Block Chevy Vortec Chevy Roller Tip Rockers 1.5 Ratio 3/8 Stud with Polylocks Self Aligning SBC 350

Assault Racing Products 3501538SA Small Block Chevy Vortec

Assault Racing Sportsman Series Steel Roller Tip Rocker Arms Small Block Chevy 1.5 Ratio for 3/8 Studs Self-Aligning Engine Applications Model Chevrolet 262-400 TBI Vortec. Our Assault Racing Sportsman Series steel stud mount roller tip rocker arms are the ideal choice for a large cross section of engines; whether it is a mild street rebuild or the performance requirements of off-road circle track drag racing or marine applications. The 4340 chromoly steel rocker bodies feature a longer pivot slot for higher lift camshafts and are much stronger than die-cast aluminum or stamped steel minimizing rocker arm flex The roller tip minimizes scrubbing the result of the valve stem pushing hard against the valve guide reducing friction and freeing up additional horsepower over stock rockers Benefits Characteristics Polylocks included a superior solution to lock nuts 4340 steel rocker bodies and heat-treated pivot balls. Features an elongated pivot slot for higher lift camshafts Reduces friction leading to additional horsepower Rated at 350lbs open spring pressure Stronger than die cast aluminum or stamped steel rocker bodies.

  • Brand: Assault Racing Products
  • ASIN: B00S75G8J2

Competition Cams 17043-16 High Energy Die Cast Aluminum Roller 1.6 Ratio, 3/8" Stud Diameter Rocker Arm for Small Block Ford

Competition Cams 17043-16 High Energy Die Cast Aluminum

The COMP Cams High Energy Die-Cast Aluminum Roller Rocker Arms are new rocker arms from the valve train leader that have been designed for street and moderate race use. They feature a die-cast body created from aluminum with a needle bearing fulcrum and roller tip. The die-cast, larger than stock body offers the strength properties and light weight of aluminum while the specially engineered fulcrum and roller tip decrease friction and lower oil temperatures, thus improving response and horsepower.

  • Brand: Comp Cams
  • ASIN: B003YLKJYE
  • UPC: 036584221074

Competition Cams 1411-16 Magnum Roller 1.72 ratio, 7/16" Stud Diameter Rocker Arm for Big Block Chevy, Boss 302, 351 Cleveland and 429, 460 Ford

Competition Cams 1411-16 Magnum Roller 1.72 ratio, 7/16"

These Magnum Roller Rocker Arms for Chevy V8 396-454; Ford Boss 302, 351C-400M; and Ford V8 429-460 applications are the ultimate street rocker. With a 7/16 inch stud diameter and 1.72 ratio, they are designed for serious performance enthusiasts. All Magnum Roller Rocker Arms are constructed from 8620 chromemoly steel, which is a superior material that will not flex and assures maximum lift. Their roller tip reduces friction, while stiff design and superior ratio accuracy yield more effective valve lift. With a 15 to 30 horsepower increase over other rocker arms, Magnum Roller Rockers are perfect for performance applications with less than 350 pounds. open spring pressure. Don't accept inferior products or cheap knock-offs, look for the COMP Cams logo stamped into the underside of every Magnum Rocker.

  • Brand: Comp Cams
  • ASIN: B000CIQ7RK
  • UPC: 036584310990

New Rocker Arm Set compatible with 1955-1986 Chevy sb 400 350 327 307 305 302 283 267 265 262 (Rockers, Nuts and Balls)

New Rocker Arm Set compatible with 1955-1986 Chevy

This listing is for a brand new set of stock style Stamped Steel rocker arms that are made in the USA by Elgin Industries.These are compatible with 1955-1986 Chevy sb 400 350 327 307 305 302 283 267 265 262 V-8's. Set comes with 16 rockers, balls and nuts. Ratio: Stock 1.5 Stud Size: Stock 3/8".

  • Brand: Falcon Performance
  • ASIN: B01M4GIUX0

Competition Cams 1431-16 Magnum Roller 1.6 ratio, 3/8" Stud Diameter Rocker Arm for Small Block Ford (Rail Type)

Competition Cams 1431-16 Magnum Roller 1.6 ratio, 3/8"

These Magnum Roller Rocker Arms for Ford V8 289-351W (Rail Type) 1968-89 applications are the ultimate street rocker. With a 3/8 inch stud diameter and 1.6 ratio, they are designed for serious performance enthusiasts. All Magnum Roller Rocker Arms are constructed from 8620 chromemoly steel, which is a superior material that will not flex and assures maximum lift. Their roller tip reduces friction, while stiff design and superior ratio accuracy yield more effective valve lift. With a 15 to 30 horsepower increase over other rocker arms, Magnum Roller Rockers are perfect for performance applications with less than 350 pounds. open spring pressure. Don't accept inferior products or cheap knock-offs, look for the COMP Cams logo stamped into the underside of every Magnum Rocker.

  • Brand: Comp Cams
  • ASIN: B00062YZSU
  • UPC: 036584310624

Chevy SBC 350 1.5 Ratio 3/8" Self Aligning Steel Roller Tip Rocker Arm Set

Chevy SBC 350 1.5 Ratio 3/8" Self Aligning

Chevy SBC 350 1.5 Ratio 3/8" Self Aligning Steel Roller Tip Rocker Arm SetBrand: Procomp Electronics Part Number: PCE261.1043 Part Type: Rocker Arms Rocker Arm Mounting Style: Stud Rocker Arm Ratio: 1.5Rocker Arm Style: Roller tip Stud Size: 3/8 in. Shims Included: No Self-Aligning: YesRocker Arm Body Style: Standard Rocker Arm Nut Style: Self-locking Rocker Arm Material: Steel Rocker Arm Finish: Natural Quantity: Sold as a set of 16.

  • Brand: Procomp Electronics
  • ASIN: B01M104C3M

PRW 0835002 1.5 x 3/8" Sportsman Steel Roller Tip Self-Aligning Rocker Arm for Chevy 262-400 1987-00 Vortec

PRW 0835002 1.5 x 3/8" Sportsman Steel Roller

PRW sportsman steel roller tip rockers are the ideal choice for a large cross-section of engines; whether it is a mild street rebuild or the performance requirements of off-track, circle track, and drag racing. The PRW 4340 chromoly steel rocker bodies feature a longer pivot slot for higher lift camshafts and are much stronger than die cast aluminum or stamped steel, so rocker arm flex is negligible. The roller tip minimizes scrubbing (the result of the valve stem pushing hard against the valve guide), reducing friction and freeing up an additional 15 to 30 horsepower over stock rockers.

  • Brand: PRW
  • ASIN: B004BTB4EC
  • UPC: 842864000693

Michigan Motorsports LS1 Rocker Arms and Bolts with Trunion Kit Installed - FITS LS2 LS6 LQ4 LQ9 LY5 LY6 LM7 4.8 5.3 5.7 6.0

Michigan Motorsports LS1 Rocker Arms and Bolts with

Replacing your rockers with a true roller bearing setup is highly recommended whether you have a stock LS motor or a highly modified LS motor The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo and are the same rockers we utilize on our 1,000 hp Turbo Motor. We utilize LS1 rocker arms and install new LS1 rocker arm retro-fit trunion kit that replaces the cageless, loose OEM needle bearings and powdered metal trunion with a premium 8620 steel alloy trunnion and caged roller bearings for added durability. The trunion kit's caged roller bearings that greatly reduce the possibility of the bearing failure experienced with stock LS1 needle bearings, which can send loose needles throughout the engine upon failure. Fits all these applications: LS1/LS2/LS6/ LR4 Vortec 5300 LM7 L59 LM4 L33 - 4.8/5.3/5.7/6.0/ Engines This kit includes: 16 LS1 Rocker Arms 16 rocker arm trunnions- LS-type retrofit 32 rocker arm bearings- LS-type retrofit 32 rocker arm retaining rings- LS-type retrofit 16 bolts for LS trunnion kit.

  • Brand: Michigan Motorsports
  • ASIN: B01JDIQRQK

Competition Cams 1412-16 Magnum Roller 1.52 ratio, 3/8" Stud Diameter Rocker Arm for Small Block Chevy

Competition Cams 1412-16 Magnum Roller 1.52 ratio, 3/8"

These Magnum Roller Rocker Arms for Chevy V8 265-400 and V6 200-262 applications are the ultimate street rocker. With a 3/8 inch stud diameter and 1.52 ratio, they are designed for serious performance enthusiasts. All Magnum Roller Rocker Arms are constructed from 8620 chromemoly steel, which is a superior material that will not flex and assures maximum lift. Their roller tip reduces friction, while stiff design and superior ratio accuracy yield more effective valve lift. With a 15 to 30 horsepower increase over other rocker arms, Magnum Roller Rockers are perfect for performance applications with less than 350 pounds. open spring pressure. Don't accept inferior products or cheap knock-offs, look for the COMP Cams logo stamped into the underside of every Magnum Rocker.

  • Brand: Comp Cams
  • ASIN: B00062ZHH8
  • UPC: 036584310174

Competition Cams 1620-16 Ultra Pro Magnum Roller 1.7 Ratio, 7/16" Stud Diameter Rocker Arm for Big Block Chevrolet

Competition Cams 1620-16 Ultra Pro Magnum Roller 1.7

The Ultra Pro Magnum Roller Rocker Arms for Chevy V8 396-454 applications not only live up to the lofty standards of the original Pro Magnums, but they also take stud mount rocker performance, stability and value to a whole new level. These rocker arms feature a 7/16" stud diameter and 1.7 ratio. The 8650 chromemoly material and arched, web-like design deliver increased strength and rigidity while still reducing the moment of inertia and optimizing the dynamic balance. A unique black oxide exterior finish helps prevent corrosion and increases durability. Featuring oversized trunions, precision-sorted needle bearings and hardened roller tips for the ultimate in performance and dependability. Optimized retainer and valve spring clearances allow for use of most diameter springs, retainers and +.050" locks without clearance or fitment issues.

  • Brand: Comp Cams
  • ASIN: B003HGQQ52
  • UPC: 036584196051
Similar Roller Rocker Arms Shopping Results