Pentek DGD-5005 Spun Polypropylene Filter Cartridge, 10" x 4-1/2"

Pentek DGD-5005 Spun Polypropylene Filter Cartridge, 10" x

This Pentek DGD-5005 spun polypropylene filter cartridge reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water. It has two separate gradient layers for higher particle reduction efficiency and dirt-loading capacity than standard spun or string-wound cartridges. The nominal filtration rating of the pre-filter layer is 50 microns, and the rating of the post-filter layer is 5 microns. The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria. It has an initial pressure drop of less than 1 pound per square inch (psi) at a flow rate of 10 gallons per minute (gpm), and operates over a temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C). This spun polypropylene filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for treatment of residential, commercial, and municipal drinking water.SpecificationsNominal filtration rating (pre-filter)50 micronsNominal filtration rating (post-filter)5 micronsInitial pressure drop at 10 gpm

  • Color: White
  • Brand: Pentek
  • ASIN: B001V8IVCE
  • UPC: 163120791279

Campbell SED-P10 Sediment Filter Cartridge, Spun Polypropylene Fiber, 10 Micron, 2 Pack

Campbell SED-P10 Sediment Filter Cartridge, Spun Polypropylene Fiber,

Use the SED-P10 filter cartridge for sediment reduction in potable cold water, for use with chlorinated or non-chlorinated well water. Replace 3 or 4 times a year depending on water quality.

  • Color: White
  • Brand: Campbell
  • ASIN: B01F9MVMB4
  • UPC: 088409164707

Bon 32-504 3/4-Inch Nylon Concrete Fibers

Bon 32-504 3/4-Inch Nylon Concrete

Recommended dosage is 1 pound per cubic yard of concrete. Exceeds ASTM C-1116-95 specifications.

  • Brand: BON
  • ASIN: B000COCDCM
  • UPC: 743153325049

24 pk Pentek 155014-43, P5 9-3/4" x 2-3/8" 5 Micron Sediment Melt Blown Filters Cartridges Spun Polypropylene

24 pk Pentek 155014-43, P5 9-3/4" x 2-3/8"

24 Pack of 5 Micron 10" replacement sediment filters. Pentek Brand FITS BUT NOT LIMITED TO: Ametek, Brio, Culligan, Cuno, Cuno Aqua-Pure, Flowmatic, GE, Glacier Bay hdg2vs4, KemFlo, Kenmore, Omni, 3M Purification, Pentek, Pentek Heavy Duty 10" Filter Housings, Pentek 3G Heavy Duty 10" Filter Housings, Pentek 3G Heavy Duty 10" Filter Housings, Sears, US Filter, Watts/Flowmatic Standard 10" Filter Housings, Whirlpool: WHKF-GD05, WHKF-DWHV, WHKF-DWH, WHKF-DUF, and many more. Multi Versatile, Individually Wrapped, with Genuine Brio Certified Sterile Packaging. 5 Micron Rating, NSF Certified. Meets FDA requirements for food and beverage contact. Greater dirt holding ability and longer life than non-layered cartridges. Great for Whole Home, Wells, Reverse Osmosis Pre-Stage or Stage One Filtration Quality Water Begins With High Quality Sediment Filtration, Gold Metal Winner, (See description below for some of the compatible filter housings of this product)

  • Color: White
  • Brand: Pentek
  • ASIN: B00ML2I7IW

Pentek P5 Spun Polypropylene Filter Cartridge, 9-3/4" x 2-3/8", 5 Microns

Pentek P5 Spun Polypropylene Filter Cartridge, 9-3/4" x

This Pentek P5 spun polypropylene filter cartridge reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water. It has a nominal filtration rating of 5 microns at an efficiency of 85%. The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria. It has an initial pressure drop of 0.2 pound per square inch (psi) at a flow rate of 5 gallons per minute (gpm), and operates over a temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C). This spun polypropylene filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for treatment of residential, commercial, and municipal drinking water.SpecificationsNominal filtration rating5 micronsInitial pressure drop at 5 gpm0.2 psiTemperature range40 to 145 degrees F (4.4 to 62.8 degrees C)Maximum dimensions (H x W)9-3/4 x 2-3/8 inches (248 x 60 mm)Materials certificationNSF/ANSI standard 42The nominal filtration rating is for a particle removal efficiency of 85%.H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Water filters remove undesirable particl...

  • Color: White
  • Brand: Pentek
  • ASIN: B000QECW24
  • UPC: 051678014431

Pentek 155358, DGD-5005-20 Dual Gradient Density Polypropylene Sediment Cartridge

Pentek 155358, DGD-5005-20 Dual Gradient Density Polypropylene Sediment

This Pentek DGD-5005-20 spun polypropylene filter cartridge reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water. It has two separate gradient layers for higher particle reduction efficiency and dirt-loading capacity than standard spun or string-wound cartridges. The nominal filtration rating of the pre-filter layer is 50 microns, and the rating of the post-filter layer is 5 microns. The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria. It has an initial pressure drop of less than 1 pound per square inch (psi) at a flow rate of 20 gallons per minute (gpm), and operates over a temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C). This spun polypropylene filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for treatment of residential, commercial, and municipal drinking water.SpecificationsNominal filtration rating (pre-filter)50 micronsNominal filtration rating (post-filter)5 micronsInitial pressure drop at 20 gpm

  • Color: Original Version
  • Brand: Pentek
  • ASIN: B001VXW0U8
  • UPC: 051678358436

Aquaboon 5 Micron 10" x 2.5" String Wound Sediment Water Filter Cartridge | Universal Replacement for Any 10 inch RO Unit | Compatible with WP-5, AP110, CFS110, P5, WFPFC4002, WP-5, CW-MF, 6-Pack

Aquaboon 5 Micron 10" x 2.5" String Wound

6 OF 5 MICRON 10'' X 2.5" STRING WOUND SEDIMENT PP WATER FILTER REPLACEMENT CARTRIDGE BY AQUABOON The string wound sediment filter is a cost-effective solution for the reduction of sand, silt, rust, dirt and scale particles. String wound filter cartridge is made from 100% polypropylene cord. The filter cartridge is suitable for residential as well as commercial applications. This sediment type filter is suitable for both well and municipal water. Features: Micron rating: 5 Micron Dimensions: 10" x 2.5" Lifetime: Replace two or three times a year, depending on the water quality that comes from the original supply Larger particles are trapped in the outer layers; smaller particles penetrate deeper Thermally bonded polypropylene micro fibers for purity and chemical compatibility No surface binders to reduce flow and increase change-out frequency Cartridge is individually shrink wrapped COMPATIBLE FILTERS AND HOUSINGS: American Plumber W5W, WP5, 155186-52, WP-5, Ametek WP-5, Aqua-Pure AP110, AP010, Bruner WP-5, Bunn ED-S-1, S5-10, Campbell ISS, ClearChoice 84621, Whirlpool WHKF-WHSW, WHCF-WHSW, Cornelius COR105, COR120, Culligan P5, WP-5, Cuno CFS110, Dupont WFPFC4002, PFC4002, Durable Manufacturing 5WPP10, Ecolab 9320-1135, Everpure DEV910908, Evoqua Advantage FCPXF0905, ...

  • Color: White
  • Brand: Aquaboon
  • ASIN: B01M19WKI0
  • UPC: 817905020572

Hydronix CB-45-2005 NSF Carbon Block Filter 4.5" OD X 20" Length, 5 Micron

Hydronix CB-45-2005 NSF Carbon Block Filter 4.5" OD

This Hydronix CB-45-2005 carbon block filter has a particle retention size of 5 micron, and is suitable for drinking water filtration applications. It has coconut shell activated carbon filter media to reduce unpleasant taste and odor from drinking water. This filter has a 4.5" outside diameter (OD) and an overall length of 20". It has an operating temperature range of 40 to 180 degrees F, and a maximum pressure rating of 250 pounds per square inch (psi). This carbon block filter is certified by the National Sanitation Foundation (NSF) Standard 42 for material requirements only, and is suitable for use in water dispensing applications where higher chlorine levels are present.Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more t...

  • Color: White
  • Brand: Hydronix
  • ASIN: B00D04CAPQ
  • UPC: 798527470832

Filtrete Standard Capacity Whole House String Wound Water Filters, 10 Microns, Universal Filter, Sump Style Drop-In Filter, 2-Filters (3WH-STDSW-F02)

Filtrete Standard Capacity Whole House String Wound Water

Filtrete standard Capacity Whole House System Refill, 2-pack String Wound. Filtrete Standard Capacity Whole House System Filters filter water throughout your home, protecting your plumbing and appliances from Sand, Sediment, Silt, and Rust. Great for 2 or less bathroom households. Universal filter replacements are available in pleated, string wound, carbon wrap, and grooved filters. Filter life replacements available in 3 and 6 month versions.

  • Color: White
  • Brand: Filtrete
  • ASIN: B00910U1UY
  • UPC: 798527183275

Pentek DGD-2501-20 Spun Polypropylene Filter Cartridge, 20" x 4-1/2"

Pentek DGD-2501-20 Spun Polypropylene Filter Cartridge, 20" x

This Pentek DGD-2501-20 spun polypropylene filter cartridge reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water. It has two separate gradient layers for higher particle reduction efficiency and dirt-loading capacity than standard spun or string-wound cartridges. The nominal filtration rating of the pre-filter layer is 25 microns, and the rating of the post-filter layer is 1 micron. The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria. It has an initial pressure drop of less than 1 pound per square inch (psi) at a flow rate of 20 gallons per minute (gpm), and operates over a temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C). This spun polypropylene filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for treatment of residential, commercial, and municipal drinking water.SpecificationsNominal filtration rating (pre-filter)25 micronsNominal filtration rating (post-filter)1 micronInitial pressure drop at 20 gpm

  • Color: White Body
  • Brand: Pentek
  • ASIN: B00207SAEY
  • UPC: 851905131418
Similar Spun Polypropylene Fiber Shopping Results